Military Engineer Services Tender

Supply, installation, testing and commissioning of reliable compact diesel engine driven DG Set of capacity 250 KVA out door type, 6 cylinder, liquid cool, Turbocharged after cooled, developing 310 BHP at 1500 RPM with 10% overload for one hour in 12 hours , electric start compression ignition, 4 stroke engine design to run continuously conforms to present latest CPCB IV + emmission norms with standard accessories and set of tools with adjustable spanners, screw driver, feeder gauge, cylinder head tocover, joint cylinder head to exhaust , 24 volt electric starting system complete with standard battery 24 volt 180 AH , dynamo , cut outs, ammeter and voltmeter , necessary wiring, pressure gauge, starter etc and heavy duty residential type exhaust silencer and vertical hot air duct boh logged with asbestos rope save oil trays , exhaust piping of standard length , standard MS fuel tank with level indicator and piping coupled with 250 KVA alternator, 3 phase, 415 volts, 0.8 power factor, single bearing Brushless alternator , self excited , self regulated , screen protected "H" class with static excitation system capable to deliver the rated system output at 415 volts, 3 phase , 0.8 pf , 50 HZ, 4 wire runnung at 1500 rpm, conforming to relevant IS with voltage regulation of +- 1 % of the rated voltage . both the engine and alternator fitted on a common fabricated heavy duty CRCA steel base frame with AVM pads including necessary PCC foundation as per OEM design The diesel engine comprise of the following : Note : The contractor shall provide test certificate and manuals with original purchase vouchers.

(a) Radiator with fan with standard fittings (b) Electric starter motor with soft starting system (c ) G3 as per ISO 8528 Part V class governor (d) Battery charging altertnator (e) Dry type air cleaner with service indicator (f) CRDI System (g) Lube oil & fuel filter (h) CRDI, EGR, DOC, SCR (j) First fill of lube oil and coolant (k) Internet of things Remote Monitoring system (l) Compact size with manual/automatic starting system (m) High water temperature (n) Low lube oil pressure (o) Emergency stop push button outside the enclosure (p) EGR (q) Cold start feature (r) Optimized EATS (Exhaust after Treatment System) is provided to control emmission & exhaust noise. ALTERNATOR : 250KVA Alternator, suitable for continuous operation rated 1500 RPM 415 Vol, 0.8 PF, 50 Hz, 3 phase in SPDP enclosure, self excited , self regulated Brush less, floor mounted. The alternator conforms to IS 4722, BS EN 60034- 1 & will be suitable for tropical condition. FIRE RETARDANT ACCOUSTIC ENCLOSURE : (a) The enclosure is of modular construction (b) Durable industrial locking systemto be provided for doors (c ) Ths sheet metal components are 9 tanks pre-treated and is polyester based powder coated (inside and out side) for long life. (d) Specially designed sound attenuators as provided to control sound at air entry & exit points inside the enclosure (e) In- build draw-in-type fuel tank of suitable capacity (f) The walls of enclosure are isulated with the fire retardant & noise absorbent foam.rock wool so as to comply with the noise level of 75 dB (A) at distance of 1 mtr, in open free field environment as per ISO 8528 part 10 specified by ministry of Environment & Forest. (g) Fluid drains for lube oil and fuel DG CONTROLAMF PANEL WITH GENSET CONTROLLER 250 KVA

Supply, installation, testing & commissioning AMF panel board Out- door type, IP- 65 suitable for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 3.0 mm and inner box thickness 2 mm, side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have frame work, bottom frame & 45 CM long four legs of size 50 x 50 x 6 mm Angle iron, including 600 Amp TPN aluminium busbar sleeved with heat shrink sleeve colmmour coated for 3 Phase, 4 wire electric supply system and control wiring with minimum size: 1.5 SQmm of copper cable complete comprising of following accessories all as specified and any other items required for smooth functioning of AMF Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge. (Note: AMF panel shall be mounted on PCC 1:2:4 type B-1 (with 20 mm graded stone aggregate) foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC foundation shall be deemed to be included in the unit rate quoted for the item.( Note:-All type Test Certificates and Design verification with switch gears as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.)