Military Engineer Services Tender

Lumpsum price worked out by the bidder/ tenderer for INTERNAL WATER SUPPLY as listed in Schedule 'A' Part-III.

Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-IV.

Lumpsum price worked out by the bidder/ tenderer for HOT WATER SUPPLY & COOLING APPLIANCES as listed in Schedule 'A' Part-V.

Lumpsum price work ROAD, PATH & CULVERT as listed in Schedule 'A' Part-VI.

Lumpsum price worked out by the bidder/ tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-VII.

Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-VIII.

Lumpsum price worked out by the bidder/ tenderer for SEWAGE DISPOSAL as listed in Schedule 'A' Part-IX.

Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-X.

Lumpsum price worked out by the bidder/ tenderer for COMPOUND WALL, FENCING & GATE as listed in Schedule 'A' Part-XI.

Lumpsum price worked out by the bidder/ tenderer for DEMOLITION/DISMANTLING as listed in Schedule 'A' Part-XII.

Sch 'A' Sec-XIII (Miscellaneous Items) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any , transportation ,taxes,etc. for area filling / area development including raising of original ground level by approved earth and including spreading in layers not exc 30cm thick each layer ,watering , compaction with 8 tonne to 12 tonne power roller and finished. Notes:- (i) Earth required for the item, shall be supplied by contractor, from out side MOD land as approved by GE, of any lead, at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor. (iii) With reference to clause 3.6 of MES part-II on serial page No-21 it is clarified that measurement of the above item shall be of finished embankment of filled earth after consolidation /compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk. (iv) Total quantity /partial quantity of earth may not be available in Likabali Area. The contractor has to bring the earth from out side area and it is advised to quote the rate considering availability of soil and its lead involved.

Point wiring with 4 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit and conduit accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one16 Amps socket outlet on independent board.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 1.5 KW capacity 15 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece, with grouting bolts and nuts, etc. all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece, with grouting bolts and nuts, etc. all as specified and as directed.

Supply, installation, commissioning of Water cooler fully stainless steel body, electric driven single phase having approx storage and nominal cooling capacity of 40 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in kerb stone of any size with plain fare faces, smooth finish, including chamfering, weathering, throating and set in CM 1:4, including necessary formwork and excavation & earthwork for embedding kerb stone at a depth as directed & tempering around kerb stone and removal of surplus soil to a distance not exceeding 50m & depositing where directed complete all as specified & directed.

Material, labour and applying road marking paint(2.5mm thick), retro-reflective type of specified shade / colour using hot thermoplastic material by automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cleaning the road surface and remove all dirt, seals, oil, grease and foreign material etc. complete all as per manufacturer's instructions and as per direction.complete all as specified and directed.

M&L for machine pressed precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerb stone of size 30cm x 30cm x 10cm with plain fare faces, smooth finish with colour pigment, finished at top bullnosed shape, and jointed in CM 1:6 including necessary formwork and excavation & earthwork for embedding kerb stone at a depth as directed & tempering around kerb stone and removal of surplus soil to a distance not exceeding 50m & depositing where directed complete all as specified & directed.

Material & Labour Plain Cement Concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under and haunching against the sides of pipes after they are laid and tested for 600mm bore pipe complete all as specified and directed

S & F 80mm bore sluice valve (operation-cap) both side flanged, ISI marked (IS No 14846-2000 class PN-1.6) having cast iron body, cast iron hand wheel, brass spindle, cheek nuts and sliding gate and body width including testing against leakage and supply of nuts & bolts complete all as specified and as directed.

M&L for construction of brick masonry valve pit of size 1000 X 1000 X 1000 mm (internal dimension) one brick thick wall in CM 1:4 on 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made of 3mm thick MS sheet/plate, welded including provision of hinges, handle and locking arrangement including 40 X 40 X 6mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil complete all as specified & directed.

Cutting of existing DI/CI pipes of size upto 200 mm bore in posn for taking out br connection with Tee of size 90 mm x 90 mm x 50 mm and connected to pipe including materils,necessary excavation in any types of soil complete all as specified and as directed.

Supply install, testing and commissioning of outdoor, CPRI approved LT panel board double door mounted on pedestal factory made, totally enclosed, dust & vermin proof (protection class IP 43), (front & rear opening) with proper locking arrangement made out of MS angle iron frame size of 50mmx50mmx6mm and CRCA sheet of 3.15 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system, provided with danger notice plate with skull & bone sign, PVC gasket and sealed and shall be complete with Alluminium busbar of 400Amps rating with suitable size of PVC insulated copper conductor for internal wiring, thimbles glands complete all as specified and directed with all necessary accessories. The cost of the PCC pedestal is deemed to be included in the quoted rate of above item. The panel will comprise of the following :- (At tapping point for single Offrs Accn) (a) MCCB 200 A, 4P, 26 KA, 430 V- 01 Nos. (b) Spare compartment -01 Nos (c) Indicator lamp (RYB) - 01 Set (d) Digital type Voltmeter with selector switch -01 Set (e) Digital type Amperemeter with selector switch and suitable size of CTs -01 Set

Supply install, testing and commissioning of outdoor, CPRI approved LT panel board double door mounted on pedestal factory made, totally enclosed, dust & vermin proof (protection class IP 43), (front & rear opening) with proper locking arrangement made out of MS angle iron frame size of 50mmx50mmx6mm and CRCA sheet of 3.15 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system, provided with danger notice plate with skull & bone sign, PVC gasket and sealed and shall be complete with Alluminium busbar of 400Amps rating with suitable size of PVC insulated copper conductor for internal wiring, thimbles glands complete all as specified and directed with all necessary accessories. The cost of the PCC pedestal is deemed to be included in the quoted rate of above item. The panel will comprise of the following :- (At tapping point for single JCOs accn) (a) MCCB 160 A, 4P ,26 KA ,430 V- 01 Nos. (I/C) (b) Spare compartment -01 Nos (c) Indicator lamp (RYB) - 01 Set (d) Digital type Voltmeter with selector switch -01 Set (e) Digital type Amperemeter with selector switch and suitable size of CTs -01 Set

Supply install, testing and commissioning of outdoor, CPRI approved LT panel board double door mounted on pedestal factory made, totally enclosed, dust & vermin proof (protection class IP 43), (front & rear opening) with proper locking arrangement made out of MS angle iron frame size of 50mmx50mmx6mm and CRCA sheet of 3.15 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system, provided with danger notice plate with skull & bone sign, PVC gasket and sealed and shall be complete with Alluminium busbar of 400Amps rating with suitable size of PVC insulated copper conductor for internal wiring, thimbles glands complete all as specified and directed with all necessary accessories. The cost of the PCC pedestal is deemed to be included in the quoted rate of above item. The panel will comprise of the following :- (for single Offrs accn) (a) MCCB 200 A, 4P, 26 KA, 430 V- 01 Nos. (I/C) (b) MCCB 63 A, 4P, 25 KA -03 Nos (O/G), (c) MCCB 40 A 4 25KA - 01 Nos (O/G) (d) MCB 32 Amp SPN - 01 Nos, (e) Spare compartment -01 Nos (f) Indicator lamp (RYB) - 01 Set, (g) Digital type Voltmeter with selector switch -01 Set (h) Digital type Amperemeter with selector switch and suitable size of CTs -01 Set (j) Automatic single dial time switch panel mounted flush to panel door, 230V AC quartz time base, with one selector switch for auto/manual selection. Schneider CAT Part No 15336, Type IH24h Make- Schneider/L&T/Legrand or as equivalent in specified make list – 01 No.

Supply install, testing and commissioning of outdoor, CPRI approved LT panel board double door mounted on pedestal factory made, totally enclosed, dust & vermin proof (protection class IP 43), (front & rear opening) with proper locking arrangement made out of MS angle iron frame size of 50mmx50mmx6mm and CRCA sheet of 3.15 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system, provided with danger notice plate with skull & bone sign, PVC gasket and sealed and shall be complete with Alluminium busbar of 400Amps rating with suitable size of PVC insulated copper conductor for internal wiring, thimbles glands complete all as specified and directed with all necessary accessories. The cost of the PCC pedestal is deemed to be included in the quoted rate of above item. The panel will comprise of the following :- (for Jcos Block) (a) MCCB 160 A, 4P ,26 KA ,430 V- 01 Nos. (I/C), (b) 200 A, 4 strip AL Bus Bar mounted on insulators-01 set, (c) MCCB 63 A 4 25KA - 03 Nos (O/G), (d) MCB 32 Amp SPN - 01 Nos, (e) Spare compartment -01 Nos, (f) Indicator lamp (RYB) - 01 Set, (g) Digital type Voltmeter with selector switch -01 Set, (h) Digital type Amperemeter with selector switch and suitable size of CTs -01 Set, (j) Timer and contactor

Supply install, testing and commissioning of outdoor, CPRI approved LT panel board double door mounted on pedestal factory made, totally enclosed, dust & vermin proof (protection class IP 43), (front & rear opening) with proper locking arrangement made out of MS angle iron frame size of 50mmx50mmx6mm and CRCA sheet of 3.15 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system, provided with danger notice plate with skull & bone sign, PVC gasket and sealed and shall be complete with Alluminium busbar of 400Amps rating with suitable size of PVC insulated copper conductor for internal wiring, thimbles glands complete all as specified and directed with all necessary accessories. The cost of the PCC pedestal is deemed to be included in the quoted rate of above item. The panel will comprise of the following :- (for Jcos Block) (a) MCCB 160 A, 4P, 26 KA,430 V- 01 Nos. (I/C), (b) MCCB 40 A, 4P, 25KA - 02 Nos (O/G), (c) MCB 63 Amp SPN - 01 Nos, (d) MCB 32 Amp SPN - 01 Nos, (e) Spare compartment -01 Nos, (f) Indicator lamp (RYB) - 01 Set (g) Digital type Voltmeter with selector switch -01 Set (h) Digital type Amperemeter with selector switch and suitable size of CTs -01 Set (j) Timer and contactor

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion complete all as per specified and as directed.

Supply and fixing glass fibre reinforced UV protected polycabonate Cable junction box IP 66, weather proof for mounting on the street light pole of size 205x255x112mm complete with 01 No 5 way terminal suitable for 10 sqmm to 25 sqmm cable complete with knockouts for cable entr - Black colour complete all as specified and directed.

M & L for security light energy saving & environmental friendly long life LED light made up of pressure Versatile die-cast aluminium housing with LED as lighting source of capacity 35W LED, IP 65 protection including connection with aluminium twin core PVC insulated 2.5 sqmm junction box to street light fitting and brackets made out of GI pipe 32mm dia medium grade, 1.2mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FIat, nuts, bolts complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed.

M & L for RCC septic tank conventional type for 20 users design to carry sewage and sludge water constructed with RCC M-30 (Design Mix) including excavation in any type of soil earthwork, returning, filling in and removal of soil upto not exceeding 50m and as shown in TD drawing No. TD/SZ/504 sheet 1/1 and as specified and directed.

M & L for RCC septic tank conventional type for 50 users design to carry sewage and sludge water constructed with RCC M-30 (Design Mix) including excavation in any type of soil earthwork, returning, filling in and removal of soil upto not exceeding 50m and as shown in TD drawing No. TD/SZ/504 sheet 1/1 and as specified and directed.

M & L for soakage well of size 1.2 m dia and 3 m effective depth including intercepting chamber and screen chamber, including excavation in any type of soil earthwork, returning, filling in and removal of soil upto not exceeding 50m and as shown in TD drawing No. CESZ/2020/TD-45, sheet 1/2 & 2/2 complete all as specified and directed.

M & L for soakage well of size 1.8 m dia and 3 m effective depth including intercepting chamber and screen chamber, including excavation in any type of soil earthwork, returning, filling in and removal of soil upto not exceeding 50m and as shown in TD drawing No. CESZ/2020/TD-45, sheet 1/2 & 2/2 complete all as specified and directed.

Supply & fix Bib taps, fancy type, chromium plated cast copper alloy two way type (suitable for fixing a health faucet) suitable for 20 mm outer dia of CPVC pipe complete all as specified and directed.

Supply & fix cromium plated health faucet suitable for 20 mm outer dia of CPVC pipe with 1.25m long flexible tube and wall hook including making connections complete all as specified and directed.

Supply & fix cromium plated wall mixer for mixing hot & cold water screwed down suitable for 20 mm outer dia of CPVC pipe with accessories complete all as specified and directed.

Point wiring with 1.5 Sq. mm (nominal cross sectional area) PVC insulated and un-sheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLS cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one light/fan point controlled by one way switch.

Point wiring with 1.5 Sq. mm (nominal cross sectional area) PVC insulated and un-sheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLS cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one socket outlet point 6 Amp on independent board.

Point wiring with 2.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit and conduit accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one16 Amps socket outlet on independent board.

S&F Piano Switch single pole flush type 6 Amps, 230 Volt, 2 Way.

Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 Sq mm (nominal area), 1100 volts grade drawn through and including adequate size PVC concealed conduit and accessories (IS-694 marked in PVC conduit) and fittings and one run of 6.0 Sq mm single core FRLS multistranded copper conductor cable as earth continuity conductor. NOTES :- (a) Two runs of copper conductor, one run of earth wire and one run of conduit shall be measured as one run length.

Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 Sq mm (nominal area), 1100 volts grade drawn through and including adequate size PVC concealed conduit and accessories (IS-694 marked in PVC conduit) and fittings and one run of 4.0 Sq mm single core FRLS multistranded copper conductor cable as earth continuity conductor. NOTES :- (a) Two runs of copper conductor, one run of earth wire and one run of conduit shall be measured as one run length.

Supply and fix MCB Single Pole and Neutral 240 volts, 6 Amps to 32 Amps, 10KA rupturing capacity, 'C' series complete all as specified.

Supply and fix MCB Single Pole 240 volts, 6Amps to 32 Amps, 10KA rupturing capacity, 'C' series complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 225mm sweep with blades, and frame and with self closing louvers, 1400 RPM, Air Delivery 750CMH, electrically connecting with twisted three core PVC insulated unsheated flexisble cord of suitable size copper conductor cable from ceiling rose to Exhaust fan complete all as specified and directed.

S & F Basic all purpose surface and wall mounted LED batten of 20 watt, high quality aluminium extruded with decorative end caps with housing & integrated electronic driver 20 watt, 230 volts complete with all accessories including and connecting of with twin core PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed.

S & F Basic all purpose surface and wall mounted LED batten of 10 watt, high quality aluminium extruded with decorative end caps with housing & integrated electronic driver 10 watt, 230 volts complete with all accessories including and connecting of with twin core PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed.

S&F BEE star-rated energy efficient LED Retrofit bulb of 9 Watts complete all as specified and directed

S & F fancy type light fitting Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed.

S & F new generation energy saving and environmental friendly long life LED security light 35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 25mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed

S&F single phase electronic temper proof kWh meter LCD type, Base Mounting type, meter class 1.0 accuracy, 240 volt system with backlit LCD display of rating 10 to 60 Amps complete all as specified and directed.

S&F single phase electronic temper proof kWh meter LCD type, Base Mounting type, meter class 1.0 accuracy, 240 volt system with backlit LCD display of rating 5 to 30 Amps. Complete all as specified and directed.

Supply install, testing and commissioning of indoor wall mounted type Feeder Pillar box, factory made, totally enclosed, dust & vermin proof, (front opening) with proper locking arrangement made out of MS angle iron frame size of 25mmx25mmx6mm and CRCA sheet of 2 mm thick with epoxy powder coated after dip coated primer manual type control, rust proof Siemens grey, structural RAL 7032, compartment wise with 6 mm thick fibre sheet for mounting MCB/MCCB's, Electric meters and other accessories, copper bus bar, copper earth bus strip etc, pre wired & connection with existing PVC/XLPE insulated cable with provision of joints Lugs gland etc all as specified & directed and consisting of the following including necessary PCC work for grouting in walls, etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed by Engr-in-charge.(for Officers Accn):- Incoming:- (i) MCCB TPN 125 Amps, 16 KA ,415 Volts -01 No (ii) Digital Voltmeter 0-500 V with selector switch - 01 No. (iii) Digital Ammeter 0-200 Amps with CTs and selector switch - 01 Set (iv) Indicator lamp (RYB) (set of three) - 01 Set Outgoing: - (i) MCB SPN 40 Amps, 10 KA, 230 Volts - 12 Nos (ii) Space for fixing single phase electronic temper proof kWh meter LCD type, Base Mounting type - 12 Nos Note: (i) Electric supply to Feeder Pillar box shall be measured and paid seperately. (ii) Electric meter shall be measured and paid seperately.

Supply install, testing and commissioning of indoor wall mounted type Feeder Pillar box, factory made, totally enclosed, dust & vermin proof, (front opening) with proper locking arrangement made out of MS angle iron frame size of 25mmx25mmx6mm and CRCA sheet of 2 mm thick with epoxy powder coated after dip coated primer manual type control, rust proof Siemens grey, structural RAL 7032, compartment wise with 6 mm thick fibre sheet for mounting MCB/MCCB's, Electric meters and other accessories, copper bus bar, copper earth bus strip etc, pre wired & connection with existing PVC/XLPE insulated cable with provision of joints Lugs gland etc all as specified & directed and consisting of the following including necessary PCC work for grouting in walls, etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed by Engr-in-charge.(for JCO's Accn):- Incoming:- (i) MCCB TPN 100 Amps, 16 KA ,415 Volts -01 No (ii) Digital Voltmeter 0-500 V with selector switch - 01 No. (iii) Digital Ammeter 0-200 Amps with CTs and selector switch - 01 Set (iv) Indicator lamp (RYB) (set of three) - 01 Set Outgoing: - (i) MCB SPN 25 Amps, 10 KA, 230 Volts - 16 Nos (ii) Space for fixing single phase electronic temper proof kWh meter LCD type, Base Mounting type - 12 Nos Note: (i) Electric supply to Feeder Pillar box shall be measured and paid seperately. (ii) Electric meter shall be measured and paid seperately.

Supply install, testing and commissioning of indoor wall mounted type Feeder Pillar box, factory made, totally enclosed, dust & vermin proof, (front opening) with proper locking arrangement made out of MS angle iron frame size of 25mmx25mmx6mm and CRCA sheet of 2 mm thick with epoxy powder coated after dip coated primer manual type control, rust proof Siemens grey, structural RAL 7032, compartment wise with 6 mm thick fibre sheet for mounting MCB/MCCB's, Electric meters and other accessories, copper bus bar, copper earth bus strip etc, pre wired & connection with existing PVC/XLPE insulated cable with provision of joints Lugs gland etc all as specified & directed and consisting of the following including necessary PCC work for grouting in walls, etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed by Engr-in-charge.(for JCO's Accn):- Incoming:- (i) MCCB TPN 63 Amps, 16 KA ,415 Volts -01 No (ii) Digital Voltmeter 0-500 V with selector switch - 01 No. (iii) Digital Ammeter 0-200 Amps with CTs and selector switch - 01 Set (iv) Indicator lamp (RYB) (set of three) - 01 Set Outgoing: - (i) MCB SPN 16 Amps, 10 KA, 230 Volts - 12 Nos (ii) Space for fixing single phase electronic temper proof kWh meter LCD type, Base Mounting type - 12 Nos Note: (i) Electric supply to Feeder Pillar box shall be measured and paid seperately. (ii) Electric meter shall be measured and paid seperately.

Point wiring with 1.5 Sq. mm (nominal cross sectional area) PVC insulated and un-sheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLS cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one light/fan point controlled by two way switch.

Supply and fix LED post top light fitting 40W, made in cast aluminium with decorative opal polycarbonate diffuser with IP65 protection complete all as specified and directed. Make: Cat part No. CELESTA BGCL 40W LED WH of Bajaj or as equivalent in specified makes

Supply & Fix TV outlet socket boxes, 4 module all as specified and directed.

Supply & Fix Telephone outlet socket boxes, 4 module all as specified and directed.

Supply & fix PVC insulated 2.5 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular complete all as specified and directed.

Supply & Fix LED light fitting, 1x5W, 230V attractive wall mounted bed side reading light without shade with ballasts, lamp holder, connector block, etc. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.