Tribal Welfare Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Tribal Welfare Engineering Department - TWED Tender
Opening Date10 Dec 2019
Closing Date24 Dec 2019
Tender Amount₹ 60,46,078
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
302600Bid Award Id
ViewTender No
Nit.No.65/2019-20/SE/TW/SCA/DB/Dt.03.12.2019Tender Authority
Tribal Welfare Engineering Department ViewPurchaser Address
-Website
http://http://www.aptribes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Vibrated Reinforced Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Broken Granite (IS383, 1970) Machine Crushed Graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying concrete, finishing top surface, curing concrete, etc., complete for finished item of work for (APSS No. 402) Dummy Columns Ground floor
3.27
32013
9790.05
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.
31.2
310760
9960.25
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pedastals.
3.95
41615
10535.45
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for PLINTH BEAM
9.84
122766
12476.25
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns GROUND FLOOR
13.28
160129
12057.9
... More
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels GROUND FLOOR
2.19
25513
11649.75
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Beams GROUND FLOOR
10.89
113438
10416.7
... More
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Shelves of 50mm thick Shelves Ground FLOOR
12.04
9430
783.25
... More
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Shelves of 75mm thick Shelves GROUND FLOOR
2.36
2242
949.95
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 115mm thick GROUND FLOOR
267.91
319295
1191.8
... More
Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 150mm thick Ground FLOOR
31.57
45072
1427.7
... More
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work GROUND FLOOR
15
12999
866.6
... More
Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)
235.26
869309
3695.1
... More
Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for superstructure Walls.
98.38
689732
7010.9
... More
Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for superstructure Walls. First Floor
6.58
49566
7532.8
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in Ground floor. (APSS No.126)
11
626820
56983.6
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3)20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work GROUND FLOOR
379.84
178950
4711.2
... More
Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, screened sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904) GROUND FLOOR
276.83
125828
4545.3
... More
Plastering to even surfaces of wall with CM (1:4) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) GROUND FLOOR
30.08
10077
3350.15
... More
Plastering to even surfaces of wall with CM (1:4) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) GROUND FLOOR
192.95
68886
3570.15
... More
Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc.,for Even Surface of brick wall complete for finished item of work. (APSS 901,903 & 904) Ground Floor
676.5
296107
4377.05
... More
Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., for Even Surface of brick wall complete for finished item of work. (APSS 901,903 & 904) First Floor
127.6
60400
4733.55
... More
Ceiling plastering with CM (1:3) Prop: 12mm thick in single coat spong finish including cost and conveyance of all materials like cement, sand, water etc, to site, including seigniorage charges, sales & other taxes on all mateials, all operational, incidental cahrges and labour charges such as mixing mortar, finishing, curing, etc, complete for finished item of work (APSS 901,906) for GROUND FLOOR
270.75
96283
3556.15
... More
Flooring with Nano polished/stain free soluble salt porcelain vitrified tiles sceen printed of size 600x600mm and thickness between 8-10mm 1st quality conforming to IS:13711,IS13712,IS13630 (Parts 1 to 15 of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3Kgs per sqm & joined neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, water and tiles etc, cto site including deigniorage charges etc, complete for finished item of work. GROUND FLOOR
168.83
165159
9782.55
... More
Flooring with ceramic tiles non-skid red or white full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Ground Floor
74.04
67017
9051.4
... More
Ellis pattern flooring with CC(1:5:10) using 40mm HBG metal with 80mm thick and top finishing with CM(1:2:4) using 20mm HBG metal with 40mm thick including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing , laying, curing, etc., complete for finished item of work (APSS No.402)
20.07
13056
6505.01
... More
Dadooing to walls with red or white full body ceramic floor tiles of size 200mm x 300mm/245mmx325mm and thickness 6mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in Ground Floor
591.63
505604
8545.95
... More
Supply and fixing powder coated aluminium fully glazed OPENABLE single SHUTTER door as per the approved drawing with fixed fan light of 500mm height at top door using anodized aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and bottom rail of 47.62mm x 44.45mm , 3.18 mm thick and middle rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick 5 mm thick plain glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, shutter fitted with 5mm thick ground glass in the top half and 12mm thick prelaminated particle board ( One side choice colour and other side balancing white lamnation ) in the bottom half fitted with suitable aluminium glazing clips and rubber beading,mounted on floor springs of first qutality as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 4 Nos. 300mm x 12mm dia tower bolts ,4 Nos.alluminium handles 150mm dia and 2 Nos. aldrops 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., complete for finished item of work. ( The Aluminium section used shall be standard make confirming to IS 1948 – 1961 ) and as approved by the Engineer ) ( 1400mmx2530mm )
7.21
40973
5682.82
... More
Supply and fixing powder coated alimunium sliding DOUBLE SHUTTER window with fixed fan light at top as per approved drawings with all required accessories such as stoppers, bolts, weather stripping etc. for all sizes and sections in accordance with approved drawings and as per IS 1948-1961 with top section of window of size 62mm x 32mm, 1.47mm thick, window side frames of size 61.85mm x 31.75mm, 1.50mm thick and bottom frame size 61.85mm x 31.75mm, 1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom, sides and top with section of 40mm x 18mm, 1.70mm thick, inter locking section 40mm x 28mm x 18mm, 1.60mm thick inter locked for weather scaling and mounted on nylon rollers of lift type and fan light top & side sections of size 63.50mm x 38.10mm, 1.53mm thick, powder coating of all alluminium sections 25microns thick and fixing 5mm thick PIN HEADED glassIN SHUTTER AND PLAINGLASS in fanlight fitted with alluminium glazing clips and rubber beading, powder coating of all alluminium sections 25microns thick including cost and conveyance to site of powder coated aluminium sections, glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, etc., complete for finished item of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (1200mm x 1700mm)
26.57
96000
3613.09
... More
Supply and fixing powder coated alimunium sliding DOUBLE SHUTTER window with fixed fan light at top as per approved drawings with all required accessories such as stoppers, bolts, weather stripping etc. for all sizes and sections in accordance with approved drawings and as per IS 1948-1961 with top section of window of size 62mm x 32mm, 1.47mm thick, window side frames of size 61.85mm x 31.75mm, 1.50mm thick and bottom frame size 61.85mm x 31.75mm, 1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom, sides and top with section of 40mm x 18mm, 1.70mm thick, inter locking section 40mm x 28mm x 18mm, 1.60mm thick inter locked for weather scaling and mounted on nylon rollers of lift type and fan light top & side sections of size 63.50mm x 38.10mm, 1.53mm thick, powder coating of all alluminium sections 25microns thick and fixing 5mm thick PIN HEADED glassIN SHUTTER AND PLAINGLASS in fanlight fitted with alluminium glazing clips and rubber beading, powder coating of all alluminium sections 25microns thick including cost and conveyance to site of powder coated aluminium sections, glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, etc., complete for finished item of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (900mm x 1200mm)
1.08
6266
5801.6
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2Nos. of 10mm MS Square bars and ISI marked flush door shutter (ANAND/RAAVILA/KUTTY/STANDARD/SUBHDWAR/ITP) of 35mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681)300mm long , 2 Nos tower bolts- 10mm bolts (IS:204) of 300 mm long at top, 1 No. tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos. 150mm long handles (IS:208) , 2 Nos heavy duty door stopper and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including Overheads & Contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1800mm x 2600mm) (BLD-CSTN-13-16)
4.41
15497
3514
... More
Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI marked flush door shutter (ANAND/RAAVILA/KUTTY/STANDARD/SUBHDWAR/ITP) of 30mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos MS Z hold fasts of size 300mm x 40mm x 5mm including ISI marked aluminium fixtures 3 Nos butt hinges of 150mm long,1 No. aldrop 250 mm long, 1 No. tower bolt of 300 mm x 12mm dia, 2 Nos 125mm long handles,1 No. rubber bush including supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including Overheads & Contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth of not less than 10mm) ( 750mm x 2100mm )(BLD-CSTN-13-16)
14.18
70418
4966
... More
Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters (ANAND/RAAVILA/KUTTY/STANDARD/SUBHDWAR/ITP)of 35 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 3 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 1 No tower bolt of 300 mm x 12 mm dia at top , 2 Nos 150 mm long handle , 1 No heavy duty door stopper and 1 No rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc, including Overheads & Contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2100mm) (BLD-CSTN-13-16)
11.88
53816
4530
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2Nos. of 10mm MS Square bars and ISI marked flush door shutter (ANAND/RAAVILA/KUTTY/STANDARD/SUBHDWAR/ITP) of 35mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides,including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 2 Nos tower bolts of 300 mm x 12 mm dia at top, 1 No. tower bolt of 150mm x 12mm dia at bottom, 2 Nos. 150mm long handles, 2 Nos heavy duty door stoppers and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including Overheads & Contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2600mm) (BLD-CSTN-13-16)
7.8
29562
3790
... More
Supply and fixing of doors as per approved drawings with Medium teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2Nos. of 10mm MS Square bars and ISI marked flush door shutter of 35mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 2 Nos tower bolt of 300 mm x 12 mm dia at top, 1 No. tower bolt of 150mm x 12mm dia at bottom, 2 Nos. 150mm long handle, 2 Nos heavy duty door stopper and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2600mm)
6
23370
3895
... More
Supply and fixing of M.S Grill of Door of size 1.65x3.10 M with outer angular frame 40x40x6mm of rolled steel equal angle of ISA 2525 of size 35mm x 35mm x 6mm welded with safety bars of 10mm square rods at 100mm centre to centre horizontally and vertically Hardware fixtures MSPC Butt Hinges 100mm long 6nos, MSPC Tower Bolt 150mm long 2nos, MSPC Aldrop 300mm long 2 nos including red oxide primer of grade -I quality, sales and other taxes, cost and conveyance of all materials to site, al labour charges and fixing in position etc., complete for finished item of work
5.12
20736
4050
... More
Supply and fixing of M.S Grill Window of size 1.15x1.65 M with outer angular frame of rolled steel equal angle of ISA 2525 of size 25mm x 25mm x 5mm welded with safety bars of 10mm square rods at 100mm centre to centre horizontally and vertically including red oxide primer of grade -I quality, sales and other taxes, cost and conveyance of all materials to site, al labour charges and fixing in position etc., complete for finished item of work
26.57
44053
1658
... More
Supply and fixing of M.S Grill Window of size 0.90x1.20 M with outer angular frame of rolled steel equal angle of ISA 2525 of size 25mm x 25mm x 5mm welded with safety bars of 10mm square rods at 100mm centre to centre horizontally and vertically including red oxide primer of grade -I quality, sales and other taxes, cost and conveyance of all materials to site, al labour charges and fixing in position etc., complete for finished item of work
1.08
2218
2054
... More
Painting to New wood work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coatof wood Primer finishing with putty for wood work after thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors
88.28
16769
1899.5
... More
Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors
32.84
3562
1084.8
... More
Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)
911.9
165843
1818.65
... More
Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar / Macoplast / Modimake concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.
117.15
9694
82.75
... More
Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar / Macoplast / Modimake concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.
140.01
14112
100.79
... More
Drilling of bore well by the down the hole hammer drilling finished dia of 150/165mm in all formations suitable for down the hole hammer drilling such as medium hard rock formation, al consolidated formations etc., and reaming the bore to sub insertion of 180mm UPVC casin pipe etc., confirming to IS specifications of 6Kg/cm2 including insertion of UPVC casing pipe with couplings sand any other relevant materials upto required depth as directed by the department, transportation of drilling rigs and supporting vehicle and including bore development and flushing bore at an average pressure of 150 PSI and conducting the yiel test and crew charges required in fixation of pipe assemble completely done to the satisfaction of the department as stipulated in the rechnical specifications bu excluding cost of casing pipe, couplings, cap etc as per IS 2800 part 1 & 2 1979 and amendements time to time
75
42750
570
... More
Manufacture, Supply and delivery of Unplasticised PVCs pipes for potable water supplies confirming to IS:4985/2000 (third revision) with bell neds (socket) as per specifications in light Grey/Natural Ivory Grey/ any other color (Expcept White) inclusive of transportation to the sub- divisional stores anywhere in ap excluding excise duty and slaes tax etc., for 180mm dia UPVC casing pipe
65
46970
722.62
... More
Manufacture, Supply and delivery of Unplasticised PVCs pipes for potable water supplies confirming to IS:4985/2000 (third revision) with bell neds (socket) as per specifications in light Grey/Natural Ivory Grey/ any other color (Expcept White) inclusive of transportation to the sub- divisional stores anywhere in ap excluding excise duty and slaes tax etc., for 250mm dia UPVC casing pipe
6
8644
1440.65
... More
Provision for slotting charges
30
7500
250
... More
Provision for End Cap
1
395
395
... More
Provision for geologist charges
1
6000
6000
... More
Provision for yield test charges
1
7500
7500
... More
Provision for erection charges
1
1300
1300
... More
Transportation and supply of 1.50HP 10 stage single phase ISI submersible motor pumpset suitable for 4" Bore well.
1
16200
16200
... More
Transportation and supply of control panel for single phase submersible motors up to 3 HP @220V 50Hz operating range between 80 to 240V including supply and fixing of direct on link LTLK/SIEMENS/CROMPTON make volt meter and ammeter with starting and running capacitors
1
4500
4500
... More
supply of 3 core 2.5 sqmm flat copper cable as per IS694:1990 for submersible motors.
130
11700
90
... More
Transportation and supply of outer dia 50mm and inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN-50086/IS 14930 part-II.
95
8550
90
... More
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, sales and other taxes on all materials etc., complete for finished item of work. (A.P.S.S. No. 1325).
7
68548
9792.5
... More
Supplying and fixing of PVC/SWR pipes (Prince/Sudhakar) 4 Kg/Sq.cm and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of worl at all floor levels (APSS No.1302 1319 & 1326) 75mm dia
55.5
6965
125.5
... More
Supplying and fixing of PVC/SWR pipes (Prince/Sudhakar) 4 Kg/Sq.cm and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of worl at all floor levels (APSS No.1302 1319 & 1326) 110mm dia
61.2
13770
225
... More
Supplying & fixing CI Nahani traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs with N.P. Cover for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No 1326) for All Floors.
2
654
327.2
... More
Supplying & Fixing European W.C 1st quality ISI marked conforming to IS:2556-Part-2-1973 of Hindware/ Parryware/ Neycer - make white glzes with ‘S’ trap,supplying and fixing best Indian make plastic seat and lid for Europen water closets with rubber or plastic Buffers as per IS2548-1996 and 10 liters capacity single flush PVC low level cistern Parryware or equivalent with internal components and CPshort bend and fixed using required size of nails and screws,12mm PVC connections with brass union nuts CPcoated and 12.70mm dia.NPbib tap 400grams Seiko or equivalent including cost and conveyance of all matrials to site, Overheads & Contractors profit etc., complete for finished item of work for all floors.
1
4230
4229.9
... More
Supplying & Fixing 550 x 400 mm Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore single Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Nice/Senior or equivalent complete with standard CI brackets including wooden block, 12.7mm PVC connection with Brass union nut CP coated, 12.7mm dia first qualifty NP angle stop cock, 38.1mm CP waste coupling , 31.75mm dia PVC flexible waste pipe of 914.4mm length of first quality including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. for All Floors.
7
18189
2598.4
... More
Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories complete for finished item of work for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.
2
14704
7352
... More
Supplying & fixing single bowl stainless steel sink size 24" x 18" x 8" (609.6x457.2x203.2mm) 1 mm thick with accessories complete for finished item of work for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.
1
5794
5794.4
... More
Supplying and fixing TV shape mirror with plastic frame size 609.6 x 457.20mm including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.
5
2568
513.55
... More
Supplying & Fixing of 25.4mmdia,609.6mm long aluminium anodized towel rods with brackets and aluminium screws etc.,complete including cost and conveyance of all materials to site, Overheads & Contractors profit etc., complete for finished item of work for all floors..
15
2489
165.9
... More
Supplying & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko / Nice/ Senior or equivalent including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.
12
3041
253.4
... More
Supplying and fixing of 10 Litres capacity Single Flush PVC Low level flusing system parryware, slimline with internal componenets and short bend including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for all floors
2
2850
1424.75
... More
Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors
2
3811
1905.35
... More
Supplying and fixing Nominal Bore G.I. Pipe Medium grade properties & weight confirming to relevant IS code 1239 with GI fittings such as Elbows, Tees, Couplings, Nipples, Plugs but excluding GI Bends, Union GI connections with check out and Socket TATA or Zenith make or equivalant including excavation for trenches and refilling the trenches cost and conveyance of all materials to site labour charges, taxes etc., complete for finished item of work.20mmdia
11.3
2543
225
... More
Supplying and fixing Nominal Bore G.I. Pipe Medium grade properties & weight confirming to relevant IS code 1239 with GI fittings such as Elbows, Tees, Couplings, Nipples, Plugs but excluding GI Bends, Union GI connections with check out and Socket TATA or Zenith make or equivalant including excavation for trenches and refilling the trenches cost and conveyance of all materials to site labour charges, taxes etc., complete for finished item of work.25mmdia
242.65
71145
293.2
... More
Supplying and fixing Nominal Bore G.I. Pipe Medium grade properties & weight confirming to relevant IS code 1239 with GI fittings such as Elbows, Tees, Couplings, Nipples, Plugs but excluding GI Bends, Union GI connections with check out and Socket TATA or Zenith make or equivalant including excavation for trenches and refilling the trenches cost and conveyance of all materials to site labour charges, taxes etc., complete for finished item of work.32mmdia
98.2
40056
407.9
... More
Supply and fixing of 20 mm dia - UPVC Pipe
50.5
919
18.2
... More
Supplying & fixing tested gun metal peet valve of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - make or equivalent screwed type 1st quality of approved type including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors. 32 mm
1
1811
1811.1
... More
Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
2000
11400
5.7
... More
No of items 77 (SEVENTY SEVEN ITEMS) only
-
6458795
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements