Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Furnitures and Fixtures
Eprocure
Opening Date18 Jan 2024
Closing Date22 Feb 2024
Tender Amount₹ 75,90,000
Costs
EMD
₹ 1,38,850Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_636180_1Bid Award Id
ViewTender No
82401/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All as per Item No.1 above but replacing the front/side/back rail of Chair Dining. [FD-279, 228 & 203]
160
-
-
... More
All as per Item No.1 above but replacing the bottom stiffener of Chair Dining. [FD-279, 228 & 203]
175
-
-
... More
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining completeall as shown in drawings and as specified. [FD-279, 228 & 203]
400
-
-
... More
M & L for fixing MS right angle of size 50X25X5mm thick on any one corner of chair dining by screwing to side rail and leg of chair all as specified and as directed by Engr-in-Charge. [FD-279, 228 & 203]
1600
-
-
... More
M & L for preparation of old treated wooden surfaces of chair dining as per drawing No FD-16/227/260/279 and applying two coats of french polish complete all as specified and directed.
400
-
-
... More
M&L for removal of existing broken / unserviceable front /back/ side rail of Chair dining cushioned, replacing the same with new teak wood front/back/side rail, size & dimension of the parts shall be of the same pattern/size as shown in drawing and specification, fixed to main frame and legs of chair dining cushioned and apply two coats of french polish to all replaced parts to match with existing complete all as specified and directed [FD/E6/MAP/10/10(R)]
200
-
-
... More
All as per Item No.9 above but replacing the front leg of chair dinning cushioned [FD/E6/MAP/10]
150
-
-
... More
All as per Item No.9 above but replacing the back stiffener of chair dinning cushioned [FD/E6/MAP/10]
150
-
-
... More
M&L for removal of old unserviceable seat of chair dining cushioned and fixing new cushion of 75mm thick, 32 density foam seat, covered with fabric of approved colour fixed to 12mm thick BWR commercial plywood seat of Chair Dining cushioned complete all as specified and directed [FD/E6/MAP/10/10(R)]
300
-
-
... More
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of chair dining cushioned as shown in drawing and as specified. [FD/E6/MAP/10/10(R)]
300
-
-
... More
M & L for fixing MS right angle of size 50X25X5mm thick on any one corner of chair dining cushioned by screwing to side rail and leg of chair all as directed and as specified [FD/E6/MAP/10/10(R)]
120
-
-
... More
M & L for preparation of old treated wooden surfaces of chair dining cushioned as per drawing No [FD/E6/MAP/10/10(R)] and applying two coats of french polish complete all as specified and directed.
300
-
-
... More
M & L for removal of existing broken / unserviceable front /back/ side rail of Chair dining JCO/OR, replacing the same with new teak wood front/back/side rail , size & dimension of the parts shall be of the same pattern/size as shown in drawing and specifications and fixed to main frame and legs of Chair dining JCO/OR and applying two coats of french polich to all replaced parts to match with existing all as specified and directed [FD/MAP-II/05]
175
-
-
... More
All as per Item No.16 above but replacing the front leg of chair dinning JCO/OR [FD/MAP-II/05]
150
-
-
... More
All as per Item No.16 above but replacing the Rear leg of chair dinning JCO/OR [FD/MAP-II/05]
150
-
-
... More
All as per Item No.16 above but replacing the back rest/bend stiffener of chair dinning JCO/OR [FD/MAP-II/05]
150
-
-
... More
All as per Item No.16 above but replacing the bottom stiffener of chair dinning JCO/OR [FD/MAP-II/05]
250
-
-
... More
M&L for stiffener made out of 25 x 25 mm 1st class hard wood (Teak) having a length of 430 mm under PVC seat to sustain weight applied to chair dining by fixing horizontally between top of two side rails of chair dining suitable for fixing PVC seat over new stiffner and all exposed surfaces of replaced parts duly french polished complete all as specified and directed (FD/MAP-II/05).
500
-
-
... More
M&L for removal of old unserviceable broken PVC seat of chair dining JCO /OR and fix new PVC seat of make AMCO or equalent in Chair Dining JCO/OR complete all as specified and directed (FD/MAP-II/05).
500
-
-
... More
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair Dining JCO/OR as shown in drawing (FD/MAP-II/05)
500
-
-
... More
M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair Dining JCO/OR by screwing to side rail and leg of Chair all as specified and directed (FD/MAP-II/05).
2000
-
-
... More
M & L preparation of old treated wooden surfaces of Chair Dining JCO/OR and applying two coats of french polish complete all as specified and directed. (FD/MAP-II/05)
500
-
-
... More
Removal of existing broken/unserviceable front leg of chair writing, replacing the same with new front leg 1st class hard wood (Teak), size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and apply two coats of french polich to all replaced parts to match with existing all as specified and directed (FD-280/250)
150
-
-
... More
All as per item No. 26 above but replacing rear leg of chair writing (FD-280/250)
120
-
-
... More
All as per item No. 26 above but replacing back rest of chair writing (FD-280/250)
125
-
-
... More
All as per item No. 26 above but replacing arm rest of chair writing (FD-280/250)
130
-
-
... More
All as per item No. 26 above but replacing bottom stiffner of chair writing (FD-280/250)
150
-
-
... More
All as per item No. 26 above but replacing front / back/side rail of chair writing (FD-280/250)
150
-
-
... More
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair writing complete all as shown in drawing and as specified (FD-280/250)
250
-
-
... More
M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair writing by screwing to side rail and leg of Chair all as specified and directed by Engr in charge (FD-280/250).
1000
-
-
... More
M & L preparation of old treated wooden surfaces of Chair Writing and applying two coats of french polish complete all as specified and directed. (FD/280/250)
250
-
-
... More
Removal of existing broken/unserviceable front leg of Chair wooden bottom without arms , replacing the same with new front leg 1st class hard wood (Teak), size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and applying two coats of french polich to all replaced parts to match with existing all as specified and directed (FD-285 & 225)
80
-
-
... More
All as per item No. 35 above but replacing rear leg of Chair wooden bottom without arms. (FD-285 & 225)
70
-
-
... More
All as per item No. 35 above but replacing back rest of Chair wooden bottom without arms. (FD-285 & 225)
70
-
-
... More
All as per item No. 35 above but replacing front/rear/side rail of Chair wooden bottom without arms. (FD-285 & 225)
100
-
-
... More
All as per item No. 35 above but replacing stiffner of Chair wooden bottom without arms. (FD-285 & 225)
100
-
-
... More
Removal of existing broken / unserviceable plywood seat of chair wooden bottom without arms and replacing the same with new one side teak wood plywood seat 6mm thick fixed to bottom frame of the seat with steel screws @ 75mm C/C complete all as shown on drg and as specified. (FD-285 & 225)
250
-
-
... More
Removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair wooden bottom as shown in drawing and as specified (FD-285/225)
250
-
-
... More
M&L for fixing MS right angle of size 50x25x5 mm thick on any one corner of Chair wooden bottom by screwing to side rail and leg of Chair all as specified and directed (FD-285/225)
1000
-
-
... More
M & L for preparation of old treated wooden surfaces of Chair wooden bottom and applying two coats of french polish complete all as specified and directed. (FD/285/225)
250
-
-
... More
Removal of existing broken/unserviceable front/rear leg of Chair easy and replacing the same with new front/rear leg 1st class hard wood (Teak), size & dimension of the parts shall be of the same pattern/size as shown in drawing as well as specification and applying two coats of french polish to all replaced parts to match with existing all as specified and directed (FD-229 & 201)
120
-
-
... More
All as per item No. 44 above but replacing arm rest of Chair easy (FD-229 & 201)
100
-
-
... More
All as per item No. 44 above but replacing front/rear/back rail of seat frame of Chair easy (FD-229 & 201)
150
-
-
... More
All as per item No. 44 above but replacing top / bottom/side rail of back rest frame of Chair easy (FD-229 & 201)
150
-
-
... More
M&L for removal of existing broken PVC shoe from all legs and replacing with new PVC shoe (set of four) of suitable size to legs of Chair easy as shown in drawing (FD-229/201)
200
-
-
... More
M&L for fixing wooden right angle corner bracket of size 75x25 mm thick on any one corner of Chair easy by screwing to side rail and leg of Chair all as directed (FD-229/201)
500
-
-
... More
M & L preparation of old treated wooden surfaces of Chair Easy and applying two coats of french polish complete all as specified. (FD/229/201)
200
-
-
... More
Removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0 mm thick and of size 380 x 760 mm and fixing on the existing frame all as shown on drg and as specified. FD -230
100
-
-
... More
M&L for removal of old broken plywood back of mirror of Table dressing gents and replacing the same with new 6 mm plywood BWR, fixing to the existing frame alongwith 35x25 mm wooden beading alround all as shown on drg and as specified. FD -230
100
-
-
... More
M&L for removal of old broken particle board top/bottom of Table dressing gents drawer and replacing the same with 18 mm prelaminated particle board of size 900x300 of same colour & texture of exisiting item complete all as shown on drg and as specified. FD -230
100
-
-
... More
M&L for removal of old broken drawer of Table dressing gents and replacing the same with drawer of size 340x300 mm fixed to existing frame all as shown on drg and as specified. FD -230
200
-
-
... More
S&F MS knob chromium plated 30 mm to drawer of table dressing Gents complete all as shown in drawings and as specified (FD-230)
200
-
-
... More
M & L preparation of old treated wooden surfaces of Table dressing Gents and applying two coats of french polish complete all as specified and as directed. (FD/230)
100
-
-
... More
M&L for removal of existing foggy/broken mirror of Table dressing gents and replacing the same with new mirror not less than 5.0 mm thick and of size 1200x600 mm and fixing on the existing frame all as shown on drg and as specified. (FD/E6/MAP/16)
80
-
-
... More
M&L for removal of old broken plywood back of mirror of Table dressing gents and replacing the same with new 6 mm BWR plywood fixing to the existing frame all as shown on drg and as specified. FD/E6/MAP/16
80
-
-
... More
S & F glass shelves of size 100x600x5 mm thick for Table dressing Gents complete all as specified and directed. (FD/E6/MAP/16)
240
-
-
... More
Removal of old broken leg of Table dressing gents and replacing the same with new 38x38x338 mm leg in 1st class hard wood (Teak) and 38x112x112 mm wooden bracket on top of leg fixing one side to wooden frame of mirror and other side to leg complete all as shown on drg and as specified. (FD/E6/MAP/16)
160
-
-
... More
M & L for preparation of old treated wooden surfaces of Table dressing Gents and applying two coats of french polish complete all as specified. (FD/E6/MAP/16)
100
-
-
... More
M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 366 x 1220 mm and fixing on the existing frame all as shown on drg and as specified. FD - 251/378
30
-
-
... More
M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm BWR plywood fixing to the existing frame alongwith 35x25 mm wooden beading alround all as shown on drg and as specified. FD -251/378
30
-
-
... More
M&L for removal of old broken drawer of Table dressing Ladies and replacing the same with drawer of size as shown on drg and as specified. FD -251/378
60
-
-
... More
M&L for removal of old broken glass door of Table dressing Ladies and replacing the same with glass door of size 5 mm thick of size as shown on drg and as specified. FD -251/378
60
-
-
... More
M&L for removal of old unserviceable aluminium channel of Table dressing Ladies and replacing the same with suitable size as shown on drg and as specified. FD -251/378
40
-
-
... More
S&F MS knob chromium plated 30 mm to drawer of Table dressing Ladies all as shown in drawing and as directed (FD-251/378)
120
-
-
... More
M&L for removing existing broken / unserviceable leg of Table dressing Ladies replacing the same with new leg Ist class hardwood (Teak) of size & dimention of the parts shall be of the same pattern / size as shown in drawing as well as specified and apply two coats of french polish to all replaced parts to match with exisitng all as specfied and directed (FD-251/378)
50
-
-
... More
M & L for preparation of old treated wooden surfaces of Table dressing Ladies and applying two coats of french polish complete all as specified and directed. (FD-251/378)
50
-
-
... More
M&L for removal of existing foggy/broken mirror of Table dressing Ladies and replacing the same with new mirror not less than 5.0 mm thick and of size 430 x 1230 mm and fixing on the existing frame all as shown on drg and as specified. FD/E6/MAP II/07
80
-
-
... More
M&L for removal of old broken plywood back of mirror of Table dressing Ladies and replacing the same with new 6 mm BWR plywood fixing to the existing frame alongwith 25x20 mm wooden beading alround all as shown on drg and as specified. FD/E6/MAP II/07
80
-
-
... More
M&L for removal of seat cushion of Table dressing Ladies with mirror (FD/E6/MAP II/07 and supply and fixing new foam cushion 75 mm thick having 32 density over 12 mm thick commercial plywood seat base. The foam cushion shall be duly stitched with tapestry cloth, cost of tapectry cloth used in the work shall be of not less than 350/- per meter and color, quality and design shall be approved by the GE complete all as shown in drg and as specified (FD/E6/MAP II/07)
150
-
-
... More
M&L for removing old broken particle board top/side/bottom of table dressing ladies with mirror and replacing with 18 mm particle board exterior grade top/side/bottom drawer of Table dressing ladies with mirror all as shown in drg and as specified (FD/E6/MAP II/07)
100
-
-
... More
S&F MS knob chromium plated 30 mm to drawer of Table dressing Ladies all as shown in drawing and as specified (FD/E6/MAP II/07)
150
-
-
... More
M&L for removal of old broken drawer of Table dressing Ladies and replacing the same with drawer of size as shown on drg and as specified. (FD/E6/MAP II/07)
80
-
-
... More
M & L preparation of old treated wooden surfaces of Table dressing Ladies and applying two coats of french polish complete all as specified and directed. (FD/MAP-II/07)
80
-
-
... More
M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair Dining and recanning with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed.(FD-16/227/260/279)
1600
-
-
... More
All as per Sl item No.77 above, but for Chair Easy Seat only . FD-229
1500
-
-
... More
All as per Sl item No.77 above, but for Chair Easy back only. FD-229
1500
-
-
... More
All as per Sl item No. 77 above, but for Chair writing. FD-261/280
950
-
-
... More
M&L for removing unserviceable handle of Almirah small steel / Almirah lagre steel/Almirag large 1/2 hanging x 1/2 shelves steel replacing with chromium plated handle, 100 mm long, as per Godrej Pattern complete all as specified and directed. (FD-1031/1032/1033/350/351) (Note:- All furnitre repairs shall be carried out at various units / BSO yard as per the directions of Engr in charge. Quoted rate is deemed to be inclusive of all subsequent expenditure occured on carrying out repair work at various sites/locations irrespective of floor levels)
250
-
-
... More
M&L for One side leg of Almirah steel Large/small/1/2 hanging x 1/2 shelves, left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, MS sheet of 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green/smoke grey colour complete all as specified and directed ((FD-1031/1032/1033/350/351).
150
-
-
... More
M&L for 3 way locking device as per Godrej pattern, fully operational with the existing handle duly painted all as specified and as directed. (FD-1031/1032/1033/350/351)
100
-
-
... More
M&L Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern all as specified and as directed (FD-1031/1032/1033/350/351)
350
-
-
... More
M&L Steel cleats for supporting shelves suitable to existing type / model of almirah duly painted all as specified and as directed (FD-1031/1032/1033/350/351)
1000
-
-
... More
M&L replacement of old broken glass shutter of Almiarah Large steel glazed and fixed with new glass shutter of 3 mm thick all as specified and as directed (FD-104(M))
100
-
-
... More
M & L preparation of old treated steel surfaces of Almirah large with shelves and applying two coat of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. FD-67(M) 1031/351
200
-
-
... More
M & L preparation of old treated steel surfaces of Almirah medium with shelves and applying two coat of synthetic enamel paint smoke grey / olive green colour complete all as specified and as directed. FD-243/350/1032
250
-
-
... More
M & L preparation of old treated steel surfaces of Almirah large half shelf and half hanging and applying two coat of synthetic enamel paint smoke grey / olive green colour complete all as specified and as directed. FD-1033/FD/E6/MAP/18
30
-
-
... More
M & L preparation of old treated steel surfaces of Almirah large steel glazed and applying two coat of synthetic enamel paint smoke grey / olive green colour complete all as specified and as dierected. FD-104(M)
20
-
-
... More
M&L Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate of Book Case steel as per Godrej pattern all as specified and as directed (FD-1028)
150
-
-
... More
M&L removing old broken handles of Book case steel and replacing with chromium plated handle, 100 mm long all as specified and as directed (FD-1028)
250
-
-
... More
M&L replacement of old broken glass shutter of Book Case steel glazed and fixed with new glass shutter of 3 mm thick all as specified and as directed (FD-1028)
150
-
-
... More
M & L preparation of old treated steel surfaces of Book case and applying two coat of synthetic enamel paint smoke grey / olive green color all complete and as specified (FD-1028)
200
-
-
... More
M&L for removing old unserviceable Bow handle of Locker Bed side steel and replacing with new Bow handle aluminium, 100 mm long fixed to each shutter all as specified and as directed FD-257/1029.
150
-
-
... More
M&L removing old hasp & staple and replacing with new Safety type hasp & staple, chromium plated steel of size 75x40x3mm all as specified and as directed. FD-257/1029
150
-
-
... More
M&L Chromium plated steel tower bolt, 50 mm size welded to top or bottom of right shutter all as specified and as directed. FD-257/1029
150
-
-
... More
M&L Chromium plated steel conduit pipe, 20 mm dia, 1.6 mm thick, 380 mm long, fixed to existing pair of sockets on the upper portion of the left chamber al as specified and as directed. FD-257/1029
150
-
-
... More
M&L for One side leg of Locker Bedside steel left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, MS sheet of 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of locker including 2 coats of synthetic enamel paint olive green/smoke grey colour complete all as specified and directed ((FD-1029/257).
100
-
-
... More
M & L preparation of old treated steel surfaces of Locker bed side and applying two coat of synthetic enamel paint smoke grey / olive green colour complete all as specified. FD-127(M)/257/1029
150
-
-
... More
M&L for replacing old broken left or right side frame including the side front /rear leg portions and the top handle portion of Chair Verandah, with new 20 mm dia 16 Gaze steel conduit pipe of 1 mtr each shall be measured, duly welded to the seat frame and also to the 10mm dia MS rod in front. Replaced conduit frame to be given 2 coats of synthetic enemel paint (white colour) over a coat of red oxide zinc chromate primer complete to match with existing color all as specified and as directed. (FD - 256)
200
-
-
... More
M & L for Canning chair verandah with new plastic cane of size 3.0x0.60mm cane including taking out old/damaged plastic cane from chair verandah and cleaning the entire surface complete all as specified and directed (FD-256)
1600
-
-
... More
S&F new PVC shoes to bottom of legs of Chair verandah all as specified in drg and as directed (FD-256)
6400
-
-
... More
M & L preparation of old treated steel surfaces of Chair Varandah as per drawing No FD-256 and applying two coat of synthetic enamel white paint complete all as specified.
1600
-
-
... More
M&L for replacing old broken left or right side frame including the side front /rear leg portions and the top handle portion of Chair Verandah, with new 20 mm dia 16 G steel conduit pipe of 1 mtr each shall be measured, duly welded to the seat frame and also to the 10mm dia MS rod in front. Replaced conduit frame to be given 2 coats of synthetic enemel paint (white colour) over a coat of red oxide zinc chromate primer complete to match with existing color all as specified and as directed. (FD/MAP-II/15)
200
-
-
... More
M&L for removing unserviceable / broken PVC seat & back from Chair verandah and fix new PVC seat & back with 4 mm ribs on back side all as specified and as directed (FD/MAP-II/15)
1500
-
-
... More
M&L for fixing 10 mm dia MS rod below PVC seat & back each by way of welding to both side of conduit pipes 20 mm dia horizonatally for supporting PVC seat & back and provide suitable provision on seat & back to place in tact on new stiffners of Chair Verandah all as specified and as directed (FD/MAP-II/15)
1500
-
-
... More
S&F new PVC shoes to bottom of legs of Chair verandah all as specified in drg and as directed (FD/MAP-II/15 )
6000
-
-
... More
M & L preparation of old treated steel surfaces of Chair Varandah and applying two coat of synthetic enamel white paint complete all as specified. FD/MAP-II/15
1500
-
-
... More
Removal of existing damaged top of Teapoy verandah and replacing the same with new top made out of 700 x 400 mm size, 18mm thick pre laminated particle board (White finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including french polishing TW edging complete all as shown in drg and as specified. (FD/E6/MAP/17)
35
-
-
... More
M & L preparation of old treated steel surfaces of Teapoy Varandah and applying two coat of synthetic enamel paint black colour complete all as specified and directed .FD/E6/MAP/17
35
-
-
... More
S&F new PVC shoes to bottom of legs of Teapoy verandah all as specified in drg and as directed (FD/MAP-II/15 )
140
-
-
... More
Removal of existing damaged top of Teapoy verandah and replacing the same with new top made out of 900 x 450 mm size, 18mm thick pre laminated particle board (White finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including french polishing TW edging complete all as shown in drg and as specified. (FD-208/253)
40
-
-
... More
M & L preparation of old treated steel surfaces of Teapoy Varandah and applying two coat of synthetic enamel paint white colour complete all as specified and as directed. FD-208/253
40
-
-
... More
S&F new PVC shoes to bottom of legs of Teapoy verandah all as specified in drg and as directed (FD-208/253)
160
-
-
... More
M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination as in 585x300mm size writing board of Chair school with hand board including PVC edging alround, screwed to existing 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame including taking out old unserviceable writing board complete all as specified and directed (Drg No FD/E6/MAP/05)
200
-
-
... More
S & F PVC inner shoe suitable for 25mm dia MS pipe leg of Chair school complete all as specified and directed. (Drg No FD/E6/MAP/05)
400
-
-
... More
M&L for removing unserviceable broken PVC seat from Chair school with hand board and fix new one piece PVC seat & back (Blowplast or equivalent) all as specified and as directed (FD/E6/MAP/05)
100
-
-
... More
M & L preparation of old treated steel surfaces of Chair school with hand board and applying two coat of synthetic enamel black/brown paint complete all as specified. FD/E6/MAP/05
100
-
-
... More
M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as top/side/back of Table bedside with PVC edging including taking out old unserviceable board complete all as specified and directed. (Drg No FD/MAP/15(R))
400
-
-
... More
M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in front shutter of Table bedside with PVC edging fixed with MS pinao hinges including taking out old unserviceable board complete all as specified and directed. (Drg No FD/MAP/15(R))
200
-
-
... More
M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as front and sides of drawer and bottom shall be fixed with 6 mm commercial plywood of Table bedside with PVC edging alround including taking out old unserviceable board complete all as specified and directed. (Drg No FD/MAP/15(R))
200
-
-
... More
M&L for MS right angle of size 50x30x5 mm thick to fix table top of Table bedside by screwing to side shutter of Table all as directed. FD/MAP/15(R)
800
-
-
... More
S & F 50mm long, chromium plated handle suitable for Table bed side complete all as specified and as directed. (Drg No FD/MAP/15(R))
400
-
-
... More
S & F PVC shoe suitable for 25mm MS square pipe leg of Table bedside complete all as specified and directed. (Drg No FD/MAP/15(R)
800
-
-
... More
M & L preparation of old treated steel surfaces of Table Bed side steel (MAP) and apply two coat of synthetic enamel paint black colour complete all as specified and as directed. (FD/MAP/15(R))
220
-
-
... More
Removal of old broken wooden seat of Chair CBA with arms and replacing with new II class hardwood seat of size 460x380 mm duly canned with godrej pattern and teakwood shade polish shall be fixed with MS screws to frame of Chair CBA with arms all as specified and directed.(FD-75(M)
150
-
-
... More
Removal of old broken wooden back of Chair CBA with arms and replacing with new II class hardwood back of size 460x380 mm duly canned with godrej pattern and teakwood shade polish shall be fixed with MS screws to frame of Chair CBA with arms all as specified and directed. (FD-75(M)
150
-
-
... More
Removal of old broken wooden seat of Chair CBB without arms and replacing with new II class hardwood seat of size 420x380 mm duly canned with godrej pattern and teakwood shade polish shall be fixed with MS screws to frame of Chair CBB without arms (FD-75(M) all as specified and directed.
100
-
-
... More
Removal of old broken wooden back of Chair CBB without arms and replacing with new II class hardwood back of size 360x380 mm duly canned with godrej pattern and teakwood shade polish shall be fixed with MS screws to frame of Chair CBB without arms (FD-75(M) all as specified and directed.
100
-
-
... More
Removal of old broken wooden Arm rest of Chair CBA with arms and replacing with new II class hardwood arm rest with teakwood shade polish shall be fixed with MS screws to frame of Chair CBA with arms all as specified and directed.(FD-75(M)
200
-
-
... More
Removal of existing broken PVC cap on chair CBA / CBB and replacing with new PVC cap (set of two) of suitable size to back frame of Chair all as shown in drawing and as specified FD - 75(M)
200
-
-
... More
Removal of existing broken PVC / rubber shoe on chair CBA / CBB and replacing with new PVC shoe (set of four) of suitable size to bottom frame of Chair all as shown in drawing and as specified FD - 75(M)
400
-
-
... More
M & L for preparation of old treated steel surfaces of Chair CBA with arms and applying two coat of synthetic enamel paint Olive green / smoke grey complete all as specified. FD-75(M)
250
-
-
... More
M & L for preparation of old treated steel surfaces of Chair CBB without arms and applying two coat of synthetic enamel paint olive green / smoke grey complete all as specified. FD-75(M)
175
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements