Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Drainage Work
Eprocure
Opening Date17 Nov 2023
Closing Date16 Dec 2023
Tender Amount₹ 50,00,000
Costs
EMD
₹ 1,00,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_628648_1Bid Award Id
ViewTender No
8315/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for Virified Ceramic tiles double charged 8 - 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 15 mm thk cement screed bed in cm 1;4 complete all as specified and as directed.
150
-
-
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4.
50
-
-
M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes complete all as specified and as directed.
125
-
-
Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.
10
-
-
Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed.
10
-
-
Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each
10
-
-
Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.
10
-
-
S&F 2nd class hard wood as in plain straight chowkat and frames wrought framed rebeared on the solid rounded or charmfered but together with glue pinned at joints,etc complete all as specified and as directed
0.25
-
-
M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
20
-
-
Supply and fixing 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed.
10
-
-
Supply and fixing 2nd class HW 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed.
6
-
-
Supply and fixing factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.
10
-
-
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.
1
-
-
Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated / powder coated ( base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm / Sqm ) with total thickness of coating 0.58 mm finished painted with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder up to 50-60 microns thick outer frame section 72 mm x 55 mm, centre mullion section 72 mm x 50 mm, shutter section 47 mm x 20 mm, fly mesh section 40 mm x 20 mm and the fixed glass beading section 12 mm x 12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars / grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel ( 304 grade ) mesh for fly mesh shutter fitted with EPDM ( Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete / stone or brick masonary wall by means of self expanding screws, including 10 mm square bars welded to 6 mm x 12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege.
Make: M/S Ashwani & Sons, E-15 patel nagar -II Gaziabad (UP),NCL Alltek & Seccolar Ltd or any other manufacturer approved by E-in-Branch
15
-
-
S&F for anodised three track aluminim sliding window and vendiletor frame made up 62 mm /29.5mm 1.5 mm thick aluminium section & shutter made pu 38mm/20mm/1.5mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings ,suitable alumn handle and locking arrangment etc as directed by engr-in-charge.
12
-
-
Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 20 X 12 X 1.5mm for fixing Deco Grill complete all as specified and as directed.
12
-
-
Easing of door shuttrs window shutters kitchen cupboard shutters show case shutter drawers incl fixing of screws for easy closing / operning and tightening of hinges or changing the position of hinges adjustment of tower bolts with new screws etc complete all as specified and directed.
20
-
-
S&F for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.
25
-
-
S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.
7.5
-
-
Supply & fixing for frosted glass / tined glass 4.8 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.
5
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
10
-
-
Supply & fixing Sheet glass 4mm thick,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each inculding hackinng out old broken glass complete all as specified and directed.
18
-
-
S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
15
-
-
S & F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
50
-
-
S&F for drapery rods (curtain rods) of 25 mm outer diameter, designed on electric resistance welded mild steel pipe having a corrugated virgin PVC extrusions reinforced to minimize friction and eliminate scratches with colour matching brackets and finials etc. of approved colour /shade/design wherever necessary with anchoring arrangements complete all as specified and as directed.
100
-
-
S&F for butt hinges 75 mm long medium weight, cold rolled stainless steel complete all as specified and directed.
15
-
-
S&F in repairs MS butt hinges of 75 mm size cold rolled stainless steel medium weight, ISI marked complete all as specified and directed.
5
-
-
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section.
10
-
-
S&F in repair 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
5
-
-
Supply and fixing 125 mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
10
-
-
Supply and fixing in repairs 125 mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
5
-
-
S&F butt hinges 100 mm long medium weight, cold rolled stainless steel complete all as specified and directed.
30
-
-
S&F in repairs MS butt hinges of 100 mm size cold rolled stainless steel medium weight, ISI marked complete all as specified and directed.
5
-
-
S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
10
-
-
S & F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
5
-
-
Supply and fixing 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.
20
-
-
Supply and fixing in repairs 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.
5
-
-
S & F for 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
5
-
-
S & F in repairs 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
5
-
-
Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
20
-
-
Supply and fixing in repairs 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
5
-
-
Demolition of cement concrete in reinforcement and in any position not otherwise specifically provided complete all as specified and directed.
1.5
-
-
M&L for Granite (of any type) tiles 18-20mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing ncluding 15 mm thick screed bed in cement sand mortar 1:4 complete all as specifed and directed by EIC.
5
-
-
M& L for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations
30
-
-
Demolition Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
6.15
-
-
M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.
5
-
-
M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4
10
-
-
Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified .
600
-
-
Rendering 10mm thick on fair faces of brick work or concrete surfacesin cement mortar 1:6 and finishe even and smooth without using extra cement complete all as specified and as directed.
200
-
-
M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% complete all as specified and directed.( Note :Water proofing compound shall be measured and paid separatel)
300
-
-
Supply only integral water proofing compound complete all as specified and directed.
84
-
-
M&L for 5mm rendering thick in CM (1:3) on ceiling sufaces, finished even & smooth (without using extra cement), complete all as specified and directed.
100
-
-
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed.
200
-
-
M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed.
500
-
-
M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of oil bound distemper complete all as specified and directed.
2500
-
-
M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of oil bound distemper complete all as specified and directed.
100
-
-
M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.
100
-
-
M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.
200
-
-
M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.
200
-
-
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
300
-
-
M & L for preparing old surface and appllying one coats of weather proof exterior paint and including filling of holes and cracks with putty on wall complete all as specified and directed.
2000
-
-
M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of cement base paint complete all as specified and directed.
500
-
-
M&L preparation of old steel surfaces and applying one coats of synthetic enamel paint of any description over 10 cm width and girth complete all as specified and directed.
150
-
-
M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed.
250
-
-
M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed.
150
-
-
M & L for preparation new or prevously untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
120
-
-
Removing the existing roof treatment completely, Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
250
-
-
Brushing neat cement slurry with 3.0kg of cement per sq. Metre
250
-
-
Material & labour for rendering 15 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. (Note;- water proofing compound shall be measured and paid separately as supply only)
250
-
-
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces forced application complete all as specified.
250
-
-
M&L for preparation of new surfaces of any description, over APP based polymeric membrane and applying one coat of aluminum paint , complete all as specified and directed.
250
-
-
S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) EWC white complete incl seat and cover, flush pipe incl all joints complete.
2
-
-
S&F in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and direrected.
2
-
-
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.
2
-
-
S &Fixing in repairs Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws.
2
-
-
S&F for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe
10
-
-
S&F in repair 32mm PVC pipe for waste fitting,brass , CP for glazed ware sinks,basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixedcomplete all as specified.
5
-
-
S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe.
5
-
-
S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
5
-
-
S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
5
-
-
S & F in repairs 15 mm bore chromium plated twin one bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
5
-
-
S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed
5
-
-
S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.
2
-
-
S&F in repair stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges.
5
-
-
S/F in repairs PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed.
5
-
-
S&F in repairs 15mm dia PVC connection pipe with PTMT nuts of length 450mm all as directed incl taking down old one.
10
-
-
S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms).
5
-
-
S&F in rotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified
5
-
-
S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified.
3
-
-
S&F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified
2
-
-
S&F in repairs stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets andover all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete as specified and directed.
3
-
-
Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
50
-
-
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
150
-
-
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
50
-
-
Supply and laying for 16mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed.
50
-
-
Supply and laying for 20mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed.
150
-
-
Supply and laying for 25mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed.
50
-
-
Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) .
100
-
-
S&F 110 mm dia PVC (SWR) pipes single cocketed , in any length , in rubber ring joints fixed in walls.
100
-
-
S&F 110 mm dia bore PVC (SWR) bends .
20
-
-
S&F 110 mm PVC (SWR) junction single(Single T) equal or unequal with access doors.
12
-
-
S&F 110 mm PVC (SWR) vent cowl
5
-
-
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed
20
-
-
S&F 75 mm dia of PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as specified and directed.
5
-
-
S&F 75 mm size PVC(SWR) bends any radius complete all as specified and directed
10
-
-
S&F 75 mm PVC (SWR) junction single(Single T) equal or unequal with access doors.
7
-
-
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
3
-
-
S&F Roof trusses (framed) trussed purlines, crane gantries, rails and fastenings and heavy brackets framing (beam, Tee, angle, channel or flat sections)of Fe-410-W(Gde-E-250) quality B including distance pieces, cleats etc complete all as specified and directed.
300
-
-
S & F pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and a directed by Engineer-in-Charge.
100
-
-
M&L for Excavation for post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for soft / loose soil complete all as specified and directed.
10
-
-
M&L for plain Cement Concrete type C2 1:3:6 (40mm graded aggregate) as in foundation filling or in mass concrete.
5.5
-
-
S & F framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging
door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
143
-
-
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.
41
-
-
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever equired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
100
-
-
S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of gin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of lasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and as directed.
25
-
-
S & F 18 mm thick Wood Plastic Composite (WPC) boards with one side decorative lamination & other side balancing lamination fabricated using adhesive and all required brackets, screws etc. as in shutters including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer instructions as specified and as directed.
20
-
-
S & F 18 mm thick Wood Plastic Composite (WPC) boards, plain white fabricated using adhesive and all required brackets, screws etc. solid board plain, for shelf / partition including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer instructions as specified and as directed.
10
-
-
Supply and fixing for 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed.
15
-
-
Supply and fixing in repair 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed.
5
-
-
S&F for 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified.
10
-
-
S&F in repair 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified.
5
-
-
S & F for 100mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
10
-
-
S & F in repair 100mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
5
-
-
S & F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as spd
55
-
-
S&F for magnetic PVC catcher for kitchen/shelve cup board complete.
30
-
-
M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same
100
-
-
M&L for cutting out cracks to V-section in existing tile floor , cleaning
out, wetting, grouting with cement and sand slurry 1:3 mixed with water proofing compound @ 3% by weight of cement including joint filling for sealing compound as per manufacture
150
-
-
S&F for Stalinless steel basket of 420mmX485mmx100mm with external width of 475 mm in cutlery, cup and saucer basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30 mm C/C and fixed to PVC kitchen cabinets with necessary fixing arrangments and sliding facilities complete all as specified and as directed. Make of SS Basket : Goderaj interio / Johnson Kitchens / Kohler
2
-
-
S&F for stainless steel two shelf bottle rack of size 200mmX485mmX420mm with external width 200mm as in spice jar, bottles,glass jar ect.plain wire basket ect to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. Make off SS Basket : Godrej interio / johnson kitchens / Kohler
2
-
-
S&F for Stainless steel basket of size 470mmX485mmX200mm with external width 475mm as in thali, plain wire basket ect to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. Make of SS Basket : Godrej interio / johnson kitchens / Kohler
2
-
-
S&F for Stainless steel basket of size 370mmX 585mmX150mm with external width 475mm, plain wire basket ect kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. Make of SS Basket : Godrej interio / johnson kitchens / Kohler
2
-
-
Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep for foundations, etc and getting out in soft/loose soil complete all as specified and directed.
200
-
-
Excavation in trenches not exc 1.5m wide and exc 1.5 m and not exceeding 3.00 m deep for foundations, etc and getting out in soft/loose soil complete all as specified and directed.
30
-
-
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thickness as in soil complete all as specified and directed.
175
-
-
Removing excavated material /soil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
55
-
-
Cleaning and removing all scale and dirt, etc, from PVC and RCC water tanks of capacity 250 to 500 Litres and from mouths of circulating pipes, etc including washing the tank with clean water and applying bleaching powder after removing scales, dirt complete all as specified and directed by the Engineer-in-Charge.
160
-
-
Cleaning and removing all scale and dirt, etc, from PVC and RCC water tanks of capacity 500 to 1000 Litres and from mouths of circulating pipes, etc including washing the tank with clean water and applying bleaching powder after removing scales, dirt complete all as specified and directed by the Engineer-in-Charge.
260
-
-
Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc and removing the debris outside of MOD land complete all as specified and directed.
285
-
-
M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing compound @ 2% by weight of cement, finished even and smooth with out using extra cement complete all as directed.
285
-
-
Demolition of brick work built in cement mortar and removing from site of works complete all as specified and as directed.
34.77
-
-
M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 for manholes etc complete all as specified and as directed.
25
-
-
M&L brick work with fly ash bricks,straight or curved on plan to any radius in half brick wall built in CM (1:4) all as specified and directed
85
-
-
M&L for brick work with fly ash bricks laid on edge on top surfaces of drains, bedded & jointly in cement mortar (1 : 4) and pointed in cement mortar (1:3) complete all as specified and directed.
130
-
-
M & L for racking out loose brick work joints as in inside vertical inclined surfaces of bricks drains, laid flat and flush pointed the same in cement mortar (1:4) complete all as specified and directed.
6
-
-
M & L for racking out loose brick work joints as in top horizontal surfaces of bricks drains, laid on edges flush pointed in cement mortar (1:4) complete all as specified and directed.
6
-
-
M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified and directed.
45
-
-
M&L in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 150 x 100 mm with necessary fittings complete all as specified as directed.
15
-
-
S&F in repair for cast iron work grade FG 150, for articles not exceeding 5 kg each unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles etc complete all as specified and directed.
100
-
-
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 100mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed.
165
-
-
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed.
165
-
-
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed.
65
-
-
M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes 100 mm bore including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
100
-
-
M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes 150 mm bore including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
165
-
-
M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes 200 mm bore including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
65
-
-
S&F 150mm internal dia of einforced concrete pipes, class NP3, laid and jointed complete with collar all as specified
100
-
-
S&F 150mm internal dia of einforced concrete pipes, class NP3, laid and jointed complete with collar all as specified
165
-
-
S&F 200 mm internal dia of reinforced concrete pipes, class NP3, laid and jointed complete with collar all as specified
65
-
-
M&L for repairs holes of rat/mouse to manholes faces/surfaces by making good to wall, PCC benching, drains, channel etc, of section area not exc 150 Sqcm each and depth not exc 25cm each and filling the same with PCC (1:2:4) type B-1 with using 20mm graded stone aggregates and finishing to the surfaces complete all as specified and as directed.
200
-
-
Taking down CI/PVC/AC soil pipe from wall, treches of any description including fittings.
100
-
-
S & F 110mm bore PVC (SWR) soil, waste or rain water pipes single socketed in any length with rubber ring joints fixed to walls with and including MS flai iron rings 40 mmX6 mm etc complete all as specified and directed.
100
-
-
S & F in repair 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
15
-
-
S & F in repair for PVC (SWR) bends any radius 110mm bore with oval access door complete all as specified and directed.
35
-
-
S & F in repair for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
20
-
-
S & F in repair for 110mm bore PVC (SWR) branch piece double, (double Y) equal or unequal with acess door complete all as specified and directed.
15
-
-
Supply only liquid water proofing compound complete all as specified and directed.
35
-
-
M & L 100mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B 1 (1:2:4) using 20 mm graded crushed stone aggregate complete all as specified and directed.
30
-
-
S & F in repair grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and directed.
25
-
-
S&F in repair 32mm dia PVC waste pipe for urinal/kitchen sink/WHB including CP waste coupling 32mm dia including taking down old existing pipe complete all as specified and as directed.
30
-
-
Supply & fixed in repair, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe)complete all as specified and as directed.
5
-
-
Supply & fixed in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and as directed.
5
-
-
Demolition of plain cement concrete of any description and in any position as per direction.
19
-
-
M & L for PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete including demolition of old concrete complete all as directed.
5
-
-
M & L for PCC 1:2:4, type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains etc including demolition of old concrete complete all as directed.
14
-
-
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for all complete as specified and as directed.
5
-
-
M & L for Precast RCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manholes), shelves including necessary formwork, and the like and set in CM 1:4 etc complete all as specified and directed.
5
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
1
-
-
S & F mild steel work as in hand rails, wind ties, fencing posts and struts, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, securing bolts, posts and struts in fencing, etc and similar work conforming to FE-290 Gde E-165
100
-
-
M & L for TMT bars 10 mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
500
-
-
M & L for TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
100
-
-
M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directetd.
285
-
-
Material & Labour for cleaning of Septic Tanks, soakage wells and manholes of any size and capacity by removing the sewage water and sludge and other materials by using Vehicle Mounted automatic sewage suction machine and disposal to out side MD land and cleaning the complete area including making good any damages complete all as directed.
350
-
-
Cleaning of Manholes of any size , type and capacities by using a pressure pump used for sewage cleaning and removing out all waste solid material/ sludge to a borrow pit with in 50 m of the location of manholes and spreading bleaching powder on top and surrounding area of borrow pit and covering with fresh mud and finaly spreading unslaked lime , around the manhole and over the borrow pit complete all as directed.
100
-
-
M&L for keeping sewage lines fully functional by providing services of cleaning of blockages of sewage lines of any dia and depth, manholes of any size and depth, working in foul conditions, cleaning of manholes and sewage lines by mechanical means, flushing with water in sewage lines between successive manholes and keeping the system functional including water closets, floor traps, Nahani traps, gully traps etc, upto final drop/outlet into septic tanks, in the area Under AGE B/R II by providing adequate manpower for attending complaints of sewage cleaning as instructed by concerned JE with complaint slip and report back to the same JE after resolution of complaints including maintaining of the record of complaint slips after getting signature of users, complete all as specified and as directed by Engineer-In-Charge.
8
-
-
M&L for keeping sewage lines fully functional by providing services of cleaning of blockages of sewage lines of any dia and depth, manholes of any size and depth, working in foul conditions, cleaning of manholes and sewage lines by mechanical means, flushing with water in sewage lines between successive manholes and keeping the system functional including water closets, floor traps, Nahani traps, gully traps etc, upto final drop/outlet into septic tanks, in the area Under AGE B/R II by providing adequate manpower for attending complaints of sewage cleaning as instructed by concerned JE with complaint slip and report back to the same JE after resolution of complaints including maintaining of the record of complaint slips after getting signature of users, complete all as specified and as directed by Engineer-In-Charge.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements