Central Public Works Department

SLNo Description Qty Unit Rate I/c Cost Index Amount 1 EARTH WORK 1.1 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 10000.00 sqm 5.96 59600.00 2 CONCRETE WORK 2.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2.1.1 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size). 3.36 cum 6227.28 20924.00 3 REINFORCED CEMENT CONCRETE 3.1 Providing and fixing sheet covering over expansion joints with iron screws as per design. 3.1.1 Fibre cement board 6 mm thick as per IS: 14862. 3.1.1.1 200mm wide 20.00 metre 238.25 4765.00 4 MARBLE AND GRANITE WORK 4.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 4.1.1 Granite Stone of approved shade 2.40 sqm 2998.79 7197.00 CENTRAL PUBLIC WORKS DEPARTMENT Name of work NIT No. 24 / AE / RCSD / RAJKOT / 2019-20 External Painting , Internal Painting and Miscellaneous Work For A-1 type School Building ,Kendriya Vidhyalaya, Jetpur,Village Pedhla, Jetpur. 5 WOOD AND P.V.C. WORK 5.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 5.1.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 5.04 sqm 1696.42 8550.00 5.2 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 5.2.1 250x16 mm 12.00 each 216.00 2592.00 5.3 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5.3.1 125 mm 16.00 each 55.61 890.00 5.4 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 5.4.1 Twin rubber stopper 50.00 each 57.84 2892.00 6 STEEL WORK 6.1 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 6.1.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete 60.00 kg 87.30 5238.00 6.2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 10.00 kg 536.45 5365.00 7 FINISHING 7.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 7.1.1 Two or more coats on new work 12.00 sqm 113.55 1363.00 8 REPAIRS TO BUILDINGS 8.1 Renewing glass p