Military Engineer Services Tender

M&L for preparing the soil base for planting grass by levelling the base to required slopes and levels, supplying and spreading 02 parts of sand, 01 Part of bio fertiliser and one part of red loamy virgin soil for growth of grass to an average thickness of 200mm including mixing vermin compost etc., to improve the fertility of the soil in the required proportion and finally preparing the soil base suitable for planting carpet grass etc. including removal surplus debris outside MoD land, complete all as specified and as directed.

M & L for planting ever green grass of natural Korean/mexican feather carpet grass of approved pattern over the prepared base lawn/carpet area with good earth including watering, removing the weeds or any other vegetation, mixing the manure from time to time and pesticides as required for healthy growth as per standard gardening practice complete all as specified and directed.

M & L for planting of approved species of crotons (height of plant not less than 75 cm above ground level) of approved spacies at a spacing not exceeding 200cm C/C including excavation of pit of min dimension 50cmx50cmx50cm and removal of excavated earth to outside the MD land, preparation of ground upto 30cm deep and filling with good earth, cow dung, vermi composit and watering etc complete all as specified and directed.

All as per item no 06 but approved species of Hedge plants

All as per item no 06 but approved species of Sapling Nandivardhini

All as per item no 06 but approved species of Aclypha

All as per item no 06 but approved species of Rednitequeen

All as per item no 06 but approved species of Ticama Orange

All as per item no 06 but approved species of Gulphamiya

All as per item no 06 but approved species of Songs of India

All as per item no 06 but approved species of Variegated leaves

All as per item no 06 but approved species of Duranto

All as per item no 06 but approved species of Boxwood

Supply and planting Flower plant (Plant height 2-3 ft) with pots of approved species of Lantama varities including necessary earth work and providing cow dung manure etc obtained from nurseries complete all as specified and directed.

All as per item no 17 but approved species of Plumeria Pudica

All as per item no 17 but approved species of Alamanda mini

All as per item no 17 but approved species of Ixoras white

All as per item no 17 but approved species of Singapore Ixora

All as per item no 17 but approved species of Button rose

Supply and planting Ornamental plants Cycas Revoluta Gymnosprem spices in pit of size 800mmx800mmx800mm height (Plant height not less than 8.00 ft) including necessary earth work and providing cow dung manure, brick edging around the plant complete.

Supply and planting Mirchi Mari Gold Plant spices in pit of size 1000mm x 1000mm x 1000mm height (Plant height not less than 7.00 ft) including necessary earth work and providing cow dung manure, brick edging around the plant complete.

NOTE for Item no 5 to 24 :- (a)Tree/plants will be obtain from nursery of AP Govt or as approved by GE. Payment shall be made only for the plants found alive. (b) All plants,Hedge, Grass provided under Sch A Part-I shall be maintained by watering, taking out weeds, manuring the organic manure at regular intervals, using chemical fertilizers, spraying pesticides etc. for healty growth including trimming branches/grass to maintain proper shape etc. all as per standard gardening practice up to certified date of completion of entire work by employing 01 No Mali (unskilled) per day of 08 hrs duration except on Sundays and holidays. Water shall be supplied by MES for maintaining the grass and plants. Contractor shall be responsible for all necessary arrangements for collection and conveyance of water from MES water supply points/ source up to 5 km from the site. Necessary water tanker with tractor,water browser ,PVC pipe,sprinkler etc required for watering purpose is the responsibility of the contractor.Manure and pesticide required for maintenance of the plant under the above mentioned items up to certified date of completion of entire work shall be the resposibility of the contractor. Quoted Rates shall deemed to include for all these aspect.

Supply , laying and testing 15 mm bore High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed

All as per item no 26 here-in-before but 20 mm bore

All as per item no 26 here-in-before but 50 mm bore

S & F 15 mm bore, PTMT pop up sprinkler,maxm throw radius 12 m, discharge rate 12.5 lit/min,adjustable 360 degree full circle or adjustable from 20 degree to 360 degree and suitable with maxm pressure 4.8 bars screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.

All as per item no 30 here-in-before but 25 mm bore

All as per item no 30 here-in-before but 50 mm bore

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; termite proof fixed to aluminium frame work complete all as specified and directed.

S&F 5.5 mm thick tinted glass, selected quality ,glazing with oil putty and glazing clips in metal frame and with second class hard wood beading in wooden frames in squares exceeding 0.5 Sqm in each pane fixed glass complete all as specified and directed.

S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S & F 125 mm size, butt hinges, extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

PART-II

Outsourcing services for day to day maintenance of all plants,Hedge, Grassprovided under Sch A Part-I by watering, taking out weeds, manuring the organic manure at regular intervals, using chemical fertilizers, spraying pesticides etc. for healty growth including trimming branches/grass to maintain proper shape etc. all as per standard gardening practice for a period of two year from the certified date of completion of entire work by employing 01 No Mali (unskilled) per day of 08 hrs duration except on Sundays and holidays complete as specified and directed. Note : Water shall be supplied by MES free of cost for maintaining the grass and plants. Contractor shall be responsible for all necessary arrangements for collection and conveyance of water from MES water supply points/ source up to 5 km from the site. Necessary water tanker with tractor,water browser ,PVC pipe,sprinkler etc required for watering purpose is the responsibility of the contractor.Manure and pesticide required for maintenance of the plant for two years shall be the resposibility of the contractor. Quoted Rates shall deemed to include for all these aspect.