Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Oct 2023
Closing Date4 Dec 2023
Tender Amount₹ 1,39,50,000
Costs
EMD
₹ 2,14,500Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_619129_1Bid Award Id
ViewTender No
82378/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and as directed.
50
-
-
M & L for filling polymer modified non shrinking slurry with CEBEX 100 (Fosroc) chemical for sunken floors for toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick brush bond over the concrete surfaces by mixing acrylic emulsion NITO BOND BB with brush bond powder and water and testing the same for 48 hours with complete filling with in the sunken floor as per the manufacturer's instruction and technical specification complete all as specified and as directed (Make: M/S Fosroc or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.) including rendering in Cement Mortar 1:3, 15mm thick mixed with approved integral water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: Integral water proofing compound shall be measured and paid separately.
65
-
-
M & L for applying Polymer Modified Mortar made using Shrinkage Compensated Polymer Modified Fibre Reinforced Cementitious Repair Mortar such as Renderoc SP 40 of M/s. Fosroc Chemicals India [P] Ltd. or equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions to form average 15 mm thick even surface complete all as specified and as directed.
350
-
-
M & L for Non-Shrink, Cementitious Micro Concrete using Rendroc RG' manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturer's instructions, laid as in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturer's instructions including providing double scaffolding and safety measures as required and as specified. [Note: Measurement shall be considered for circumference at centerline of core thickness]
4
-
-
M & L for providing additional reinforcement using High Strength Corrosion Resistant Deformed Bars of Grade Fe–500D by checking the diameter of the existing bars, cutting the necessary main reinforcement to the required length with proper development length, tying and binding with 16 SWG black soft annealed binding wire / welding where required / lapping / anchoring with the existing shear connectors / reinforcement so that the additional reinforcement acts monolithically with the existing reinforcement and core concrete complete all as specified and as directed. Note: The shear reinforcement shall also be provided as specified here-in-above in the form of 2 "U" shaped bars if existing shear reinforcement is found deteriorated / diameter of the bars is reduced to form a rigid cage and placing with proper cover block, supports, chairs, spacers etc. Diameter of the new bar shall be equal to the existing bars. Additional reinforcement shall be provided only in case the diameter of the existing bars is found less than 25% of the original diameter.
250
-
-
M&L for two coats of single component polymer based acrylic elastomeric weather proof paint with alkali stable and UV/ IR rays resistant over a coat of hybrid polymer emulsion bonding agent/ primer including necessary preparation of surfaces and filling of existing cracks with flexible type acrylic sealant all as per manufacturer's instructions, as specified and as directed.
Make of external weather proof paint : Perma of NEROLAC Paints or equivalent approved make of weather proof paints specified herein after. Bonding agent/ primer/ sealant shall be of same make as that of external weather proof paint
250
-
-
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately.
300
-
-
M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
350
-
-
M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.
200
-
-
M & L for preparing newly plastered Wall surfaces by using vacuum based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
350
-
-
M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer of same manufacturer as that of paint on newly plastered walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections including necessary preparation of surfaces by using vacuum based sanding machine complete all as specified and as directed.
Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering through their authorised applicators before commencement of the work to GE for approval.
475
-
-
M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed.
375
-
-
M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
973
-
-
M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
35
-
-
M & L for One coats of synthetic enamel paint on old painted wooden surfaces of any description not other wise described over 10 cm width or girth including necessary preparation of surfaces complete all as specified and directed.
6000
-
-
M & L for One coats of synthetic enamel paint on old painted steel surfaces of any description not other wise described over 10 cm width or girth including necessary preparation of surfaces complete all as specified and directed.
3000
-
-
M & L for One coat of Epoxy painting on old 100mm bore CI Pipes surfaces of any description not other wise described including necessary preparation of surfaces complete all as specified and directed.
720
-
-
M & L for One coat of synthetic enamel paint on old painted 20mm bore to 50mm bore GI Pipe surfaces of any description not other wise described including necessary preparation of surfaces, complete all as specified and directed.
700
-
-
M & L for preparing newly plastered Wall surfaces by using vacuum based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
1000
-
-
M & L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of Acrylic Washable Distemper on wall surfaces by using auto roller/ airless sprayer complete all as specified and as directed.
Note:- The contractor shall carryout Distempering works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
15000
-
-
M & L for One coat of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer on old painted Walls/ ceilings, pillasters, bands, borders, soffits of chajjas and projections including necessary preparation of surfaces complete all as specified and as directed.
Notes:- (a) The contractor shall carryout Weather proof Exterior Emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof Exterior Emulsion Painting through their authorised applicators before commencement of the work to GE for approval.
25000
-
-
M & L for Complete removal of existing treatment of any description on walls surfaces by using vacuum based sanding machine, removal of nails including rubbing with sand paper to obtain a smooth surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint on walls complete all as specified and as directed.
Note:- The contractor shall carryout Weather proof Exterior Emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof Exterior Emulsion Painting through their authorised applicators before commencement of the work to GE for approval.
1360
-
-
M & L for One coat of white wash on old decorated surfaces of walls including necessary preparation of surfaces complete all as specified and as directed.
2500
-
-
M & L for One coat of white wash on old decorated surfaces of ceiling including necessary preparation of surfaces complete all as specified and as directed.
5000
-
-
S & F 100mm dia out let, Cast Iron Floor Trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.
10
-
-
S & F 100mm dia out let Cast Iron Nahani Trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.
10
-
-
S & F Cast Iron Bends [any radius], diminishing pieces or tapers [larger bore measured] of 150mm bore, for Cast Iron soil / waste / vent pipes complete all as specified and as directed.
5
-
-
S & F Cast Iron Branch pieces of 150 mm bore [any radius], Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.
50
-
-
S & F Cast Iron Bends [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for Cast Iron soil / waste / vent pipes complete all as specified and as directed.
5
-
-
S & F Cast Iron Branch pieces of 100 mm bore [any radius], Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.
50
-
-
Taking down Eaves Gutters /SWR Pipes [any size or pattern], including all fittings, heads, shoes, bends, swan-necks, etc. from any height complete all as specified and as directed.
356
-
-
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed.
150
-
-
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
25
-
-
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed.
150
-
-
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
25
-
-
S & F 75mm bore outlet PVC [SWR] Floor Trap with grating including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with Access Door including jointing with solvent cement complete all as specified and as directed.
50
-
-
S & F 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with Access Door including jointing with solvent cement complete all as specified and as directed.
50
-
-
S & F 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.
10
-
-
Taking down or up steel tubing and connections including Taps / Valves for 15 mm bore of pipe complete all as specified and as directed.
100
-
-
Taking down or up steel tubing and connections including Taps / Valves for 20 mm bore of pipe complete all as specified and as directed.
150
-
-
Taking down or up steel tubing and connections including Taps / Valves for 25/32 mm bore of pipe complete all as specified and as directed.
400
-
-
Taking down or up steel tubing and connections including Taps / Valves for 40/50 mm bore of pipe complete all as specified and as directed.
150
-
-
Refixing Old Steel tubing of 15 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
50
-
-
Refixing Old Steel tubing of 20 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
100
-
-
Refixing Old Steel tubing of 25/32 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
100
-
-
Refixing Old Steel tubing of 40/50 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
100
-
-
Supplying and laying GI tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to the wall and ceiling or laid in trenches including testing complete all as specified and as directed. Note: Earth work and excavation will be measured and paid separately.
50
-
-
Supplying and laying GI tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to the wall and ceiling or laid in trenches including testing complete all as specified and as directed. Note: Earth work and excavation will be measured and paid separately.
50
-
-
Supplying and laying GI tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to the wall and ceiling or laid in trenches including testing complete all as specified and as directed. Note: Earth work and excavation will be measured and paid separately.
150
-
-
Supplying and laying GI tubing of 40 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to the wall and ceiling or laid in trenches including testing complete all as specified and as directed. Note: Earth work and excavation will be measured and paid separately.
50
-
-
Supplying and laying GI tubing of 50 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to the wall and ceiling or laid in trenches including testing complete all as specified and as directed. Note: Earth work and excavation will be measured and paid separately.
50
-
-
S & F 32mm outer dia of pipe, 3–layer PP–R Polypropylene random copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing complete all as specified and as directed.
150
-
-
Taking up existing CI pipe of any dia including all fittings like heads, shoes, bend, swan-neck etc and refixing the same after cleaning. complete all as specified and as directed.
465
-
-
S & F 150mm bore Cast iron Spun pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to the wall complete all as specified and as directed.
150
-
-
S & F 100mm bore Cast iron Spun pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, , laid in trenches or in floors complete all as specified and as directed.
15
-
-
S & F 100mm bore Cast iron Spun pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to the wall complete all as specified and as directed.
150
-
-
M & L for jointing only 100 mm bore cast iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints complete all as specified and as directed.
150
-
-
M & L for jointing only 150 mm bore cast iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints complete all as specified and as directed.
150
-
-
S & F Stack clamps made out of 50 X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 150mm dia pipes complete all as specified and as directed.
174
-
-
S & F Stack clamps made out of 50 X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipes complete all as specified and as directed.
348
-
-
Dismantling of sand stone slabs and tiles in flooring, apron etc of any description or thickness laid dry and pointed in any mortar complete all as specified and directed.
16
-
-
M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.
25
-
-
M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.
30
-
-
M & L for machine cut Kota stone slab as in kitchen platform, landing of staircase using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.
40
-
-
M & L for machine cut Kota stone slab as in riser of steps, skirting, dado etc. using 20 to 25mm thick slabs laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including borders, margins in two or more shades of slabs over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed.
20
-
-
M & L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.
45
-
-
Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed.
525
-
-
M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 300 mm X 450 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.
150
-
-
M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 300 mm X 200 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.
50
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
50
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
250
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.
25
-
-
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.
1000
-
-
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along external walls where the apron is not provided using chemical emulsion @ 7.5 litres per Sq.m of the vertical surface of sub - structure to a depth of 300 mm by 12 mm dia holes at 150 mm centre to centre both ways including excavating channel along the wall and rodding etc complete all as specified and as directed.
400
-
-
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed
300
-
-
Taking down and Refixing shutter in the other opening shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.
600
-
-
Taking down and Refixing shutter in the other opening shutters of any description not exceeding 1.00 Sq.m each after easing and adjusting complete all as specified and as directed.
300
-
-
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed.
40
-
-
Taking down Chowkats or frame with shutters exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed.
120
-
-
Taking down wooden shutters of any description not exceeding 1 Sq.m each complete all as specified and as directed.
30
-
-
Taking down wooden shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each complete all as specified and as directed.
80
-
-
Taking down aluminium shutters of any description not exceeding 1.5 Sq.m each complete all as specified and as directed.
60
-
-
Taking down frame work such as grill not exceeding 1.5 Sq.m each to facilitate repairs to window and refixing the same after repair with new screws complete all as specified and as directed.
100
-
-
S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
6
-
-
S & F 35mm thick Factory made Second Class Hard Wood, Plain framed, Panelled Shutter [Two Panel] with Lock Rail and Panel of 9 mm BWP Commercial Ply or 12 mm Veneered Particle Board with Commercial Veneering on both faces, the size of Rail and Stile as per IS – 1003 [Part – I], Kiln Seasoned and Chemically Pressure treated and fitted to Chowkats complete all as specified and as directed.
50
-
-
S & F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
210
-
-
S & F 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed.
105
-
-
S & F 30mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed.
38
-
-
M & L for Powder coated aluminium sections of approved colour for doors, Windows, Ventilators, Partitions, with frames and shutters fully or partly glazed, sliding / openable, with extruded aluminium sections not less than 1.5mm thick and powder coating not less than 60 micron thick including necessary jointing cleats, rubber beading, neoprene packing, aluminium snap beading, screws, powder coated aluminium fittings such as handles, aluminium butt hinges , aluminium tower bolts, stainless steel friction hinges, locking arrangements etc. complete all as specified and as directed. Notes:
[a] The size of aluminium extruded sections shall conform to Designation 63400 all shall be as specified in relevant IS code and as specified in MES Schedule Part - I. [b] Panel inserts such as Glass / Particle board / Gauze and grill shall be measured and paid separately at supply only rates.
[c] Weight of aluminium sections shall only be accounted for payment purpose. Weight of aluminium Handles, Butt Hinges & Tower Bolts shall not be accounted for payment purpose. [d] The unit rate quoted shall be deemed to include for cost of jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges, locking arrangements etc., and fixing only of panel inserts of glass / particle board / gauge and grill.
200
-
-
Supply only 4 mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
15
-
-
Supply only 5 mm thick Sheet Glass ordinary quality in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
10
-
-
Supply only Stainless steel wire mesh with aperture not exceeding 1.40 mm and dia of wire 0.36 mm including supply of tinned tacks or stainless steel wire staples complete all as specified and as directed.
12
-
-
Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including supply of Powder Coated Aluminium Channel of size 10 X 10 X 1.5mm for fixing Deco Grill complete all as specified and as directed.
30
-
-
S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and as directed.
100
-
-
S & F Solid PVC door frame of size 100mmX95mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and as directed.
28
-
-
S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed.
55
-
-
S & F PVC Solid Ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube, the two vatted profiles are to be reinforced with 19 x 19mm MS square tube, 50% of bottom portion is fixed with 4mm thick pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass louvers and covered with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc. complete all as specified and as directed.
15
-
-
S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.
480
-
-
S & F Aluminium anodised barrel Tower Bolt of size 100 mm size of extruded section complete all as specified and as directed.
150
-
-
S & F in repairs Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.
100
-
-
S & F in repairs Aluminium anodised barrel Tower Bolt of size 100 mm size of extruded section complete all as specified and as directed.
75
-
-
S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150 mm long complete all as specified and as directed.
480
-
-
S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 100 mm long complete all as specified and as directed.
150
-
-
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150 mm long complete all as specified and as directed.
85
-
-
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 100 mm long complete all as specified and as directed.
65
-
-
S & F 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.
600
-
-
S & F 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.
140
-
-
S & F in repairs 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.
100
-
-
S & F in repairs 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.
50
-
-
S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
200
-
-
S & F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
100
-
-
S & F in repairs Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
100
-
-
Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed.
2.5
-
-
S & F Mild Steel work conforming to Fe - 290, Grade E-165, as in framed and hunged gates, including Pintle hinges, stops, hand-made sliding bolts, etc. framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed.
250
-
-
S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes, including Bolts, if required, Hooks [Stay], heavy, for Large Gates, Hook and Pintle Hinges, large Hasps and Staples, Chains, hand made Sliding Bolts, Clamps, Hold Fasts, Wall Ties, Hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed.
564
-
-
S & F in repairs Stainless steel wire mesh with aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples with new wooden beading complete all as specified and as directed.
173
-
-
Taking down cup board shutters, shelves, etc of any description and size complete all as specified and as directed.
100
-
-
S & F 18mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade complete all as specified and as directed.
50
-
-
S & F 18mm thick Plywood, Grade BWR, Type BB, fixed with screws to Wooden Frames complete all as specified and as directed.
50
-
-
S & F 0.9 mm thick Decorative Laminate, Type - 1 of Surface Finish, Colour and Pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.
50
-
-
S & F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour, articles not exceeding 200 Cu.cm each complete all as specified and as directed.
10
-
-
Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.
7.5
-
-
M & L for 75mm thick PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth with out using extra cement and providing 12mm thick joints for full depth of PCC at every 3.00 m and every change of direction duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade of any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
100
-
-
Demolition of Cement Concrete unreinforced of any description and in any position not otherwise specifically provided for and removing rubbish to a distance exceeding 1.50 KM complete all as specified and as directed.
62
-
-
M & L for PCC 1:5:10, Type E-2, using 40mm graded stone aggregate as in filling in Sunken Floors etc complete all as specified and as directed.
20
-
-
M & L for 40 mm average thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate including mixing water proofing compound as per manufacturers instructions surface finished even and smooth without using extra cement complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately.
57
-
-
M & L for 25 mm average thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate including mixing water proofing compound as per manufacturers instructions surface finished even and fair as in levelling course, padding concrete and the like complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately.
350
-
-
M & L for providing cement concrete 1:2:4, Type B-0, using 12.5mm graded aggregate as in coping, bed blocks, hold fast blocks, door/ window frames and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.
6.75
-
-
M & L filling of cement mortar 1:3 mixed with approved integral water proofing compound as per manufacturers instructions around sides of nahani trap, gully trap. Rain water pipe outlets, etc and making good the disturbed surfaces all as per existing complete all as specified and as directed.
400
-
-
Supply only integral water proofing compound [ISI marked] of approved make.
69.5
-
-
M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of cold applied bituminous primer @ 0.50 KG per Sq.m, applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion including applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m on top for water proofing treatment complete including taking down existing Roof Treatment of any description including PCC padding of any description and removing rubbish to a distance exceeding 1.5 KM but not exceeding 5.0 KM complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately.
350
-
-
M & L for Plain Cement Concrete Tiles of size 250 X 250 mm / 300 X 300 mm, 25mm thick, Hydraulically pressed as in Terrace Floors, with grey cement and no pigments, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:3 complete all as specified and as directed.
350
-
-
M & L for 100 mm thick, PCC 1:2:4, Type B-2, using 40mm graded stone aggregate as in Floors , surface finished even and smooth with out using extra cement and spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified and as directed.
181
-
-
M & L for Forming Contraction Joint [Dummy], 30mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade "A" complete all as specified and directed.
10
-
-
M & L for removing Plants with roots by chipping Walls / Beams / Junctions of Vertical Stacks / Water Supply lines or at any other location as directed, applying recommended chemical to prevent growth or plants and making good the disturbed portion with Cement Mortar 1:3 or with PCC 1:2:4, Type B0 [using 12.5 mm graded aggregate] and painting the surfaces to match with existing treatment / finishes and removing debris to a distance not exceeding 1.50 KM complete all as directed.
200
-
-
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 15 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.
15
-
-
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.
10
-
-
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 40 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.
10
-
-
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.
15
-
-
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 80 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.
2
-
-
M & L for Cleaning and removing all scale dirt etc from mouths of circulating pipes of water tanks etc of capacity not exceeding 250 Litres a complete all as specified and as directed.
978
-
-
M & L for Cleaning and removing all scale dirt etc from mouths of circulating pipes of water tanks etc of capacity exceeding 5000 Litres and not exceeding 25000 Litres complete all as specified and as directed.
40
-
-
S & F in repairs PVC Lid for 250/500 Litres water tank capacity complete all as specified and as directed.
50
-
-
S & F in repairs PVC waste pipe of dia 32/40 mm complete all as specified and as directed.
500
-
-
S & F in repairs PVC syphon kit (any type/ any pattern) suitable for 10 Litres capacity 'Slimline' low level flushing cistern and make functional complete all as specified and as directed.
250
-
-
S & F in repairs Plastic water closet seat cover black or white or coloured with MS Chromium plated hinging device complete all as specified and as directed.
110
-
-
S & F in repairs float handle suitable for existing low level flush cistern of any description and capacity complete all as specified and as directed.
150
-
-
S & F Rotational Moulded Polythene [HDPE] Water Tanks, Triple Layered, ISI Marked, Cylindrical & Vertical Type 225 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.
65
-
-
S & F in repairs, Ball Brass Valve, 15 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
45
-
-
S & F in repairs, Ball Brass Valve, 40 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
25
-
-
S & F in repairs, Ball Brass Valve, 50 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
15
-
-
S & F in repairs Wall mixer, 15mm dia, Single Lever cast copper alloy, chromium plated Hot and Cold with provision for connection to Overhead Shower complete with 115mm long bend pipe, connecting legs & wall flange complete as per Jaquar Catalogue No. CON-273KNUPR or its equivalent in Kohler / Cera / Parryware / Grohe / Crabtree complete all as specified and as directed.
2
-
-
S & F in repairs 15mm bore GI Nipple of any length fixed to water tanks complete all as specified and as directed.
50
-
-
Clearing the blockages in waste water drain pipe lines up to 75mm bore dia by rodding or by other mechanical means and removing the mud/ muck to a distance not exceeding 1.5 Km and burried under ground complete all as specified and as directed.
275
-
-
Clearing the blockages in soil drain pipe lines up to 110mm bore dia by rodding or by other mechanical means and removing the mud/ muck to a distance not exceeding 1.5 Km and burried under ground complete all as specified and as directed.
300
-
-
S & F in repairs Stainless Steel, Soap Dish, Fancy Type complete all as per Jaquar Catalogue No. AQN-7731 or its equivalent in Kohler / Cera / Parryware / Grohe / Crabtree complete all as specified and as directed.
50
-
-
S & F in repairs Glass Shelf of size 450 X 150mm with SS railing/ cage and Chromium plated Brackets complete all as specified and as directed.
50
-
-
S & F in repairs 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
50
-
-
Taking down existing wash hand basin or sink of any description and size and Refixing the same with new brackets/ rods, bolts, etc. in the same place including making good disturbed surfaces complete all as specified and as directed.
200
-
-
S & F Stainless Steel Kitchen Plate Rack of size 600x750x220mm, made of 18 gauge thick stainless steel sheet with 8mm dia rods including taking down of existing unserviceable stainless steel plate rack of any size and description complete all as directed. [Make: Prayag / Nirali / Jayna / Blue star]
50
-
-
S & F in repairs Stainless steel kitchen sink, made of stainless steel 1 mm thick, with plugs, washers and Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long including bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets and connecting union to pipe, overall size 495mm X 420mm, bowl size 410mm X 330mm X 160mm complete all as specified and as directed.
5
-
-
S & F in repairs Stainless steel kitchen sink with draining board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
30
-
-
S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.
50
-
-
S & F in repairs Vitreous China Anglo Indian type Wash Down Water Closet [Semi-Pedestal pattern], White, and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.
5
-
-
S & F in repairs Vitreous China Squatting Pan "Orissa Pattern", White of size 580 mm X 440 mm with integral foot rests and 'P' or 'S' Trap including provision of lime concrete bedding and connections to pipe and flush pipe complete all as specified and as directed.
5
-
-
S & F 40mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc complete all as specified and as directed.
50
-
-
S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.
50
-
-
S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
300
-
-
S & F in repairs Bib Taps, 15 mm dia, Brass Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified and as directed.
300
-
-
S & F in repairs Bib Taps, 15 mm dia, PTMT, minimum weight 90 grams, any colour, standard type, screwed down for iron pipe and fixed etc. complete all as specified and as directed.
300
-
-
S & F in repairs Stop Valves, 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and as directed.
150
-
-
S & F in repairs Stop Valves, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, Fancy Type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed.
100
-
-
S & F in repairs Angle Cock, 15 mm dia, brass, Chromium Plated, fancy type, screwed down high pressure for iron pipe etc. complete all as specified.
400
-
-
S & F in repairs Health Faucet with 1.00 m long flexible tube, wall hook, non return valve complete all as specified and as directed.
250
-
-
S & F in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle including brackets and connections to pipe and flush pipe complete all as specified and as directed.
75
-
-
S & F PVC Connection of 15mm Bore and 450mm long with PTMT check nut and union etc. complete all as specified and as directed.
200
-
-
S & F in repairs PTMT Grating Doom, 100 mm dia [Minimum weight 25 Grams] without waste hole or with waste hole to insert waste pipe complete all as specified and directed.
100
-
-
S & F in repairs, Brass Chromium Plated Shower Rose of size 125mm with or with out swivel joints fixing to steel pipes complete all as specified and as directed.
100
-
-
S & F in repairs, Brass spindles suitable for existing bib taps/ stop cocks of any description and size complete all as specified and as directed.
200
-
-
S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 6 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed.
80
-
-
S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, etc. complete all as specified and as directed.
5
-
-
S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 450 mm X 300 mm including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, etc. complete all as specified and as directed.
50
-
-
S & F 40 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
50
-
-
Hacking out old broken glass [any thickness, size, quality or description] from wooden frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.
45
-
-
S & F 4 mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
30
-
-
S & F 5 mm thick Sheet Glass ordinary quality in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
15
-
-
S & F 100 mm, Brass Mortice Lock with 4 Levers, vertical type with keys complete all as specified and as directed.
25
-
-
S & F in repairs Harrison Rails [Curtain Rails], Anodised Aluminium alloy, 20 mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed.
100
-
-
S & F in repairs Decorative type Stainless Steel Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre and Decorative type Stainless Steel Globe type Brackets of size suitable to 25mm dia curtain rod on either sides complete all as specified and as directed.
100
-
-
S & F Continuous [Piano] Hinges, Mild Steel, Bright finish or Electrogalvanised and width of Flaps 40mm [When Open] complete all as specified and as directed.
52
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements