Indian Oil Corporation Limited Tender

Applying priming coat with ready mixed primer of approved brand and manufacturer at all heights over steel surfaces like structures, columns, pipes, vessels, tanks etc. as per manufacturers specifications and directions of the Engineering-in- Charge; all complete including cleaning the surface using emery papers/ Power tool cleaning such as ST-2 or ST-3 as per requirement, including all material, consumables, tools, tackles, labour etc but excluding Scaffolding. Note- No. of coats mentioned in the SOR items are only indicative and contractor has to achieve rquired DFT by applying more coats (if required) within the relevant SOR item rates.

Self priming HB coating primer to achive a minimum DFT of 100- 125 microns (1 or more coat of 100-125 micron)

Supplying and applying various epoxy and other protective intermediate / finish paints of approved brand and manufacturer at all heights over prepared/primed surface for steel structures, pipelines, tanks, vessels, equipments, concrete floors etc. as per manufacturers specification and directions of Engineer-in-charge all complete including all materials, labours, tools-tackles and consumables etc but excluding Scaffolding. Note- No. of coats mentioned in the SOR items are only indicative and contractor has to achieve required DFT by applying more coats (if required) within the relevant SOR item rates.

Two pack Acrylic Poly-urethane (PU) to achive a minimum DFT of 40-50 microns (one or more coat of 40-50 micron).

HR aluminium / Silicone Aluminium paint 120 - 200 degree C to achive a minimum DFT of 40 microns (Twoor more coats of 20 micron each).

HR aluminium / Silicone Aluminium paint above 200 degree C to achive a minimum DFT of 40 microns (Two or more coats of 20 micron each).

STEEL SCAFFLODING (MATERIALS IN CONTRACTOR'S SCOPE) The job includes supply of all scaffolding materials, transportation to work site, erection of scaffolding at site as per ISMS (IndianOil Safety Management System) Standard-1007 on Scaffold Safety with safest and reliable design. Scaffolding design should consider the worst load combination expected during its service period. The supporting structure should be sufficient in strength, stability, and rigidity; The safety of personnel associated with the erection, alteration, and dismantling of the scaffold; the safety of persons using the scaffold; and the safety of persons in the vicinity of the scaffold to be considered mandatorily. Standard Tags for "Fit for Use" in Green Color and "Not Fit for Use" in Red Color to be fitted on scaffolding as per ISMS Standard-1007. Note: 1. For measurement in SQM: 2 (length + width) X height area covered by the scaffolding is to be taken. 2. Scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs.

Upto 6 M

Intermediate plate form

PF, EDLI and ESI charges on employer contribution limited to sum of (1.87% of total executed value under Civil SOR-2023 items i.e., It.No.10 to 800) and (1.99% of total executed value under Mech. SOR-2024 items i.e., It.No.90 to 110). This is an Reimburseable Amount, which shall be certified based on submission of necessary documentary proof.