Western Railway Tender
... More
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
Bid capacity = (A x N x 2) – 0.33 x N x B
Technical Capacity
... View More
The required prior work experience for the bidder includes details of technical eligibility fulfillment, which encompasses a list of eligible similar works and user work completion certificates. The bidder needs to provide details of works completed and contractual payments received in the last 3 financial years + the current year. The required prior work experience for the bidder includes successfully completing or substantially completing any one of the following categories of work(s) during last 07 (seven) years:
- Three similar works each costing not less than 30% of advertised value of the tender.
- Two similar works each costing not less than 40% of advertised value of the tender.
- One similar work costing not less than 60% of advertised value of the tender. For composite works, the tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years:
- Three similar works each costing not less than 30% of advertised value of each component of tender.
- Two similar works each costing not less than 40% of advertised value of each component of tender.
- One similar work each costing not less than 60% of advertised value of each component of tender. For subletting of work, the subcontractor must have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sublet, in the last 5 years. However, for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for. The values and percentages mentioned are:
- 30% of advertised value of the tender for three similar works
- 40% of advertised value of the tender for two similar works
- 60% of advertised value of the tender for one similar work
- 35% value of work to be sublet for subletting of work
- Rs 50 lakh for subletting of work where no previous work experience is required.
Costs
EMD
₹ 3,16,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Part Supply Of Signaling Material, Installation, Testing & Commissioning In Connection With Reliability Improvement And Replacement Of Defective/overaged Midlife Signalling Gears Of Mahesana -palanpur And Mahesana -varatha Section In Ahmedabad Division.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DRM-SnT-ADI-Sig04of25-26-AHMEDABAD DIVISION-S AND T/WESTERN RLYTender No
DRM-SnT-ADI-Sig04of25-26Tender Authority
Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non-flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. . One of the 04 following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. Color -Bright Orange; Min Weight = 4kg. Test Check by Consignee & Sample check by JAG officer.
50
1912
95610
... More
Medium Class G.I. Pipes to IS: 1239 (Pt.)-2004 or latest; 100mm dia. (int. Dia) 3.65 mm thick or above with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes.
-
-
5
... More
ARA Terminal blocks with links made of PBT Spec No.s/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.
5000
75
375000
... More
SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/948 dt. 26.04.2011 (Single app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply.
5
59855
299279.9
... More
SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/945 dtd 03.03.2011 (Half app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply.
5
51998
259990.3
... More
IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8
10
5388
53886.7
... More
Supply of Battery Charger self-regulating floor mounting type with 230V AC single phase input and output 24 V DC, 20A to specn. IRS-S- 86/2000 with latest amendment for Axle counter application. (Amdt. 4).
2
34732
69464.8
... More
Provision of Field accessories of DC Track Circuits Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiber glass/SMC/FRP along with terminal blocks.
180
1120
201717
... More
Miniature, Plug in Type, M to C,DC Neutral ,Track relay, ACI, Style QTA2, 9 Ohm, 2F-1B contact, Code - FGHKX Spec : BRS :939-A & 966 (Appx-F2) & IRS : S-23, S-23,S-34 & 60.
180
4878
878202
... More
Miniature, Plug-in Type, DC Neutral Line Magnetically Latched Relay, Style QL1, 24 V DC, 11F-4B Contact, Code ABDEG Spec: BRS:935A ; IRSS 34 ; IRS S 23.
150
7390
1108566
... More
Plug in Type, Tractive Armature, AC Immunized, DC Biased Contactor Relay, Style QBCA1,2HF-4B Contact,24 V DC, Code BCEJK Spec:BRS:943 ; IRS S 34 ; IRS S 23 ;IRSS 60-78.
150
7393
1109052
... More
Miniature, Plug-in Type, DC Neutral Line AC Immunized Relay, Style QNA1, 24 V DC, 8F- 8B/12F-4BContact, Code ABDGH/ABDFH Spec: BRS: 931A; IRS S 34; IRS S 23; IRS S 60-78.
100
5576
557604
... More
Earth Electrode as per Drg. No. CSTE / 6091.
-
-
16
... More
Calling ON Signal Unit with Brackets & Fixing accessories. Calling On Signal Unit shall conform to RDSO Drg no 24351(Adv.) Alt1 suitable to LED Signal Lighting Unit.
2
2669
5338.86
... More
Digital low current clamp meter to measure current leaks (parasitic draw down to 1 18 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply.
5
18194
90971.7
... More
Failure Analysis System or Central Monitoring Unit with Printer. As per technical 19 specification IRS: S-992006 (Amdt-3) or latest. The specification of Failure Analysis System should be got approved from the Engineer in charge before supply. The Specification of Failure Analysis System shall be as per technical specification given in contract Agreement or higher version as approved by Engineer In-Charge. (Technical specification shall be provided in tender documents.)
2
287336
574673.82
... More
750 VA Off line UPS with battery backup 3 Hours for Failure Analysis System of reputed make as per Engineer in-charge.
5
33329
166645.25
... More
Supply of in-built GNSS based cable route tracer with 10W, 500mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP andRTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200GS or similar.
-
-
21
... More
Office Chair makes Godrej CH-7B or similar of reputed brand will be specified by Engineer in-charge.
20
2655
53119.4
... More
Office Revolving Chair Godrej Make Model No.9u02r Bravo Or Similar of reputed brand will be specified by Engineer in-charge.
40
8188
327532
... More
Maintenance Free Earth Electrode of length 3m, including supply of 3 bags of Earth enhancement material for earthling (10KGs /bag) for each electrode & other accessories as per Drg. No. SDO / RDSO/ E&B/001 and RDSO Spec No. RDSO / SPN/197/2008.
30
10403
312092.4
... More
Rubber Mat for Power Equipment room. (5mm thick).
-
-
25
... More
Indicative type Fuse suitable to G type fuse base/holder of capacity 0.63 A - 3.0 A. (System, Rapid, Malnad or RBCO make or similar).
1000
18
18600
... More
Indicative type Fuse base/ holder with cap, suitable to G type fuse of capacity 0.63A - 3.0A. (System, Rapid, Malnad or RBCO make or similar).
1000
50
50990
... More
Indicative type Fuse Without holder 6A (System, Rapid or Malnad or RBCO make or similar) as per IRS: S-80/92.
500
34
17220
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4 & Spec No IRS S 29 75/2006 with the latest amendment. The fuse block shall be suitable for round-head type voltage fuses. This also includes the supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
601
129
77775.41
... More
HRC fuses block complete with 2A fuse link as per IS 9224/79.
-
-
30
... More
PPTC fuse 12V GP 16-400 (2A) for TF/TR circuit, make Raychem, Epcos, Siemens
-
-
31
... More
D type fuse block non indicating type low voltage non deteriorating fuse base suitable for fuse link of capacity 2A/6A/10A as per specification IRS:S-80/92 or latest Quantity break up of each type of fuse block will be specified by Engineer in-charge.
600
31
19158
... More
D type fuse link non indicating type low voltage non detonating, capacity 2A/6A/10A as per specification IRS: S-80/92 or latest. Quantity break up of each type of fuse block will be specified by Engineer in-charge.
600
34
20916
... More
Round head type non deteriorating type low voltage cartridge fuse as per Spec No IRS/S/78/92 with latest amendments 2A/4A/6A capacity.
600
57
34326
... More
Transient Surge Suppressor Electronic Grade Surge protective device (Surge) current Capacity 50 KA as per following Specifications: 1) Connection Type: Parallel, 2) Nominal discharge current: 3KA 3) Response Time: <0.5nanoseconds, 4) Status Indication: LEDs, Dry Contacts.
2
54745
109490
... More
Supply of Cable Fault locator as per specification attached. Make: Tempo/Stanley Communication Model Sidekick Plus Kit Standard (1155-5001) or equivalent.
1
578945
578945.76
... More
Pad locks Godrej make, Hardened NavTal 7 lever, 65mm Dia with common key or similar product having same feature & technical data.
50
196
9839.5
... More
Excavation of cable trench as per cable route plan, 1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes 02 etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
1800
839
1510200
... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm Dia & shall be done at the depth of minimum 1200 mm from the 03 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtr long. The HDD with or without HDPE pipe as per direction of Engineer In charge. Note: HDPE pipe supply is taken as separate item. This item also includes cable laying (HDD boring).
900
1187
1069065
... More
Placing of DWC/RCC pipes along with collars in trenches at places of track and road crossings, platform cuttings etc. also for straight cable laying. (Cable laying is covered separately.)
-
-
4
... More
Fixing of ARA Terminals /Screw less connectors and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry.
5000
22
113750
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination rack etc. at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends 07 of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
10000
23
237000
... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials 08 including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost Single Case as per Drg No SK 748 or CSTE/5074 or SS Location
5
7162
35813.15
... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials 09 including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost Half Case as per Drg No SK 747or CSTE/5074 or SS Location.
5
5487
27439.3
... More
Fabrication and fixing of SMC sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with 10 contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site. Note: SMC sheet will be taken in place of phenolic laminated sheet. Single Case
200
2445
489072
... More
Fabrication and fixing of SMC sheet in location box by providing all fixtures as per 11 Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site. Note: SMC sheet will be taken in place of phenolic laminated sheet. Half Case
100
777
77778
... More
Preparation and fixing of location box board on 03 mm ACP sheet with size 12 x 18 size A3 for location box including pasting of printed/ painted vinyl sheet and lamination (printing/painting of location detail on vinyl sheet covered in schedule item separately).
200
239
47946
... More
Shifting of existing full location boxes coming in the alignment of new line. The work includes losing & removal of soil around location boxes by excavating soil around foundation, making 13 of pit for shifting of location box horizontally opposite to railway track up to 0.5 to 1.0 mtr. This includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Location Boxes. Location box shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in-charge at site. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
10
4369
43699.3
... More
Shifting of existing half location boxes coming in the alignment of new line. The work includes losing & removal of soil around location boxes by excavating soil around foundation, making 14 of pit for shifting of location box horizontally opposite to railway This includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Location Boxes. Location box shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in-charge at site. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
10
3379
33797.2
... More
Foundation, Erection, Painting & Writing Work of Full Location Box.
-
-
15
... More
Charging of Lead Acid Batteries (2V 80AH) with contractors' own battery grade 16 sulphuric acid and distilled water with a minimum of two charge-discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per the extant practice of W.Rly & instruction of the Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by the contractor & Rly's site-in-charge.
1200
376
451320
... More
Foundation, Erection & Installation of CLS without route indicator. Excavation and 17 Casting of foundation for main signal post as per CSTE/3122 (WR) with contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.
15
12887
193307.7
... More
Foundation, Erection & Installation of CLS without route indicator. Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards with contractor's own brackets and fixing materials. This also includes erection of auxiliary 18 signals like calling on, shunt signal if any... The work shall be done as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In- Charge at site. It also includes supply of padlock for signal units and cable termination box. X' arms to be provided by the contractor till the signals are introduced. The Item includes cutting of Signal post if required by Site In charge. 2/3/4 aspect signal unit mounted directly on signal post
15
8338
125081.1
... More
Shifting of existing Signal along with foundation as per site requirement. This inclusive of required labour, machinery like hydra, JCB etc
15
8199
122993.7
... More
Supply Color Light Signal Accessories. Supply of signal no plate as per Drg no CSTE Drg No CSTE/6186.
150
615
92338.5
... More
Fixing of Electrical Point Machine on the extended sleepers at points as per std. 21 practice and as per RDSO Drg No. SA 91 51-52 or 9710 or 9161 as per section of rails used. Item includes fixing switch extension bracket, providing insulation for switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting the point machine with crank handle. The item also includes : (i) Complete material for installation like ground-connections, switch extension brackets, point insulation material, I pipes, wiring materials, various fixing nuts & bolts including castle nuts, spring washers (ii) All smithy & fitting works required at site for complete installation. (iii) Installation of gauge tie plate & providing insulation for gauge tie plate (Insulation in William Stretcher Bar will be Provide by Railways). (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes / location box /cable hut as per extent practice on WR and the instruction of Railway Engineer at site. (v) Supply and fixing of suitable size GI pipes with flange for taking cable into point machine. Note ; The ground connections shall be suitable to the Point Machines as specified by Engineer-in-charge and shall be suitable to the point lay out i.e. 60 Kg. / 52 Kg / 90R as per yard layout. Electrical Point Machine and M-6 / Screw less terminals will be supplied by Railways / covered in Schedule separately.
20
22354
447090.6
... More
Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 22 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 &instructions of Rly engineer at site.
300
1391
417393
... More
Transportation of S&T material leading up to 1 Km including Loading from Starting point, unloading & Stacking at destination.
1000
452
452580
... More
Extra for each additional 1 Km or part thereof
-
-
24
... More
Supply, Installation and Commissioning of EI VDU (Visual Display Unit, 4K with all suitable accessories Compatible to El Interlocking in Safe Mode 24x7 at controlling station. The item must comply minimum following specification:- a) Screen Size (Diagonal):- As below b) Resolution :- 4K 26 c) Viewing angle degree: - 178x178 degree d) Brightness :- 500 Nits e) contrast ratio 4000:1 f) Backlit :- Direct LED g) Jack Interface: - HDMI -3 no. 1.2 DP, DVI USB 2.0 -2 no. CI Slot RF In AV In Component In (RCA5 Type) Digital Audio Out RGB In (D-sub 15pin)-PC PC Audio Input RS232C (D-Sub 9pin) RJ45 Stereo mini jack. h) Optical Out :- Available Note: - Screen size will be decided as per instruction of engineer incharge. Approximate Screen size 43 inch
2
62095
124190
... More
Supply, Installation and Commissioning of EI VDU (Visual Display Unit, 4K with all suitable accessories Compatible to El Interlocking in Safe Mode 24x7 at controlling station. The item must comply minimum following specification:- a) Screen Size (Diagonal):- As below b) Resolution :- 4K 27 c) Viewing angle degree: - 178x178 degree d) Brightness :- 500 Nits e) contrast ratio 4000:1 f) Backlit :- Direct LED g) Jack Interface: - HDMI -3 no. 1.2 DP, DVI USB 2.0 -2 no. CI Slot RF In AV In Component In (RCA5 Type) Digital Audio Out RGB In (D-sub 15pin)-PC PC Audio Input RS232C (D-Sub 9pin) RJ45 Stereo mini jack. h) Optical Out :- Available Note: - Screen size will be decided as per instruction of engineer incharge. Approximate Screen size 55 inch
2
86637
173274
... More
Installation of Earth Electrode including MS flat for clamp etc. and connection to signalling equipments, lever frames, apparatus cases, signal, relay rack, block instrument, etc. as per technical specification given. This item includes digging of pit in earth 3 M deep & fixing earth 28 electrode pipe, casting of cement concrete enclosure & cover as per RDSO/SPN/ 197/2016.Soiltreatment to be done as per std. practice. This item includes provision of MS Flat, Earth lead wires and Soldering of lead wires. The other end of the wire is to be connected to block equipment, power equipment, cable sheath, and signals etc. as per site requirements. 7strand GI wire shall be used as earth lead wire. Supply of earth electrode is covered in other Item').
100
5579
557977
... More
Earthwork in filling in embankment, guide bunds, around buried type abutments, 29 bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines and specifications and special condition of contract including all leads, royalty, lifts, ascents, descents, crossing of nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and setting out of profile, site clearance, removing of shrubs, roots of vegetation growth, heavy grass, benching of existing slope of old bank, all handling/re-handling. Taxes, Octroi and royalty etc. as a complete job. Cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special conditions of contract.
1000
154
154510
... More
Cement concrete work for miscellaneous items in the ratio 1: 3: 6. Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
8
6259
50072
... More
Fabrication and fixing of 'A' Marker (Drg No. CSTE/6180), 'AG' Marker (Drg No. 31 CSTE/6181), 'P' Marker (Drg No. CSTE/6182), Arrow Marker (Drg No. CSTE/6183), 'G' Marker (Drg No. CSTE/6184), 'C' Marker (Drg No. CSTE/6185). Marker disk on signals as per standard practice All material required for this work shall be supplied by Contractor.
150
1280
192123
... More
Installation of Maintenance Free Earth Electrode for Maintenance Free Earth spec of RDSO/SPN/197/2008.
30
1456
43703.7
... More
Hiring of JCB Machine (in good working condition) for leveling and dressing 33 ground/dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the states of operation, as per instructions of engineer incharge and vehicle shall not be more than three years old.
200
1084
216976
... More
Installation and commissioning of various classes of lightening cum surge protection device as decided by site engineer. This include supply and fixing of any other material required to complete the installation &commissioning of lightening cum surge protection device.
2
299
599.48
... More
Supply & Fixing of Stop Board, Block section limit Board, goods warning board and all other boards with contractors own material. The work shall be done as per instruction of Rly. Engineer incharge as per IRSEM.
10
5732
57329.2
... More
Supply of Fiber/ SMC/FRP/RCC Earth Chamber.
-
-
36
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. 37 Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in- charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974). Main Signal Post with Signal Units, Surface base and complete fittings as per Western Railways standard practice.
50
382
19108.5
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. 38 Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in- charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974). Shunt signal post with signal unit, surface base as per Western Railway's Standard Practice.
50
231
11550
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. 39 Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in- charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974). Track Lead Junction Box. (Black enamel outside only).
250
65
16445
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the 40 following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in- charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974). Point Machine with ground connections complete (Point Machine with Black enamel only outside and ground connections with Red Oxide).
100
112
11256
... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. 41 Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in- charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974). LC Gate
5
7522
37610.4
... More
"Providing coloured Ferrules, Cable tags / markers as per WR HQ guidelines for all cables terminated on Full Location Box"
200
531
106200
... More
"Providing coloured Ferrules, Cable tags / markers as per WR HQ guidelines for all cables terminated on. Half Location Box"
100
377
37760
... More
Maintenance of Track mounted equipments like S&T fitting on turnouts including different activities during BCM/TTM/TRR/Engg works as follows:Specially opening and refixing of DC-TC jumpers/AFTC jumpers / Axle counter,transducers during different Engg. works Opening of DC-TC /AFTC jumpers /axlecounter transducers digging work from rail to TLJB /TMU /0 bond /location is 03 requiredto be done as per site requirement also after refixing of DCTC /AFTC jumpers /Axlecounter transducers needs to be buried in proper depth. It includes drilling hole in railas per site requirement. The team to be provided for this work should comprise of :Fitter- 1 Nos., Blacksmith 1 Nos. Mason/Carpenter- 1 No. and Helpers-5 Nos. It alsoincludes any work of EOLB or sliding boom and earthing arrangement of Signallinggears. Any other signalling work as per instruction of Railway Engineer. All T&P & Jigsrequired to execute the work will be supplied by the contractor. (the unit of this itemmay be read as Per Team/Per Day).
365
6605
2411087.8
... More
Supply & installation of Fencing work arround S&T appartus case orbuilding/office etc.
-
-
4
... More
"Corrections in exising Sheet and Printing of all types of Drawings. &Documents."
-
-
5
... More
Panel cum/VDU BlockInstrument table completeasper Drg. No. CSTE/6093. Itincludes any modification to itif required by Engineer-in-charge.
5
62090
310453.15
... More
Levelling of soil ( Earth Work )
-
-
7
... More
CC Work with painting at earth pit ( Per Ring Earth) with supply of earthing chamber
-
-
8
... More
CAT Welding of Maintenance Free Earthing rod
-
-
9
... More
Foundation, Erection, Painting & Writing Work of half Location Box.
-
-
10
... More
"Push Button Switch with 1NO + 1NC or 2NO Configuration of SIMENSmake Suitable to work with Block Panel."
-
-
1
... More
"Plastic Cover for 2 Aspect signal unit opening from front side bottom side. 'X' mark to be painted with white colour covering the entire back side. "
180
55
9939.6
... More
"PLASTIC COVER FOR 3 ASPECT SIGNAL UNIT OPENING FROM FRONT SIDE BOTTOM SIDE. 'X' MARK TO BE PAINTED WITH WHITE COLOUR COVERING THE ENTIRE BACK SIDE "
180
68
12411
... More
"PLASTIC COVER FOR 4 ASPECT SIGNAL UNIT OPENING FORM FRONT SIDE BOTTOM SIDE. 'X' MARK TO BE PAINTED WITH WHITE COLOUR COVERING THE ENTIRE BACK SIDE. NOTE: APPROVAL OF ADVANCE SAMPLE FROM THE CONSIGNEE BEFORE BULK SUPPLY. "
100
84
8484
... More
"PLASTIC COVER FOR SMALL MULTI LAMP UNIT OPENING FORM FRONT SIDE BOTTOM SIDE. 'X' MARK TO BE PAINTED WITH WHITE COLOUR COVERING THE ENTIRE BACK SIDE. "
30
103
3090.3
... More
"PLASTIC COVER FOR CALLING ON OR A AND AG MARKER SIGNAL UNIT OPENING FORM FRONT SIDE BOTTOM SIDE. 'X' MARK TO BE PAINTED WITH WHITE COLOUR COVERING THE ENTIRE BACK SIDE. "
30
31
952.2
... More
"PLASTIC COVER FOR ROUTE SIGNAL UNIT OPENING FORM FRONT SIDE BOTTOM SIDE. 'X' MARK TO BE PAINTED WITH WHITE COLOUR COVERING THE ENTIRE BACK SIDE "
100
49
4991
... More
"PLASTIC COVER FOR SHUNT SIGNAL UNIT OPENING FORM FRONT SIDE BOTTOM SIDE. 'X' MARK TO BE PAINTED WITH WHITE COLOUR COVERING THE ENTIRE BACK SIDE "
180
38
6939
... More
"GALLANT ISOLATED DC-DC CONVERTER (i) DD2410V2, INPUT:110VDC, OUTPUT: 24VDC/10A, Qty: 10 Nos. (ii) DD1210V2, INPUT:110VDC, OUTPUT: 12VDC/10A, Qty: 10 Nos. "
20
29500
590000
... More
"Battery operated Rail core drilling machine with quick action clamping system on track along with 18 mm TCT rail core drill. Maximum core cutting capacity 36 mm, rated speed 10 250/450 RPM. Battery type Lion, Battery voltage 50V, battery pack capacity 4AH. Number of batteries supplied- 2 Nos with suitable charger 1 no. Special designed pressurized internal spindle cooling to give maximum life of core cutter by avoiding heating. 3 sets of 22, 13, 16, 7.2 gauze drills adapters to be provided along with the machine. Weight of the machine 18.5 kgs maximum. Make- Eibenstok, Bosch, KPT with all accessories suitable for the Railway Signalling and along with carrying case. "
2
112848
225696.24
... More
"Signal maintainer's tool bag with tools. As per Section IV technicalspecification of Tender document"
8
34102
272816
... More
Rechargeable LED Torch Cum Emergency Light with power bank. Make-TEJAS or SIMILAR.
18
3658
65844
... More
"Supply of UL/EN/FM/Vds/LPCB approved Microprocessor basedNetworkable Analog addresable and modular type of Fire Alarm Control panel withdisplay, in built changing facility and provision of GSM module suitable to send SMSto configured monbile numbers. The panel should be equipped with sufficient nos. ofloops and provision of expandability as per RDSO Specification 13 No.RDSO/SPN/217/2021 ver 3.0 of latest. The Control Panel shall be the centralprocessing unit of the system. receiving and analyzing signals from Probe typebimaetallic heat detectors, UV & IR flame detectors, Heat and Smoke multi sensors,LHS Interface and Manual call Points, providing audiable and visual information to theuser. The panel shall have provision of connectivity of TCP-IP suitable forprogramming and remote monitoring. The panel shall have dedicated RS- 232 serialport for direct PC or MODEM connection, for interfacing with existing Data Logger.optional remote printer. (As per RDSO Specification No. RDSO/SPN/217/2021 ver 3.0or latest)"
1
67732
67732.01
... More
"Supply of Analogue Addressable Multisensor Detector with multiplesensitivity 14 (adjustable at site) levels e.g. smoke, heat, rate of rise heat etc,programmable for timed automatic sensitivity selection with base, and otheraccessories as required.as per RDSO specification no. RDSO/SPN/217/2021 ver 3.0 orlatest"
150
3282
492388.5
... More
"Supply of Manual call points, addressable & resettable, with Inbuiltisolator or alternate arrangement. Shall comply to the specification No.RDSO/SPN/217/2021 ver 3.0 or latest."
5
4307
21538.75
... More
Supply of Analogue Type Linear Heat Sensing cable(LHS) as per the RDSO Specification RDSO/SPN/217/2021 ver 3.0 or latest.
-
-
16
... More
Supply of Interface module for Linear Heat Sensing cable(LHS) andcontrol panel along with one zone module as per the RDSO SpecificationRDSO/SPN/217/2021 ver 3.0 or latest.
5
85092
425462
... More
"Supply of Hooter cum Strobe complying to the specification No.RDSO/SPN/217/2021 Ver.3.0 or latest."
5
6466
32330.65
... More
"Switch Plate lubricant - Cenolube 100 or better NLGI 00 GRADE Blackcolored which should be non asphaltic Non bituminous blend of very heavy oils, inertthickeners and lubricatingsolids coupled with molybdenum disulfide and graphitewith no traces of chlorinated solvent such as 1,1,1 trichloroethane which areflammable and harmful to the environment. Should have a blend of select highviscosity index solvent refined severely hydro finished paraffin base oils andsynthetic base fluids. It should incorporate solid lubricants & organo molybdenumdisulphide to fill & lubricate micronized asperities to provide & form many films onthe contact surfaces to prevent metal-to metal contact. It shall be designed to behand applied providing a tough adherent Lubricant film with Tacky semi-dry 19 finishreducing contaminant adhesion. The grease Should Not form a difficult to removethick DRY film which requires scrapping & solvent cleaning of Switch Plate speciallybefore reapplication Thegrease should Not need Cleaning or scrapping beforeReapplication. The Grease should be formulated for tropical climates and should notcontain pour point depressants and should Not be too thin. The grease shall beResistant to water wash off & dilution, water insoluble, non-melt and chemicallyresistant to exposed environment. The grease shall be formulated with ExtremePressure additives, rust and corrosion inhibitors, anti-wear additives to protectexternal surfaces against the harsh elements in severe climates, thus reducing rustbinding andadhesive wear on switch plates Four Ball Weld LOAD (ASTMD2596)> 600 Kg, Copper corrosion 24 hrs @ 100c (ASTM D 4048) 1a -2e packing Size 20 kg/25kg Drum."
100
4214
421400
... More
Supply of Supply of Modem(E1-RS232) compatible withexisting UFSBI system to work 20 on backup media OFC (viaunframed E1-2 mbps fromSTM interface). workingvoltage: 24 VDC(+/- 20%),&operating temperature:-10deg. C to +70 deg. C. themodem shall be compatiblewith UFSBI/existing blocksystem as per RDSO Spec IRSS:105/2012 or latest.
2
28279
56558.18
... More
Supply of Single Phase, Capacity 200 Amps, Heavy Duty Portable Inverter Welding Machine
2
15218
30436.92
... More
"MS Cover for IRS Point Machine 143mm ( As Per RDSO Drg. No. RDSO/S 10866) "
-
-
22
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%