Tenders of Offizielle Bezeichnung

Contract notice – General guideline, standard regulation Open procedure (services) Architectural service in accordance with Section 33 FF Hoai 2021 for conversion and renovation measures Building A, Europaplatz, 61169 Friedberg Conversion and renovation of 3 floors (ground floor, 1st floor and 7th floor); Improvement of fire protection and conversion of the existing elevator system, as well as optional services (additional elevator system inside or outside, additional space for emergency power supply and creation of a second escape route). Architectural service in accordance with Section 33 FF Hoai 2021 for conversion and renovation measures for increasing fire protection and improving accessibility. The aim is to create a condition that is approved under building regulations.

Contract notice - general guideline, standard regulation Open procedure (services) Provision of engineering services via geotechnical investigations with geotechnical reports for the replacement building of the Sandrosenschule, 35519 Rockenberg The replacement building of the Sandrosenschule is required due to a lack of expansion capacity at the two previous locations in Rockenberg and Oppershofen. For this reason, a new school building is to be built at a new location in the Rockenberg/Wetteraukreis district. The plot of land intended for the construction of the elementary school is in the area of the "Burgweg" development plan. The available plot of land is 17,022 m². After determining the space requirements, the space program was drawn up. A elementary school with a gym and outdoor facilities is to be planned. The new school building has 8 classrooms, 4 group rooms, 1 specialist room with an adjoining room, a library and the rooms required for the all-day area. A cafeteria including a cafeteria kitchen with the corresponding ancillary rooms (storage, staff rooms, etc.) is to be planned. In addition to the school area, an administration area with the corresponding office rooms, the teacher's room and the necessary ancillary rooms will also be implemented. The access and technical areas as well as storage rooms must also be taken into account. A gym with a play area of approx. 200 m² plus an equipment room and the necessary ancillary rooms is also to be planned. Estimated costs for the entire construction project: Kg 300 net €4,777,411.76 (replacement building and gymnasium) Kg 400 net €3,184,941.18 (replacement building and gymnasium) Kg 500 net €672,268.91 Construction or execution time: Service provision: Immediately after the order is placed. 11/2024 Start of construction expected 04/2025 or 01/2026 Commissioning expected 1st quarter 2028

Contract notice – Sector Directive, standard arrangements negotiated procedure with prior publication of a call for competition/negotiated procedure (supplies) Supply of minibuses for the transport of people with reduced mobility (kko-prm) Supply of up to 11 minibuses for the transport of people with reduced mobility (kko-prm) within a framework agreement for 36 months. Planned fixed call-off quantity: call-off ... Additional delivery of up to 11 minibuses for the transport of people with reduced mobility (kko-prm) within a framework agreement for 36 months. Planned fixed call-off quantity: Call-off year 2024: 3 Kko-prm Optional calculated call-off quantity: Call-off year 2025: 4 Kko-prm (delivery in 2026) Call-off year 2026: 4 Kko-prm (delivery in 2027) The minimum requirements can be found in the information documents. The estimated call-off quantities were defined on the basis of the current planning status and can still be adjusted. These are approximate quantities. The use is due to the economic situation.

Contract notice – general guideline, standard regulation, open procedure (construction work) construction site setup – Friedrich-Ebert-Gymnasium, Mühlheim The subject of the tender is construction fencing work, construction containers, protective measures and preparation of the construction site in the outdoor area of the new building project.

Contract notice – general guideline, special regulation open procedure (services) Petz 2.0 – perspective part-time training; qualification measure In principle, every trainee can complete their training part-time. They must be ready for training and have a certain proximity to the labor market. In addition, participants should have a language level of B2. The target group of the measure are disadvantaged or low-skilled people who receive benefits under SGB II, AsylBLG or SGB VIII and who are resident in the Hochtaunus district. Participation is also possible for people who are in possession of a residence permit as part of the asylum procedure. The measure serves to prepare for starting part-time training. In the best case, placement in a part-time training relationship takes place. The aim of the measure is initially to carry out basic development work. A realistic labor market orientation must be carried out with the participants. In terms of content, the measure must also be geared towards stabilizing the individual life situation of the participants. In particular for people with health restrictions and disabilities, health issues must be taken into account within the measure if necessary, as these often represent a central hurdle to integration. If a lack of childcare represents an obstacle to placement, the participants must be supported in finding a childcare place for their children. The basic structure of the measure is divided into two separate parts, which differ in terms of the number of places and the content. Part 1 of the measure starts on February 3, 2025 and ends on July 31, 2025. A course of 6 months must be held within this time. An extension of the first part of the measure is not possible. 10 places must be created for Part 1. Core content: Development of a professional perspective; individual coaching; support for people with care responsibilities; Support for people with disabilities; group events; remedial classes; project work; application training; child supervision; outreach mobile coaching; internship and job placement. Part 2 of the measure starts on August 1, 2025 and ends on January 30, 2026. A course of 6 months must be held within this time. Part 2 of the measure is aimed at participants who have taken up a part-time training relationship subject to social insurance contributions, a training relationship or an employment relationship subject to social insurance contributions. 6 places are to be created for Part 2 of the measure. Core content: follow-up care through digital coaching; outreach mobile coaching.

Contract notice – General guideline, standard regulation Open procedure (construction work) Gedern-fwgh: Flat roof sealing Flat roof sealing work at Neunau of the fire station in Gedern, in Erlesgrund

Contract notice – general guideline, standard regulation Open procedure (construction work) Window and glazing work in accordance with DIN The Eschborn magistrate intends to build a new extension with a 50 m swimming pool for the Wiesenbad in Eschborn. The city council approved the plans for the additional swimming pool presented by the magistrate in September 2018 by a majority. Eight 50-meter-long lanes will be built, as well as a separate entrance hall for the new extension. The swimming pool will have a flexible lifting floor. In addition, the swimming pool will be equipped with sliding doors that can be opened towards the outdoor pool in summer. The costs for this measure amount to around €15.7 million gross. Access to the site is via the existing access routes from the main road. The work will take place while the swimming pool is in operation; Window construction / glazing work Aluminum windows 1,000 pieces Technical processing of window constructions; 125,000 meters Pre-wall mounting frame system for window installation; 76,000 pieces 90° corner formations; 3,000 pieces Aluminum windows approx. 835 x 2600 mm, north view; 5,000 pieces Aluminum windows approx. 760 x 2600 mm, north view; 10,000 pieces Aluminum windows approx. 555 x 2600 mm, north view; 1,000 pieces Aluminum windows as a 2-wing element approx. 1875 x 1850 mm, south view; 125,000 pieces Sealing; 115,000 pieces Connecting profile; 15,000 M aluminum window sill; 38,000 pcs side window sill finishes; external doors in aluminum; 1,000 pcs technical processing of door structures; 32,000 M pre-wall mounting frame system for door assembly; 8,000 pcs 90° corner formations; 6,000 M base insulation element for door assembly; 1,000 pcs At/ 1-leaf/ Na/ fully glazed / 1,385 X 2,925 M / Dd; 1,000 pcs At/ internal pressure rod; 2,000 pcs At/ 1-leaf/ Na/ full-surface filling / 1,385 X 2,925 M / Kd; 1,000 pcs At/ internal pressure rod; 1,000 pieces At/ 2-wing/ fully glazed / 1.51 x 2.925 m / Kd; 32,000 m sealing - side and lintel; 6,000 m building sealing - floor-to-ceiling elements; 31,000 m connecting profile; facade; 1,000 pieces technical processing and static proof of post and beam constructions; 1,000 pieces Prk / axis A/ 3-4/ Eg-og - east view; 1,000 pieces Prk / axis Mo/ 6/ Eg-og - north view; 1,000 pieces aluminum door element 1-wing with zero threshold - north view - position as per door list Te-03.4; 1,000 pieces fittings for the aforementioned door; 1,000 pieces preparation of the static calculation for the entrance case; 1,000 pieces entrance case - supporting structure; 1,000 pcs Prk / entrance case - outside, north view; 1,000 pcs Prk / entrance case - inside, north view; 1,000 pcs Automatic linear sliding door for escape and rescue routes, outside door - vestibule case - north view; 2,000 pcs Protective wings to secure the shear, retraction and; 1,000 pcs Emergency switch with lighting to switch off the; 1,000 pcs Automatic hook bolt lock with manual; 1,000 pcs End position sensor with reed switch certified according to Vds; 1,000 pcs Continuous floor guide, made of aluminum, anodized E6 C-0; 1,000 pcs Automatic linear sliding door for escape and rescue routes - inside; 2,000 pcs Protective wings for security; 1,000 pcs Prk / axis Nm / Eg, south view; 1,000 pcs Aluminum door element 2-wing with zero threshold - south view; 1,000 pieces fittings for the aforementioned door; 2,000 pieces Prk / axis Nm / Og - connecting corridor; 1,000 pieces Prk / axis Bm / 1 / Eg-og - south view; 2,000 pieces aluminum door element 2-leaf with zero threshold - south view; 2,000 pieces fittings for the aforementioned door; 4,000 pieces At / inside pressure rod; 8,000 pieces aluminum folding sliding elements, thermally insulated, south view; 1,000 pieces aluminum folding sliding elements, thermally insulated, south view; 1,000 pieces Prk / axis M / 1-2 / Eg-og - west view; 5,000 M corner connection Prk / 90 ° outside corner; 15,000 M aluminum window sill complete with finishes, sealing profile; 6,000 pieces finishes; 95,000 M building waterproofing - floor-to-ceiling elements; 1,000 pcs technical processing of aluminum interior elements; 1,000 pcs aluminum windows approx. 5500 x 2500 mm room E-03; 1,000 pcs aluminum windows approx. 3945 x 2500 mm room E-09; 1,000 pcs aluminum windows/U-shape with 90° corners/approx. 680/2330/680 x 1600 mm room E-23; 1,000 pcs aluminum windows approx. 6340 x 1830 / 1530 mm room E-08; 1,000 pcs aluminum windows approx. 4285 x 1830 mm room E-08; 10,000 M edge part as connection or end profile, aluminum thickness; 10,000 m edge part as connection or end profile, aluminum thickness; 10,000 m edge part as connection or end profile, aluminum thickness; 50,000 m² protection facades / hardboard / 6 mm;

Contract notice – General guideline, standard rule Open procedure (construction work) Ewb_new extension 50m swimming pool Wiesenbad Eschborn; Ewb_arc_37_ventilated facade The Eschborn magistrate intends to build a new extension with a 50 m swimming pool for the Wiesenbad in Eschborn. The city council approved the plans for the additional swimming pool presented by the magistrate in September 2018 by a majority. Eight 50-meter-long lanes will be built as well as a separate entrance hall for the new extension. The swimming pool will have a flexible lifting floor. In addition, the swimming pool will be equipped with sliding doors which can be opened towards the outdoor pool in summer. The cost of this measure is around €15.7 million gross. Access to the site is via the existing access routes from the main road. The work is taking place while the swimming pool is in operation; ; Ventilated facade; 1.00 Psch Construction site setup; 1.00 St Preparation of the static calculation of the substructure; 1.00 St Design of the permanent scaffold anchors -- axis A; 5.00 Stk Dowel pull-out test / facade / reinforced concrete walls; 5.00 Stk Dowel pull-out test / facade / reinforced concrete walls; 1.00 St Preparation of the static calculation of the substructure - ceiling undersides; 2.00 Stk Dowel pull-out test - ceiling undersides; 1.00 Psch Documentation; 1.00 Psch VHF / facade measurement; 1,340.00 M² VHF / aluminum substructure; 50.00 m² Vhf / metal Uk small areas as lintel / roof edge in areas of the Prk here: south and west facade; 1.00 Psch surcharge for the additional work on the substructure; 70.00 M Vhf / outside corners 90°; 55.00 M Vhf / facade inside corners 90°; 285.00 M Vhf / lower facade finish; 80.00 M Vhf / finish free ceiling edge; 315.00 M Vhf / upper facade finish; 30.00 M side facade finish / on Prk; 125.00 M reveal profile windows / doors; 25.00 M lintel profile windows / doors; 70.00 M Vhf / wall covering / covering width approx. 250 mm; 2.00 pcs Vhf / wall covering / corners / 90°; 2.00 pieces Vhf / wall covering / ends; 130.00 M Vhf / wall covering / covering width approx. 650 mm; 8.00 pieces Vhf / wall covering / corners / 90°; 8.00 pieces Vhf / wall covering / ends; 120.00 M Vhf / wall covering / covering width approx. 750 mm; 4.00 pieces Vhf / wall covering / transitions corners; 43.00 M Vhf / wall covering / covering width approx. 800 mm; 1.00 pieces Vhf / wall covering / corners / 135°; 4.00 pieces Vhf / wall covering / ends; 50.00 pieces Vhf / permanent scaffold anchor - facade axis A; 2.00 pieces permanent stainless steel anchor point; 6.00 pieces permanent stainless steel anchor point; 55.00 m special stainless steel cable; 1.00 pcs stainless steel end fastening (fork head); 1.00 pcs force limiter / stainless steel; 6.00 pcs cable intermediate holder; 1.00 pcs system sign; 2.00 pcs self-belay set; 2.00 pcs shock-resistant safety helmet, tested according to EN 397:2012; 1.00 pcs storage cabinet; 1,340.00 m² VHF / thermal insulation / 160 mm; 950.00 m² VHF / facade panels / cream white; 90.00 m² VHF / facade panels / beige; 350.00 m² VHF / facade panels / anthracite; 18.00 pcs VHF / cut-outs; 36.00 pcs VHF / processing of window sills; 1.00 Psch Vhf / Existing ceiling undersides measured; 172.00 M² Vhf / Aluminum substructure / Wood; 15.00 M² Vhf / Aluminum substructure / Concrete; 172.00 M² Vhf / Thermal insulation / 60 mm; 15.00 M² Vhf / Thermal insulation / 160 mm; 187.00 M² Vhf / Facade sheet, Vhf; 65.00 M Vhf / Facade connection - to Prk; 27.00 M Vhf / Facade connection - to facade; 187.00 M² Vhf / Facade panels / Cream white; 15.00 St Vhf / Openings for penetrations;

Contract notice - General guideline, standard rule Open procedure (services) Procurement of an Internet uplink including provision of a DDoS mitigation solution The aim of this procurement measure is to procure an Internet uplink with a physical 2*10 Gbit/s bandwidth (port channel) with an estimated average utilization of at least 3,000 Mbit/s to maintain the redundant connection to the Internet for the state of Hesse. The contract is to follow on from the contract with Provider 2 which expires on February 28, 2025 (start: March 1, 2025). In addition, a service from the provider for attack detection and defense mechanisms, in particular for defense against "distributed denial of service" attacks, is to be used (protection of both IPv4 and IPv6 data streams against distributed denial of service attacks as well as DDoS protection at application level; hereinafter: "DDoS"). Use of this service is permanent and the costs depend on the data stream to be protected and the number of network segments and domains/IP addresses to be protected. With regard to the IP subnets to be protected for L3/L4 protection, a requirement for at least one /18 network is expected for IPv4 and a requirement for one /48 network (potentially two /48 networks) for IPv6 during the contract period. Ten subdomains/IP addresses or applications are expected to be required for L7 protection. The provider is also expected to provide consulting and support services, for example with regard to complex issues relating to the BGP protocol or the provision of IPv6 or the DDoS mitigation solution, which are directly related to the services described above. The aim is to conclude a framework agreement for the provision of an Internet uplink, in which the contractor provides an Internet connection for the state of Hesse at a fixed monthly price with a defined consumption volume, as well as for the use of a DDoS mitigation solution from the provider with a minimum term of 24 months and two automatic extensions of 12 months each (max. 48 months). The current provider 1 (plus.line) is excluded from this tendering process for reasons of reliability (requirement for two independent providers). This also applies to any subcontractors with regard to the DDoS mitigation services. The service must primarily be provided at the HZD location in Mainz. It may arise during the term of the contract that the service must be provided in the data center in Wiesbaden. If on-site services become necessary, the requirements regarding the regulations for access to the data center rooms in accordance with clauses 16 and 19 of the framework agreement apply to the contractor's employees. Technical requirements Internet uplink - Internet uplink of 2x 10 Gbit/s physical bandwidth. - The physical bandwidth of 20 Gbit/s must be fully available to the client for use in order to be able to transport peak loads (e.g. in the event of a failover) without any loss of quality. An average utilization during peak working hours of approx. 3,000 - 5,000 Mbit/s with an increasing trend can be expected. - The connection between the contractor's line termination and the Hzd connection router is via fiber optic (2x 10 Gbit/s single mode). - If the contractor has to bring their own connection technology into the HZD data center to provide the Internet uplink, the following conditions apply: - 19"-capable devices for installation in corresponding racks (without intermediate floors), if necessary, suitable installation rails must be supplied - All active devices must have redundant power supplies - All devices are operated in a cold aisle housing - Provision of 2x10 Gbit/s ports - LWL single-mode interfaces for plugging the patch cables to the HZD connection router - The house transfer point is determined by the HZD - The rack space is assigned by the HZD, access to the rack is not provided exclusively for the provider - The contractor provides a transfer network (IPv4/IPv6) for connecting the HZD connection routers - If necessary, it must be possible to transfer the Internet uplink from the Internet gateway in the Mainz data center to the Internet gateway in the To be relocated to the Wiesbaden data center. - The routing must not overlap with that of Provider 1, ideally up to a central exchange node, such as the Decix in Frankfurt. The current handover point of the Provider 1 line is in Wiesbaden. - If the contractor uses a subcontractor to provide the connection line (last mile), this must be named. The requirement of no overlap in the routing with that of Provider 1 also applies to the subcontractor. - The contractor guarantees that he will provide the offered and promised bandwidth for the entire term of the contract for the permanent use of Internet offers. Due to the client's usage profile, the full offered and promised bandwidth must be available at least on working days (Monday - Saturday) between 6:00 a.m. and 8:00 p.m. - It is expected that the contractor maintains a direct connection to one of the central exchange nodes such as Decix, Kleyrex or similar. - Both IPv4 and IPv6 traffic must be transported. The contractor guarantees that in addition to IPv4 traffic, it can also transport IPv6 traffic (dual stack) in the same quality and with the same range of functions. All other requirements can be found in the service description (file "Service description").

Contract notice - General guideline, standard regulation Open procedure (construction work) Electrical installation 70-00001-2880-22 "* Dates for implementation of the main work on the construction site: Start of work January 7th, 2025; End of work July 30th, 2025 * Description of the procurement: Approx. 19kWp PV system with inverter 1 Evu wall ... More"* Dates for implementation of the main work on the construction site: Start of work January 7th, 2025; End of work July 30th, 2025 * Description of the procurement: Approx. 19kWp PV system with inverter 1 Evu converter measurement 2 electrical distributors 1 data distributor 16 socket combinations 21 high bay spotlights on a luminaire support rail approx. 90m. N2xch 4x120/70mm² Approx. 65m N2xch 4x70/35mm² Approx. 10m N2xch 4x50/25mm² Approx. 1200m Nhmh-j 5x2.5mm² Approx. 3500m Nhmh-j 3x2.5mm² Approx. 1400m Duplex emergency lighting Single battery External lightning protection system Approx. 130m Cable tray Approx. 170m Parapet duct"