Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date26 Dec 2023
Closing Date16 Jan 2024
Tender Amount₹ 44,00,000
Costs
EMD
₹ 88,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_634356_1Bid Award Id
ViewTender No
8966/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames), complete all as specified and directed.
15
-
-
S & F for soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
15
-
-
S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
4.2
-
-
M&L Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron), complete all as specified and directed.
200
-
-
M&L Powder coated (minimum thickness of powder coating is not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.
18
-
-
Supplying and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (02 No.) suitable handle (01 No.), complete all as specified and directed.
18
-
-
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm long mild steel, complete all as specified and directed.
9
-
-
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
9
-
-
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
6
-
-
S& F Aluminum Mortice lock, 4 Lever vertical type, size 100 mm, complete all as specified and directed.
10
-
-
S&F in repairs Aluminum Mortice lock, 4 Lever vertical type, size 100 mm, complete all as specified and directed.
5
-
-
S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
6.5
-
-
S & F 5.50 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares exceeding 0.5 Sq. M in each pane, complete all as specified and directed.
9.5
-
-
M&L 12 mm thick prelaminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work, complete all as specified and directed.
6.5
-
-
S & F in repair aluminium body door closer hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width, complete all as specified and directed.
4
-
-
S & F aluminium body door closer hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width, complete all as specified and directed.
10
-
-
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 including dismantling of old tiles, complete all as specified and as directed.
250
-
-
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 including dismantling of old tiles, complete all as specified and as directed.
20
-
-
Glazed ceramic coloured tiles in vertical surfaces 350x 250x 7 mm/ 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 including dismantling of old tiles, complete all as specified and as directed.
400
-
-
S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) EWC white complete incl seat and cover, flush pipe, trap including all joints, complete all as specified and directed.
3
-
-
S & F in repairsVitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.
3
-
-
S & F in repairs Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and directed.
2
-
-
S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (60 gm weight) (half or full threaded), complete all as specified and directed.
5
-
-
S & F 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
3
-
-
S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
10
-
-
S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed.
10
-
-
S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.
5
-
-
S & F in repairs PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe, complete all as specified and directed.
4
-
-
S & F in repairs 15mm dia PVC connection pipe with PTMT nuts of length 450mm, complete all as specified and directed.
10
-
-
S & F in repairs grating round 100 mm size of PTMT (min weight 25 grms), complete all as specified and directed.
5
-
-
Removing the existing roof treatment completely, roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc, Brushing the surface neat cement slurry with 3 Kg of cement per square meter and rendering 10 mm thick on roof concrete surfaces in cement mortar 1:3 by adding necessary water proofing compound and M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm, complete all as specified and directed.
Note:- The Water proofing compound shall be measured and paid separately.
300
-
-
Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed.
26.5
-
-
M&L for 75 mm thick Cement concrete type B2, 1:3:6 (using 40 mm graded granite stone aggregate) in plinth protection and finishing the concrete surface even and smooth without using extra cement, complete all as specified and directed.
300
-
-
S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including 6mm dia GI hangers including S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including applying 3 mm wall care putty and applying two coats of oil bound distember over a coat of primer including removal of old false ceiling, complete all as specified and directed.
200
-
-
Taking down cement motar plaster on brick or stone wall etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
400
-
-
M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement, complete all as specified and directed.
150
-
-
M&L 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, including adding of necessary water proofing compound, complete all as specified and directed.
Note:- The Water proofing compound shall be measured and paid separately.
250
-
-
M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, complete all as specified and directed.
185
-
-
M&L 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, complete all as specified and directed.
120
-
-
M&L for Plain cement concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) for foundation filling and mass concrete, complete all as specified and directed.
4.5
-
-
M&L PCC 1:2:4 type B2 using 20 mm graded crushed stone aggregate as in bed block, surface channel and the like including weathering , slightly rounded or chamfered angles and throating, including necessary formwork, complete all as specified and as directed.
1.5
-
-
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc, complete all as specified and directed.
50
-
-
M&L for Brick work with Fly Ash Bricks straight or curved on plan exc 6m mean radious built in CM 1:6 complete including demolition of old brick/stone masonery, complete all as specified and directed.
38
-
-
M&L for preparing new plastered surfaces and applying three coats of white wash on surfaces of walls, complete all as specified and directed.
65
-
-
M&L for preparing old decorated plaster surfaces etc and applying one coat of white wash on ceiling, complete all as specified and directed.
150
-
-
M&L for preparing old decorated plaster surfaces etc and applying one coat of white wash on walls, complete all as specified and directed.
500
-
-
M&L for preparing new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and as directed.
490
-
-
M&L for preparing old plastered wall surfaces and applying one coat of cement base paint, complete all as specified and directed.
2500
-
-
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.
270
-
-
M&L for 0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation, complete all as specified and as directed.
250
-
-
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
20
-
-
S&F in repairs rotational moulded polyethylene water storage tanks 3/multi layered ISI Marked (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position, complete all as specified and directed.
2
-
-
S&F in repairs rotational moulded polyethylene water storage tanks 3/multi layered ISI Marked (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position, complete all as specified and directed.
4
-
-
S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed, complete all as specified and directed.
2
-
-
S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed, complete all as specified and directed.
2
-
-
S&F in repairs 1.25mm laths thick Steel rolling shutters, with out ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated with push pull or manual type, complete all as specified and directed.
60
-
-
S&F in repairs 1.25mm laths thick Steel rolling shutters, with out ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle, complete all as specified and directed.
30
-
-
S & F chequered cement concrete tiles 300 x 300 x 22 to 25 mm thick, with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors over 20 mm thick cement screed bed in CM 1:6, complete all as specified and directed.
300
-
-
M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
4
-
-
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete including old paver blocks and sand, complete all as specified and as directed.
800
-
-
M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
32
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.
20
-
-
M&L Mild steel of Fe-410- W(GdeE-250) quality - B Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.
2000
-
-
M&L preparation of newly prepared steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
120
-
-
M&L preparation of newly prepared steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.
200
-
-
SCHEDULE OF CREDIT
Note :- Amount of Rs. 76,025.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements