Military Engineer Services Tender

M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for providing Cement Concrete, Type C1, 1:3:6 using 20mm Graded Aggregate as in Lintels up to 1.5m Clear Span, Cills, Steps, Seismic and other Similar Bands, Plinth Courses, Copings, Bed Plates etc. complete including necessary formwork complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and 3 mm thick Hylam Sheet top cover for fixing switches, fittings, regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed.

S & F Switch Piano, Flush Button, Single Pole, One Way, 5 Amps, 230 Volts complete all as specified and as directed.

S & F Square recessed mounted Flat Panel LED Ceiling Light suitable for fixing in 2' X 2' Grid False Ceiling of not less than 3600 Lumens output, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF0.95 Make: Model / Catalogue No. TCR-145-36-57-SL-NWH of Crompton Greaves or its Equivalent Model in Philips / Havells / Wipro / GE / Bajaj / Jaquar

M & L for Taking down Ceiling Fan of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm, replacement of Spares such as Capacitor 2.5 Mfd, Bearings, Shaft Bushes, Capacitor, Cotter Pin, Clamps, Rubber Bushes, Nuts & Bolts etc. as required and also including cleaning, greasing and spray painting with two coats of synthetic enamel paint of approved colour over a coat of zinc chrome primer after filling cavities with filler and complete all as specified and directed.

M & L for Sub main wiring with 2 runs of single core 1.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 1.5 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit

M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit

Supply, install, testing and commissioning of 5 Star rated Hi-Wall Split type Air Conditioner [Indoor & Outdoor Units] with Cordless Remote Control Unit and with in-built advanced Air Filters for better indoor air quality with latest Inverter technology, having Eco friendly Refrigerant Gas, Copper Condenser Coil, EER 4.5 or above of Capacity 2.0 TR, Summer Cool, Inverter Compressor, Automatic 2D Swing Copper Condenser, BLDC Motor, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / Voltas Note: The rate quoted by the contractor is deemed to include for Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any height and Copper tube of suitable size, Drain Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 20mm dia as required and 3 Core, 4 Sq.mm, PVC Insulated and PVC sheathed, heavy duty cable, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade as required for connecting indoor and outdoor units.

S & F Electronic wall mounted time delay Voltage stabilizer of 5 KVA Capacity, Automatic Operation, for input variation of 170 Volts to 250 Volts with stabilised voltage of 230 Volts with accuracy of ± 2.5% complete all as specified and as directed Make: V Guard / Servo / Kee Line

All as per Serial Item No. 7 above but for one SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket, with 1100 Volts, FRLS Grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 and including 1100 Volts, FRLS Grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 as earth continuity conductor and connecting to earth dolly complete all as specified and as directed.

S & F SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed.

S & F MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed.

S & F MCB DB, SPN, 6 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed.

S & F MCB, DP, 6 to 32 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed.

S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and depth not exceeding 1.5m and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed.

M & L for Dry River Sand cushioning over and around the cable for cable protection in trenches, levelled and punned down complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.

Supply and lay Bricks, Common Burnt, Clay Building Bricks, Sub–Class "B", Designation 75 in trenches for cable protection complete all as specified and as directed.

Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 4 Core, 16 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc.complete all as specified and as directed.

All as per Serial Item No. 7 above but one 3 Pin Switch Socket Outlet 15 Amps on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.

S & F Switch Piano, Flush Button, Single Pole, One Way, 16 Amps, 230 Volts complete all as specified and as directed.

S & F Socket Outlet, Multipurpose, 3 pin, 16 Amps and 3 pin, 6 Amps, Flush Type, 230 Volts controlled by One Switch complete all as specified and as directed.

S & F Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. CON-053KN or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified.

S & F Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] of 25 Litres Capacity with 2000 Watt Capacity Heating Element, Conforming to IS - 2082, Vertical Storage type with Stainless Steel Inner Tank and ABS Outer Shell complete fixed to wall with suitable expansion fasteners including 15mm dia PVC Flexible Hot & Cold Water connections and 15mm bore Brass Chromium Plated Non-Return Valve including taking out old unserviceable Geyser and depositing to MES Store Yard complete as specified and as directed. Make: Bajaj / Usha / Crompton Greaves / Jaquar

Supply, install, testing and commissioning of 4 Star rated Floor Standing [Tower Type] Air Conditioner, Nominal Cooling Capacity of 4.0 TR, 415 Volts, 50 Hz, 3 Phase [Indoor / Outdoor Units] with Cordless LCD Remote Control Unit and with in-built advanced Air Filters for better Indoor Air Quality, R-32 Eco-Friendly Refrigerant, High Energy Efficient Rotary Compressor, Wide Angle Powerful Air Flow [Automatic 2D Swing / 2 Way Swing], having with 100% Copper Condenser Coil, Cooling Capacity of 44000 BTU/Hour, Air Flow Volume of 870 / 700 CFM [Wet] [High/Low], Ambient Temperature Range of up to 52º C [Cooling], ISEER 3.0 or above, BLDC Motor, Communication Cable from ODU to IDU of required length, necessary Copper Pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable as per manufacturer instructions to suit the site requirement complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / Voltas. Note: The rate quoted by the contractor is deemed to include for Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any location, Drain Pipe, Suction Pipe & Liquid Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 20mm dia of required length and providing Copper tubing of suitable size [up to 20.00 RM], Power Supply to ODU & IDU with 6 Core, 2.5 PVC Insulated and PVC Sheathed, Heavy Duty, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade up to 20 Metres for connecting Indoor and Outdoor Units. Copper Tube & Copper Cable provided beyond 20.00 Metres shall be measured and paid separately under respective item of this BoQ.

S & F 5/8" dia Hard drawn Refrigerant Grade Seamless Heavy Gauge Copper Piping with 0.6mm / 24 SWG wall thickness suitable for Split type Air conditioners and connecting between Indoor and Outdoor unit including fixtures and duly insulated with 10mm thick Nitrile Rubber Insulation complete all as specified and directed. Note : Length of Pipe shall be measured beyond 20.0m length from AC unit.

Supply, lay, test and commissioning of 6 Core, 2.5 Sq.mm, PVC Insulated and PVC sheathed, heavy duty cable, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked laying in duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc. complete all as specified and as directed.

M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit

S & F MCB DB, TPN, 4 Way, 415 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs and provision for MCCB as incomer complete all as specified.

S & F MCB, TPN, 40 to 63 Amps, 10 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed.

S & F MCCB, FP, 100 Amps, 16 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed.

Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 4 Core, 25 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc.complete all as specified and as directed.

Supplying, Fixing / Laying, Testing & Commissioning of Heavy duty PVC Conduit, 40 mm dia laid on floors or laid in trenches etc. inclusive of boxes [Junction / Terminal but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for drawing XLPE Cable complete all as specified and as directed.

S & F TP & N Enclosure, 5 Pin with 3 Pole and Earth Metal Plug & Socket for incorporating FP MCB complete including One MCB, TP, 32 Amps, 415 Volts complete all as specified and as directed.

Supply, install, testing and commissioning of 4 Star rated Floor Standing [Tower Type] Air Conditioner, Nominal Cooling Capacity of 3.0 TR, 415 Volts, 50 Hz, 3 Phase [Indoor / Outdoor Units] with Cordless LCD Remote Control Unit and with in-built advanced Air Filters for better Indoor Air Quality, R-32 Eco-Friendly Refrigerant, High Energy Efficient Rotary Compressor, Wide Angle Powerful Air Flow [Automatic 2D Swing / 2 Way Swing], having with 100% Copper Condenser Coil, Cooling Capacity of 35000 BTU/Hour, Air Flow Volume of 870 / 700 CFM [Wet] [High/Low], Ambient Temperature Range of up to 52º C [Cooling],ISEER 3.0 or above, BLDC Motor, Communication Cable from ODU to IDU of required length, necessary Copper Pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC Drain Pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable as per manufacturer instructions to suit the site requirement complete all as specified and as directed. Make: Blue Star / Hitachi / Daikin / Carrier / Voltas. Note: The rate quoted by the contractor is deemed to include for Powder Coated Mild Steel Fixing Brackets for Outdoor and Indoor Units at any location, Drain Pipe, Suction Pipe & Liquid Pipe made of High Density Polyethylene Pipes [HDPE] of pressure rating 6 KGf / Sq.cm of 20mm dia of required length and providing Copper tubing of suitable size [up to 20.00 RM], Power Supply to ODU & IDU with 6 Core, 2.5 PVC Insulated and PVC Sheathed, Heavy Duty, ISI marked with Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade up to 20 Metres for connecting Indoor and Outdoor Units.

S & F MCB DB, SPN, 12 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed.

Supplying and laying MS ERW Pipe, 150 mm bore, Heavy Grade , conforming to IS – 1239 including all fittings as in Riser and Sprinkler or laid in floors or fixed to walls and ceilings including testing including applying two coats of Synthetic Enamel paint [Signal Red Colour] over one coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed.

Supplying and laying MS ERW Pipe, 80 mm bore, Heavy Grade , conforming to IS – 1239 including all fittings as in Riser and Sprinkler or laid in floors or fixed to walls and ceilings including testing including applying two coats of Synthetic Enamel paint [Signal Red Colour] over one coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed.

S & F Single Headed Fire Hydrant Landing Valve of Type A of size 63 mm dia conforming to IS – 5290 including all Joints and Jointing Materials complete complete all as specified and as directed.

S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 100 mm Dia, confirming to IS – 14846, Class PN – 1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed.

S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 150 mm Dia, confirming to IS – 14846, Class PN – 1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed.

S & F Cast Iron Non Return Valve with bypass arrangement with suitable flanges, suitable for 100 mm bore pipes confirming to IS – 5312, Class PN –1.6, including necessary nuts, bolts, washers, rubber gasket etc for jointing complete all as specified and as directed.

S & F Cast Iron Non Return Valve with bypass arrangement with suitable flanges, suitable for 150 mm bore pipes confirming to IS – 5312, Class PN –1.6, including necessary nuts, bolts, washers, rubber gasket etc for jointing complete all as specified and as directed.

S & F 63mm dia 15 metre long CP Hose conforming to IS – 636 complete with Male and Female Coupling conforming to IS – 903 including all Joints and Jointing Materials, complete all as specified and as directed.

S & F Branch Pipe Gun Metal 63mm Instantaneous Inlet, made threaded outlet, 15mm Bore Nozzle, Long conforming to IS – 903 including all Joints and Jointing Materials including complete all as specified and as directed.

S & F Fire Hose Box / Cabinet made of 16 gauge MS Sheet 800mm X 600mm X 250mm with Double Door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside fixed to wall or mounting on angular iron stand and suitable for fixing Hose Reel of 30 m long complete with coupling branch pipe and nozzle including PCC foundation etc., complete all as specified and as directed.

M & L for Construction of Valve Chamber of size 1050 X 1050 X 1050 mm internal size suitable for Sluice Valve, with PCC 1:4:8, Type D2, using 40mm graded aggregate for foundation, 200 mm thick Brickwork with Fly Ash Bricks in Cement Mortar 1:6, 40 mm thick PCC, 1:2:4, Type B1, using 20mm graded aggregate Coping, rendering in CM 1:4, 15 mm thick including provision of Mild Steel Sheet Cover 3 mm thick with 40 X 40 X 6 mm size Angle Iron frame work embedded in concrete with suitable hinges and locking arrangements including two coat of synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and including necessary earth work excavation in any type of soil etc., removal of surplus soil off the premises, complete all as specified and shown on drawing CEDD / TD / 119, Sheet No. 1 / 1 dated 20 August 1983, revised up to 21 September 1992.

M & L for Cutting Bituminous Road / Hardstanding etc. as required for Jointing / Laying Cables and Pipeline of width not exceeding 300mm and depth not exceeding 600mm and refilling after laying and making good with PCC 1:2:4, Type B1 using 20mm graded stone aggregate, 100mm thick complete all as specified and as directed.