Military Engineer Services Tender

M & L for providing dry river sand as in cushioning to under ground cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. Note: For measurement purpose punned thickness of sand will be considered.

Supply and Lay factory made un reinforced precast concrete cable cover LV Type II with flat size 250mm X 180mm X 40mm

Supply & lay as in replacement in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 35 Sqmm 3.5 core complete all as specified and directed.

M & L for earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15 mm as earthing lead burried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level connected to and including copper strips of size 20 x 3 mm by means of bolts,nuts, check nuts and washer etc made of galvanised iron and connected to earthing test point all as shown in electrical plate No.3 of SSR Part I 2009 and as specified or indicated and testing on completion including excavation/earth work in any type of strata, charcoal, rock salt, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM weight not less than 4 Kg/Sqm), cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note: Earth strip and GI protection pipe up to length 7.5m shall deemed to be included in rate of above item.

S & F 12.5 M high mast shaft in two sections suitable for 50 m/sec wind speed (as per IS 875), with raising lowering system comprising, head frame, luminaries carriage suitable to install 4 nos. LED luminaries in Asymmetrical arrangement, with Counter weight for LED Flood Light balancing, Double drum winch, 5 mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. Data- 12.50 Mt High Mast , Top-100 mm ,Bottom-360 mm , Section Thickness -3/3 mm/mm (Bottom/Top) , PCD(pitch circle dia)-445 MM (4 Hole) including foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. Size: M24 x 6 nos, 850 MM long, Anchore & Template Plate PCD(pitch circle dia)- 445mm (6 Hole) and fixing of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9 A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 16 & 2.5 sq. mm terminals.Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 1.5 metre depth with all materials and labour. Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs and all labour including dismantling existing poles, light fittings and foundation etc.

S & F LED Flood Light 160 W for High Mast. Make: Havells, Philips, Bajaj, Wipro, CG