Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Oct 2024
Closing Date20 Nov 2024
Tender Amount₹ 40,00,000
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671094_2Bid Award Id
ViewTender No
8118 / E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M & L for washing, rubbing down and stopping of distempered and painted surfaces of Walls including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One coat of Acrylic Washable Distemper on Wall surfaces complete all as specified and as directed.
7800
-
-
M & L for washing, rubbing down and stopping of distempered and painted surfaces of Ceilings including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One coat of Acrylic Washable Distemper on Ceiling surfaces complete all as specified and as directed.
800
-
-
M & L for complete removal of existing treatment on Wall surfaces using Vacuum based Hand held Sander Machine including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying Two Coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer complete all as specified and as directed.
300
-
-
M & L for complete removal of existing treatment on Ceiling Surfaces using Vacuum based Hand held Sander Machine including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying Two Coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer complete all as specified and as directed.
100
-
-
M & L for washing, rubbing down and stopping of painted surfaces including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One Coat of Cement based Paint on Walls complete all as specified and as directed.
8000
-
-
M & L for washing, rubbing down and stopping of painted surfaces including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One Coat of Weather Proof Exterior Emulsion Paint [100% Acrylic] on Walls complete all as specified and as directed.
6800
-
-
M & L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
350
-
-
M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
580
-
-
M & L for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats of steel surfaces over 10cm width or girth and applying Two Coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed.
80
-
-
M & L for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats of steel surfaces not exceeding 10cm width or girth and applying Two Coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed.
8
-
-
Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.
9.5
-
-
M & L for brick work with Fly Ash Blocks, Modular Size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.
7.5
-
-
M & L for brick work in half brick thick walls using Fly Ash Blocks, Modular Size straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 6mm dia bars at every fourth course of brick work complete all as specified and as directed.
30
-
-
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.
460
-
-
M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
230
-
-
M & L for rendering on fair faces of brick / concrete surfaces, 10 mm thick in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
240
-
-
M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of Ceiling Surfaces finished even and smooth without using extra cement complete all as specified and as directed.
50
-
-
M & L for rendering on fair faces of brick / concrete surfaces, 10 mm thick in Cement Mortar 1:3, surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
5
-
-
M & L for preparing newly plastered Wall Surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer on walls complete all as specified and as directed.
95
-
-
M & L for preparing newly plastered Ceiling Surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer on walls complete all as specified and as directed.
5
-
-
M & L for preparation of newly plastered Wall Surfaces and applying Two Coats of Cement Based Paint over One Coat of Alkali Resistant Primer complete all as specified and as directed.
240
-
-
M & L for preparing newly plastered wall surfaces and applying Three Coats of White Washing complete all as specified and as directed.
20
-
-
M & L for preparing newly plastered Ceiling Surfaces and applying Three Coats of White Washing complete all as specified and as directed.
25
-
-
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. up to a depth of 30 to 50mm thick and trimming, cleaning the surfaces of any thickness exposed existing steel surafces free from dust, loose material, surface contamination, rust, scale, mortar, concrete, other loose and deleterious materials, materials which reduce bond or prevent suction or wetting by repair materials, delaminating, weak, damaged and deteriorated concrete by blast cleaning or other means of mechanical abrasion or suitable means and Applying a Coat of Zinc Rich Epoxy Primer to all exposed Steel Surfaces as Antirust Agent to form 40 Microns of Dry Film Thicknes and thereafter applying a Coat of Bonding Agent such as Brush Bond or Nito Bond AR of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent product of M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited as per Manufacturer's Instructions including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed.
5
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
20
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
40
-
-
M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 300 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.
60
-
-
Demolition of Stone Slab laid, bedded and pointed in Cement Mortar of thickness not exceeding 25 mm and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed.
13
-
-
M & L for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Steps, Jambs, Pillars, Window Cills, Cooking Platform etc. and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Jambs, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of Landings, Treads, Window Cills, Cooking Platform etc. shall be Bullnosed / Half Rounded. The edges of the Treads and Landings shall also be provided with three Nos of Grooves.
6
-
-
M & L for Marble Stone Slabs of 18 to 20 mm thick of Colour Makarana White / Makarana Doogri Adanga / Black Zebra Bhainsalana as in Floors, Treads of Steps, Window Cills, Cooking Platform etc. with machine cut edges, Marble stone slabs shall be of design / pattern as directed, including diagonals, inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with White Cement [slurry] and jointed and pointed with white cement slurry mixed with a admixture of pigment to match shade of Marble Slabs, rubbing and grinding with mechanical equipment fitted with suitable grit size carborundum stones and polishing with Oxalic Acid to smooth, bright mirror finish including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed.
6
-
-
S & F in repairs Top Covers suitable for HDPE Water Tanks of Capacity 500 Litres to 1000 Litres, secured to tank with hook bolt screw male and female for proper closing and opening complete all as specified and as directed.
10
-
-
M & L for Removal of Plants including Roots not exceeding 15 cm girth over Roof Slab or Junctions of Walls and Soil Pipes / Vertical Stacks etc. over Buildings / Structures including clearing the surrounding surface and making good in Cement Mortar 1:3 to match with the existing complete all as specified and as directed.
40
-
-
S & F in repairs Decorative type Stainless Steel Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre and Decorative type Stainless Steel Globe type Brackets of size suitable to 25mm dia curtain rod complete all as specified and as directed.
60
-
-
S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick Commercial Plywood or PVC Sheet and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed.
10
-
-
S & F in repairs Bib Tap, Standard of PTMT, 15mm Dia [Minimum Weight - 90 Grams] any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.
30
-
-
S & F in repairs Stop Valve of PTMT, 15mm Dia [Minimum Weight - 90 Grams] any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.
10
-
-
S & F in repairs Pillar Taps of PTMT, 15mm Dia [Minimum Weight - 110 Grams] any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.
5
-
-
S & F in repairs Health Faucet, Chromium Plated ABS Body with 1.00m Long Flexible Tube, Wall Hook, Non Return Valve complete as per Jaquar Catalogue No. ALD-579 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified and as directed.
5
-
-
S & F in repairs Health Faucet, Chromium Plated ABS Body with 1.20m Long Flexible Tube, Wall Hook, complete as per Jaquar Catalogue No. ALD-573 or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified.
5
-
-
S & F in repairs, Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.
20
-
-
S & F in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, Low Level Flushing Ccistern, White, with Inlet Ball Valve, Float, Handle, Flush Pipe of Polyethylene of Low or High Density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm Long with PTMT Check Nut and Union etc. including Brackets and Connections to Pipe and Flush Pipe complete all as specified and as directed.
10
-
-
S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified.
5
-
-
S & F 4mm thick Sheet Glass, Ordinary Quality and glazing with Oil Putty or with Wooden Beads in Squares not exceeding 0.5 Sq.m in each pane including Hacking out Old Broken Glass [any Thickness, Size, Quality or Description] from Wooden / Steel / Aluminium Frames Glazed with Putty or fixed with Beads complete all as specified and as directed.
5
-
-
S & F 4mm thick Figured Glass, Pin Head Type Glass, Ordinary Quality and glazing with Oil Putty or with Wooden Beads in Squares exceeding 0.5 Sq.m in each pane including Hacking out Old Broken Glass [any Thickness, Size, Quality or Description] from Wooden / Steel / Aluminium Frames Glazed with Putty or fixed with Beads complete all as specified and as directed.
2
-
-
S & F Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples with existing or new wooden beading including necessary painting to beading to match with existing surfaces complete all as specified and as directed.
30
-
-
S & F in repairs Ball Valves, 25 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe [Minimum Weight 25mm - 455 Grams] etc complete all as specified and as directed.
5
-
-
S & F in repairs Ball Valves, 32 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe [Minimum Weight 32mm - 455 Grams] etc complete all as specified and as directed.
5
-
-
S & F in repairs Stainless Steel Kitchen Plate Rack of size 24"x30"x10", made of 0.85mm thick Stainless Steel Sheet complete all as directed. [Make: Model No. P-330 of Prayag or its equivalent in Polytuf / Nirali / Jayna / Neelkant]
4
-
-
S & F in repairs Anglo Indian type vitreous China wash down Water Closet [Semi Pedestal Pattern], White including Plastic Water Closet Seat back closed pattern with Flat Bottom and Cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.
2
-
-
S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including Plastic Water Closet Seat, Back, Closed Pattern, White with Flat Bottom and Cover and Mild Steel Chromium Plated or Aluminium Hinging Device and "P" or "S" Trap and including 10 Litres capacity, PVC Valve less, Syphonic action type, Low Level Flushing Ccistern, White, with Inlet Ball Valve, Float, Handle, Flush Pipe of Polyethylene of Low or High Density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm Long with PTMT Check Nut and Union etc. including Brackets and Connections to Pipe and Flush Pipe mplete all as specified and as directed.
2
-
-
S & F in repairs Vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm, White with integral foot rests and 'P' or 'S' trap including provision of lime concrete bedding complete all as specified and as directed.
2
-
-
S & F in repairs Plastic Water Closet Seat, Back, Closed Pattern, White with Flat Bottom and Cover and Mild Steel Chromium Plated or Aluminium Hinging Device complete all as specified and as directed.
10
-
-
S & F in repairs PVC Nahani Trap 100mm dia with Grating including jointing to waste pipe fixed in Cement Concrete, Type B1, 1:2:4 complete all as specified and as directed.
10
-
-
S & F in repairs 32mm dia PVC Flexible Waste Pipe, 900 mm long fixed to Wash Hand Basin or Sink in repairs complete all as specified and directed.
15
-
-
S & F in repairs PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc complete all as specified and as directed.
10
-
-
S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipes complete all as specified and as directed.
65
-
-
S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipes complete all as specified and as directed.
40
-
-
S & F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
30
-
-
S & F in repairs 160mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipes complete all as specified and as directed.
40
-
-
S & F 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
13
-
-
S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.
11
-
-
S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal without access door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal without access door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 75 mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.
5
-
-
S & F 110 mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.
5
-
-
M & L for rubbing and grinding with mechanical equipment fitted with suitable grit size carborundum stones, removing black spots and other faded surfaces, grouting hungry spots with grey cement mixed with a admixture of pigment to match shade of existing surface where required, rubbing and polishing to smooth mirror finish and finally polishing with Oxalic Acid to smooth, bright mirror finish to existing Granite Stone / Marble Stone / Kota Stone / Terrazzo Flooring / Dado / Skirting complete all as specified and as directed.
10
-
-
Resecuring or easing & adjusting without taking down shutter of size exceeding 1 Sq.m but not exceeding 2 Sq.m each including renewal of unserviceable screws, etc. as required complete all as specified and as directed.
10
-
-
Resecuring or easing & adjusting without taking down shutter of size not exceeding 1 Sq.m each including renewal of unserviceable screws, etc. as required complete all as specified and as directed.
10
-
-
Taking down Rolling Shutter of any size and description of size not exceeding 10 Sq.m Push Pull or Manual type and Re-Fixing to in Original Position after carrying out Repairs and servicing of Rolling Shutters for smooth and trouble free operation, Straightening Sliding Rails and removing of worn out components such as Hood Cover, Laths, Ball Bearings, Sliding Rails, Helical Wire Springs, Lock Plates, Brackets, Plates, Shaft Rod etc. including greasing including preparation of surfaces and applying Two coats of Epoxy Anti-Corrosive Paint over one coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed. Note: Spares required if any shall be measured and paid separately as supply only.
6
-
-
All as per Serial Item No. 76 above but Gear Operated Rolling Shutter with Bevel Gear Box and Cranked Handle of size exceeding 10 Sq.m but not exceeding 20 Sq.m complete all as specified and directed.
6
-
-
Supply only Interlocking Lath [75mm Width] Section made of 1.25 mm thick CRCA Sheet, in single piece to match with existing and fitted with automatic lock section fitted with malleable mild steel clips on either side and duly shop coated of primer complete all as specified and as directed.
10
-
-
Supply only 150mm Dia Helical Wire Spring made of 6.4mm dia of High Tensile Steel Wire conforming to IS – 4454 having 60 to 80 Helical for smooth working complete all as specified and as directed.
1
-
-
Supply only Rolling Shutter Shaft made of MS ERW Pipe, 50 mm bore, Medium Grade, conforming to IS – 1239 complete all as specified and as directed.
2
-
-
Demolition of Unreinforced Cement Concrete including tiles of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.
3
-
-
M & L for PCC 1:4:8, Type D2, using 40mm graded stone aggregate as in Mass concrete for sunken floor complete all as specified and as directed.
1.5
-
-
M & L for 40 mm thick, PCC 1:2:4, Type B0, using 20mm graded aggregate as in Sub base complete all as specified and as directed.
20
-
-
M & L for rendering 15mm thick in cement mortar 1:3 on Floor / Wall Surfaces finished even and smooth without using extra cement including mixing Liquid Water Proofing Compound Conplast @ 200 ml per Bag of Cement for levelling the surface smooth to receive the Water Proofing Membrane and applying Three Coats of Brushbond RFX acrylic based cementitious material as per Manufacturers instructions, thereafter applying Primer @ 0.5 KG / Sq.m over the prepared surface and applying Hot Blown Cutback Bitumen @ 0.70 KG / Sq.m and laying Polythene Film 150 Micron thick with Cutback Bitumen Adhesive with minimum 150mm overlap on all sides complete all as specified and as directed.
Make of Chemicals: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited.
20
-
-
M & L for Loose Filling with broken stone or boulders of gauge 40 to 80mm in soakage pits etc. including removing un serviceable brick bats etc. complete all as specified and directed.
1
-
-
S & F 20mm outer dia of pipe, 3–layer PP–R [Polypropylene Random Copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing including taking down or up steel tubing and connections of any description complete all as specified and as directed.
20
-
-
S & F 25mm outer dia of pipe, 3–layer PP–R [Polypropylene Random Copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete to walls, ceilings or in floors etc. including testing including taking down or up steel tubing and connections of any description complete all as specified and as directed.
20
-
-
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed.
10
-
-
Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed.
10
-
-
S & F Second Class Hard Wood, Plain, Solid, Straight Chowkats and Frames, Wrought, Framed, Rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints complete all as specified and directed.
0.5
-
-
S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed.
8
-
-
S & F Factory made, 35mm thick, Second Class Hard Wood, Plain framed, Panelled Shutter [Two Panel] with Lock Rail and Panel of 9 mm BWP Commercial Ply or 12 mm Veneered Particle Board with Commercial Veneering on both faces, the size of Rail and Stile as per IS – 1003 [Part – I], Kiln Seasoned and Chemically Pressure treated and fitted to Chowkats complete all as specified and as directed.
15
-
-
M & L for providing Cement Concrete, Type C1, 1:3:6 using 20mm Graded Aggregate as in Lintels up to 1.5m Clear Span, Cills, Steps, Seismic and other Similar Bands, Plinth Courses, Copings, Bed Plates etc. complete including necessary formwork complete all as specified and as directed.
0.5
-
-
S & F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed.
30
-
-
S & F Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed.
30
-
-
S & F Aluminium anodised Handle, Cast Type, of size 150 mm complete all as specified and as directed.
50
-
-
S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 200 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
20
-
-
M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
41
-
-
S & F Mild Steel work confirming to Fe - 290, Grade E-165, as in framed work portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed.
250
-
-
M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
115
-
-
S & F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per Specification & Drawing shown on Serial Page No. 160 of MES Schedule Part - II complete all as specified and as directed.
20
-
-
S & F Factory made Solid Panel PVC Door Shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing shown on Serial Page No. 157 of MES Schedule Part - II complete all as specified and as directed.
10
-
-
M & L for Powder Coated Aluminium Sections [Minimum 50 Micron thick] of approved colour as in Door, Window, Ventilator Frames, Partitions with one or more rebates and Door, Window, Ventilator Shutters, Sliding or Openable Type, with or without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No], Stainless Steel Friction Hinges [1 No] per Window Shutter and 150mm Dia Handles on both sides, Tower bolts, 200 mm Long [2 Nos], Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc. per Door Shutter complete all as specified and as directed. Note: [a] The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I.
[b] Supply only panel inserts of Glass / Particleboard / Gauze / Grills will be measured and paid separately.
[c] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Butt hinges, Tower Bolts, Stainless Steel Friction Hinges and fixing only of panel inserts of Glass / Particleboard / Gauze / Grills etc.
90
-
-
Supply only 5mm thick sheet glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
10
-
-
Supply only 4mm thick Figured Glass, Pin Head Type Glass, Ordinary Quality in Squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
2
-
-
Supply only Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm complete all as specified and as directed.
10
-
-
S & F Mild Steel Door Spring 300 mm, Ordinary Rat Rail Rod Pattern springs including roller and roller plate complete all as specified and as directed.
5
-
-
M & L for Second Class Hard Wood Plain Fillets, Square, Rectangular or Triangular in section, Cross Sectional area exceeding 13 Sq.cm but not exceeding 25 Sq.cm, wrought, secured with nails or brads to timber frame all as specified.
50
-
-
S & F in repairs 18mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade fixed with screws to wooden frames, partitions, shelves, cupboards, door panels complete all as specified and as directed.
20
-
-
S & F Magnetic Catches with Striking Plate, First quality suitable for Cupboard shutters complete all as specified and as directed.
6
-
-
S & F 40mm dia stainless steel fancy type bright finished Cupboard Knobs fixed with nut, screw and washer complete all as specified and as directed.
12
-
-
S & F Hasp and Staple, safety type of aluminium anodised including bolt to hinge plate, fixed with screws of 100mm size complete all as specified and as directed.
10
-
-
S & F Continuous [Piano] Hinges, Mild Steel, Bright finish or Electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and as directed.
14
-
-
S & F in repairs Door Closer Hydraulically Regulated, Designation No. 3 universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium body complete all as specified and as directed.
4
-
-
Supply only Integral Water Proofing Compound [ISI marked] of approved make complete all as specified and as directed.
2
-
-
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Plastering, preparing surfaces and welding steel wire Fabric / Mesh of size 75X25mm of weight not less then 3.0KG per Sq.m to existing reinforcement, and Rendering, in Cement Mortar 1:3, of required thickness, including mixing water proofing compound as per manufacturer's instructions and finishing the top surface even and smooth without using extra cement and finishing surface rough conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed.
20
-
-
M & L for preparing newly plastered Wall Surfaces and applying Two Coats of Acrylic Washable Distemper over a Coat of Alkali Resistant Primer complete all as specified and as directed.
140
-
-
M & L for preparing newly plastered Ceiling Surfaces and applying Two Coats of Acrylic Washable Distemper over One Coat of Alkali Resistant Primer complete all as specified and as directed.
20
-
-
M & L for washing, rubbing down and stopping of distempered and painted surfaces of Walls including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying One coat of washable Plastic Emulsion Paint on Wall surfaces complete all as specified and as directed.
500
-
-
M & L for complete removal of existing treatment on wall surfaces using Vacuum based Hand held Sander Machine including removing Nails etc., filling Holes and Cracks with Plaster of Paris or Cement based Wall Care Putty, rubbing smooth and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed.
800
-
-
M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of Aluminium paint complete all as specified and directed.
265
-
-
M & L for Writing letters or figures [Block, Roman, Italic or Indian] not exceeding 30 cm high including removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers complete all as specified and as directed.
10
-
-
M & L for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats of steel surfaces not exceeding 10cm width or girth and applying Two Coats of Aluminium paint over a Coat of Red Oxide / Zinc Chrome Primer complete all as specified and as directed.
20
-
-
M & L for Cutting / Chipping the spalling concrete of RCC Roof Projections, Edges of Slabs / Fins / Facias / Chajjas etc. of width exceeding 10 cm and not exceeding 20 cm and trimming, cleaning the surfaces of any thickness to receive Plastering, preparing surfaces and Rendering, 15mm thick in Cement Mortar 1:3, of required thickness, including mixing water proofing compound as per manufacturer's instructions and finishing the top surface even and smooth without using extra cement and to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed.
60
-
-
Dismantling Plain or Corrugated Steel Sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
260
-
-
Dismantling of Wrought or Mild Steel Work of any description not otherwise specifically provided for complete all as specified and as directed.
1.5
-
-
S & F for pre-painted Galvalume steel sheets of Trapezoidal profile having pitch 190mm, depth 29mm or Tiled Profile or Sinusoidal Profile and thickness 0.50mm [Galvalume base-PPGL trapezoidal profile sheets], having tensile strength of 550 Mpa, fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size in roof covering complete all as specified and as directed. Note: Overlap shall be provided as specified by the manufacturer.
230
-
-
S & F for pre-painted Galvalume steel Plain Sheets and thickness 0.50mm [Galvalume base-PPGL Sheets], having tensile strength of 550 Mpa, in ridges, hips, valley gutters, drip and straight flashing cut to length & bent to shape, girth sheets fixed with aluminium self tapping screws of size 50/75mm and neoprene and EPDM washers of suitable size in roof covering / cladding / eves trim / rake trim and closure trim / valley rain water gutter / down spouts and top rafters etc. complete all as specified and as directed.
30
-
-
S & F Rolled Mild Steel work conforming to Fe 410-W, Grade-E-250, Quality-A as in Roof Trusses [framed], Trussed, Purlins, Crane Gantries, Rails and fastenings and heavy bracket framing [Beam, Tee, Angle, Channel or Flat Sections] including distance pieces, cleats etc. complete all as specified and as directed.
150
-
-
M & L for disconnecting existing tanks setting aside [or lowering if required] for hoisting if required reconnecting & Refixing in position and Cleaning and removing all scale dirt etc from mouths of circulating pipes of loft tanks in kitchen etc of capacity exceeding 500 Litres and not exceeding 1000 Litres complete all as specified and as directed.
4
-
-
M & L for Cutting Grooves in Brick Wall / Concrete Surfaces, 30 mm wide and 25 mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified and as directed.
33
-
-
M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 10mm graded aggregate as in Sub base for flooring / Levelling Course / Padding over roof slabs & Haunching etc., laid to required slope complete all as specified and as directed.
300
-
-
M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of Oil Based Bituminous Primer conforming to IS – 3384 [Latest] @ 0.3 Litre / Sq.m, laying APP Modified [Polyester Reinforced] Membrane of 3mm thick weighing not less than 3.8 KG / Sq.m confirming to IS – 16532 [2017], by torch application with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces by thermo fusion and finished with a coat of bituminous aluminium paint @ 100 grams per Sq.m on top for water proofing treatment complete including taking down existing Roof Treatment of any description including PCC Padding if any and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
350
-
-
Supply only Integral Liquid Water Proofing Compound [ISI marked] of approved make complete all as specified and as directed.
18
-
-
Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed.
100
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
90
-
-
M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Skirting and Dado etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
10
-
-
M & L for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.
40
-
-
M & L for preparation of newly plastered Wall surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed.
40
-
-
M & L for two coats of synthetic enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces not exceeding 10cm width or girth including preparation of surfaces complete all as specified and as directed.
10
-
-
M & L for Running Welding in repairs including preparation of surfaces to be welded and thickness of metal welded not exceeding 6mm complete all as specified and as directed.
20
-
-
M & L for Running Welding in repairs not exceeding 2.5cm length including preparation of surfaces to be welded and thickness of metal welded exceeding 9mm and not exceeding 20mm complete all as specified and as directed.
20
-
-
S & F in repairs False Ceiling Frame Work using Anodised Aluminium snap grid frame work of 600 X 600 mm panel size for false ceiling with Aluminium "T" section of size 38 X 25 X 1.50 mm thick for Main Runners, 25 X 25 X 1.5 mm thick for Cross Runners and Angle of size 25 X 25 X 1.50 mm thick along the Walls suspended with and including 4 mm dia, Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position including supplying and fixing Decorative Perforated Particle Board of 12 mm thick conforming to IS - 2095 for false ceiling, fixed to ceiling section with 25 mm dry wall screws at 230 mm centres and including applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer complete all as specified.
40
-
-
S & F in repairs False Ceiling Frame Work using Anodised Aluminium snap grid frame work of 600 X 600 mm panel size for false ceiling with Aluminium "T" section of size 38 X 25 X 1.50 mm thick for Main Runners, 25 X 25 X 1.5 mm thick for Cross Runners and Angle of size 25 X 25 X 1.50 mm thick along the Walls suspended with and including 4 mm dia, Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position including supplying and fixing 4mm thick Decorative Non Asbestos Fibre Cement Building Boards [E Board] for false ceiling, fixed to ceiling section with 25 mm dry wall screws at 230 mm centres and including applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer complete all as specified.
45
-
-
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per RM by drilling 12 mm dia holes up to 300 mm deep and 300 mm centre to centre including plugging holes complete all as specified and as directed.
200
-
-
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.
100
-
-
M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.
200
-
-
S & F Durastrip SBS Bituminous Self Adhesive Bitumen Flashing Tape of width 100mm, of thickness 1.6mm, Silver Colour, fixed on Roof Sheeting complete all as specified and as directed.
Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited.
23
-
-
S & F Durastrip SBS Bituminous Self Adhesive Bitumen Flashing Tape of width 150mm, of thickness 1.6mm, Silver Colour, fixed on Roof Sheeting complete all as specified and as directed.
Make: M/s. Fosroc Chemicals India [P] Ltd. / M/s. Sika India Pvt. Ltd. / M/s. Choksey Chemicals Pvt. Ltd. / M/s. STP Ltd. / M/s. Bostik India Pvt. Ltd. / M/s. Thermax Ltd. / M/s. Hindcon Chemical Ltd. / M/s. Asian Paints Limited.
23
-
-
M & L for Uprooting and Removal of Wild Trees / Grass / Bushes etc. from the Manholes / Soil Pipes / Septic Tanks / Soak Wells and their surroundings including its penetrated roots and making good the damaged plaster with Cement Mortar [1:3] and finished the surfaces to match with existing surfaces complete all as specified and as directed.
28
-
-
M & L for Plain / Reinforced cement concrete Type B1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate Cast in Situ in Lintels up to 1.5m Span, Cills, Steps, Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings up to 60 cm in Height, Copings, Kneelers, Apex Stones, Bed Plates including Weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed.
0.5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements