Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Dec 2023
Closing Date18 Jan 2024
Tender Amount₹ 1,36,00,000
Costs
EMD
₹ 2,11,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_631300_1Bid Award Id
ViewTender No
82394/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish to a distance exceeding 1.50 KM and not exceeding 5.00 KM complete all as specified and as directed.
12.7
-
-
... More
Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.
21.1
-
-
... More
Taking down Chowkats or frames with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each complete all as specified and as directed.
160
-
-
... More
Taking down Chowkats or frames with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed.
80
-
-
... More
Taking down cup board shutters, shelves, etc of any description size complete all as specified and as directed.
172
-
-
... More
Taking down shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each and Refixing in the same opening after easing and adjusting complete all as specified and as directed.
10
-
-
... More
Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed.
2
-
-
... More
Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance exceeding 10 KM but not exceeding 15 KM complete all as specified and as directed.
687
-
-
... More
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 10 KM but not exceeding 15 KM complete all as specified and as directed.
1647
-
-
... More
Taking down Cast iron SWR Pipes [any size or pattern], including all fittings, heads, shoes, bends, swan-necks, etc. from any height complete all as specified and as directed.
278.3
-
-
... More
Demolition and breaking up 150mm bore drain pipes [Salt glazed ware, AC or Reinforced concrete] of any diameter set in cement mortar complete all as specified and as directed.
20
-
-
... More
Demolition and breaking up 200mm bore drain pipes [Salt glazed ware, AC or Reinforced concrete] of any diameter set in cement mortar complete all as specified and as directed.
50
-
-
... More
Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil complete all as specified and as directed.
45.2
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.
Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.
26
-
-
... More
Removal of excavated material [Soil] to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed.
12
-
-
... More
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per RM by drilling 12 mm dia holes up to 300 mm deep and 300 mm centre to centre including plugging holes complete all as specified and as directed.
123.8
-
-
... More
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed
120
-
-
... More
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.
721.6
-
-
... More
M & L for PCC 1:3:6, Type C-1, using 20 mm graded stone aggregate as in Coping, Bed plate, cill and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.
1.7
-
-
... More
M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Coping, Bed plate, cill and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.
1.5
-
-
... More
M & L for providing Precast Cement Concrete, 1:2:4, Type B1, using 20mm graded stone aggregate as in Cover slabs for drains/ manholes and setting in Cement Mortar 1:4 complete with joints to match complete all as specified and as directed.
2
-
-
... More
M & L for RCC M-30 Design Mix, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns in floors, roofs, landings, balconies,
canopies, deck slabs complete all as specified and as directed.
2
-
-
... More
M & L for RCC M–30 Design Mix, using 20mm graded stone aggregate as in shelves complete all as specified and as directed.
3.7
-
-
... More
M & L for RCC M–30 Design Mix, using 20mm graded stone aggregate as in chajjas complete all as specified and as directed.
4
-
-
... More
M & L for RCC M–30 Design Mix, using 20mm graded stone aggregate as in Fins, fascias, louvres, parapets and railings complete all as specified and as directed.
3
-
-
... More
Supply only integral water proofing compound [ISI marked] of approved make.
152
-
-
... More
M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.
16.2
-
-
... More
M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including provision of 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and as directed.
13.5
-
-
... More
M & L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.
3.3
-
-
... More
M & L Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought face from straight edge held against the dressed surface not exceeding 20mm complete all as specified and directed.
20
-
-
... More
Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] for fair finished surfaces of concrete complete all as specified and directed.
20
-
-
... More
Use and removal of steel formwork to sides and soffits shelves including supports, overhangs, etc. for rough finished flat surfaces of concrete complete all as specified and as directed.
43.2
-
-
... More
Use and removal of steel formwork to soffits of chajjas including edges for rough finished flat surfaces of concrete complete all as specified and as directed.
40
-
-
... More
Use and removal of steel formwork to sides of fins, facias, louvres, etc. for rough finished flat surfaces of concrete complete all as specified and as directed.
30
-
-
... More
S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
1
-
-
... More
S & F Factory made, 35mm thick, Second Class Hard Wood, Plain framed, Panelled Shutter [Two Panel] with Lock Rail and Panel of 9 mm BWP Commercial Ply or 12 mm Veneered Particle Board with Commercial Veneering on both faces, the size of Rail and Stile as per IS – 1003 [Part – I], Kiln Seasoned and Chemically Pressure treated and fitted to Chowkats complete all as specified and as directed.
35
-
-
... More
S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed.
35
-
-
... More
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
28.8
-
-
... More
S & F 4 mm thick, Veneered Decorative Plywood, Grade - I [with BWR resin] with Decorative Face Veneers on One Face, fixed with glue and including French polishing one or more coats on surfaces of any description, including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed.
28.8
-
-
... More
S & F factory made single rebated Wood Polymer Composite [WPC] solid door/ window Frames/ Chowkhats of size 65mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. Note: The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BoQ.
230.4
-
-
... More
S & F factory made Double rebated Wood Polymer Composite [WPC] solid door/ window Frames/ Chowkhats of size 65mm x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. Note: The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BoQ.
160
-
-
... More
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately
64
-
-
... More
S & F Factory made UPVC Sliding Window, Three Track, White Colour of area not exceeding 2.0 Sq.m, made of extruded profiles with wall thickness of 2.3mm±0.2mm, Window profile with hollow section with multi chamber, 112mm X 45mm, Sliding Sash of size 42mm X 67mm, Sliding Mesh Sash of size 42mm X 57mm, Sliding Interlock [One vertical length in each shutter] of size 45.50mm X 28mm, Glazing Bead of size 24.50mm X 16mm shall be mitred cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM Gasket, 1.2mm±0.2mm thick Galvanized Steel Frame of size 30mmx 12mm, 2 Nos, Sliding Sash of size 30mm x 18mm, Sliding Mesh Sash of size 26mm x 10mm profile to be inserted in required profile, frame shall be fixed to the wall with 8mm X 100mm long fasteners, Hardware such as Touch lock of zinc alloyed [white powder coated], Steel roller system, including all necessary accessories shall be provided with proper operative and locking hardware mechanism, frame shall be fixed to wall with high quality fasteners and silicon glue shall be applied to fill up gap between frame and wall to make leak proof complete all as specified and as per Manufacturer instructions.
Notes: (a) Net opening will be measured for payment purpose.
(b) Supply only of Wire mesh, deco grills and glass shall be measured and paid separately under relevant Items of Schedule 'A' / BoQ. The unit rate quoted by contractor shall include all other connected accessories for glazing. (c) The size of UPVC sections specified in the description of item is minimum requirement, if the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department.
107
-
-
... More
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 1.00 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and as per Manufacturer instructions. Notes:
(a) The size of UPVC sections specified in the description of item is minimum requirement. If the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department. However the acceptable tolerance limit for lesser size shall be upto minus 5%. (b) Supply only of Glass shall be measured and paid separately under relevant Items of Schedule 'A' / BoQ. The unit rate quoted by contractor shall include all other connected accessories for glazing. (c) Net opening shall be measured for payment purpose.
14
-
-
... More
S & F 18mm thick Plywood, Grade BWR, Type BB ply, fixed with screws to Wooden Frames complete all as specified and as directed.
172
-
-
... More
S & F 0.9 mm thick Decorative Laminate, Type - 1 of Surface Finish, Colour and Pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.
185
-
-
... More
S & F First Class hard wood plain, cover fillets, square, rectangular or triangular in section, bull nosed, splayed, chamfered or chamfered or rounded on one edge or face wrought, secured with screws, cross sectional area not exceeding 3 Sq.cm complete all as specified and as directed.
307.2
-
-
... More
S & F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour, articles not exceeding 200 Cu.cm each complete all as specified and as directed.
20
-
-
... More
Supply only 5mm thick Sheet Glass ordinary quality in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
79
-
-
... More
Supply only Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm complete all as specified and as directed.
50
-
-
... More
Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 10 X 10 X 1.5mm for fixing Deco Grill complete all as specified and as directed.
107
-
-
... More
S & F in repairs Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or Aluminium wire staples with new wooden beading including necessary painting to beading to match with existing surfaces complete all as specified and as directed.
20
-
-
... More
S & F 125 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed.
336
-
-
... More
S & F 100 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed.
96
-
-
... More
S & F 75 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed.
128
-
-
... More
S & F 50 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed.
20
-
-
... More
S & F Continuous [Piano] Hinges, Mild Steel, Bright finish or Electrogalvanised and width of Flaps 40mm [When Open] complete all as specified and as directed.
243.2
-
-
... More
S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.
288
-
-
... More
S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
112
-
-
... More
S & F 150mm long Aluminium anodised Handle, of extruded section Fabricated Type complete all as specified and as directed.
224
-
-
... More
S & F 100mm long Aluminium anodised Handle, of extruded section Fabricated Type complete all as specified and as directed.
64
-
-
... More
S & F 100mm long Stainless Steel Handle, of extruded section Fabricated Type complete all as specified and as directed.
64
-
-
... More
S & F 150mm long Stainless Steel Handle, of extruded section Fabricated Type complete all as specified and as directed.
128
-
-
... More
S & F 75 mm, Brass Mortice Lock with 4 Levers, vertical type with keys complete all as specified and as directed.
32
-
-
... More
S & F Magnetic Catches with Striking Plate, brass body, First quality complete all as specified and as directed.
192
-
-
... More
S & F Mild Steel Door Spring 300 mm, Ordinary Rat Rail Rod Pattern springs including roller and roller plate complete all as specified and as directed.
32
-
-
... More
S & F Mortice Night Latch, Vertical type, Zinc based die cast alloy body of size 82 mm, 7 Levers with 2 keys of Godrej Make, complete all as specified and as directed.
16
-
-
... More
S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
112
-
-
... More
S & F in repairs Decorative type Stainless Steel Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre complete all as specified and as directed.
232
-
-
... More
S & F in repairs Decorative type Stainless Steel Brackets with finial suitable for 25mm dia curtain rods complete all as specified and as directed.
100
-
-
... More
S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
880
-
-
... More
S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
380
-
-
... More
S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes, including Bolts, if required, Hooks [Stay], heavy, for Large Gates, Hook and Pintle Hinges, large Hasps and Staples, Chains, hand made Sliding Bolts, Clamps, Hold Fasts, Wall Ties, Hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed.
135
-
-
... More
S & F Mild Steel work confirming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed.
200
-
-
... More
S & F in repairs Mild Steel, Galvanised Plain Sheet, 1.00 mm thick as in covering to Gates/ door shutters, etc. cut to size, edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to steel members, etc. complete all as specified and as directed.
20
-
-
... More
M & L for roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of cold applied bituminous primer @ 0.50 KG per Sq.m, applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion complete including taking down existing Roof Treatment of any description and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
320
-
-
... More
M&L for providing roof cooling ceramic tiles of size 300 x 300 mm, 7 to 8 mm thick, conforming to IS 15622, set and jointed in cement slurry and pointed flush with epoxy mortar to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: [a] The colour/ shade/ design of tiles shall be as approved by GE.
[b] The tile joint shall be kept as 3mm using 3mm thick tile spacers and masking tape shall be provided before applying of the epoxy grout and the surplus grout materials shall be thoroughly cleaned immediately.
320
-
-
... More
M & L for applying Chemical Injection Treatment in the form of Pressure Grouting by drilling 20 mm dia holes, 60 mm deep @ 30 cm grid at bottom floor and all the internal wall surfaces of the sunken slabs of toilet by injecting Cement Slurry mixed with Grout Admixture [CONBEXTRA EP 10" of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Batik India Pvt. Ltd.] at 225 Grams for 50 KG of cement and applying a coat of Brush Bond RFX of M/s. Fosroc Chemicals or equivalent approved water proofing coating as per manufacturer's instructions complete all as required and as directed at site.
91
-
-
... More
M & L for Non Returnable Grouting Packer of 8mm dia, inserting into concrete by drilling hole of 10 mm dia in a staggared manner as directed by the engineer-in-charge including supply and injection of approved two component low viscosity epoxy grout in position, including all equipment, putty, machinery, tools as recommended by the Manufacturer and making good the surfaces complete all as specified and as directed.
Make of epoxy grout: M/s. Fosroc Chemicals/ M/s. Sika India Pvt. Ltd./ M/s. STP Ltd./ M/s. Choksey Chemicals Pvt. Ltd./ M/s Bostik India Pvt. Ltd./ M/s Asian Paints Ltd.
150
-
-
... More
M & L for drilling and fixing PVC Nozzles and injecting Polymer modified cementitious epoxy grout as required to fill the honeycombing inside the beams, columns, slabs etc. noticed after removal of loose concrete complete all as specified and as directed.
Make of epoxy grout: M/s. Fosroc Chemicals/ M/s. Sika India Pvt. Ltd./ M/s. STP Ltd./ M/s. Choksey Chemicals Pvt. Ltd./ M/s Bostik India Pvt. Ltd./ M/s Asian Paints Ltd.
200
-
-
... More
M & L for preparation of existing exposed steel surfaces free from dust, loose material, surface contamination, rust, scale, mortar, concrete, other loose and deleterious materials, materials which reduce bond or prevent suction or wetting by repair materials, delaminating, weak, damaged and deteriorated concrete by blast cleaning or other means of mechanical abrasion or suitable means, making substrata to Saturated Surface Dry [SSD] with no standing water and applying cement-based epoxy modified three-component anti corrosive coating and bonding slurry as per manufacturer's instructions as in rebar corrosion protection system including all necessary formwork, scaffolding and safety measures complete all as specified and as directed. Make of Bonding Agent: Friazinc R of M/s. Sika India Pvt. Ltd. or equivalent approved bonding agent in M/s. Fosroc Chemicals or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd./ M/s Asian Paints Ltd.
45
-
-
... More
M & L for cleaning the existing exposed concrete surfaces and applying Bonding Agent i.e. Sikadur-32 / Sikadur-32 LP of M/s. Sika India Pvt. Ltd. or equivalent approved bonding agent in M/s. Fosroc Chemicals or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions to create structural bonding between old concrete surface and new concrete including all necessary formwork, scaffolding and safety measures complete all as specified and as directed.
200
-
-
... More
M & L for Cleaning the existing exposed reinforcement of slab, beam, column, footing etc. and any other RCC structural member by emery paper, providing two coats of Single Component Rust Removal And Rust Inhibition Liquid including all necessary formwork, scaffolding and safety measures complete as per manufacturer's instructions, as specified and as directed. Make of Rust Removal And Rust Inhibition Liquid: Sika Rustoff 100 of M/s. Sika India Pvt. Ltd. or equivalent approved rust remover/ Preventer in M/s. Fosroc Chemicals or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd./ M/s Asian Paints Ltd.
45
-
-
... More
M & L for applying Polymer Modified Mortar made using Shrinkage Compensated Polymer Modified Fibre Reinforced Cementitious Repair Mortar such as Renderoc SP 40 of M/s. Fosroc Chemicals India [P] Ltd. or equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions to form average 25 mm thick even surface complete all as specified and as directed.
200
-
-
... More
M & L for Non-Shrink, Cementitious Micro Concrete using Rendroc RG' manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturer's instructions, laid as in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturer's instructions including providing double scaffolding and safety measures as required and as specified. [Note: Measurement shall be considered for circumference at centerline of core thickness]
5
-
-
... More
M & L for providing additional reinforcement using High Strength Corrosion Resistant Deformed Bars of Grade Fe–500D by checking the diameter of the existing bars, cutting the necessary main reinforcement to the required length with proper development length, tying and binding with 16 SWG black soft annealed binding wire / welding where required / lapping / anchoring with the existing shear connectors / reinforcement so that the additional reinforcement acts monolithically with the existing reinforcement and core concrete complete all as specified and as directed. Note: The shear reinforcement shall also be provided as specified here-in-above in the form of 2 "U" shaped bars if existing shear reinforcement is found deteriorated / diameter of the bars is reduced to form a rigid cage and placing with proper cover block, supports, chairs, spacers etc. Diameter of the new bar shall be equal to the existing bars. Additional reinforcement shall be provided only in case the diameter of the existing bars is found less than 25% of the original diameter.
500
-
-
... More
Notes for Serial Item No. _81 to 89: [a] The work of structural rehabilitation shall be got carried out under the supervision and guidance of structural consultant who carried out the NDT and submitted report [Andhra University, Visakhapatnam]. A certificate from consultant shall be obtained by the contractor to the effect that work of structural rehabilitation has been carried out under their strict supervision and the same shall be submitted by the contractor to GE.
[b] The work shall be got executed through the manufacturer or through their authorised applicators only. [c] The contractor shall also obtain a written guarantee for effectiveness for a period of 5 [Five] Years from the certified date of completion of entire work from the manufacturer and submit the same to GE before claiming payment. [d] Rates quoted are deemed to be including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material distance exceeding 10 KM but not exceeding 15.0 KM complete all as specified and as directed and Nothing shall be paid extra on this account.
-
-
-
... More
M & L for PCC 1:5:10, Type E-2, using 40mm graded stone aggregate as in sunken floor fillings, Mass concrete, etc complete all as specified and as directed.
25
-
-
... More
M & L for 25 mm average thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in levelling course over sub base, surface finished even and fair to receive topping layer complete all as specified and as directed.
1370
-
-
... More
M & L for Non Skid Ceramic Tiles, Edge cut, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 8 mm thick [Square or Rectangular] as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Notes: [a] The colour / shade / design of tiles shall be as approved by GE.
[b] The tile joint shall be kept as 3mm using 3mm thick tile spacers and masking tape shall be provided before applying of the joint filler and the surplus grout materials shall be thoroughly cleaned immediately.
75
-
-
... More
M & L for Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 8 mm thick [Square or Rectangular] on Vertical Surfaces such as Skirting, Dado, etc. set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Notes: [a] The colour / shade / design of tiles shall be as approved by GE.
[b] The tile joint shall be kept as 3mm using 3mm thick tile spacers and masking tape shall be provided before applying of the joint filler and the surplus grout materials shall be thoroughly cleaned immediately.
612
-
-
... More
M & L for Non Skid Ceramic Tiles, Edge Cut, Coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 8 to 9 mm thick [Square or Rectangular] as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Notes: [a] The colour / shade / design of tiles shall be as approved by GE.
[b] The tile joint shall be kept as 3mm using 3mm thick tile spacers and masking tape shall be provided before applying of the joint filler and the surplus grout materials shall be thoroughly cleaned immediately.
850
-
-
... More
M & L for Non Skid Ceramic Tiles, Edge Cut, Coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 8 to 9 mm thick [Square or Rectangular] on Vertical Surfaces such as Skirting, Dado, etc. set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Notes: [a] The colour / shade / design of tiles shall be as approved by GE.
[b] The tile joint shall be kept as 3mm using 3mm thick tile spacers and masking tape shall be provided before applying of the joint filler and the surplus grout materials shall be thoroughly cleaned immediately.
100
-
-
... More
S & F Rigid PVC corner beading, not exceeding 15mm girth, cut to required length, fixed at corner junctions of wall tiling complete all as specified and as directed.
160
-
-
... More
M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.
24
-
-
... More
M & L for Marble Stone Slabs of 18 to 20 mm thick of Green Colour, Premium quality, as in Flooring, Treads and Risers of Steps, Landings of Staircase etc. with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, slabs shall be of design / pattern as directed, including inlays, borders, margins, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious joint filler to match the shade of the Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed.
Note: Single stone slab shall be used for entire width of Steps, Risers & Landing etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.
162.3
-
-
... More
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:3, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
91
-
-
... More
M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.
361
-
-
... More
M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
555
-
-
... More
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4 and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.
26
-
-
... More
M & L for rendering to Stone masonry surfaces/ other than fair faces of brick work, 15 mm thick in Cement Mortar 1:6 and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.
26
-
-
... More
M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacturers instructions over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.
Note: Water proofing compound will be measured and paid separately.
732
-
-
... More
M & L for removing Plants with roots by chipping Walls / Beams / Junctions of Vertical Stacks / Water Supply lines or at any other location as directed, applying recommended chemical to prevent growth or plants and making good the disturbed portion with Cement Mortar 1:3 or with PCC 1:2:4, Type B0 [using 12.5 mm graded aggregate] and painting the surfaces to match with existing treatment / finishes and removing debris to a distance exceeding 1.50 KM but not exceeding 5.00 KM complete all as directed.
250
-
-
... More
M & L for preparing newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed.
50
-
-
... More
M & L for preparation of old decorated surfaces of walls, pillasters, etc. including brooming down or steel wire brushing and applying one coat of white wash on wall complete all as specified and as directed.
200
-
-
... More
M & L for preparing newly plastered ceiling surfaces by using vaccume based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling surfaces complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
361
-
-
... More
M & L for Complete removal of existing treatment of any description on ceiling surfaces by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on ceiling surfaces complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
875
-
-
... More
M & L for preparing newly plastered wall surfaces by using vaccume based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
555
-
-
... More
M & L for Complete removal of existing treatment of any description on wall surfaces by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.
Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.
2550
-
-
... More
M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on newly plastered walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surface complete all as specified and as directed.
Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering through their authorised applicators before commencement of the work to GE for approval.
732
-
-
... More
M & L for Complete removal of existing treatment of any description on walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections by using vaccume based sanding machine, removal of nails including rubbing with sand paper to obtain a smooth surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty complete all as specified and as directed.
Note:- The contractor shall carryout Weather proof Exterior Emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof Exterior Emulsion Painting through their authorised applicators before commencement of the work to GE for approval.
1450
-
-
... More
M & L for Two coats of synthetic enamel paint on old painted wooden surfaces of any description not other wise described over 10 cm width or girth including necessary preparation of surfaces complete all as specified and directed.
83.2
-
-
... More
M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
200
-
-
... More
M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
40
-
-
... More
M & L for Writing letters or figures [Block, Roman, Italic or Indian] not exceeding 30 cm high complete all as specified and as directed.
32
-
-
... More
S & F Rotational Moulded Polythene [HDPE] Water Tanks, Double Layered, ISI Marked, Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including dismantling and taking out existing unserviceable PVC tanks of any description and capacity complete all as specified and as directed.
16
-
-
... More
S & F in repairs Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe etc complete all as specified and as directed.
16
-
-
... More
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.
2
-
-
... More
S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.
16
-
-
... More
S & F 20 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc., concealed in walls/ ceiling including testing, taking down of existing unserviceable GI pipes and connections of any description complete all as specified and as directed.
Note: The rate quoted shall be deemed to include the cost of cutting chases of suitable size and making good.
202.4
-
-
... More
All as described in item No. 122 herein before but 25 mm outer diameter CPVC Pipes
152.4
-
-
... More
All as described in item No. 122 herein before but 40 mm outer diameter CPVC Pipes
42
-
-
... More
All as described in item No. 122 herein before but 50 mm outer diameter CPVC Pipes
27
-
-
... More
S & F in repairs Bib Taps, 15 mm dia, Brass Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified and as directed.
64
-
-
... More
S & F in repairs Stop Valves/ Angle cocks, 15 mm bore dia of pipe, cast copper alloy, Chromium Plated, Fancy Type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and as directed.
64
-
-
... More
S & F in repairs Wall mixer, 15mm dia, Single Lever cast copper alloy, chromium plated Hot and Cold with provision for connection to Overhead Shower complete with 115mm long bend pipe, connecting legs & wall flange complete [excluding hand & overhead shower] as per Jaquar Catalogue No. SOL-6273UPR or its equivalent in Kohler / Cera / Parryware/ Prayag complete all as specified.
16
-
-
... More
S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified.
16
-
-
... More
S & F in repairs Health Faucet, ABS body, including 1.25 m long flexible tube, ABS wall hook, non return valve complete all as specified.
16
-
-
... More
S & F in repairs Two way Bib Cock, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified.
16
-
-
... More
S & F in repairs Overhead shower rose of size 125mm, with or without swivel joints, fixed to CPVC pipe complete all as specified and as directed.
16
-
-
... More
S & F in repairs Stainless Steel, Soap Dish, Fancy Type complete all as specified.
16
-
-
... More
S & F in repairs Stainless steel Towel ring Fancy type complete all as specified.
16
-
-
... More
S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.
16
-
-
... More
S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC Connection of PTMT complete all as specified and as directed.
16
-
-
... More
S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.
16
-
-
... More
S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed.
16
-
-
... More
S&F in repair Glass Shelf of size 450 x 150mm with 5mm thick toughened glass and brass CP railings/ cage, fixed to wall CP brackets complete all as specified and as directed.
16
-
-
... More
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in trenches or in floors complete all as specified and as directed.
32
-
-
... More
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in trenches or in floors complete all as specified and as directed.
32
-
-
... More
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., complete all as specified and as directed.
53.6
-
-
... More
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., complete all as specified and as directed.
160.8
-
-
... More
S & F 75 mm bore PVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.
32
-
-
... More
S & F 110 mm bore PVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.
8
-
-
... More
S & F 75 mm bore PVC [SWR] bends, any radius with access door including jointing with solvent cement complete all as specified and as directed.
8
-
-
... More
S & F 110 mm bore PVC [SWR] bends, any radius with access door including jointing with solvent cement complete all as specified and as directed.
24
-
-
... More
S & F 75 mm bore PVC [SWR] branch piece, Single [Single "Y"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
24
-
-
... More
S & F 110 mm bore PVC [SWR] branch piece, Single [Single "Y"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
8
-
-
... More
S & F 75 mm bore PVC [SWR] branch piece, Single [Single "Y"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
8
-
-
... More
S & F 110 mm bore PVC [SWR] branch piece, Single [Single "Y"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
8
-
-
... More
S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
12
-
-
... More
S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
36
-
-
... More
S & F in repairs PVC [SWR] Floor Trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.
64
-
-
... More
S & F in repairs Stainless steel kitchen sink with draining board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
16
-
-
... More
S & F in repairs Stainless Steel Kitchen Plate Rack of size 600x900x250mm, made of 1.00mm thick stainless steel sheet including taking down of existing unserviceable stainless steel plate rack of any size and description complete all as directed. [Make: Prayag / Nirali / Jayna / Blue star]
16
-
-
... More
M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.
20
-
-
... More
M & L for concrete bed to drain pipes of size 200 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.
50
-
-
... More
Supply and Laying of DWC structured wall polyethylene piping systems for non- pressure drainage and sewerage pipes with non smooth external surfaces and smooth internal surfaces, 150 mm inner dia in any length, Type-B, Stiffness class of pipes SN 8 complete all as per IS 16098 (Part-2): 2013, laid in trenches, jointed complete all as specified and as directed by Engineer-in-Charge.
20
-
-
... More
Supply and Laying of DWC structured wall polyethylene piping systems for non- pressure drainage and sewerage pipes with non smooth external surfaces and smooth internal surfaces, 200 mm inner dia in any length, Type-B, Stiffness class of pipes SN 8 complete all as per IS 16098 (Part-2): 2013, laid in trenches, jointed complete all as specified and as directed by Engineer-in-Charge.
50
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and as directed.
2
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200 mm dia of pipe complete all as specified and as directed.
2
-
-
... More
Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed.
622
-
-
... More
Taking down carefully submain wiring of any description and size complete including wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed.
440
-
-
... More
Taking down MCCB DBs, MCB DBs, SPN / TPN Enclosures including MCCBs, MCBs etc of any description and any capacity and making good the disturbed surfaces all as per existing complete all as specified and as directed.
18
-
-
... More
M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, Two runs, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Metal GI Flush Box of suitable size and thickness including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point complete all as specified and as directed.
408
-
-
... More
All as per Serial Item No. 166 above but One light point controlled by 2 Nos of Two way switches complete all as specified.
6
-
-
... More
All as per Serial Item No. 166 above but one 3 Pin Socket Outlet 6 Amps on independent board, complete all as specified.
64
-
-
... More
All as per Serial Item No. 166 above but One 3 Pin Socket Outlet 6 Amps on same Board complete all as specified.
64
-
-
... More
All as per Serial Item No. 166 above but one 3 Pin Socket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.
48
-
-
... More
All as per Serial Item No. 166 above but one 3 Pin Socket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.
32
-
-
... More
S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed.
520
-
-
... More
S & F Switch Modular type, one module, Single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed.
48
-
-
... More
S & F Switch, Modular Type, One Module, Single Pole, Two Way, 6 Amps, 230 Volts complete all as specified and as directed.
12
-
-
... More
S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts, complete all as specified and as directed.
128
-
-
... More
S & F Socket Outlet, 3 pin, 16 Amps cum 3 pin 6 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.
48
-
-
... More
S & F Bell Push, Modular type, one module, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed.
16
-
-
... More
S & F Bell, Ding Dong / Multi Music Type, AC, 230 Volts, Single Pole complete all as specified and as directed.
16
-
-
... More
S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed.
64
-
-
... More
S & F Ceiling Rose, PVC Body, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed.
302
-
-
... More
S & F TV Socket / Outlet, Co-Axial, Deluxe, Modular Type, One Module including suitable Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet, Modular type Base / Grid Frame & Cover Frame complete all as specified and as directed.
16
-
-
... More
S & F Rigid non-metallic 20 mm dia PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducer, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hook etc. complete all as specified and as directed.
120
-
-
... More
M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit.
128
-
-
... More
M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit.
192
-
-
... More
M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit.
120
-
-
... More
S & F MCCB DB, VTPN, 4 Way, 415 Volts with DIN Channel, N3 Frame, Double Door with 250 Amps rated bus bar suitable for mounting MCBs and provision for MCCB as incomer complete all as specified and as directed.
2
-
-
... More
S & F MCB DB, SPN, 12 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.
16
-
-
... More
S & F MCB, SPN, 6 to 32 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed.
16
-
-
... More
S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 240 Volts, 50 Hz complete all as specified and as directed.
184
-
-
... More
S & F MCCB 415 V , 16 KA, 4 Pole, 100 Amps capacity complete all as specified and as directed.
2
-
-
... More
S & F in repairs SP&N Enclosure with 2 Pole and Earth Metal Plug & Socket, with and including One MCB, SP&N/ DP, 20 Amps, 240 Volts complete all as specified and as directed.
32
-
-
... More
S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1000 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed.
Note: Light fitting shall be of PF0.95
22
-
-
... More
S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 2000 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF0.95
144
-
-
... More
S & F in repairs Energy efficient & Long life Security Light Luminaire, 35 Watt with Pressure die-cast Aluminium housing, IP 65 Protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 2.00 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF0.95
10
-
-
... More
S & F in repair Integrated LED Bulk head with luminaire, of not less than 900 Lumens output, 5700 K with Pressure Die Cast Aluminium Housing, IP65 protection, heat resistant glass cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF0.95
18
-
-
... More
S & F in repairs LED Bulb of not less than 900 Lumens output, 3000 K, IP40 operating voltage 90-270 Volts, AC, 50 Hz, Natural white colour complete all as specified and as directed.
32
-
-
... More
Taking down Light Fittings of any description and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including cleaning and minor repairs complete all as specified and as directed.
80
-
-
... More
Taking down Electric Energy Meter of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up complete all as specified and directed.
16
-
-
... More
M & L for two coats of synthetic enamel painting the existing MS Switch Box of size 90 x 600 x 150mm including necessary preparation of surfaces all as specified and as directed
16
-
-
... More
S & F Exhaust Fan, 250mm Sweep, 1400 RPM, PVC Body, Heavy Duty, with Double Ball Bearing, Conforming to IS - 2312, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter/ Grill, BEE 5 Star Rated and of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and fixing in existing opening and making good the disturbed surface to match including taking down existing unserviceable exhaust fans of any description and size and depositing into MES stores complete all as specified and as directed. Make: Crompton Greaves / Havells / Almonard / Bajaj / Orient
16
-
-
... More
S & F in repairs Stationary Louvers suitable for Exhaust Fan of 300mm sweep made out of powder coated aluminium anodized sheet of minimum 1 mm thick with non removable blades fixed permanently at 45 degree angle for protection from rain including aluminium wire mess for protection of birds complete all as specified and as directed.
16
-
-
... More
M & L for Taking down Exhaust Fan of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm, cleaning, greasing etc and replacement of Spares such as Capacitor 4 Mfd, Nuts & Bolts, washers, etc. including cleaning, greasing and spray painting with two coats of synthetic enamel paint of approved colour over a coat of zinc chrome primer after filling cavities with filler and complete all as specified and directed.
16
-
-
... More
M & L for Taking down Ceiling Fan of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm, replacement of Spares such as Capacitor 2.5 Mfd, Bearings, Shaft Bushes, Capacitor, Cotter Pin, Clamps, Rubber Bushes, Nuts & Bolts etc. as required and also including cleaning, greasing and spray painting with two coats of synthetic enamel paint of approved colour over a coat of zinc chrome primer after filling cavities with filler and complete all as specified and directed.
64
-
-
... More
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25 Sq. mm x 4 Core as in service connections complete all as specified and as directed.
95
-
-
... More
M & L for Bricks, common burnt clay building bricks, sub–class "B", designation 75 in trenches for cable protection complete all as specified and as directed.
500
-
-
... More
M & L for Dry river sand cushioning over and around the cable for cable protection in trenches, leveled and punned down complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.
7
-
-
... More
S & F in repairs Single Pointed Air Termination Aluminium Rod 12 mm dia and 300 mm long including necessary fasteners fixed for Lighting Protection with necessary connections to earthing etc complete all as specified and as directed.
16
-
-
... More
S & F in repairs Aluminium Strip of size 25 X 3.15 mm, fixed to walls / columns / beams etc with Saddles or porcelain blocks of 10mm thick spaced at 1.00m centre to centre including making grooves and fixing with brass screws etc. for roof conductors and down conductors above ground complete all as specified and as directed. Note: Hylam sheet block shall be in two pieces each 10mm thick, one fixed to base with brass screws and the other fixed over it with brass screws after fixing aluminium strip in the groove provided.
140
-
-
... More
S & F in repairs Earth continuity conductor or main earthing lead made of GI Strip of size 32 X 6mm, fixed to wall on batten or recess or chases or burried in ground or fixed to poles or any other indicated situation including drawing through GI Pipe for earthing etc. complete all as specified and as directed.
20
-
-
... More
S & F in repairs Test Point Terminal Box of size 175 X 150 X 100mm made out of 2mm thick hot dip galvanised sheet, drilled and screwed including 6 Nos 15mm long hexagonal head screws, painting with two coats of specified color over a coat of red oxide zinc chrome primer complete with Test Point Terminal Block made of Gun Metal or Phosphorus Bronze of size 75 X 75 X 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw complete all as specified and as directed.
4
-
-
... More
Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed.
4
-
-
... More
Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. including taking down of existing earthing set complete all as specified.
4
-
-
... More
Note for Serial Item No. 1 to 212 : The work shall be carried out up to G+3Floors/ Four Storey and the rates quoted shall be deemed to be inclusive of providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed. Nothing shall be paid extra on this account.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements