Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Furnitures and Fixtures
Eprocure
Opening Date18 Jan 2024
Closing Date15 Feb 2024
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_638093_1Bid Award Id
ViewTender No
C/8276/23-24/E8 / Token 104 of 2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M & L for replacement of Aluminium anodised handle of size 100mm long fixed with internal metal screws to various type furniture articles complete all as specified, shown on drawing and as directed.
61
-
-
... More
M & L for repair to ALMIRAH MEDIUM WITH SHELF(WOODEN) by taking down/removing the existing broken /unserviceable Shelf (910x410X20) mm carefully and supply and fixing new Shelf of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. FD-110/DB-3050)
8
-
-
... More
M & L for repair to ALMIRAH MEDIUM WITH SHELF(WOODEN) by taking down/removing the existing broken /unserviceable wooden partition size (1500x410X20) mm carefully and supply and fixing new partition of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. FD-110/DB-3050)
6
-
-
... More
M & L for repair to ALMIRAH MEDIUM WITH SHELF(WOODEN) by taking down/removing the existing broken /unserviceable wooden base frame size (1015x450X20) mm carefully and supply and fixing new base frame of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No.FD-110/DB-3050)
5
-
-
... More
M & L for repair to ALMIRAH LARGE 1/2 H x1/2 S (WOODEN) by taking down/removing the existing broken /unserviceable Shelf (450x410X20) mm carefully and supply and fixing new Shelf of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. DB-3951)
8
-
-
... More
M & L for repair to ALMIRAH LARGE 1/2 H x1/2 S (WOODEN) by taking down/removing the existing broken /unserviceable wooden partition size (1800x410X20) mm carefully and supply and fixing new partition of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. DB-3951)
4
-
-
... More
M & L for repair to ALMIRAH LARGE 1/2 H x1/2 S (WOODEN) by taking down/removing the existing broken /unserviceable wooden base frame size (1000x450X20) mm carefully and supply and fixing new base frame of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. DB-3951)
6
-
-
... More
M & L for repair to ALMIRAH MEDIUM 1/2 H x1/2 S (WOODEN) by taking down/removing the existing broken /unserviceable Shelf (450x410X20) mm carefully and supply and fixing new Shelf of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. DB-3952/FD-108)
5
-
-
... More
M & L for repair to ALMIRAH LARGE 1/2 H x1/2 S (WOODEN) by taking down/removing the existing broken /unserviceable wooden partition size (1500x410X20) mm carefully and supply and fixing new partition of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. DB-3952/FD-108))
4
-
-
... More
M & L for repair to ALMIRAH LARGE 1/2 H x1/2 S (WOODEN) by taking down/removing the existing broken /unserviceable wooden base frame size (1015x450X20) mm carefully and supply and fixing new base frame of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. DB-3952/FD-108)
5
-
-
... More
M & L for repair to RACK STEEL 4 TIER (2 UNITS) by taking down/removing the existing broken /unserviceable Shelf carefully by removing the rivets and welding spot without disturbing the adjoining parts Supply and fixing of new shelf made of 1.25 mm thick MS sheet of size 760X915 mm duly fixed to almirah large steel including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
... More
M & L for repair to RACK STEEL 4 TIER (2 UNITS) by taking down/removing the existing broken /unserviceable GI nuts & bolts carefully without disturbing the adjoining parts Supply and fixing of new GI nuts & bolts of same size and shape duly fixed to rackcomplete all as specified, shown on drawing and as directed. (Drg No. FD-129)
30
-
-
... More
M & L for repair to RACK STEEL 4 TIER (2 UNITS) by taking down/removing the existing broken /unserviceable Angular frame carefully by cutting the welded ends with hand held machine and supply and fixing new Angular frame made out of Angle Iron 30x30x3mm thick of length 1905mm by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129) (Note: Finishing coat of paint shall be measured and paid seperately)
18
-
-
... More
M & L for repair to RACK STEEL 4 TIER (2 UNITS) by taking down/removing the existing broken /unserviceable Side sheet carefully by cutting the welded ends with hand held machine and supply and fixing new Side sheet made out of 1mm thick Mild steel sheet of size 305x315mm fitted to angular frame by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
... More
M & L for repair to RACK STEEL 4 TIER (2 UNITS) by taking down/removing the existing broken /unserviceable Back sheet carefully by cutting the welded ends with hand held machine and supply and fixing new Back sheet made out of 1mm thick Mild steel sheet size 915x315mm fitted to angular frame by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129) (Note: Finishing coat of paint shall be measured and paid seperately)
10
-
-
... More
S & F in repair hard PVC shoe cap of best quality as per the existing size and specifications, fixed to various type of steel furniture articles complete all as specified and directed.
700
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE/ SMALL by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining parts Supply and fixing of new 6 lever lock (Size 75x50 mm), brass with duplicate keys complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
50
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE/ SMALL by taking down/removing the existing broken /unserviceable 3 way assembly from shutter carefully without disturbing the adjoining parts Supply and fixing of new 3 way assembly with 6 mm dia round bar including necessary fittings complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
15
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE/ SMALL by taking down/removing the existing broken /unserviceable handle from shutter carefully without disturbing the adjoining parts Supply and fixing of new 120 mm long Godrej pattern handle of approved quality complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
75
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE/ SMALL by taking down/removing the existing broken /unserviceable bush from 3 way locking device . Supply and fixing of new brss bush as per existing complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
18
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE/ SMALL by taking down/removing the existing broken /rusted bottom sheet of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new bottom of size (920x465 mm) made of 1mm thick MS sheet and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-104) (Note: Finishing coat of paint shall be measured and paid seperately)
35
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE by taking down/removing the existing broken /unserviceable Leg carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 465(L)x100(H)x120(W) mm fixed to almirah steel to the existing place through welding and riveting and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by spraying complete all as specified, shown on drawing and as directed. (Drg No. 104)
30
-
-
... More
M & L for repair to ALMIRAH STEEL SMALL by taking down/removing the existing broken /unserviceable Leg carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 440(L)x100(H)x100(W) mm fixed to almirah steel to the existing place through welding and riveting and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by spraying complete all as specified, shown on drawing and as directed. (Drg No. 104)
40
-
-
... More
S & F in repair mild steel Hinge or U clip 70/75mm long duly welded to various type of furniture articles complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
195
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE by taking down/removing the existing broken /unserviceable Shelf from almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Shelf made of 1mm thick MS sheet of size 920x465mm and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-104) (Note: Finishing coat of paint shall be measured and paid seperately)
18
-
-
... More
M & L for repair to ALMIRAH STEEL SMALL by taking down/removing the existing broken /unserviceable Shelf from almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Shelf made of 1mm thick MS sheet of size 765x 440mm and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-104) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
... More
M & L for repair to ALMIRAH STEEL LARGE by taking down/removing the existing broken /unserviceable glass carefully from shutter without disturbing the adjoining parts Supply and fixing of new glass sheet, 5mm thick of size 920x400mm duly fixed to existing MS frame complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
20
-
-
... More
M & L for repair to ALMIRAH STEEL SMALL by taking down/removing the existing broken /unserviceable glass carefully from shutter without disturbing the adjoining parts Supply and fixing of new glass sheet, 5mm thick of size 625x375 mm duly fixed to existing MS frame complete all as specified, shown on drawing and as directed. (Drg No. FD-104)
18
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining parts Supply and fixing of new 6 lever lock (Size 75x50 mm), brass with duplicate keys complete all as specified, shown on drawing and as directed. (Drg No. FD-243)
55
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /unserviceable 3 way assembly from shutter carefully without disturbing the adjoining parts Supply and fixing of new 3 way assembly with 6 mm dia round bar including necessary fittings complete all as specified, shown on drawing and as directed. (Drg No. FD-243)
10
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /unserviceable handle from shutter carefully without disturbing the adjoining parts Supply and fixing of new 120 mm long Godrej pattern handle of approved quality complete all as specified, shown on drawing and as directed. (Drg No. FD-243)
55
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /unserviceable bush from 3 way locking device . Supply and fixing of new brss bush as per existing complete all as specified, shown on drawing and as directed. (Drg No. FD-243)
10
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /rusted bottom sheet of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new bottom of size (765x440 mm) made of 1mm thick MS sheet and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-243) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /unserviceable Leg carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 440(L)x100(H)x100(W) mm fixed to almirah steel to the existing place through welding and riveting and applying one coat of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by spraying complete all as specified, shown on drawing and as directed. (Drg No. 243)
35
-
-
... More
M & L for repair to ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF by taking down/removing the existing broken /unserviceable Shelf from almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Shelf made of 1mm thick MS sheet of size 440x765mm and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-243) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
... More
Supply and fixing in repair MS L-clamp made to shape 30x30x3 mm size and fixing with SS screws to join adjustable shelf and angular channel inside Almirah complete all as specified, shown on drawing and as directed.
75
-
-
... More
M & L for repair to CHAIR CB STEEL WITH HAND REST taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape of required height by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-120) (Note: Finishing coat of paint shall be measured and paid seperately)
105
-
-
... More
M & L for repair to CHAIR CB STEEL WITH HAND REST by taking down the existing broken /unserviceable hand rest and supply and fixing of new hand rest of size 300x300x20mm made out of 1st class teak wood fixed with piano hinges complete all as specified, shown on drawing and as directed. (Drg No. FD-120)
50
-
-
... More
M & L for repair to various type steel furniture articles by running welding at damaged joints of legs/stiffner etc n.exc 6mm thick of metal to be welded complete all as shown on drawing, as specified and directed.
155
-
-
... More
M & L for repair to CHAIR CB STEEL WITH HAND REST by taking down the existing broken /unserviceable hand rest and supply and fixing of new hand rest of size 255x50x20mm made out of 1st class teak wood fixed including french polishing complete all as specified, shown on drawing and as directed. (Drg No. FD-120)
100
-
-
... More
M & L for repair to CHAIR CB STEEL WITH HAND REST by taking down/removing the existing broken /unserviceable cane plastic from seat/back and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-120)
(Note: The caning of chairs shall be carried only after finishing with painting all as required at site.)
250
-
-
... More
M & L for repair to TABLE OFFICE STEEL OFFICER /CLERK/ SUBORDINATE by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1199 mmx 590mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no T-8 / T-101 or T-111)
75
-
-
... More
M & L for repair to TABLE OFFICE STEEL OFFICER /CLERK/ SUBORDINATE by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1365 mmx 680 mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no T-9 or T-102)
55
-
-
... More
M & L for repair to TABLE OFFICE STEEL by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1665 mmx 900 mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no T-104)
45
-
-
... More
M & L for repair to TABLE OFFICE STEEL OFFICER /CLERK/ SUBORDINATE by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 900mmx 590 mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no T-31/T-32)
65
-
-
... More
M & L for repair to TABLE OFFICE STEEL OFFICER /CLERK/ SUBORDINATE by taking down/removing the existing broken /unserviceable Lock carefully without disturbing the adjoining parts Supply and fixing of new 4 lever lock, brass with duplicate keys complete all as specified, shown on drawing and as directed. ((Drg No. TP Godrej Model no T-8/T-9/T-101/T-102/T-104/T-111/T-31/T-32)
55
-
-
... More
M & L for replacement of recessed PVC handle fixed with internal metal screws to various type furniture articles complete all as specified, shown on drawing and as directed.
250
-
-
... More
M & L for repair to TABLE FOR HAVs AND ORs by taking down/removing the existing broken /unserviceable wooden legs of size (60x60) mm at top, (30x30) mm at bottom and 760 mm long carefully and supply and fixing new legs of size as per the existing one made out of 1st class teak wood as per drg complete all as specified and directed. (Drg No. FD-223)
25
-
-
... More
M & L for repair to TABLE FOR HAVs AND ORs by taking down the existing broken /unserviceable Top Rail (long) and supply and fixing of new Top Rail (long) of size 900x65x25mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-223)
30
-
-
... More
M & L for repair to TABLE FOR HAVs AND ORs by taking down the existing broken /unserviceable Top Rail(Short) and supply and fixing of new Top Rail (short) of size 600x65x25mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-223)
25
-
-
... More
M & L for repair to TABLE FOR HAVs AND ORs by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 900mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-223)
75
-
-
... More
M & L for repair to TABLE FOR HAVs AND ORs by taking down the existing broken /unserviceable bottom stiffner (long) and supply and fixing of new Stiffner (long) of size 900x40x25mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-223)
35
-
-
... More
M & L for Repairs to TABLE DINING OR by taking down the existing broken /unserviceable rusted leg and replacing the same in position with new leg made of 25mm Square mild steel pipe of 16 Gauge thick,760 mm length as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed. (Drg No. FD-165)
10
-
-
... More
M & L for Repairs to TABLE DINING OR by taking down the existing broken /unserviceable front rail and replacing the same in position with new front rail made of 25mm Square mild steel pipe of 16 Gauge thick,1600 mm length as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed. (Drg No. FD-165)
8
-
-
... More
M & L for Repairs to TABLE DINING OR by taking down the existing broken /unserviceable short rail and replacing the same in position with new short rail made of 25mm Square mild steel pipe of 16 Gauge thick,515 mm length as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed. (Drg No. FD-165)
6
-
-
... More
M & L for Repairs to TABLE DINING OR by taking down the existing broken /unserviceable foot rest and replacing the same in position with new foot rest made of 25mm Square mild steel pipe of 16 Gauge thick, 1600 mm length as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed. (Drg No. FD-165)
8
-
-
... More
M & L for Repairs to TABLE DINING OR by taking down the existing broken /unserviceable side stiffener and replacing the same in position with new side stiffener made of 25mm Square mild steel pipe of 16 Gauge thick, 515 mm length as per the standard drawing duly welded in position including applying one coat of red oxide zinc chrome primer to all sides complete all as specified and directed. (Drg No. FD-165)
12
-
-
... More
M & L for Repairs to TABLE DINING OR by taking down the existing broken /unserviceable aluminium sheet over existing block board and replacing the same in position with new aluminium sheet of 22 Gauge of size 1976x 760 mm having glossy shine with nails complete all as specified and directed. (Drg No. FD-165)
75
-
-
... More
M & L for repair to TABLE DINING OR by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1900mmx685mm made of 18mm thick BWP ply exterior grade ,fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-165)
12
-
-
... More
M & L for repair to CHAIR STEEL WITH DESK by taking down the existing broken /unserviceable hand pad and supply and fixing of new hand pad of size 300x600x20mm made out of of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with existing FI plate complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no CHR-18-B / CHR-18-C)
50
-
-
... More
M & L for repair to CHAIR STEEL WITH DESK by taking down the existing broken /worn out FI plate as in hand board pad and supply and fixing of new FI plate of size 180x15x5 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no CHR-18-B / CHR-18-C)
75
-
-
... More
M & L for repair to CHAIR STEEL WITH DESK by taking down/removing the existing broken /unserviceable Legs carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of 20 mm square MS pipe,1.6 mm thick by welding to the exact place and position and make the welded portion smooth by grinding etc including two coats of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no CHR-18-B / CHR-18-C)
50
-
-
... More
M & L for repair to CHAIR STEEL WITH DESK by taking down the existing broken /unserviceable hand rest and supply and fixing of new hand rest of size 255x50x20mm made out of 1st class teak wood fixed including french polishing complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no CHR-18-B / CHR-18-C)
100
-
-
... More
M & L for repair to CHAIR STEEL WITH DESK by taking down/removing the existing broken /unserviceable cane plastic from seat/back and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. TP Godrej Model no CHR-18-B)
150
-
-
... More
M & L for repair to CHAIR STEEL WITH DESK by taking down/removing the existing damaged/ completely fadded cushion cover of seat and back and supply and fixing new seat and back leatherite upholestery cushion cover of black colour ,cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified and as directed. (Drg No. TP Godrej Model no CHR-18-B)
250
-
-
... More
S & F in repair hard Rubber shoe of best quality as per the existing size and specifications, fixed to various type of steel furniture articles complete all as specified and directed.
1345
-
-
... More
M & L for repair to DESK 4'x6' (FD-107) by taking down/removing the existing broken /unserviceable rear Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of 25 mm dia MS round pipe ,1.6 mm thick, 800mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
... More
M & L for repair to DESK 4'x6' (FD-107) by taking down/removing the existing broken /unserviceable front Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of 25 mm dia MS round pipe,1.6 mm thick, 740 mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
... More
M & L for repair to DESK 4'x6' (FD-107) by taking down/removing the existing broken /unserviceable side stiffner carefully by cutting the welded ends with hand held machine and supply and fixing new stiffiner made of 25 mm dia MS round pipe,1.6 mm thick, 430 mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Note: Finishing coat of paint shall be measured and paid seperately)
20
-
-
... More
M & L for repair to DESK 4'x6' (FD-107) by taking down/removing the existing broken /unserviceable foot rest carefully by cutting the welded ends with hand held machine and supply and fixing new foot rest made of 25 mm dia MS round pipe,1.6 mm thick, 1220 mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Note: Finishing coat of paint shall be measured and paid seperately)
18
-
-
... More
M & L for repair to DESK 4'x6' (FD-107) by taking down the existing broken /unserviceable Teak Wood Plank and supply and fixing of new Teak Wood Plank of of size 1220x530mm, 20mm thick as shown on drawing made of 1st class teak wood duly fixed by using metal screws complete all as specified, shown on drawing and as directed.
75
-
-
... More
M & L for repair to DESK 4'6" (Drg No. FD-107) by taking down/removing the existing broken /unserviceable Back side Plywood carefully and supply and fixing new Back side Plywood of size 200x1200mm made out of 6mm thick plywood, one side teak finish fixed as shown on drawing complete all as specified, shown on drawing and as directed.
30
-
-
... More
S & F in repair hard rubber bush of best quality as per the existing size and specifications and fixed to DESK 4'6" complete all as specified and directed. (Drg No. FD-107)
60
-
-
... More
M & L for repair to CHAIR VERANDAH by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia coduit of 1.6mm thick, fixed by proper gas welding and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-19/256) (Note: Finishing coat of paint shall be measured and paid seperately)
105
-
-
... More
M & L for repair to CHAIR VERANDAH by taking down/removing the existing broken /unserviceable rusted MS rod from the chair carefully and S & F new MS rod, 10mm dia connecting rear legs, fixed by proper gas welding and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-19/256) (Note: Finishing coat of paint shall be measured and paid seperately)
30
-
-
... More
M & L for repair to CHAIR VERANDAH by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-19/256)
(Note: The caning of chairs shall be carried only after finishing with painting all as required at site.)
1050
-
-
... More
M & L for repair to CHAIR DINING/CHAIR CBB Wdn by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16,203-228)
750
-
-
... More
M & L for repair to CHAIR EASY by taking down/removing the existing broken /unserviceable cane plastic from seat and recanning the chairs seat in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17,201-229)
350
-
-
... More
M & L for repair to CHAIR EASY by taking down/removing the existing broken /unserviceable cane plastic from back and recanning the chairs back in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17,201-229)
325
-
-
... More
M & L for repair to CHAIR WRITING by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20,202-250)
485
-
-
... More
M & L for repair to CHAIR REVOLVING HIGH BACK /MID BACK by removing pressed foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.and S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs 250 /- per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7001/7000)
100
-
-
... More
M & L for repair to CHAIR REVOLVING HIGH BACK /MID BACK by removing faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping and S&F new tapestry cloth of approved colour and texture to seat and back of chair by using heavy duty gun tacker along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than Rs 250/- per mtr, complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7001/7000)
500
-
-
... More
M & L for repair to CHAIR REVOLVING HIGH BACK /MID BACK by removing old unserviceable arm rest of chair and S&F new arm rest of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed by Engr -in -charge. (Drg No -TP Godrej Model No -PCH-7001/7000)
150
-
-
... More
M & L for repair to CHAIR REVOLVING HIGH BACK /MID BACK by removing old unserviceable pedestal assembly and S&F new pedestal assembly having five arms with twin castor wheels having wheel base not less than 70 cms complete all as directed and shown on drawing. (Drg No -TP Godrej Model No -PCH-7001/7000)
50
-
-
... More
M & L for repair to CHAIR REVOLVING HIGH BACK /MID BACK by removing unserviceable hydraulic gas lift cylinder of chair and S&F new hydraulic gas lift cylinder to chair complete all as directed and shown on drawing. (Drg No -TP Godrej Model No -PCH-7001/7000)
150
-
-
... More
M & L for repair to CHAIR REVOLVING HIGH BACK /MID BACK by removing faded/worn out leatherite from seat or back of chair carefully and S&F new leatherite of required colour to match with texture of seat or back of chair with edging duly machine stiched and fixed to the chair, the rate of tapestry shall not be less than 450 per mtr. complete all as directed and shown on drawing. (Drg No -TP Godrej Model No -PCH-7001/7000)
600
-
-
... More
M & L to remove unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair revolving complete all as directed and shown on drawing.
100
-
-
... More
M & L for repair to CHAIR WITH DESKLET by removing pressed foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.and S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs 250 /- per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7004)
40
-
-
... More
M & L for repair to CHAIR WITH DESKLET by removing faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping and S&F new tapestry cloth of approved colour and texture to seat and back of chair by using heavy duty gun tacker along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than Rs 250/- per mtr, complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7004)
450
-
-
... More
M & L for repair to CHAIR WITH DESKLET by removing UNSV / broken hand board and S&F new hand board made out of 18mm thick prelaminated MDF board (Size 300 x 550 mm) exterior grade both side laminated of same shade with 4mm teak wood edging all around the hand board complete all as directed and shown on drawing.(Drg No -TP Godrej Model No -PCH-7004)
80
-
-
... More
M & L for repair to CHAIR WITH DESKLET by removing UNSV desklet from the chairs carefully and S&F new desklet made of 2mm dia wire as per existing shape and dimension complete all as directed and shown on drawing.(Drg No -TP Godrej Model No -PCH-7004)
100
-
-
... More
M & L for repair to CHAIR WITH ARMS by removing pressed foam cushion, elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.and S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs 350 /- per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7003)
30
-
-
... More
M & L for repair to CHAIR WITH ARMS by removing faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping and S&F new tapestry cloth of approved colour and texture to seat and back of chair by using heavy duty gun tacker along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than Rs 250/- per mtr, complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7003)
90
-
-
... More
M & L for repair to CHAIR WITH ARMS by removing old unserviceable arm rest of chair and S&F new arm rest of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert complete all as specified and directed by Engr -in -charge. (Drg No -TP Godrej Model No -PCH-7003)
80
-
-
... More
M & L for repair to CHAIR WITHOUT ARMS by removing pressed foam cushion, elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.and S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs 250 /- per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7004)
40
-
-
... More
M & L for repair to CHAIR WITHOUT ARMS by removing faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping and S&F new tapestry cloth of approved colour and texture to seat and back of chair by using heavy duty gun tacker along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than Rs 350/- per mtr, complete all as specified and as directed. (Drg No -TP Godrej Model No -PCH-7004)
110
-
-
... More
M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /unserviceable newar from both the berth and S & F new 12mm thick plywood, BWR grade-AA of size 2030x910mm by making necessary cutting at edges duly fixed on GI pipe frame with 10mm dia nuts, bolts and washer complete all as specified, shown on drawing and as directed. (Drg No. FD-112)
90
-
-
... More
M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /unserviceable Long Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Long Rail made of 25 mm square MS tube of wall thickness 1.6mm, 910mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-112) (Note: Finishing coat of paint shall be measured and paid seperately)
180
-
-
... More
M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /wornout FI clamp by cutting the welded ends with hand held machine and supply and fixing new FI clamp of size 40x6 mm,100 mm long by welding to the existing base stiffner of each berth to give stability and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-112) (Note: Finishing coat of paint shall be measured and paid seperately)
45
-
-
... More
M & L for repair to CHARPOY DOUBLE BUNK by taking down/removing the existing broken /wornout FI clamp for holding MNF by cutting the welded ends with hand held machine and supply and fixing new FI clamp of size 25x3mm by welding to the existing base legs and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-112) (Note: Finishing coat of paint shall be measured and paid seperately)
30
-
-
... More
Supply and fixing in repair 09 mm dia machine made screws for upper and lower berth in charpoy complete all as specified and directed.
40
-
-
... More
M & L for Repairs to CHARPOY GI PLY TOP by taking down the existing broken /unserviceable rusted frame and replacing the same in position with new square Frame made of 25mm square mild steel pipe of 1.6 mm thick ,890 mm length welded to the long rail at an equal distance for resting the ply top and connection to 32 mm dia GI pipe from underneath rails for better grip while placing the ply top including applying two coat of black bituminus paint over a coat of red oxide zinc chrome primer complete all as specified and directed. (Drg No. FD-220R)
110
-
-
... More
M & L for Repairs to CHARPOY GI PLY TOP by taking down the existing broken /unserviceable rusted frame and replacing the same in position with new angle Frame made of angle frame of size 25x25x3 mm ,890 mm length welded to the long rail at an equal distance for resting the ply top and connection to 32 mm dia GI pipe from underneath rails for better grip while placing the ply top including applying two coats of black bituminus paint over a coat of red oxide zinc chrome primer. (Drg No. FD-220R)
110
-
-
... More
M & L for Repairs to CHARPOY GI PLY TOP by taking down the existing broken /unserviceable plywood top and replacing the same with new top made of 12mm thick BWR Plywood graed-AA of size 1980mmx900mm duly fixed in position with 12 Nos of 50mm long 8mm dia flat head nut, bolts and washers, made to shape and size all as shown on drawing, as specified and as directed. (Drg No. FD-220R)
1116
-
-
... More
M & L for CONVERSION OF GI CHARPOY by taking down/removing the existing broken /unserviceable Long Rail (whose thread ends were broken either at one end or both side) carefully by loosing existing check nut and elbow and supply and fixing new Long Rail made of 32 mm dia GI Pipe medium grade long rail 1980 mm length, duly threaded the ends upto 22 mm size by grinding etc complete all as specified and as directed. (Drg No. FD-220)
25
-
-
... More
M & L for CONVERSION OF GI CHARPOY by taking down/removing the existing broken /unserviceable Short Rail (whose thread ends were broken either at one end or both side) carefully by loosing existing check nut and elbow and supply and fixing Short Rail of 32 mm dia GI Pipe medium grade 900 mm length made out of long rail retrived from item No 108, duly threaded the ends upto 22 mm size by grinding etc complete all as specified and as directed. (Drg No. FD-220)
25
-
-
... More
M & L for CONVERSION OF GI CHARPOY by taking down/removing the existing broken /unserviceable legs carefully by loosing existing check nut and elbow and supply and fixing legs of 32 mm dia GI Pipe medium grade made out of long rail retrived from item No 108 or short rail retrived from item No.109, duly provided with MS base plate 6 mm welded & painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. (Drg No. FD-220)
65
-
-
... More
Taking down/removing the existing broken /unserviceable 3-way elbow and S & F of new 36 mm dia 3-way GI elbow (ISI brand), having 32 mm bore ,medium grade for the joints of long/short rails complete all as specified and as directed.
25
-
-
... More
Taking down/removing the existing broken /unserviceable check nut and S & F of new 6mm thick check nut for the corner joints of long/short rails complete all as specified and as directed. (Drg No. FD-220)
35
-
-
... More
M & L for CONVERSION OF GI CHARPOY by providing 25 mm square MS Pipe of 1.6 mm thick, 890 mm length or Flat Iron 32 mm x 5 mm thick length 890 mm length support duly welded the ends to the long rail at an equal distance as shown in the drg for resting the Ply top and connecting to 32 GI Pipe from underneath rails for better grip while placing the Ply top including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. (Drg No. FD-220)
200
-
-
... More
M & L for CONVERSION OF GI CHARPOY by taking down the existing worn out /unserviceable newar and S&F new top made of 12mm thick BWR Plywood graed-AA of size 1980mmx910mm duly fixed in position with 12 Nos of 50mm long 8mm dia flat head nut, bolts and washers, made to shape and size all as shown on drawing, as specified and as directed. (Drg No. FD-220)
100
-
-
... More
M & L for repair to CHAIR DINING (PPCP) by taking down the existing broken /unserviceable seat and supply and fixing of new PPCP (Polypropylene Copolymer) seat made to shape 460(w) x 350 (h) x 500 (D) mm of weight not less than 1.20 kg of approved make/shade complete all as specified, shown on drawing and as directed. (Drg No. FD-262/261)
50
-
-
... More
M & L for repair to CHAIR WRITING (PPCP) by taking down the existing broken /unserviceable seat and supply and fixing of new PPCP (Polypropylene Copolymer) seat made to shape 460(w) x 350 (h) x 520 (L) mm of weight not less than 1.20 kg of approved make/shade complete all as specified, shown on drawing and as directed. (Drg No. FD-262/261)
34
-
-
... More
M & L for repair to CHAIR DINING/ WRITING (PPCP) by taking down the existing broken /unserviceable hand rest and supply and fixing of new hand rest of size 260x50x20mm made out of 1st class teak wood fixed with liquer polish complete all as specified, shown on drawing and as directed. (Drg No. FD-262/261)
90
-
-
... More
M & L for repair to CHAIR DINING/ WRITING (PPCP) taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape of required height by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-262/261) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
... More
M & L for repair to CHAIR DINING/ WRITING (PPCP) taking down/removing the existing broken /unserviceable seat/back rest frame carefully by cutting the welded ends with hand held machine and supply and fixing new frame made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape of required height by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-262/261) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
... More
M & L for preparation of old painted steel surface of RACK 4 TIER 2 UNIT by scraping out the old paint by applying paint remover solution, with emary paper, filling metal putty to the uneven surfaces and sanding it again to make the surface smooth and then wipe out the surface and remove the all dust etc with a fine cloth and applying two coat of synthetic enamel spray painting of approved quality as per existing shade externally and internally after applying and drying one coat of metal primer complete all as specified and as shown on drawing. (FD-129)
25
-
-
... More
All as per Serial item No. 120 above but for RACK 4 TIER 1 UNIT complete ditto (DRG.NO. FD-129)
20
-
-
... More
All as per Serial item No. 120 above but for TABLE OFFICE STEEL Model T-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32 complete ditto (DRG.NO. TP-Godrej)
295
-
-
... More
All as per Serial item No. 120 above but for Almirah large steel Glazed complete ditto (DRG.NO. FD-104)
35
-
-
... More
All as per Serial item No. 120 above but for Almirah medium steel Glazed complete ditto (DRG.NO. FD-104)
25
-
-
... More
All as per Serial item No. 120 above but for Almirah medium steel Adjustable shelf complete ditto (DRG.NO. FD-243)
55
-
-
... More
All as per Serial item No. 120 above but for Chair CB 'A' with hand board steel complete ditto (DRG.NO. FD-120)
120
-
-
... More
All as per Serial item No. 120 above but for Chair Dinning /writing steel complete ditto (DRG.NO. FD-261/262)
100
-
-
... More
All as per Serial item No. 120 above but for Table dining OR complete ditto (DRG.NO. FD-120)
120
-
-
... More
All as per Serial item No. 120 above but for Charpoy double bunk complete ditto (DRG.NO. FD-112)
180
-
-
... More
All as per Serial item No. 120 above but for Desk 4' 6" complete ditto (DRG.NO. FD-107)
160
-
-
... More
All as per Serial item No. 120 above but for Rack Type A complete ditto (DRG.NO. F-8)
75
-
-
... More
All as per Serial item No. 120 above but for Rack Type B complete ditto (DRG.NO. F-9)
65
-
-
... More
All as per Serial item No. 120 above but for Rack side 3 / 4 spaces steel complete ditto (DRG.NO. FD-1023/97(M))
100
-
-
... More
All as per Serial item No. 120 above but for Cot double dunk complete ditto (DRG.NO. GE/RD/103 )
25
-
-
... More
All as per Serial item No. 120 above but for Cot double dunk complete ditto (DRG.NO. GE/RD/99 )
35
-
-
... More
All as per Serial item No. 120 above but for Locker large steel 2 Unit for OTM complete ditto (DRG.NO. GE/RD/106 )
25
-
-
... More
All as per Serial item No. 120 above but for Locker bedside steel (OTM) complete ditto (DRG.NO. FD-1029)
250
-
-
... More
All as per Serial item No. 120 above but for Rack for riffle steel complete ditto (DRG.NO. F-10)
12
-
-
... More
All as per Serial item No. 120 above but for Chair revolving high back / mid back complete ditto (DRG.NO. TP-Godrej, PCH-7001/7000)
600
-
-
... More
All as per Serial item No. 120 above but for Chair with Desklet complete ditto (DRG.NO. TP-Godrej, PCH-7004)
620
-
-
... More
All as per Serial item No. 120 above but for Chair with arm complete ditto (DRG.NO. TP-Godrej, PCH-7003)
120
-
-
... More
All as per Serial item No. 120 above but for Chair without arm complete ditto (DRG.NO. TP-Godrej, PCH-7004)
150
-
-
... More
All as per Serial item No. 120 above but for Chair verandah complete ditto (DRG.NO. FD-19)
1050
-
-
... More
Material and labour for polishing to Almirah Large Wooden with Shelf (Drg No. DB-4116/FD-109) by adhering to following steps complete all as specified and as shown on drawing:- (a) Complete removal of old polish
b) The wooden surfaces shall be made smooth by sanding the surface with sand paper of about 120 grit in the direction of grains of wood.
c) Repeat the process with progrssively finner grains with 180-220 grit sanding paper to make the surface more finer.
d) Wipe out the surface and remove the dust with a fine cloth.
e) Examine the surface and fill yellow oxide or wood filler/putty in the holes and sand the surface again to achieve a smooth and cleaner surface.
f) Wipe it again with cloth and apply a coat of french polish and let it dry.
g) Sand the surface again and apply next coat with a soft brush or cloth.
h) Let the surface dry completely and apply a clear coat over it for glossy finish surface.
(Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user requirement)
26
-
-
... More
All as per Serial item No. 144 above but for Almirah medium Wooden with Shelfs complete ditto (DRG.NO.DB-3050/FD-110)
25
-
-
... More
All as per Serial item No. 144 above but for Almirah large Wooden 1/2H x 1/2S complete ditto (DRG.NO.DB-3951)
18
-
-
... More
All as per Serial item No. 144 above but for Almirah medium Wooden 1/2H x 1/2S complete ditto (DRG.NO.DB-3952/FD-108)
12
-
-
... More
All as per Serial item No. 144 above but Table for HAVs and ORs complete ditto (DRG.NO.FD-223)
150
-
-
... More
All as per Serial item No. 144 above but Chair dining / Chair CB'B' Wdn complete ditto (DRG.NO.FD-16, 203, 228)
750
-
-
... More
All as per Serial item No. 144 above but Chair easy complete ditto (DRG.NO.FD-17, 201, 229)
695
-
-
... More
All as per Serial item No. 144 above but Chair writing complete ditto (DRG.NO.FD-20, 202, 250)
485
-
-
... More
All as per Serial item No. 144 above but Book case (Glazed) wooden complete ditto (DRG.NO.FD-90)
40
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements