Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Oct 2024
Closing Soon18 Nov 2024
Tender Amount₹ 73,30,000
Costs
EMD
₹ 1,34,950Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Special Repairs To Bldg No. P 02, P 03 And P 04 In Residential Area (age Office, B S Store And Mt Section Of Mes) At Nad Sunabeda
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_679415_1Tender No
82694Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
M&L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
1277
-
-
M&L for 3 mm thick wall care cement based putty on walls complete all as specified and directed.
1277
-
-
M&L for preparation of new plastered surface of wall with and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed
1277
-
-
M&L for rendering 5mm thick in cement mortar 1:3 on Ceiling brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
300
-
-
M&L for preparation of new plastered surfaces of ceilling and applying two coats of white wash on new surfaces complete all as specified and directed.
300
-
-
Demolition of cement concrete of any description from any position including removing the demolition material complete all as specified and directed.
78
-
-
M&L for 75mm thick, PCC 1:3:6 Type C-2 using 40mm graded aggregate as in footpath, Plinth protection etc surface finished even and smooth with using extra cement complete all as specified and directed.
240
-
-
M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof padding, roof kerbs or mud stops complete all as specified and directed.
17
-
-
M&L for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm, black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP and two coats water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed.
427
-
-
Note:-
(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect complete all as specified and directed.
-
-
-
M&L for 75 mm thick PCC type B-2, 1:4:8 as in Sub-Base (40 mm garded aggregated) complete all as specified and directed.
250
-
-
M&L for 100 mm thick PCC type B-1, 1:2:4 as in base concrete (20 mm garded aggregated) finishing cement concrete surface without using extra cement complete all as specified and directed.
250
-
-
Dismantaling of floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.
1110.66
-
-
M&L for light shade vitrified ceramic tiles 10mm thick (Square/ rectangular) polished area of each tile not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colouered cement to match incl 15mm thick screed bed in CM(1:6) complete sizing and cutting complete all as specified and directed.
470
-
-
All as per ser Item No. 16 above but as in skirting including 10mm thick backing coat of tiles in CM(1:4) complete all as specified and directed.
46.66
-
-
M&L for non skid ceramic coloured tiles area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, 7mm thick in floors, etc. set and jointed in neat cement slurry and pointed in cement to match, size of tile, complete all as specified and directed.
40
-
-
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement mortar 1:6 complete all as specified and directed.
507
-
-
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
2
-
-
M&L for joint free glazed ceramic coloured tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
64
-
-
Taking down of steel tubing 15mm dia of pipe and connections removal to store complete all as specified and directed.
54.7
-
-
Taking down of steel tubing 20mm dia of pipe and connections removal to store complete all as specified and directed.
40
-
-
Taking down of steel tubing 25mm dia of pipe and connections removal to store complete all as specified and directed.
25
-
-
S&F GI water tubing of 15mm dia, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.
49
-
-
S&F GI water tubing of 20 mm dia, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.
28
-
-
S&F GI water tubing of 25 mm dia, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.
16
-
-
Refixing old 15mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete as all specified and directed
5.7
-
-
Refixing old 20mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete as all specified and directed
12
-
-
Refixing old 25mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete as all specified and directed
9
-
-
Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and directed.
3.11
-
-
M&L for modular Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
3.11
-
-
S&F in repairs Vitreous Cliina wash basin, white, flate back, size 550x400mm white, including brackets, CP waste coupling, waste pipe 32mm dia complete all as specified and directed.
3
-
-
M&L for marble work makrana white 18 to 20 mm thick (table rubbed and polished) for wash hand basin platform including cutting fixing like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
1.68
-
-
M&L for form work to sides and soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; note exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
7.47
-
-
M&L for cement concrete Type A1 Mix 1:1.5:3 (20 mm graded stone aggregate) as in slabs supported on walls, beams and coloumns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
1.89
-
-
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
227
-
-
S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and directed.
3
-
-
S&F in repairs stop valves, 15mm dia, cast copper alloy with capstan head, chromium plated, screwed down high pressure with crutch or butterfly handle with long shank and cup (concealed type) for iron pipe etc complete all as specified and directed.
14
-
-
S&F PVC connection of 15mm bore and 450mm long with brass check nut and union etc complete all as specified and directed.
3
-
-
S&F in repairs 15 mm dia piller tap with capstan head, chromium plated screwed down high pressure, with or without lettered HOT or Cold with long screwed shanks and fly-nuts, screwed for iron pipes and fixed complete all as specified and directed.
3
-
-
S&F in repair for EWC Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed.
1
-
-
S&F in repais vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, flushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete all as specified and directed.(excluding cost of flushing cistern)
2
-
-
S&F in repairs 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia, PVC connection 600mm long of dia 15mm complete all as specified and directed.
3
-
-
S&F in repairs Viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe to flushing cistern complete all as specified and directed.
3
-
-
S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
3
-
-
S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
1
-
-
S&F in repairs tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete all as specified and directed.
3
-
-
S&F in repairs 15mm bore CP Bip taps, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule including taking down old one of any pattern and fixed in repair complete all as specified and directed.
6
-
-
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each including taking out of holdfast & making in CM (1:4) complete all as specified and directed.
11
-
-
Taking down chowkats or frame with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each including taking out of holdfast & making in CM (1:4) complete all as specified and directed.
9
-
-
Taking down shutters of any description n. exc. 1 sqm each complete all as specified and directed.
17
-
-
S&F second class hard wood plain, solid straight factory made chowkats or frames wrought framed, rebated on silid rounded or chamfered put together with glue pinned incl tarring back of chowkat/frame complete all as specified and directed.
0.59
-
-
S &F 35 mm thick, factory made second class hard wood rail and style plain framed panelled shutter (any number of panel) with lock rail and panel of 9mm B.W.P.commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and directed.
23.59
-
-
S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.
12
-
-
S&F 1st class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided in to squares with plain chamfered or rounded mitred and rebated sash bars any numbers edges of framing plain, windows, ventilators, etc. Chamfered complete all as specified and directed.
8.5
-
-
S&F anodised aluminium powder coating (thickness of powder coating not less than 50 micron) frame for doors, windows ventilators, and aluminium partition with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
61
-
-
S&F anodised aluminium powder coating (thickness of powder coating not less than 50 micron) doors shutters aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 nos in each door, hinges windows ventilators with one or more rebates including joining cleat for fixing with locking arrengments etc complete all as specified and directed.
2.34
-
-
S&F aluminium anodised powder coating (thickness of powder coating not less than 50 micron) windows and ventilater shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinges, 2 nos of handles, Peg Stays 150mm Long, locking arregements, Stoppers etc complete all as specified and directed.
4.26
-
-
S&F 6mm thick Heat absorbing glass sheet ordinary quality, in any size including fixing to aluminium doors/window and frames complete all as specified and directed.
2.79
-
-
S&F 150mm Hasp and staple aluminium anodised, saftey type, with mild steel hinge pin including bolt to hinge plate and fixed with scrwes complete all as specified and directed.
2
-
-
S&F 150mm size aluminium anodised, barel tower bolt of extruded section complete all as specified and directed.
8
-
-
S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steeel springs, fixed in floor complete all as specified and directed.
16
-
-
S&F Aluminium (extruded section) door closer hydraulically regulated, designation No, 2, universal type, suitable for door shutters of 701 to 850mm in widh and of weight between 36 to 60 Kg and fixed complete all as specified and directed.
16
-
-
M&L in repairs 18/19mm thick veneered particle board solid core interior grade with decorative face veneers on one face fixed with screws to frame work as in pelmet boxes, etc complete all as specified and directed.
8.1
-
-
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strick inside complete all as specified and directed.
7.47
-
-
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube, in opening as per specification and drawing incl making good the disturbed surface to match the existing for toilet complete all as specified and directed.
26.16
-
-
S&F butt hinges 125 mm size medium weight cold rolled mild steel complete all as specified and directed.
18
-
-
S&F butt hinges 75mm size medium weight cold rolled mild steel complete all as specified and directed.
6
-
-
S&F in repair continuous (piano) hinges MS bright finish or galvanised width of flaps when open 40mm complete all as specified and directed.
16
-
-
M&L for 150 mm long extruded aluminium handles fabricated type complete all as specified and directed.
22
-
-
M&L for 100 mm long extruded aluminium handles fabricated type complete all as specified and directed.
52
-
-
S&F 200mm size aluminium anodised, barel tower bolt of extruded section complete all as specified and directed.
36
-
-
All as per ser item No. 74 above item but 150mm size complete all as specified and directed.
18
-
-
S&F sheet glass ordinary quality 4 mm thick and glazing with oil putty or wooden beads in square n exc 0.5sqm in each panel complete all as specified and directed (beads will be measured and paid under separate item).
7.27
-
-
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.
6.32
-
-
S&F curtain rod of 18mm dia MS, CP with fixing brackets, stops, rollers etc as fixed in repairs complete all as specified and directed.
40.7
-
-
S&F MS helical door spring 300mm long of ISI marked including roller and roller plate fixed as in repairs complete all as specified and directed.
6
-
-
S&F in repairs Steel rolling shutter 1.25mm thick, but gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position complete all as specified and directed.
15
-
-
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and directed.
3
-
-
Material and Labour for cement concrete B1 1:2:4(20 mm graded stone aggregate) quality concrete using 20mm graded stone aggregate as in slabs supported on walls, beams and coloumns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
0.3
-
-
M&L cement concrete ( Nominal mix) in type B1 1:2:4 ( 20 mm graded aggregate) Chajjas and the like in patch work complete all as specified and directed.
2.4
-
-
M&L for form work to sides and soffits of floor or beams etc complete all as specified and directed.
35
-
-
Dismantling of structural steel work including doors, gates etc but excluding framed strusses complete all as specified and directed.
0.27
-
-
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
230
-
-
M&L for PCC 1:3:6 type C1 using 20mm graded aggreagate in CM 1:6 as in bed blocks and hold fasts complete all as specified and directed.
0.22
-
-
M&L for mild steel for hold fast, wall ties similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
10
-
-
M&L for preparation of old wooden Surfaces and applying one coat of synthetic enamel paint of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.
14.49
-
-
M&L for preparation of new wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
63.17
-
-
M&L for applying two coat of synthetic enamel paint on new steel surface over a cat of red oxide incle preparation of surface of any description over 10 cm width or girth complete all as specified and directed.
70.94
-
-
M&L for applying one coat of synthetic enamel paint to old Steel surface incl preparation of surface of any description over 10 cm width or girth complete all as specified and directed.
148.5
-
-
S&F steel tubular work including special shaped washer, nut bolt etc and butt welded to tubes complete all as specified and directed.
500
-
-
S&F plates(plain or chequered) square cut or notched (ordinary or counter sunk) forming holes, without any attachment confirming to Gde Fe-410-W Gde E-250) quality B complete all as specified and directed.
100
-
-
M&L for applying synthetic enamel paint over red oxide on steel surfaces of any description n exc 10cm in width or girth when unconnected with other painting or when painted in diffrent unit complete all as specified and directed.
30.6
-
-
Dismantling water tanks of capacity exc 250 and not exc 500 ltr and removing to store and S&F water storage tank of 500 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. Note:- Make of tank shall be engraved on the tank complete as all specified and directed.
3
-
-
S&F 20mm dia ball valve high pressure PTMT with epoxy coated aluminium rod & high pressure plastic ball scrwed for iron pipe and fixed complete all as specified and directed.
4
-
-
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed wit h grey cement slurrry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bedding in CM 1:4 complete all as specified and directed.
345
-
-
Dismantling of AC corrugated or semi-corrigated sheeting, roof covering complete all as specified and directed.
367.15
-
-
M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified with J-type, L-type or cranked hook bolts in roof including necessary ridge complete all as specified and directed.
342.15
-
-
S&F prepainted galvatume aluminium zinc coating GI based plain steel steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed.
25
-
-
Surface excavation n.exc. 30 CM deep, averaging 15 CM deep and getting out in soft/loose soil, complete all as specified and directed.
51
-
-
M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm graded mechanically crushed stone as in sub base of floor / hard standing finished, complete all as specified and directed.
51
-
-
Material and labour for sand over PCC for cushioning of paver blocks, complete all as specified and directed .
2.55
-
-
M&L for providing and laying of precast PCC solid concrete block, Grade - C confirming to IS 2185 (Part-I) 2005 of 45 cm high, 10 cm thick and of suitable width including chamfers, weatherings, throating etc as in kerb continuous edging jointed in cement mortar 1:4 and struck flush pointing as the work proceeds and finishing with neat cement flush joint, complete all as specified and directed.
1.53
-
-
M&L for PVC moulded, with grey cement and pigment, glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, complete all as specified and directed.
51
-
-
Dismantling water tanks of capacity exc 500 and not exc 1000 ltr and removing to store and S&F water storage tank of 1000 ltr capacity, HDPE double layer, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.
1
-
-
Supply only integral waterproofing compound
400
-
-
Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc . Removing materials matrials to stores for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors complete all as specified and directed.
243
-
-
M&L for point wiring with PVC insulated, PVC unsheathed FRLS cable, single core, stranded, copper conductor cable 1.5 sqmm size, drawn in and including Non metallic rigid PVC conduit 20mm dia with all accessories concealed type and including PVC unsheathed FRLS cable, 1.5 sqmm stranded copper cable (green insulation) for continuous earth wire and including pressed steel concealed terminal boxes of required size of 2 mm thick, covered with 3 mm thick plastic laminated bakalite sheet, ISI marked for the following :-
-
-
-
One light point or fan/Exhaust Fan point controlled by one switch
167
-
-
One point for socket outlet 5 amp same board
35
-
-
One 3 pin socket outlet, 5 amps, independent
13
-
-
One 3 pin socket outlet, 15 amps. Independent, with cables 2.5 Sqmm size copper conductor cable with continuous earth wire of 1.5 sqmm copper conductor on independent board.
28
-
-
S&F metal flush box 8 module complete all as specified and directed.
34
-
-
S&F metal flush box 4 module complete all as specified and directed.
28
-
-
S&F metal flush box 3 module complete all as specified and directed.
48
-
-
S&F metal flush box 2 module complete all as specified and directed.
10
-
-
S&F modular cover plate with frame 8 Module complete all as specified and directed.
34
-
-
S&F modular cover plate with frame 4 Module complete all as specified and directed.
28
-
-
S&F modular cover plate with frame 3 Module complete all as specified and directed.
48
-
-
S&F modular cover plate with frame 2 Module complete all as specified and directed.
10
-
-
S&F modular switch 6 amps Single module complete all as specified and directed.
215
-
-
S&F modular switch 16 amps Single module complete all as specified and directed.
28
-
-
S&F modular socket 6 amps 5 pin socket Single Module complete all as specified and directed.
48
-
-
S&F modular socket 6/16 amp 3 pin combined Single Module complete all as specified and directed.
28
-
-
S&F modular fan regulator 2 Module complete all as specified and directed.
23
-
-
S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body for surface type, bakelite 65x50mm three terminal complete all as specified and directed.
157
-
-
S&F lamp holder (angular) insulated body with back plate suitable for batten fittings complete all as specified and directed.
10
-
-
S&F energy efficient light emmitting fluorescent light fitting 1x20 watt, four feet, white fittings with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as specified and directed.
Make: Cat part No - LHEXBLP7PN1W020 of Havells or equivalent in Philips/Comtrons/Surya /approved makes
86
-
-
S&F energy efficient light emmitting fluorescent light fitting 1x10 watt Two feet LED tube light with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as specified and directed.
3
-
-
S&F LED bulb 9W, B22 holder based Cool Daylight lamp with polycarbonate body and aluminium heat sink with warm white complete all as specified and directed.
10
-
-
Taking down Existing old unserviceable Fans of any make and size/any condition, dismantling blades and removing fan and depositing to store complete all as specified and directed.
28
-
-
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
23
-
-
S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed.
3
-
-
S&F exhaust fan, steel body AC single Phase, 230V of size 450mm sweep with blades and frame and louvers complete all as specified and directed
2
-
-
S&F Building security light LED street light fitting 60watt, made up of pressure die cast aluminum housing with high power LEDs with secondary optics, IP66 protection, Orion Neo LED street light with poly carbonate cover including GI Bracket made out of 40 mm dia medium grade GI tube up to 1.5 m long bend to shape 115 degree off set shape, fixed with 2 nos of suitable MS Flat clame of size 40x6 mm with necessary nut bolts & washers and applying two coats of aluminum enameled paint over one coat of zinc oxide primer for clamp complete all as specified and directed. Make: Bajaj Cat No ENXT P 72L WH PO PC SD or Equivalent in Compton/ Philips /Havells/approved makes
40
-
-
M&L in repair for two single core (submain) PVC insulated FRLS cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated FRLS cable 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit including all conduit and fixing accessories, concealed in wall including cutting chases and making good disturbed surface to match complete all as specified and directed.
149
-
-
M&L for Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 5 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.
6
-
-
S&F in repair MCB DB, TPN, 4 Way, 415 Volts, sheet steel phospetised powder coated, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar 415V nautral link suitable for mounting MCBs, IP:43 protection complete all as specified and directed
3
-
-
S&F in repair MCB DB double door, IP 43 protection single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar 240V natural link complete all as specified and directed.
8
-
-
S&F in repair MCB DB double door, IP 43 protection single pole and neutral 4 way sheet steel phospetised powder painted with 200 amps rated bus bar 240V natural link complete all as specified and directed.
3
-
-
S&F MCB SPN 32 Amps, 10 KA rating, complete all as specified and directed
11
-
-
S&F MCB TPN 40 Amps, 10 KA rating complete all as specified and directed
3
-
-
S&F MCB SP 6 to 32 Amps, 10 KA rating complete all as specified and directed
68
-
-
Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m and getting out in soft/loose soil complete all as specified and directed.
31
-
-
Returning, filling in, incl. spreading, levelling, watering and well ramming in layers not exc 25 cm in depth in soil complete all as specified and directed.
27
-
-
Removing excavated material to a distance not exc 50 m and depositing where directed.
4
-
-
S&F GI pipe medium grade of 50 mm with all fittings, laid in trenches, complete all as specified and directed.
80
-
-
S&F GI pipe medium grade of 20 mm with all fittings, laid in trenches, complete all as specified and directed.
50
-
-
S&F Gun metal gate valve of size 50 mm complete all as specified and directed.
1
-
-
S&F Gun metal gate valve of size 20 mm complete all as specified and directed.
6
-
-
Cutting existing pipe line for alterations or additions necessarily done in position without taking down and inserting Tee of 80x80x50mm for tapping complete all as specified and directed.
1
-
-
Cutting existing road for laying of GI pipe and re-filling with PCC Type B2 1:2:4 (40 mm graded aggregate) in surfaces complete all as specified and directed.
18
-
-
M&L for valve chamber of internal size 750x750x750mm comprising of 50mm thick PCC 1:5:10 type E2 foundation, 200mm thick brick wall in CM 1:6, 15mm thick plastering in CM 1:4 internally and externally up to 50mm below GL, 100mm thick PCC 1:3:6 type B1 as in copings, 3mm thick MS sheet cover with suitable hinges and locking arrangement, painting steel surfaces with two coats of synthetic enamel paint over a coat of primerincluding necessary earth work and excavation in any type of soil complete all as specified and directed.
1
-
-
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core with suitable lugs complete all as specified and directed.
80
-
-
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4core with suitable lugs complete all as specified and directed.
35
-
-
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core with suitable lugs complete all as specified and directed.
150
-
-
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for taking out/laying cable and getting out, in Hard / Dense Soil complete all as specified and directed.
64
-
-
Returning, filling including spreading leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.
29.5
-
-
Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
34.5
-
-
Supply spreading in trenches fine dry crushed stone sand for cable protection and punning down gently by hand complete all as specified and directed.
26.5
-
-
Supply and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.
1422
-
-
Cutting existing road and laying of GI pipe and filling with PCC Type B2 1:2:4 (40 mm graded aggregate)in surfaces complete all as specified and directed.
18
-
-
Supply and laying GI pipe 50 mm dia Light gade with all fittings laid in floors/on walls/road cutting for cable protection complete all as specified and directed.
18
-
-
Supply, install, test and commissioning of factory made LT Panel board (Distribution Panel) made out of CRCA sheet 3.15 mm thick outdoor type, double door Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, cable connector for connecting multi cables located in cable chamber terminated form the switchergear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 tinned copper bus bar with insulators suitable for three phase and neutral of capacity 200Amp, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:
1
-
-
Incoming:
a) MCB TPN AC 3 Phase 415 V, 50Hz 4 pole 63 A capactiy - 01 No. Outgoing:
b) MCB TPN AC 3 Phase 415 V, 50Hz 4 pole 40 A capactiy - 04 No. (For 03 Bldgs & 01 spare)
c) MCB SPN AC singlePhase 230 V, 50Hz 40 A capactiy - 02No. (For 01 Bldg & 01 spare)
d) Intelligent Panel meter to measure voltage, current with all connected CTs e) LED indicating lamps with colour Red, Yellow, Blue - 01 Set
-
-
-
M&L for Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected togalvanised earth lead Strip 32x6 mm and GI pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 5 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%