Military Engineer Services Tender

All as per Sl item No. 3.00 but cross sectional area 25 Sqmm x 4 Core

All as per Sl item No. 3.00 but cross sectional area 50Sqmm x 3.5 Core

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick as in soil complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply & laying sub class 'B', class designation 75 bricks of old size, laid along alignment of cable as protection to cable in trenches including taking out old bricks complete all as specified and directed.

S&F steel tubular swaged poles conforming to IS-2713, complete with cast iron base plate, finial taper plug, bolts, nuts & screws, type 410 SP-31 (9 m long) and including painting with two coat of aluminium paint over a coat of primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and painting with 03 Nos of black colour strip and 02 Nos of yellow colour strip of 30 cm height each alternatively from top of plinth block and numbering of poles including taking down existing poles complete all as specified and directed. Note:- Excavation, earth work and PCC work will be measured and paid for separately under respective items. Make of Pole:- Calcutta Poles & Tubes / Skipper Limited / Jindal Steel / National tubing Co / Bombay tube & Store Make of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd

M & L for PCC 1:3:6, Type C-1, using 20 mm graded stone aggregate as in mud stops and the like including weathering, slightly rounded or chamfered angles and throating including [straight or curved] complete all as specified and directed.

M&L cement concrete 1:2:4 type B0, (using 12.5 mm graded crushed stone aggregate) as in copings, benching and the like etc. including necessary formwork & demolition of old concrete complete all as specified and directed.

Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 100 mm bore at a depth 0.6 m to 0.75 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m and filling the space with PCC B0(1:2:4)(using 12.5 mm graded stone aggregates) complete all as specified and as directed. Note:- GI Pipe shall be measured and paid separately.

S&F in repairs 50 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection including taking down complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

S&F in repairs for cable route indicator for LT UG cable, 1100 Volt grade made out of 4mm thick MS sheet in round shape of dia not less than 200mm, embossed with LT Cable on it, bolted with 2 nut of suitable size at top of 40 x 6 mm MS flat iron of length not less than 1 meter, complete metal surfaces painted with 2 coats of synthetic enamel paint over a coat of primer & bottom of flat iron embedded in PCC 1:3:6 type C2 of size 200mm x 200mm x 500mm (400mm below ground level and 100mm above ground level), exposed surface of concrete painted with 3 coats of white wash including necessary earth work complete all as specified and directed.

Taking down existing loop in loop out junction box, disconnecting the cable connections and refixing the same loop in loop out junction box with new cable connections including providing new set of aluminium lugs / thimbles of size 10 to 35 sqmm (as reqd) for 3.5/4 core existing LT cabe of any type, necessary insulation with tape, clamps for fixing of cables, fittings and fixtures, nut bolts etc complete all as specified and directed.

M&L for disconnecting electrical connection of defective / burnt out UG LT cable of any size 2 to 4 core from main switch / DB / Junction boxe / LT Panels, excavating, taking out the required length of existing cable from loop, cutting the defective portion of cable old termination at end, providing new aluminium thimbles / lugs of suitable size and reconnecting the same with existing location and refilling of cable trench with existing sand and bricks Note :- The rate quoted shall include for necessary earth work

M&L preparation of old painted surface of existing 9 m long old steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint over one coat of primer on complete height of the pole and painting with 03 Nos of black colour strip and 02 Nos of yellow colour strip of 30 cm height each alternatively, writing pole details & applying one coat of white wash on pole coping complete all as specified and directed. Make of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd

S&F in repairs isolated electronic LED driver powered by inbuilt (SMPS based constant current supply) of make as per existing, suitable for 120 to 200 W LED street light / flood light / post top lantern / bollard lights site selectable with lower THD, output open / short circuit protenction, phase to phase protection, over voltage protection, surge voltage protection complete all as specified and directed. Note:-The rate quoted is not inclusive of taking down & refixing of street light fittings and the same shall be measured and paid separately under relevant item.

All as per serial Item No. 20.00 above but suitable for 10 to 100 W

S&F in repairs only surge protection device of capacity 10 KV & make as per existing, suitable for street light / flood light / post top lantern complete all as specified and directed. Note:-The rate quoted is not inclusive of taking down & refixing of street light fittings and the same shall be measured and paid separately under relevant item.

M&L in repair pitted wiring from LED panel to driver for capacity 120 to 200 W LED light fittings,complete all specified and directed by Engineer-in-Charge.

All as per Sl item No. 23.00 but for 45-100 W LED fittings

S&F in repairs 18 KW, three phase Nature Switch (using Infrared Sensor technology) based automatic street light timer switch for automatic switching on / off street light based on lux level of nature light (Required Illuminance Level for Switching ON is ≤ 60 Lux and for Switching OFF ≥ 10 Lux). The Sensor should also have part night operation facility of min. 4 hrs to max 12 hrs, consisting of sensor, overload protection fuse gear, 3 Nos contactor, 3 nos Incoming MCBs & 3 nos. Outgoing MCBs of 32-40 Amps each and Circuit wiring (Copper) of min.10 sqmm, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, Electric shock proof, termite proof thermoplastic polycarbonate Enclosure (with HINGED LID) conforming to IP66 protection class 2 , complete all as specified and as directed. Make:- Havells / GE / Kakatiya energy system Pvt Ltd / Indo Asian

S&F in repair weather proof cable junction box of size not less than 225 mm x 295 mm x 122 mm with terminals, IP 66 (minimum), suitable for outdoor installation, suitable for 10 to 25 sqmm cable, including 01 No 5/6 Amp SP MCB, 50 Amp rated 4 pole connector, fixing arrangement with MS flat of size 25 x 3 mm with necessary nuts, bolt and washers complete all as specified and directed. Note :- (a)The rate of M&L for MS clamps, nuts, bolts, washers etc. are deemed to be included in the unit rate quoted against this item. (b) Unit rate quoted against this item shall also include connection between existing incoming LT cable lines to new junction box . Make :- Hensel / Sintex Industries Ltd. / C&S electric Ltd. / National

S&F in repair connector 100 A, 4 way for junction box complete all as specified and as directed

S&F in repair 3 pole contactor AC3, upto 63 A complete all as specified and as directed

Dismantling motor set of 2 HP capacity and disconnecting electric connection removing shaft from impeller and remantling, grinding, polishing to shaft & suction cover and replacing, Gun metal bushes for shaft, Key for shaft, Graphite packing, Gland bush, coupler etc fixing gland rope, greasing and fixing same shaft and impeller and reassembling properly, re-installing in same position complete all as specified and as directed.

M&L for dismantling defective induction motor of 2 HP capacity & any make, 415 V, of any duty or any class of insulation from the bed duly coupled with pump, transporting to work shop, removing burnt out winding from stator, rotor and re-winding the same with existing gauge super enameled copper wire of approved make and supply & replacing driven end and non driven end bearings, insulation materials, varnishing, heating, reassembling, testing and commissioning complete all as specified and directed. Notes :- Motor removed for rewinding shall be overhauled completely and quoted rate shall be deemed to be inclusive for the same.

Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Light Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed.

S&F MCCB 4 pole 40 to 63, breaking capacity 16 kA, Ics = 100% Icu, thermal megnatic release type with adjustable overload setting (0.8-1.0 ln), adjustable short circuit setting (6-10 lr) including necessary modification in the panel & taking down existing MCCB complete all as specified and as directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian / HPL

S&F MCCB 4 pole 250 Amp, breaking capacity 36 kA, Ics = 100% Icu, microprocessor release type with adjustable overload setting (0.4-1.0 ln), adjustable short circuit setting (1.5-10 lr) including necessary modification in the panel & taking down existing MCCB complete all as specified and as directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian / HPL

S&F in repairs LED street light fitting of capacity not less than 60 watt, IP-65 (minimum), integrated type with high efficiency electronic driver, SPD of capaciity 10 KV, pressure die cast aluminium housing with toughened glass cover, internally prewired and including electrically connecting existing street light fitting complete all as specified and as directed. Make:- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj / Gold Medal Note:- Supply of new GI Pipe bracket if required shall be measured and paid seperately under relevant item.

All as per serial Item No. 34.00 above but LED street light fitting of capacity not less than 90 W

S&F in repairs LED flood light fitting of capacity not less than 120 watt, IP-65 (minimum) with luminous efficacy 100 Lumen/watt (minimum), SPD of capaciity 10 KV, pressure die cast aluminium housing, toughened glass cover, internally prewired and including electrically connecting & all other necessary fixing accessories such as 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers including painting to clamps with two coat of aluminium paint over a coat of red oxide primer old unserviceable flood light fittings from any position at a height exceeding 7.5 m complete all as specified and directed. Make:- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj / Gold Medal

All as per serial Item No. 36.00 above but LED flood light fitting of capacity not less than 200 Watt

M&L in repair for bracket suitable for street light made out of GI pipe light grade of 32-40 mm bore & 1.20 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed. Make of Pipe :- Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

S&F in repair LED bollard light fitting, inverted Pyramid Tripod type capacity not less than 10 W IP-65, including hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting complete all as specified and directed. Make:- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj / Gold Medal

S&F in repairs LED Outdoor New generation post top lantern capacity not less than 35 W with polycarbonate opal diffuser, pressure die cast aluminium housing, IP-65 (minimum), high efficient constant current electronic driver including electrically connecting complete all as specified and directed. Make :- Signify Innovations India Ltd (Formerly Phillips) / Havells / Crompton / Bajaj / Gold Medal