Military Engineer Services Tender

SCHEDULE "A" PART-IV ( INTERNAL WATER SUPPLY ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- V (ROAD/PATH) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- VIII (FENCING AND GATE ) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- IX (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- X (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XI (MISCELLANEOUS ITEMS) Note:- Srl Item No. 9.00 and this schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.

INTERNAL ELECTRIFICATION Supply and fixing Modular metal flush box with modular white cover plate with frame 8 module complete all as directed and specified.

S&F LED lamp 10 Watt complete all as directed and specified.

Supply and Fixing LED decorative light fitting 10W, 220 V, AC including LED light connecting up wih three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED security light fitting not less than1X35 watt with integral reflector made of alluminium alloy LM6 with LED dirver, lamp, surge protector and all accessories pre wired including connection with three core PVC insulated, sheathed copper conductor cable of suitable size complete with GI bracket 1.5 meter long bend to shape of dia 25/40 mm GI medium grade pipe with MS clamp all as specified and directed.

S&F TV socket single moudle, polycarbonate type complete with box all as specified & directed.

S&F wall mounted fan plastic body, single phase, 230 volts, 50 Hz of size 400 mm sweep, heavy duty type with flexible three core copper conductor cable of suitable size and 5 Amp plug all as specified and directed (for officer quarters)

M&L, testing,installation,commissiong of Kitchen Exhaust System (Chimney), Filter Less and Dry Heat Clean Technology / Matt Black Finish, Hassle free and dry Heat Auto Clean Technology, Thermostatic Touch Control Panel with 3 speed Gesture Motion, including Matt Black Finish, Black Metal Oil Collector, Motor with Copper Winding, Black Glass Clad Hood with LED Insignia, Front Panel with Black Glass, Energy Saving LED Light,Metal Blower+ Metal Housing,Designed Air Flow (max),: 1250Nm3/h, Noise level :58 dBA (max), 5 years Warranty, Size:90Cm complete all Civil work for fixing system,including fixing of Duct and complete Electrical wiring upto the socket point as required for system running complete all as specified and directed. (only for officer quarters)

Supply and fix concealed MCCB distribution box, double door, vertical type, TPN, 415 V, 6 way IP 43 suitable for MCCB of 100 Amps, 4 Pole, 25 KA as incomer and MCB SP/TP as outgoing complete with suitable busbar, neutral link, earth link complete all as specified and directed. Note:- (i) MCCB/ MCBs shall be measured and paid saperately. (ii) Blank space shall be covered with blank plates and cost for same shall be deemed to be included in the item quoted rate.

Supply and fix concealed MCCB distribution box, double door, vertical type, TPN, 415 V, 4 way IP 43 suitable for MCCB of 63 Amps, 4 Pole, 25 KA as incomer and MCB SP/TP as outgoing complete with suitable busbar, neutral link, earth link complete all as specified and directed. Note:- (i) MCCB/ MCBs shall be measured and paid saperately. (ii) Blank space shall be covered with blank plates and cost for same shall be deemed to be included in the item quoted rate.

Supply and fix MCCB 415 Volts, 4 Pole, 100 Amps, 50 Hz, 25 KA with thermal magnetic release type complete all as specified and directed.

Supply and fix MCCB 415 Volts, 4 Pole, 63 Amps, 50 Hz, 25 KA with thermal magnetic release type complete all as specified and directed.

Supply and fix MCB 230 Volts, 50 Hz, SPN, 16 Amps, 10 KA with "C" curve complete all as specified and directed.

Supply and fix MCB 230 Volts, 50 Hz, Single Pole, 63 Amps, 10 KA with "C" curve complete all as specified and directed.

M&L for Single Phase sub main wiring with 4 run of FRLSH type PVC insulated & unsheathed multistranded copper conductor cable of nominal cross sectional area 10 sqmm alongwith two run of FRLSH type PVC insulated & unsheathed multistranded copper conductor cable of nominal cross sectional area 10 sqmm as earth continuity conductor drawn through and including concealed PVC conduit non metalic type rigid medium grade complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 4 mm galvanised iron wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire 4mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 15mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed. (For Internal and External Electric Supply)

INTERNAL WATER SUPPLY S&F brass angle stop cock CP high pressure with capstan head long shank and cup fancy type, screwed down 15mm dia. bore complete all as specified and directed.

S&F pillar tap (Hot & cold) of 15mm bore, chromium plated, cast copper alloy with capstan head chromium plated screwed down high pressure fancy type, with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nuts long neck, screwd for iron pipe, complete all as specified and directed.

S&F 2-way bib taps of bore 15mm, chromium plated, cast copper alloy with cruth or butterfly handle, chromium plated with long shank and wall flange, cup, concealed type screwd down for iron pipe, complete all as specified and directed.

SEWAGE DISPOSAL M&L for RCC septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design mix in walls, base slab, baffle walls and roof slab including beams etc. with vent shaft, manhole openings with cover connection etc. for 150 users as per shown in drawing complete all as specified and directed.

M&L for RCC septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design mix in walls, base slab, baffle walls and roof slab including beams etc. with vent shaft, manhole openings with cover connection etc. for 50 users as per shown in drawing complete all as specified and directed.

M&L for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC of for 150 users of size 3.0m dia.X 4.5m effective depth as per shown in drawing complete all as specified and directed.

M&L for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC of for 50 users and size 2.4m dia.X 3.0m effective depth as per shown in drawing complete all as specified and directed.

EXTERNAL WATER SUPPLY Supply and laying 110mm outer dia., 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked and bearing specification as per IS-15801, PP-R pipes, SDR 11 (PN-10) with PP-R plain fittings laid in trenches/walls/cellings or laying in floors complete all as specified and directed.

Supply and laying 90mm outer dia., 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked and bearing specification as per IS-15801, PP-R pipes, SDR 11 (PN-10) with PP-R plain fittings laid in trenches/walls/cellings or laying in floors complete all as specified and directed.

Supply and laying 63mm outer dia., 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked and bearing specification as per IS-15801, PP-R pipes, SDR 11 (PN-10) with PP-R plain fittings laid in trenches/walls/cellings or laying in floors complete all as specified and directed.

Supply and laying 32mm outer dia., 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked and bearing specification as per IS-15801, PP-R pipes, SDR 11 (PN-10) with PP-R plain fittings laid in trenches/walls/cellings or laying in floors complete all as specified and directed.

Supply and fix of CI Sluice valve of 100 mm dia. with steel spindle bronze gate & seating rings conforming to IS 14846-2000 class 1.0 PN with ISI marked including jointing materials such as rubber insertion gaskets, suitable size of nuts, bolts, washers etc. complete all as specified and directed.

Supply and fix of CI Sluice valve of 80 mm dia. With steel spindle bronze gate & seating rings conforming to IS 14846-2000 class 1.0 PN with ISI marked including jointing materials such as rubber insertion gaskets, suitable size of nuts, bolts, washers etc. complete all as specified and directed.

Supply and fixing PP-R Gate Valves (Brass Insert) of 32 mm bore of outer dia. complete including all fittings, complete all as specified and directed.

Supply and fixing PP-R Gate Valves (Brass Insert) of 63 mm bore of outer dia. complete including all fittings, complete all as specified and directed.

Cutting or screwing existing steel/PPR tubing for alteration or additions suitable size for 100 mm dia. complete all as specified and directed

Cutting or screwing existing steel/PPR tubing for alteration or additions suitable size for 80 mm dia. complete all as specified and directed

Cutting or screwing existing steel/PPR tubing for alteration or additions suitable size for 50 mm dia. complete all as specified and directed

Construction of brick masonry valve pit of size 90cm x 90cm x 90cm (internal dimensions) with one brick thick wall in cement mortar 1:4 on 100 mm thick P.C.C. 1:4:8 type D2 (using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bedding and coping and 10mm thick cement plaster in CM (1:4) internally and externally up to 15cm below ground level providing valve pit 40 x 40 x 6mm angle iron frame all-round the fixed point by means of 4Nos holdfast 150mm long made out of flat iron 40 x 6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stoned aggregate) of size 230 x 200 x 100mm including provision of hinges welded with angle iron frame and MS cover 3mm thick, MS handle of suitable and size welded with MS cover and suitable locking arrangement including 65mm dia pad lock and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in any type of soil complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install, testing and commissioning of outdoor type transformer step down, copper wounded having primary side for HT Three Phase 11 KV & secondary for 3 phase 433 Volts, 4 wire, 50 Hz of capacity 250 KVA as per IS-1180-2014 Part-I or as per latest IS amendment Level-II with and including the following specification:- (i) No load voltage ratio-11KV/ 0.433 KV, (ii) Nos of phase-Three (iii) Type of cooling- ONAN (iv) Frequency- 50 Hz (v) Vector group-DYN 11 (vi) Two earthing terminals for body earthing and two additional for neutral (vii) Oil level gauge indicating oil level with minimum and maximum indication (viii) Lifting lugs rollers and MS terminal box on both HT and LT side (ix) Rating and terminal marking plates (x) Dehydrating breathing device which would not permit ingress of moisture, rain water and insects (xi) Drain-cum-sampling valve preferably steel with plug (xii) Off load tap changar (+5% to -10% in steps of 2.5% with 7 position) (xiii) Oil filling hole with cover (transformer wih conservator) (xiv) Connection-Delta/Star (xv) Temperature rise in oil-40 deg celcius (xvi) Temperature rise in windings- 45 deg Celcius (xvii) Material winding-Copper wound (xviii) High voltage/low voltage with cable termination box (xix) Service-Outoor type (xx) Neutral- Internally conneted with earthing lead and bush (xxi) First filling of new dehydrated transformer oil upto recommended level. Note:- Plinth foundation for the transformer as recommended by manufacture OEM or as directed by Engr-in-Charge is deemed to be include in quoted rate including necessary earth work.( For Airmen Md Accn Area)

Supply, install, testing and commissioning of outdoor type transformer step down, copper wounded having primary side for HT Three Phase 11 KV & secondary for 3 phase 433 Volts, 4 wire, 50 Hz of capacity 100 KVA as per IS-1180-2014 Part-I or as per latest IS amendment Level-II with and including the following specification:- (i) No load voltage ratio-11KV/ 0.433 KV, (ii) Nos of phase-Three (iii) Type of cooling- ONAN (iv) Frequency- 50 Hz (v) Vector group-DYN 11 (vi) Two earthing terminals for body earthing and two additional for neutral (vii) Oil level gauge indicating oil level with minimum and maximum indication (viii) Lifting lugs rollers and MS terminal box on both HT and LT side (ix) Rating and terminal marking plates (x) Dehydrating breathing device which would not permit ingress of moisture, rain water and insects (xi) Drain-cum-sampling valve preferably steel with plug (xii) Off load tap changar (+7.5% to -7.5% in steps of 2.5% with 7 position) (xiii) Oil filling hole with cover (transformer wih conservator) (xiv) Connection-Delta/Star (xv) Temperature rise in oil-40 deg celcius (xvi) Temperature rise in windings- 45 deg Celcius (xvii) Material winding-Copper wound (xviii) High voltage/low voltage with cable termination box (xix) Service-Outoor type (xx) Neutral- Internally conneted with earthing lead and bush (xxi) First filling of new dehydrated transformer oil upto recommended level. Note:- Plinth foundation for the transformer as recommended by manufacture OEM or as directed by Engr-in-Charge is deemed to be include in quoted rate including necessary earth work.( For Officer Md Accn Area)

Supply, install, testing and commissioning of LT outdoor Feeder Pillar Box AC 415 V, 50 Hz 3 Phase 4 wire, totally enclosed self supporting structure / cubicle, fully compartmentalized type, weather proof, protection IP 54 suitable for outdoor use double door type, with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet of minimum size ( 1.2x1.0 x 0.6) m with angle iron frame work and legs of ISA 50X50X5 mm, with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter, changeover switch and MCCBs with sloping canopy at top, double hinged doors at front with suitable locking arrangement including louvers at sides duly powder coated complete for accomodating & including following accessories:- (For Md Accn for Officers) INCOMER :- (a) Supply and fixing MCCB 4 pole 415 Volts with microprocessor controller of breaking capacity of 25 KA of 125 Amps with Fixed thermal and Fixed magnetic setting- 01 No BUSBAR :- (i) Aluminium bus bar 200 Amps, supported on non hygroscopic fibres and brass screws for mounting -04 Nos INDICATING DEVICES :- (a) Supply and fixing LED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (b) Supply and fixing Digital Ampere Meter of 0-125 A, 3 phase, class 1 with selector switch including CT having CTR 125/5 - 01 No (c) Supply & fixing Digital Voltmeter 0-500 Volts, 3 phase, class 1 with selector switch- 01 No

Serial Item No. 49.00 (Contd....) Outgoing :- (a) Supply and fixing MCCB 3 pole 415 Volts with of breaking capacity of 16 KA of 63 Amps with Fixed thermal and Fixed magnetic setting- 03 No (02 Outgoing for two Building+01 Spare) (b) Supply and fixing MCCB 3 pole 415 Volts with of breaking capacity of 16 KA of 32 Amps with Fixed thermal and Fixed magnetic setting- 01 No for street light (c) Supply and fixing Astronomical Timer switch along with contactor 3P 32Amps, 415V, 50Hz for street light controlling

Supply, install, testing and commissioning of LT outdoor Feeder Pillar Box AC 415 V, 50 Hz 3 Phase 4 wire, totally enclosed self supporting structure / cubicle, fully compartmentalized type, weather proof, protection IP 54 suitable for outdoor use double door type, with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet of minimum size ( 1.4x1.2 x 0.6) m with angle iron frame work and legs of ISA 50X50X5 mm, with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter, changeover switch and MCCBs with sloping canopy at top, double hinged doors at front with suitable locking arrangement including louvers at sides duly powder coated complete for accomodating & including following accessories:- (For Md Accn For Airmen Main LT Panel) INCOMER :- (a) Supply and fixing MCCB 4 pole 415 Volts with mocroprocessor controller of breaking capacity of 25 KA of 320 Amps with Fixed thermal and Fixed magnetic setting- 01 No BUSBAR :- (i) Aluminium bus bar 400 Amps, supported on non hygroscopic fibres and brass screws for mounting -04 Nos INDICATING DEVICES :- (a) Supply and fixing LED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (b ) Supply and fixing Digital Ampere Meter of 0-300 A, 3 phase, class 1 with selector switch including CT having CTR 320/5 - 01 No (c) Supply & fixing Digital Voltmeter 0-500 Volts, 3 phase, class 1 with selector switch- 01 No

Serial Item No. 51.00 (Contd....) Outgoing :- (a) Supply and fixing MCCB 3 pole 415 Volts with of breaking capacity of 16 KA of 125 Amps with Fixed thermal and Fixed magnetic setting- 03 No (For LT Sub Panel 1 And 2 Outgoing + 01 spare) (b) Supply and fixing MCCB 3 pole 415 Volts with of breaking capacity of 16 KA of 40 Amps with Fixed thermal and Fixed magnetic setting- 02 No (For Building 9 Outgoing + 01 spare) (c) Supply and fixing MCCB 3 pole 415 Volts with of breaking capacity of 16 KA of 32 Amps with Fixed thermal and Fixed magnetic setting- 01 No

Supply, install, testing and commissioning of LT outdoor Feeder Pillar Box AC 415 V, 50 Hz 3 Phase 4 wire, totally enclosed self supporting structure / cubicle, fully compartmentalized type, weather proof, protection IP 54 suitable for outdoor use double door type, with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet of minimum size ( 1.2x1.0 x 0.6) m with angle iron frame work and legs of ISA 50X50X5 mm, with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter, changeover switch and MCCBs with sloping canopy at top, double hinged doors at front with suitable locking arrangement including louvers at sides duly powder coated complete for accomodating & including following accessories:- (Sub LT Panel For Md Accn For Airmen ) INCOMER :- (a) Supply and fixing MCCB 4 pole 415 Volts with mocroprocessor controller of breaking capacity of 25 KA of 125 Amps with Fixed thermal and Fixed magnetic setting- 01 No BUSBAR :- (i) Aluminium bus bar 200 Amps, supported on non hygroscopic fibres and brass screws for mounting -04 Nos INDICATING DEVICES :- (a) Supply and fixing LED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (b ) Supply and fixing Digital Ampere Meter of 0-150 A, 3 phase, class 1 with selector switch including CT having CTR 125/5 - 01 No (c) Supply & fixing Digital Voltmeter 0-500 Volts, 3 phase, class 1 with selector switch- 01 No

Serial Item No. 53.00 (Contd....) Outgoing :- (a) Supply and fixing MCCB 3 pole 415 Volts with of breaking capacity of 16 KA of 40 Amps with Fixed thermal and Fixed magnetic setting- 05 No (For Building 1,2,3,4 Outgoing + 01 spare) & (For Building No 5,6,7,8 and 01 spare)

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 32mm x 6mm galvanised iron strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI strip 32mm x 6mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.

M&L for earthing complete with copper plate 600mm x 600mm x 3mm thick electrode and 20mm x 3mm copper strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to copper strip 20 x 3mm as earth lead by means of tinned copper/ brass bolts, nuts, check nuts and washers (including brazing) connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.

Supply and fix LED street light 45 W with minimum lumen of 4500Lm, PF 0.95 new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole including bracket for street light fitting of any size made out of GI pipe light grade 40 mm dia, 1.5 mtr length bend to required size and shape including provisiob of clamps and fitting in position and including two coat of aluminum paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix cable junction boxes IP 66 "halogen free and weather proof" for outdoor installation (with metric knockouts for cable entry) of minimum size 225 x 295 x 125 mm for 16/25 sq.mm fixed to pole /wall with suitable FI clamp 20X3 mm nuts , bolts and washers including provision of 01 No miniature circuit breaker (MCBs) single pole , 240 volts 10 kA, 10 Amps and including minium 200 Amps aluminium busbar (04 Nos) with nuts, bolts & washers, complete all as specified and as directed.

Supply and fixing PVC insulated and PVC round sheathed, copper conductor industrial cable 1.5 sqmm, three core of copper conductor for connection of street light fittings on pole / wall / pillar from junction box including termination clip etc complete in all respect including through GI tubing of size 20mm dia or all as specified or directed.

Supply, installation and testing of single phase, 2 wire Prepayment i.e Prepaid ( Power supply disconnection is automaic for non payment customer ) , IS 16444 Energy Meter of rating 10-60A, 440 volt, 50 Hz accuracy class 1.0 with in built electronic touch/push button type keypad, separate display unit compatible with existing metering system installed at AF Stn Dinjan with IP54 Protection , with following specification. (i) Voltage rating :- 220V(+30%,-40%) (L-L) and 240 Volt (L-N) (ii) Current Rating :- 10Amp-max 60Amp (iii) Class of Accuracy :- Class 1.0 (iv) Rated Frequency :- 50HZ +/-5% (v) Maximum continuos current :- 60 amps

Supply, installation and testing of Three phase, 4 wire Prepayment i.e Prepaid ( Power supply disconnection is automaic for non payment customer ) , IS 16444 Energy Meter of rating 10-100A, 440 volt, 50 Hz accuracy class 1.0 with in built electronic touch/push button type keypad, separate display unit compatible with existing metering system installed at AF Stn Dinjan with IP54 Protection , with following specification. (i) Voltage rating :- 440V(+30%,-40%) (L-L) and 240 Volt (L-N) (ii) Current Rating :- 10Amp-max 100Amp (iii) Class of Accuracy :- Class 1.0 (iv) Rated Frequency :- 50HZ +/-5% (v) Maximum continuos current :- 100 amps

Supply, installation, testing & commissioning of Single phase Hot pressed SMC Meter box of minimum size 250X250X160mm with viewing glass,concealed hinge and earth bolt plugged complete all as specified and directed

Supply, installation, testing & commissioning of Three phase Hot pressed SMC Meter box of minimum size 350X270X200mm with viewing glass,concealed hinge and earth bolt plugged complete all as specified and directed.

Supply and fixing of all-in-one solar street light of 30watt including monocrystaline solar panel of 60Wp, new age lithium ferro phospate battary of capacity 12.8V/3.6Ah ,silicon encapsulated high effiicency MPPT charge controler, aluminium housing for battary box and mounting bracket mounted on 5mtr GI pole of medium grade complete including errection and foundation work all as specified and directed.