Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date22 May 2024
Closing Date19 Jun 2024
Tender Amount₹ 47,40,000
Costs
EMD
₹ 94,800Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Provision Of Gazebo With Hardstanding And Associated Facilities Inside Nausena Baugh,provision Of 03 Nos Split Acs For Technical Rooms At Building No 08a Of Tpw, Provision Of Split Ac For The Server Room Of 4 Meaf In T- 44 (old Smpss) Build
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_655460_1Bid Award Id
ViewTender No
C/8348/24-25/E8 / Token 34 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Removing excavated materials exc 1.5 Km but n. exc 5 Km and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
41.68
-
-
M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in foundation, plinth beams, bases of columns and mass concrete complete all as specified and directed by Engineer-in-Charge.
10
-
-
M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified and directed by Engineer-in-Charge.
4.3
-
-
M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc.complete all as specified and directed by Engineer-in-Charge.
7
-
-
M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves. complete all as specified and directed by Engineer-in-Charge.
11.25
-
-
Use and waste of form work to formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engineer-in-Charge..
100
-
-
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves ,plinth beam including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engineer-in-Charge.
65
-
-
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200 mm thick ( horozontal or slopping) for rough finished surface flat or curved of concrete complete all as specified and directed by Engineer-in-Charge.
85
-
-
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions flat or curved of concrete complete all as specified and directed by Engineer-in-Charge.
72
-
-
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed by Engineer-in- charge
20
-
-
S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
2600
-
-
S & F high strength corrosion resistant TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.
900
-
-
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
29
-
-
M&L Brick work with fly ash bricks, bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
15
-
-
M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
100
-
-
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.
90
-
-
M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed
75
-
-
M & L for 10 mm thick, screed bed as in roof in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
75
-
-
Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
15
-
-
M&L for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:-
(a) Preparing and cleaning of fully dry surfaces as per IS3067-1966
(b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface.
(c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application.
The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane.
75
-
-
Excavating in post holes (or similar holes) each n exc 0.50 cu. M, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard or dense soil complete all as specified and directed
74
-
-
M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
12.86
-
-
M & L for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing (fencing post) including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.
750
-
-
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.
261
-
-
Supply of Chain link MS galvanisd fencing, made of 5.5 mm dia wire and including PVC coating of 1.3mm thickness mesh size 50mm x 50mm complete all as specified and as directed.
1000
-
-
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and as directed..
400
-
-
M & L for mild steel round bar 10mm dia and over cut into length, bend to shape required including cranking bending spirally for hoping as in tie bar for fixing chain link fencing complete all as specified and directed.
350
-
-
M& L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long diameter of neck 16 to 20 mm complete all as specified and as directed.
50
-
-
M & L for Plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
1.75
-
-
S & F MS steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as speicfied and directed.
1800
-
-
M&L for rolled mild steel work conforming to Fe 410 -W (Gde E- 250) quality A as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
1000
-
-
S & F rolled mild plates (plain or chequered) channels, square cut or notched, forming holes with riveted, bolted or welded attachment conforming to Fe 410W Gr E-250, quality-A complete all as specified and directed.
200
-
-
S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with diameter of shank 16 to 20 mm, but length of bolt exc 15cm but n.exc 22.5cm long all as specified and as directed.
100
-
-
S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed.
740
-
-
Supply and fixing pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etc fixed with self tapping screws complete all as specified and directed.
40
-
-
M & L for 100 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in hard standing etc, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
470
-
-
M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed.
12.5
-
-
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
250
-
-
S & F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-450 Gde-E-250 Quality -A complete all as specified and directed.
250
-
-
Supply, fabricating and fixing Aluminium Door, Single Shutter Type, fabricated with anodised aluminium extrusions consisting of frame and shutter as per specifications given below with aluminium beading and rubber gasket of suitable size including fixing of 02 Nos aluminium Handle of size 230mm, 01 No. Hydraulic floor spring, 2 Nos aluminium tower bolt of size 200mm and one brass lock, 5 Leavers with two keys fixed with rawl plug complete including necessary joining cleats, glazing clips, rubber packaging, snap beading and other builders hardware as required all as specified and directed. [a] Top and side members of frame shall be of size 63.50 x 38.10 x 2.00 mm [b] Vertical style of door shutter for both sides shall be of size 85 x 44.45 x 2.00 mm [c] Top and bottom rail of door shutter shall be of size 95.25 x 44.45 x 2.00 mm [d] Middle rail of door shutter shall be of size 100.00 x 44.45 x 2.00 mm [e] Top half of the door above middle rail of the shutter to be provided with 5mm thick Tinted Glass.
[f] Bottom half of the door below middle rail of the shutter to be provided with 12mm thick Prelaminated Particle Board, Medium Density, Interior Grade, Both Sides Decorative Lamination.
2.31
-
-
M & L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
350
-
-
M & L for reinforced cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.
5
-
-
M & L for aluminium dividing strips, 1.5mm thick and inserted in position to conform to design and width of the strip 38mm complete all as specified.
80
-
-
M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.
40
-
-
Supply, laying, connection and testing in repair, 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
7.5
-
-
Supply, laying, connection and testing in repair, 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
7.5
-
-
Supply, laying, connection and testing in repair, 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
12
-
-
Supply and fixing vitreous china (White) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (White) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. Make: Hindware Cat No. 20044 or equivelant of make as per list of manufacturer
1
-
-
S & F 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. Make: Prayag Cat No.503 or equivelant of make as per list of manufacturer
1
-
-
S & F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. Make: Prayag Cat No. 324-HK or equivelant of make as per list of manufacturer
7
-
-
S&F PVC waste pipe of bore 32 mm and 900mm long to WHB all as specified complete all as specified and directed. Make: Prayag Cat No.3271 or equivelant of make as per List of manufacturer's
1
-
-
S & F 5 mm thick beveled edge looking Mirror of size 600 x 450 mm of selected quality with 6 mm thick plywood backing and fixing in to wall with pretruded stainless steel Metal Studs complete all as directed and as required at site
2
-
-
S & F 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) with all accessories complete all as specified and directed.
1
-
-
S & F in repairs, 15mm bore, bib taps, fancy type, with wall flange cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
1
-
-
S & F 15 mm bore, stop valve, cast copper alloy, chromium plated, fancy type with long shank and cup(conceled type) crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
3
-
-
S & F 5 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
3
-
-
S & F Vitreous China urinal, half stall type, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed.
2
-
-
S & F in repair Wash Hand Basin, Vitreous China (flat back or angle back type)/oval shape any size, including cutting for and pinning in ends of brackets or erecting stand of size 550 X 400 complete all as per manufacturer's instructions and as required at site. Make: Hindware Cat No 10100 or equivelant of make as per list of manufacturer
1
-
-
S & F in repair 15 mm bore, pillar taps, brass chromium plated, Single Lever screwed for iron pipe complete all as specified and directed.
1
-
-
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
6
-
-
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
6
-
-
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors complete all as specified and directed.
4
-
-
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors complete all as specified and directed.
4
-
-
M & L for PVC (SWR) plain Floor/ Nahani trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed. .
4
-
-
S & F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. .
2
-
-
S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. .
2
-
-
S & F 75 mm bore PVC (SWR) branch piece, single (single y) equal or unequal complete all as specified and directed.
2
-
-
S & F 110mm bore PVC (SWR) branch piece, single(single y) equal or unequal with access door complete all as specified and directed.
2
-
-
S & F 75m m bore PVC (SWR) branch piece, single(single y) equal or unequal with access door complete all as specified and directed.
2
-
-
S & F 75mm bore PVC (SWR) junction single T Equal / unequal complete all as specified and directed.
2
-
-
S & F 110mm bore PVC (SWR) junction single T Equal / unequal complete all as specified and directed.
2
-
-
M/L for pre construction anti termite treatment Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
35
-
-
M/L for pre construction anti termite treatment of soil Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
75
-
-
M&L for Non-skid coloured ceramic joint free tiles with tile spacer of minimum thickess 3mm & in light shade 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floors set and jointed in neat with epoxy grout and masking tape shall be put before putting the epoxy grout , grout shall be througly cleaned immediatlely and pointed in white or coloured to match the shade of the tile including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
75
-
-
M&L for Glazed ceramic tiles in vertical surface 450 x 350/450 x300 ,7 to 8 mm thick with tile spacer of minimum thickess 3mm ,jointed in neat with epoxy grout and masking tape shall be put before putting the epoxy grout , grout shall be througly cleaned immediatlely and pointed in white or coloured to match the shade of the tile complete all as specified and as directed. Note : Rate includes for cutting for offsets etc) complete all as specified and as directed including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
77
-
-
Supply, hoisted and fixing in position 2000 Ltrs capacity rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings including 25 mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minium weight 15 mm - 210 gms) complete all as specified & directed.
1
-
-
S&L 200 mm inner diameter with tolerance of +/- 2 mm double wall corrugated HDPE pipes in any length including necessary collars , fittings , fixtures , etc. laid in terenches complete all as specified and as directed.
35
-
-
M&L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate mixed with WPC laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed.
75
-
-
M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS
75
-
-
M&L for preparation of new platered surface of wall and applying two coats of weather proof exterior acrylic emulsion paint having dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS
80
-
-
S&F Factory made UPVC white colour fixed window / ventilator (half fixed half louvered) of area not exceeding 1.0 Sq.m, made of extruded profiles with wall thickness of 2.3mm ± 0.2mm, Window profile with hollow section with multi chamber, frame [60mm X 58mm], T profile (One vertical length in between two shutters) [60mmx 74mm], Glazing bead [35mm X 20mm] will be mitred cut and fusion welded at all corners, including drilling of holes per fixing hardware and drainage of water of etc., making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel frame [28mmx 21.5mm], T profile [27mm x 17mm] to be inserted in required profile, frame will be fixed to wall with 8mm X 100mm long fasteners including stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapless complete all as spefied and as directed. .
0.85
-
-
S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frames/ Chowkhats of size 65 mm x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as spefied and as directed.
9.6
-
-
S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as spefied and as directed.
4.41
-
-
M&L Granite Stone kerb of roughly squared stones of size 20cm x 30cm, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush complete all as spefied and as directed. .
200.2
-
-
M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
3.5
-
-
S & F 50 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.
2
-
-
S & F 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed.
2
-
-
S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 50 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed
1
-
-
M & L for conceled Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch.
(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)
80
-
-
All as per item No. 92 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto
18
-
-
All as per item No. 92 above but for One 3/5 pin socket outlet 6 amps point on same board complete ditto
3
-
-
All as per item No. 92 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FRLSH (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLSH (ISI marked) as earth lead complete ditto
14
-
-
S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.
101
-
-
S & F Modular socket outlet 6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.
21
-
-
S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.
14
-
-
S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.
14
-
-
S & F steped type modular fan regulator ,100/120 W 2 module complete all as specified and as directed.
20
-
-
S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.
80
-
-
Supply and fixing of LED Surface mounting general purpose LED Battens in extruded aluminium housing tube light fitting 1x 20Watt with LED Lamp , driver including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified.
Make : Model No LUMILINEPLUSNEOBS20WLED830SPCSSIND of Havells or equivalent model of make list as given in PS as approved by GE
38
-
-
Supply and fixing of LED Surface mounting general purpose LED Battens in extruded aluminium housing tube light fitting 1x 10Watt with LED Lamp , driver including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified.
Make : Model No LUMILINEPLUSBS10WLED830SPCSSIND of Havells or equivalent model of make list as given in PS as approved by GE.
2
-
-
Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in triple optics complete with IP 66 protection with and including 1.5 sqmm weather proof 3 core FRLH grade copper conductor and 32 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer and including taking up old light fitting complete all as specified and as directedcomplete all as specified and directed
Make:- Havells Cat No ENDURASUNDOWNSL35WLED765PASYBOPC or its equivalent make of Philips / CG
8
-
-
Supply, fix, installation and commissioning BLDC ceiling fan of less noise, silent operation, light colour, conforming to IS-374-2019, 1200 mm sweep, 230 Volts, BEE 5 Star rating including all accessories such as down rod etc and connecting up with 1.5 Sqmm, PVC insulated, multistranded copper conductor cables from ceiling rose to fan complete all as specified and directed. (Note: Ceiling fan should have minimum 3 years manufacturer's warranty)
Make : USHA/Havell's/Bajaj/CG
20
-
-
S & F LED outdoor Flood light fittings, Min IP 66 rated, High pressure aluminium die cast housing and toughened glass cover, 50 Watt, Lumen ≥ 10000, Luminous afficacy ≥ 110 Lum/Watt, CCT:WW/NW/CW, CRI 70 Ra, 4KV surge Protection with external SPD of 10 KV, with open and short circuit protections with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed. (Make: Havells Cat No. ETALEGANZAFLS50WLED757P60DTOTG or equivelant of make as per list of manufacturer)
10
-
-
S & F Distribution Board, TPN 4 Way, 415V, Double door with IP 43 protection, IK 09 complete all as specified and as directed. (Make: Havell's cat part No. DHDNTHCDRW04 or equivalent make as per List of Manufacturer's mentioned in PS)
2
-
-
S & F Distribution Board, SPN 12 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed. (Make: Havell's cat part No. DHDPSHODRW12 or equivalent make as per List of Manufacturer's mentioned in PS)
3
-
-
S & F Distribution Board, SPN 8 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed. (Make: Havell's cat part No. DHDPSHODRW08 or equivalent make as per List of Manufacturer's mentioned in PS)
1
-
-
Supply, fixing, commissioning and testing MCB SPN 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed (Make: Havell's cat part No. DHMGCSNF006-032 or equivalent make as per List of Manufacturer's mentioned in PS)
4
-
-
Supply, fixing, commissioning and testing in repairs MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve, complete all as specified and as directed (Make: Havell's cat part No. DHMGCSPF006-032 or equivalent make as per List of Manufacturer's mentioned in PS)
61
-
-
M & L for Sub main wiring with 2 runs of Single core 2.5 sqmm [ for Phase & Neutral ] PVC insulated, unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (Medium grade) with all conduit accesories and fittings along with 1 run of single core 2.5 sqmm PVC insulated, unseathed ,multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i) Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
130
-
-
M & L for Sub main wiring with 2 runs of Single core 4 sqmm [ for Phase & Neutral ] PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 4 sqmm PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i)Two runs of 4 sqmm and one runs of 4 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
70
-
-
M & L for Sub main wiring with 2 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 6 sqmm PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i)Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
65
-
-
M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by the Engineer-in-Charge.
4
-
-
S & F Exhaust fan, 300 mm sweep, heavy duty, metal body 1400 RPM, AC, single phase, complete with all accessories and louver and electric connection including making necessary holes in walls complete all as specified and directed Make : Havells, Model : Ventil Air DS or equivelant of make r equivalent make as per List of Manufacturer's mentioned in PS
14
-
-
S & F energy efficent, low noice, wall mounted fan 400 mm sweep,1350 rpm, AC, single phase 240 Volts, 50 Hz, Aerodynamically designed blades, Double ball bearings, Sturdy close-mesh guards ,copper wound complete with all accessories and electric connection complete all as specified and directed Make : Havells, Model : FHWSWSTIVR16 or equivalent model of Bajaj/Usha/ Khaitan/Orient as approved)
6
-
-
S & F MCCB 415 Volt, 16 KA, 4 Pole, 63 Amps Capacity complete all as specified and as directed. (Make: Havells Cat Part No. IHLGNF0063 or equivelant of make as per List of Manufacturer's)
2
-
-
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core, laid in tranches complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)
80
-
-
Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
6
-
-
M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed.
(Note: Thickness after punning down shall be measured for payment)
5
-
-
Supply and laying well burnt bricks, fly ash bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.
0.3
-
-
Supply, installation and testing inverter split AC units indoor/outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 star rating,copper condenser,copper cooling coil and EER 3.2 of capacity 1.5 TR including 2.5 sqmm 4 core flex copper cable connection from indoor to outdoor unit as per site requirement including making holes of required dia on walls and necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable, angle iron bracket will be neasured and paid separately under respective item MAKE:- Daikin Model No. FTKM50UV16U/V / Hitachi Model No. RSRG518FFEO KIYORA5200 / O- General Model No. ASGG18CETAB”
4
-
-
S & F voltage stabilizer of capacity 4 KVA, single phase, input working voltage 170-270 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed. Make: V-Gaurd model no VG-400 or equivalent model of make mentioned in PS
4
-
-
Supply and fixing copper pipe line heavy duty 1/4" dia with insulation,flair nuts as sunction/ discharge pipe of split AC complete all as specified and directed.
6
-
-
Supply and fixing copper pipe line heavy duty 5/8" dia with insulation, flair nuts as sunction/ discharge pipe of split AC complete all as specified and directed.
6
-
-
S & F Rigid non-metalic PVC conduit (20mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed.
20
-
-
All as per item No. 92 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4.00 sqmm multistranded FRLSH (ISI marked) and 4.00 sqmm PVC insulated unsheathed solid copper conductor cable FRLSH (ISI marked) as earth lead complete ditto
3
-
-
Supply, installation and testing inverter split AC units indoor/outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 star rating,copper condenser,copper cooling coil and EER 3.2 of capacity 2.0 TR including 2.5 sqmm 4 core flex copper cable connection from indoor to outdoor unit as per site requirement including making holes of required dia on walls and necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable, angle iron bracket will be neasured and paid separately under respective item Make: Bluestar,Carrier,Voltas,LG, Daikin ,Hitachi ,O-General
1
-
-
S & F voltage stabilizer of capacity 5 KVA, single phase, input working voltage 170-270 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed. Make: V-Gaurd model no VG-500 or equivalent model of make mentioned in PS
1
-
-
S&F Socket Residual Current Device (SRCD) With Steel Enclosure two pin and earth plug including 20 Amps MCB SP complete all as specified and as directed (Make : Havells Cat Part No. DHDDCDP025202003 or equivelant model of make mention in PS)
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements