Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 74,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_680492_1Bid Award Id
ViewTender No
GE (W)/HSR-58/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height including taking down old cement plaster complete all as specified and directed.
100
-
-
... More
M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 1.5mm (average) thick wall care putty complete all as specified and directed.
250
-
-
... More
M&L for complete removal of existing treatment / paint of any description of walls (any number of layers ) by scrapping with steel scrappers or with other mechanical means including applying 1 mm thick wall care putty to smooth finish complete all as specified and as directed and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
50
-
-
... More
M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
150
-
-
... More
M&L for preparation of old plastered or unplastered surfaces of ceiling / soffit and applying one coats of white wash complete all as specified and directed.
300
-
-
... More
M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm in width or girth not otherwise described incl prepartion of new surfaces complete all as specified and directed.
40
-
-
... More
M&L for preparing new plastered or unplastered surface of walls and applying two coats of weather proof paint using roller of .make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture complete all as specified and directed. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of three years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee complete all as specified and directed.
700
-
-
... More
M&L for preparing old plastered or unplastered surface of walls with and including complete removal of existing treatment of any layer of wall using mechanical sander with internal dust extraction system and applying two coats of weather proof paint using roller of .make : apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture complete all as specified and directed. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of three years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee complete all as specified and directed.
550
-
-
... More
M&L Non skid ceramic coloured tiles 8 to 9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4 including dismantling of floor hearth or wall tiling complete all as specified and directed.
75
-
-
... More
M&L for coloured glazed ceramic coloured tiles of size 300X600X7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat in CM 1:3 including dismantling of floor hearth or wall tiling complete all as specified and directed.
200
-
-
... More
M&L for coloured vitrified tiles 10mm thick (square/rectangular) of size 600mm x 1200 mm in floors etc set & jointed with 3-5 mm tiling Spacer tool in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 including dismantling of floor hearth or wall tiling complete all as specified and directed.
150
-
-
... More
M&L for coloured vitrified tiles 10mm thick (square/rectangular) of size 600mm x 1200 mm as in vertical surfaces etc set & jointed with 3-5 mm tiling Spacer tool in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 including dismantling of floor hearth or wall tiling complete all as specified and directed.
10
-
-
... More
M&L for 20 to 25mm thick machine cut Kota stone flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified over and including 20mm thick screed bed in CM 1:3 complete all as specified and directed.
70
-
-
... More
Description all as item No 16.00 above but kota stone slab (100/150mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar and polishing complete all as 1:3 and jointed complete as in single piece kota stone has to be used complete all as specified and directed.
5
-
-
... More
M&L 20mm Granite (of any type )work (table rubbed and polished ) in steps , jambs , pillars , window -cills ,cooking plateforms and like in cement mortar (1:4) including pointig in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including provision of screed bed 20mm thick in CM 1 :4 complete all as specified and directed.
15
-
-
... More
Rounding to edges of stone edges such as in steps/ cooking platform and other similar situations complete all as specified and directed.
10
-
-
... More
M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed including taking down of pipe complete all as specified and directed.
75
-
-
... More
Description all as item No 20.00 above 15 mm bore but taking down and refixing the GI pipe with all fittings complete all as specified and directed.
10
-
-
... More
M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade concealed including taking down of pipe complete all as specified and directed.
110
-
-
... More
Description all as item No 22.00 above 20 mm bore but but taking down and refixing the GI pipe with all fittings complete all as specified and directed.
10
-
-
... More
S&F in repairs 15mm bore CP Bib taps Long Body Half turn/Quarter turn , cast copper alloy fancy type chromium plated and fixed complete all as specified and directed. Make: Cera or Somany or Essco
6
-
-
... More
S&F in repairs 15mm bore CP Two Way Angle valve cast copper alloy fancy type chromium plated and fixed complete all as specified and directed.
Make: Cera Cat No G1017211 or Essco Cat No MQT-526AFKN or Somany 27221150061
6
-
-
... More
S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.
Make: Cera Cat No G1017201 or Essco Cat No C05103051B or Somany Cat No Chrome 272111370011
24
-
-
... More
S& F in repair PVC connection 450 mm long 15mm dia complete all as specified and directed.
30
-
-
... More
S&F in repair brass chromium plated Basin Mixer single lever for counter top WHB complete all as specified and directed. Make: Cera Cat No G1017451 or ESSCO-SQT-526NKN or Somany Chrome 272211400011
6
-
-
... More
S&F in repairs 15mm dia 3 in 1 CP Brass wall mixture chromium plated fancy type for mixing hot and cold water screwed down for iron pipe and fixed in position complete all as specified and directed.
Make: Cera Cat No. F1018401GG or ESSCO Cat No. STE-107273 or Essco Cat No 272201140011
6
-
-
... More
S&F in repairs vitreous china one peice wash down water closet pan (padestal pattern ) including P / S trap and soft close seat cover with hinging device and CP jet spray with hanging device all necessary work required for fixed in position complete all as specified and directed.
Make: Cera Cat No. A1014110 or ESSCO Cat No. ECS-WHT-851S220NPP or Somany 'SWISS'
6
-
-
... More
S&F in repair CP cardiff brass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as specified and directed.
6
-
-
... More
S&F in repair vitreous china counter top wash hand basin (Size 560x455x200mm) colour brilliant / off white including waste pipe and waste coupling over and including prepolished granite top RCC platform of size 800 x 500mm size complete all as specified and directed. Make: Cera Cat No S2030120 or Somany Cat No IMPREZA or Essco AIS-WHT-101905
6
-
-
... More
S&F in repair bevelled edge mirror of 5 to 6 mm thick selected quality glass, 600 x 450 mm size, mounted on 2 to 3 mm thick PVC sheet and PVC moulded beading and fixed to wooden plugs with Chromium plated brass screws and cup washers complete all as specified and directed.
6
-
-
... More
S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.
6
-
-
... More
S&F in repair brass chromium plated shower rose 250mm size fitted to steel pipe or union along with leg and other fitting complete all as specified and directed.
Make: Cera or Essco or Somany
6
-
-
... More
S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw complete all as specified and directed.
Make: Cera Cat No F5013110CH or Essco AEC-1151N or Somany 272130740041
6
-
-
... More
S&F in repair for toilet bath cabinet with mirror of size 600 X 450mm and approved make complete all as specified and directed.
6
-
-
... More
S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed.
Make: Cera Cat No F5011101CH or Essco AEC-1181N or Somany 272130160081
6
-
-
... More
Treatment of sunken floor slab compraises of the following specifications and complete all as specified and directed. :-
(i) M&L for Demolition/cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm average thickness PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg bag of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and direced by EIC. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg bag of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. (ix) after above process, sunken portion shall be filled with PCC 1:5:10 completely and 40 mm thick PCC 1:3:6 shall be provided at the top surface.
Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.
15
-
-
... More
Supply only water proofing compound complete all as specified and directed.
5
-
-
... More
S&F, PVC floor trap 75mm bore with grating including jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
18
-
-
... More
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.
70
-
-
... More
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.
40
-
-
... More
S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.
25
-
-
... More
S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.
12
-
-
... More
S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
6
-
-
... More
S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
6
-
-
... More
Supply and fixing in repair Rotational Molded polythylene water storage tank three layer white 1000 ltr capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position including dismantling of existing water storage tank complete all as specified and directed.
6
-
-
... More
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
6
-
-
... More
S & F in repair gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.
12
-
-
... More
Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.
30
-
-
... More
Taking down chowkats or frame without taking off shutters (with or without glazing and ventilator) not exc 1.5 Sqm each complete all as specified and directed.
30
-
-
... More
S&F Providing and fixing anodised Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, sliding windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate any sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief complete all as specified and directed.
Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, rollers for sliding and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid seperately.
550
-
-
... More
S&F Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, handle 2 Nos in each door,anodised alumnium snap beading, screws etc. complete all as specified and directed.
Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid seperately.
70
-
-
... More
S&F for 5.5 mm thick dark coloured glass for doors Iincluding black film for making glass opaque and windows/ frosted dark coloured glass for ventilators in aluminium door windows and ventilators partitions including ped/gasket complete all as specified and directed.
60
-
-
... More
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to powder coated windows and doors complete all as specified and directed.
50
-
-
... More
S&F powder coated aluminium deco grill fixed to powder coated windows and doors complete all as specified and directed.
50
-
-
... More
M&L Aluminium die cast body door closer hydraulically regulated,designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed in repair complete all as specified and directed.
30
-
-
... More
S&F for Aluminium Motrice lock 4 levers, vertical type 75mm size for aluminium doors complete all as specified and directed.
30
-
-
... More
Providing and fixing RAJSHRI factory made 100% solid WPC (wood polymer composite)- door frame of size 50mmx65mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for external uses complete all as specified and directed.
28
-
-
... More
Providing and fixing RAJSHRI 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.
12
-
-
... More
S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as required for cupboards (consisting two shutters) including 06 Nos hinges and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved complete all as specified and directed.
Note : Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed.
Note: front face shall only be measured for payment purpose.
20
-
-
... More
M&L Prelaminated PVC solid Board ,18/19 mm thick ,Prelaminated on both side with decorative choice lamination , including pasting with solvent chemical as required at site or fixed with screws complete as in Kitchen Cupboard, room cupboard ,shelves / partition including fixing arrangement on walls all as spd and directed by Engr-In-Charge including taking down of cupboard and all as specified including dismantling of board complete all as specified and directed.
14
-
-
... More
S&F superior quality ,heavy type SS rail (grade -304) (Cu rtain rod/drapery rod), 20mm dia with and including fency type SS bracket 2 Nos for each opening and SS side Knob (fency type) of required shape and size 2 Nos of each opening in repair complete all as specified and directed.
70
-
-
... More
Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15cm thick below or above ground level including removal of other things complete all as specified and directed.
21
-
-
... More
M&L Brick work with burnt bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete including demolition of brickwork complete all as specified and directed.
20
-
-
... More
Dismantling brick tiles in single layer on roof (laid dry and pointed) complete all as specified and directed.
17
-
-
... More
Demolition Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof)and removing debries out of MD land complete all as specified and directed.
17
-
-
... More
M&L for providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in roof kerbs, Roof padding finishing surface of concrete topping even and fair(without using extra cement) all as specified of average thickness in slope 1:40 over roof complete all as specified and directed.
12
-
-
... More
M&L Screed bed or bedding layer of mortar 10mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC on roof surfaces complete all as specified and directed. Note : WPC shall be measured and paid seperately.
170
-
-
... More
M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) with white mineral gravel finish on upper side of membrane laid by torch application method with overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete APP membrane complete all as specified and directed.
185
-
-
... More
M& L for 50mm thick PCC 1:3:6 type C-2 (Using 20mm gradede crushed stone aggregate ) as in plinth protection including mastic filling in joints complete all as specified and directed.
65
-
-
... More
Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.
5
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
150
-
-
... More
S&F,MS framed work such as grill grating,joists, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.
200
-
-
... More
M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture SIKA Plasto creat plus or equivalent make in Fosroc / Thermax as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. the gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions complete all as specified and directed.
15
-
-
... More
Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar complete all as specified and directed.
5
-
-
... More
Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed.
Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.
5
-
-
... More
M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.
30
-
-
... More
M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness of upto 10mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.
30
-
-
... More
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.
30
-
-
... More
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
18
-
-
... More
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
12
-
-
... More
S&F 150 mm dia(6") reinforced concrete pipes,class NP2 with one collar per length of pipe and laid in trenches or in floors including clearing of site as per site requirement complete all as specified and directed.
60
-
-
... More
Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed.
60
-
-
... More
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.
60
-
-
... More
Cutting into existing manholes for connecting new drains, 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.
2
-
-
... More
Mild steel TMT bars 6 mm and above dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
100
-
-
... More
M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square / rectangular / circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:4 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete all as specified and directed.
1
-
-
... More
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
250
-
-
... More
M & L for 75mm thick cement concrete type B – 1 (1:3:6) using 20mm graded stone aggregate as in Floor/path and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
250
-
-
... More
M&L Chequered cement concrete tiles 30 cm X30 cm X 25 mm thick over 15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with gray cement and pigment and complete all as specified and directed.
200
-
-
... More
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified including dismantling of old asbestos cement/galvalume corrugated or semi corrugated sheets complete all as specified and directed.
40
-
-
... More
Providing and fixing RAJSHRI brand factory made 24 mm thick 100% solid WPC (wood polymer composite) JALI of required size and colour comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 N (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges/fasteners of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed.
40
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
3
-
-
... More
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete all as specified and directed.
1
-
-
... More
S&F PVC 5mm thick heavy duty PVC & Aluminium composite louvers of wall lining/panelling of wood grain printed colour on one side and inclusive of solvent cement and fixing at site inclusive of framework as required and as per specifications and drawing including dismantling of old wall panelling complete all as specified and directed.
145
-
-
... More
Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.
200
-
-
... More
Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.
104
-
-
... More
Description all as per item No 99.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.
36
-
-
... More
Description all as per item No 99.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.
36
-
-
... More
Description all as per item No 99.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.
24
-
-
... More
S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed
176
-
-
... More
S&F Modular switch 1 way 16A 1 module all as specified and directed
24
-
-
... More
S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.
72
-
-
... More
S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.
24
-
-
... More
S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.
36
-
-
... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
6
-
-
... More
S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.
50
-
-
... More
S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.
12
-
-
... More
S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equivalent in Philips, Havells.
40
-
-
... More
S&F Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.
6
-
-
... More
Supply and fixing in repair MCBs SP 6 to 32Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB
30
-
-
... More
Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.
Note : Make of the MCB should be the same as that of DB
6
-
-
... More
S&F in repair Sheet metal enclosure distribution board TPN, 4way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed .
1
-
-
... More
Supply and fixing TPN 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.
Note : Make of the MCCB should be the same as that of DB
1
-
-
... More
S & F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.
4
-
-
... More
Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.
103
-
-
... More
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.
103
-
-
... More
M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
2
-
-
... More
Taking down old unserviceable Ceiling fan and refixing the same afer re-winding the fans and painting wit white enameled apaint with smooth surface complete all as specified and directed.
12
-
-
... More
M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type ac ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as specified and directed.
6
-
-
... More
M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked complete all as specified and directed.
6
-
-
... More
Supply and fixing modular bell push 6A 1 module complete all as specified and directed.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements