Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date12 Dec 2024
Closing Date2 Jan 2025
Tender Amount₹ 2,30,00,000
Costs
EMD
₹ 3,05,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682336_2Tender No
87159Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SPECIAL REPAIRS AND ADDITIONS ALTERATIONS TO MOHAPATRA MANASI AUDITORIUM AT NSTL VISAKHAPATNAM
SPECIAL REPAIRS AND ADDITIONS ALTERATIONS TO MOHAPATRA MANASI AUDITORIUM AT NSTL VISAKHAPATNAM
SPECIAL REPAIRS AND ADDITIONS ALTERATIONS TO MOHAPATRA MANASI AUDITORIUM AT NSTL VISAKHAPATNAM
BOQ Items
... More
M&L for screed bed or bedding layer of CM 1:6, 15mm thick for laying floor finishes complete all as specified and directed.
600
-
-
... More
M&L for 12mm thick rendering in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
25
-
-
... More
S&F, 8 to 10 mm thick coloured Carpet flooring of polyester Anti Slip for auditorium purpose with suitable adhesive complete all as specified and directed.
600
-
-
... More
M&L for polished granite tiles (of any types) in floors 18 mm thick machine cut laid over and including cement screed base 20mm CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.
65
-
-
... More
M&L for Udaypur green marble slab plain 18 mm thick cut as in flooring and landings of stair case laid over and including cement screed base 20mm CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
5
-
-
... More
M&L for marble slab 18 to 20mm thick machine cut in one piece laid in riser & treads of steps and skirting bedded and including 20mm thick CM 1:4, jointed and pointed with coloured cement including polishing to match the surface including exposed edges of treads shall be moulded complete all as specified and directed.
5
-
-
... More
M&L for non skid ceramic coloured tiles 300 x 300 x 7 mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.
35
-
-
... More
M&L for glazed ceramic tiles coloured size 300 x 450 x 7mm in dados / vertical surfaces, set and jointed neat cement slurry and pointed in white or coloured cement to match and laid over and including 12mm thick rendering in CM 1:3 complete all as specified and directed.
25
-
-
... More
M&L for chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with Dark shade pigment using ordinary cement pigment to match the shade of tiles, including rubbing and cleaning etc. complete, laid over and including 20 mm thick screed bed of cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and directed.
380
-
-
... More
M&L for polishing of existing kota / marble / granite flooring / skirting with machine to obtain glosy finish complete all as specified and directed.
400
-
-
... More
M&L for Silicon based Joint Sealant for Tiles on vertical joints as well Horizontal joints complete all as specified and directed.
5
-
-
... More
Providing & fixing mineral fibre false ceiling tiles at all heights of size 595 x 595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15 x 32 mm of length 3000 mm, cross T of size 15 x 32mm of length 1200 mm and secondary intermediate cross 'T' of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm suspended from ceiling using galvanized mild steel item (galvanised @ 80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, spaced at 1200 mm centre to centre along main ‘T’.
600
-
-
... More
The system should rest on periphery walls / partitions with the help of GI perimeter wall angle of size 24 x 24 x 3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge with 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) including taking down the existing old false ceiling complete all as specified and directed.
-
-
-
... More
Providing & fixing in position wall panelling at all heights with integral densified calcium silicate panels / tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (Part-4), fire performance as per BS:476 (Part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia, 50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm.
800
-
-
... More
Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels / tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete with 15 mm thick fully perforated square / butt edge light weight calcium silicate panels / tiles including taking down the existing old wall panelling complete all as specified and directed.
-
-
-
... More
M&L for post construction antitermite-treatment at points of contact of wood work by chemical emulsion (water based solution) @ 0.5 Ltr/hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same with chlorophyriphos or lindane emulsifiable concentrate conforming to IS 8944 or IS 632 respectively complete all as specified and directed.
110
-
-
... More
M&L for Antitermite treatment of soil under existing floor using emulsion at 1 ltr per hole 300mm centre to centre including drilling and plugging 12mm dia holes with CM 1:2 to match existing floor complete with chlorophyriphos or lindane enulsifiable concentrate conforming to IS-8944 or IS-632 all as specified and directed.
600
-
-
... More
M&L for Antitermite treatment along external wall below concrete or masonry / apron using chemical at 2.25 ltr per running metre including drilling and punching holes etc, in apron complete with chlorophyriphos or lindane enulsifiable concentrate conforming to IS-8944 or IS-632 all as specified and directed.
200
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area beyond 3 sq. metres complete all as specified and directed.
12
-
-
... More
M&L for factory made single extruded WPC (Wood Polymer Composite) solid door / window, clerestory windows & other Frames / Chowkhat of frame size 65 x 150 mm complete all as specified and directed.
66
-
-
... More
Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part-I) decorative type, core of block board construction with frame of first class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and directed.
23
-
-
... More
S&F, 1.5 mm Decorative laminate type I of surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturers instructions complete all as specified and directed.
45
-
-
... More
S&F, fancy type bright finished brass handles of size 600 mm long with necessary screws complete all as specified and directed.
14
-
-
... More
S&F, bright finished brass butt hinges (light / ordinary type) of size 125 x 70 x 4mm with necessary screws complete all as specified and directed.
18
-
-
... More
S&F, bright finished brass butt hinges (light / ordinary type) of size 100 x 70 x 4mm with necessary screws complete all as specified and directed.
18
-
-
... More
S&F, bright finished brass tower bolts (barrel type) of size 150 x 10mm with necessary screws complete all as specified and directed.
36
-
-
... More
M&L for anodised aluminium sliding door bolt, of size 250 x 16mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS-1868), transparent or dyed to required colour or shade with nuts and screws etc complete all as specified and directed.
5
-
-
... More
S&F, aluminium handles of size 175 x 32mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS-1868), transparent or dyed to required colour and shade with necessary screws etc complete all as specified and directed.
10
-
-
... More
Providing & fixing three track three panels sliding UPVC window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling, the framing section shall be cold form C-type having minimum web depth 89mm x 39mm flange x 11 mm lip in required length as per structure design requirment duly punched with dimple / slot at required location as per approved drawings.
5
-
-
... More
The slots will be along centre line of webs and shall be minimum, (single / double glass panes, wire mesh and silicon sealent shall not be paid separately) complete all as specified and directed.
Note: (a) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
(b) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable.
-
-
-
... More
S&F, aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564 embosed on the body, door weight upto 36 Kgs to 80 Kgs and door width from 701mm to 1000mmm) with double speed adjustment with necessary accessories and screws etc complete all as specified and directed.
12
-
-
... More
Providing & fixing 150mm bright finished floor brass door stopper with rubber cushion necessary brass screws etc, to suit shutter thickness complete all as specified and directed.
14
-
-
... More
S&F, bright finished brass 100mm Mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete all as specified and directed.
12
-
-
... More
S&F, 250mm x 10mm bright finished brass barrel tower bolts (barrel type) with necessary screws etc complete all as specified and directed.
21
-
-
... More
S&F, PVC connection 450 mm long and 15 mm dia to flushing Cistern / sanitary fittings with brass unions complete all as specified and directed.
13
-
-
... More
S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
5
-
-
... More
S&F in repairs pillar taps of long shank fancy type chromium plated for 15mm bore pipes complete all as specified and directed.
8
-
-
... More
S&F, 10 litres capacity white coloured PVC flushing cistern low level with all accessories in repairs including taking down old flushing cistern complete all as specified and directed.
5
-
-
... More
S&F, fancy type chromium plated 15 mm bore stop valves, angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.
13
-
-
... More
S&F, Vitreous China Ware wash down water closet (Pedestal), white (ETWC) incl cover fixed in repairs complete all as specfied and directed.
3
-
-
... More
Providing & fixing white vitreous china water closet squatering pan (Indian type) along with S or P trap Orissa pattern 580mm including dismantling of old WC seats and S or P trap at site complete with all operation including all necessary material labour and disposal of dismantled material including malba, complete all as specified and directed.
2
-
-
... More
S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut / washer complete all as specified and directed.
5
-
-
... More
S&F in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.
5
-
-
... More
S&F, PTMT Grating 100mm dia outlet for nahani trap including fixing with white / colour cement complete all as specified and directed.
10
-
-
... More
S&F in repairs 15mm dia CP fancy type push cock including fittings for urinal pot complete all as specified and directed.
7
-
-
... More
S&F in repair of liquid soap container complete all as specified and directed.
7
-
-
... More
S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed.
3
-
-
... More
M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, including edge moulding & cutting holes for counter sunk WHB fixing in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
5
-
-
... More
S&F, Counter sunk wash hand basin of size 600 x 480mm with all fittings complete all as specified and directed.
8
-
-
... More
S&F, CP bottle trap for wash hand basin with complete fittings complete all as specified and directed.
8
-
-
... More
S&F in repairs of CP Towel ring fixed on wall complete all as specified and directed.
4
-
-
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore complete all as specified and directed.
65
-
-
... More
Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia complete all as specified and directed.
25
-
-
... More
Supply and laying of (16 mm OD) CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed.
25
-
-
... More
Supply and laying of (20 mm OD) CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed.
15
-
-
... More
Supply and laying of (25 mm OD) CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed.
25
-
-
... More
S&F, PVC blind pipe 200 mm dia as per IS: 12818 including taking down complete all as specified and directed.
50
-
-
... More
M&L for painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work in 75 mm diameter pipes complete all as specified and directed.
30
-
-
... More
S&F, 200 mm bore PVC flexible bends of any radius complete all as specified and directed.
10
-
-
... More
S&F, 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
10
-
-
... More
S&F, Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 complete all as specified and directed.
10
-
-
... More
S&F, 75 mm bore PVC (SWR), waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.
10
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.
2000
-
-
... More
M&L for removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete all as specified with white wash one or more coats old surface complete all as specified and directed.
2668
-
-
... More
M&L for wall painting with premium acrylic emulsion having VOC (Volatile organic compound) content less than 50gm/litres approved brand and manafactures, including applying additional coats wherever required to achieve even shade and colour (two coats) complete all as specified and directed.
219
-
-
... More
M&L for two coats of varnish on external srfaces of walls (heritage granual finish) including cleaning of alkali with pressure jet and staining coat and filler coat on surfaces complete all as specified and directed.
2577
-
-
... More
M&L for repairs to ends of chajjas / parapets by removing old concrete, loose material & cleaning of the reinforcement and finishing the surface fair & even in cement mortar 1:3 and making good with existing finishes complete all as specified and directed.
30
-
-
... More
Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant complete all as specified and directed.
215
-
-
... More
Painting with systhetic enamel paint of approved brand and manafacture of required colour to give an even shade one or more coat on old surface complete all as specified and directed.
370
-
-
... More
a) Waterproofing for terrace: Remove the existing Tile and Weathering Course up to the mother slab Cleaning the surface areas thoroughly so that they are free of all contaminants like dirt and laitance & to remove allthe loose materials by various mechanical means. Removal of all surface Imperfections, protrusions, loose concrete & filling of cracks using ShaliCrete Polymer Modified Mortar in the ratio ShaliCrete : Cement : Sand (1:2:5).
b) Providing and making vata at the junction of the walls and the slabs using PMC mortar in the ratio of ShaliCrete : Cement : Sand (1:2:5) using ShaliSBR Latex as the bond coat.
c) Correct all construction joints by grouting with ShaliGrout IP at 1 mapart and opening of joints in 'V' cut groove and fill with PMC mortar using ShaliSBR Latex as the bond coat.
620
-
-
... More
d) Supply and application of ShaliUrethane LHM single component, PU waterproofing coating having 700% elongation with the help of brush or rollers by thoroughly mixing with a power mixer @ 1.2 to1.4 kg / m² in two coats sandwiched with GF mesh / Geotextile Fabric including surface preparation. Broadcasting of 100 mesh sieved sand to be done on the top coat to facilitate adhesion of next layer. The elastomeric membrane having these properties:
Tensile Strength, 28 days, MPa (ASTM D-412): 2; Adhesion to Concrete, MPa (ASTM D-4541): 2.5; Crack Bridging Ability @ 9°C mm (ASTM C-836): Upto 1.5.
e) Top Screed modified with Integral Waterproofing Chemical: Placing a seperation layer of 120 GSM geotextile fabric over the waterproofing membrane and carrying out sloping screed on top of it over the with cement modified @ 0.4% with ShaliPlast LW+ for waterproofing complete all as per manufacturer instructions.
-
-
-
... More
Supply & install, approved Maple / Teak wooden flooring with total thickness 75mm comprising of 20 mm top Maple / Teak solid wood followed by 45mm solid sal wood runner and 10mm rubber pad. Product top finish should prepared with two coats of wooden filler (siller) and appropriate colours and making it smooth with melamine polishing and applying two coats more of freanch polish to get glossy and smooth finish. Structure system should be 10mm thick rubber pad, 45mm thick sal wood runner with the width of 70mm followed by the 20mm top flooring. Top wood plant sizes should be 20mm thick, 130mm wide and 1830mm length. Runners must be placed at a distance of 305mm c/c complete flooring should be treated approved anti termite treatment with 10 years Guarantee. The complete flooring will be laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 : cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 Kg/Sqm complete including taking down the existing flooring all as specified and directed by Engineer-in-Charge.
172
-
-
... More
Cutting / chipping the spalling concrete surfaces of Columns, beams, slabs, cantilevers etc, and trimming, cleaning the surface to receive guniting / plastering complete all as specified and directed.
70
-
-
... More
M&L for applying epoxy treatment for bonding new & old concrete surfaces prior to guniting applying NITO BOND AR chemical (FOSROC chemical) all as specified by manufacturer instructions complete all as specified and directed.
70
-
-
... More
M&L for providing pressure guniting averaging 40 mm thick in cement mortar 1:3 for columns / fins including providing double scaffolding as required and removal of the same on completion of the work as required complete all as specified and directed.
5
-
-
... More
M&L for providing pressure guniting averaging 30 mm thick in cement mortar 1:3 for beams including providing double scaffolding as required and removal of the same on completion of the work as required complete all as specified and directed.
5
-
-
... More
M&L for providing pressure guniting averaging 20 mm thick in cement mortar 1:3 for soffits of slab, complete all as specified and directed including providing double scaffolding as required and removal of the same on completion of the work complete all as specified and directed.
60
-
-
... More
M&L for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed.
10
-
-
... More
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement and including using the water proofing compound for second coat of external / internal plastering incl taking down plastering complete all as specified and directed.
50
-
-
... More
Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.
60
-
-
... More
Dismantling of steel / Asbestos Cement (corrugated, semi corrugated) sheets in roof coverings complete all as specified and directed.
950
-
-
... More
Providing & fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per Is 277, in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micorns sheet should have protective guard film of 25 microns minimum to aviod scratches during transporation and should be supplied in single length upto 12 meter or as desired by Engineer-in-Charge. The sheet shall be be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM seal complete upto any pitch in horizontal / vertical or curved surface excluding the cost or purlins rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed.
900
-
-
... More
Providing & fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete on Ridges plain (500-600mm) complete all as specified and directed.
50
-
-
... More
Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50m lead as per direction of Engineer-in-Charge.
500
-
-
... More
Designing, providing, installing & fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801-1975. The wind load shall be as per provisions of IS 875 (Part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7 / STAAD PRO-V8i / ArchitekV2.5.16 / Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability.
500
-
-
... More
The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633 (13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings.
-
-
-
... More
Design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT.
Note: The quoted rate shall include the cost of the concept design, detailed design, fabrication of sections, transportation, installation and all required for fixing arrangement at site as described above.
-
-
-
... More
M&L for painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete all as specified and directed.
50
-
-
... More
Labour only for remove and refixing after dry wash of auditorium chairs in different position within the auditorium complete all as specified and directed.
Note: The quoted rate shall include the cost of the nut, bolt, washer etc, if any required at site during fixing of chair.
200
-
-
... More
Repairs to auditorium chairs and make good as workable condition including all required materials to be put as required like fabric, recliner spring, hand rests, back rest cushioning with suitable high density foam etc complete all as per ground requirement complete all as specified and directed.
Notes: (i) The quoted rate shall include the cost of removing and refixing of chair.
(ii) The quoted rate shall include cost of the nut, bolt, washer etc, if any required at site during fixing of chair.
300
-
-
... More
S&F, stages side curtain including cost of materials velvet cloth stiching, 200mtrs materials, lining cloth 200 mtrs transportation charges, stiching charges old curtain removing and new curtain refixing, navvaru cotton belt, rings and mechanisim servising apply for L angular greasing and engine oil including cost of all materials and all labour charges for fixing complete all as specified and directed.
1
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead of area beyond 3 sq. metres complete all as specified and directed.
5
-
-
... More
S&F, Hollow Metal Accoustic Steel door made up of pressed galvanised steel frames shall be double rebated profile of size 143 x 57mm out of 1.6mm (16 gauge) minimum galvanized steel sheet frame shall be mitered and field with self tabs, frames to have build grooved sealing system and shall be fitted with EPDM / Intumescent seal frames shall be provided with back plate brackets and anchor fasteners for installation plastered masonry wall opening. Shutter door leaf shall be 46mm thick fully flush doors with an acoustic rating of minimum 39dB without vision lite door leaf shall be manafactured from 1.2mm gauge (18Gauge) minimum thick galvanized steel. The internal construction of doors shall be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be 120kg/m3 High Density Rock wool materials. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for Hinges, locks, door closers for pair of doors integrated astragels has to be provided complete.
26
-
-
... More
Demolishing brick work manually / by mechanical means in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.
2
-
-
... More
Taking down old point wiring complete for light / fan / socket (5/15 Amps) bell point etc complete with all light fittings accessories such as switch sockets 5/15 Amps, ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed.
381
-
-
... More
Taking down old DBs, MCCB, MCBs of any size and capacity & making good to the disturbed surface to match with the existing complete all as specified and directed.
72
-
-
... More
Taking down old sub main wiring / cable of any size and capacity including making good to the disturbed surface to match with the existing complete all as specified and directed.
1520
-
-
... More
M&L for wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit with modular switch, modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc, as required for Group C complete all as specified and directed.
243
-
-
... More
M&L for wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without independent switch etc) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc, as required for Group C complete all as specified and directed.
90
-
-
... More
M&L for wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required complete all as specified and directed.
2
-
-
... More
S&F, suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections as required complete all as specified and directed.
16
-
-
... More
S&F, suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections as required complete all as specified and directed.
30
-
-
... More
S&F, 3 pin 5 A ceiling rose on the existing junction box / wooden block including connections as required complete all as specified and directed.
243
-
-
... More
S&F, modular switch two way 6 Amps on the existing modular plate and switch box including connections but excluding modular plate as required complete all as specified and directed.
4
-
-
... More
M&L for wiring for circuit / submain wiring alongwith earth wire 2 x 1.5 sq.mm + 1 x 1.5 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required for light point, 5 Amps socket, 16 Amps power socket & sub main wiring complete all as specified and directed.
750
-
-
... More
M&L for wiring for circuit / submain wiring alongwith earth wire 2 x 2.5 sq.mm + 1 x 2.5 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required for light point, 5 Amps socket, 16 Amps power socket & sub main wiring complete all as specified and directed.
220
-
-
... More
M&L for wiring for circuit / submain wiring alongwith earth wire 2 x 4 sq.mm + 1 x 4 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required for light point, 5 Amps socket, 16 Amps power socket & sub main wiring complete all as specified and directed.
350
-
-
... More
M&L for wiring for circuit / submain wiring alongwith earth wire 2 x 6 sq.mm + 1 x 6 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required for light point, 5 Amps socket, 16 Amps power socket & sub main wiring complete all as specified and directed.
120
-
-
... More
M&L for wiring for circuit / submain wiring alongwith earth wire 2 x 10 sq.mm + 1 x 10 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required for light point, 5 Amps socket, 16 Amps power socket & sub main wiring complete all as specified and directed.
80
-
-
... More
Taking down old unserviceable exsiting ceiling / wall mounted / exhaust fan of any size and making good to the disturbed surface to match with the existing & deposit in MES storeyard complete all as specified and directed.
5
-
-
... More
S&F, exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm complete all as specified and directed.
3
-
-
... More
S&F, LED lights fitting 1 x 1, 24W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
73
-
-
... More
S&F, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size (FOR TOILET) complete all as specified and directed.
7
-
-
... More
S&F, LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size (FOR HALL) complete all as specified and directed.
43
-
-
... More
S&F, round shape 24 watt, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size (FOR HALL) complete all as specified and directed.
61
-
-
... More
S&F, LED tube light along with fixture, 4 feet, 20 W (FOR ROOMS, TOILET, AC PLANT) complete all as specified and directed.
Make: Crompton cat No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj / Philips / Wipro / Havells / Jaquar / Fortune Arrt / Goldmedal.
45
-
-
... More
S&F, New generation energy saving & environmental friendly, long life, pressure die cast aluminium housing flood light with PC diffused lens enclosure over LED for glare free light of 150 watt high efficient with IP 66 ingress protection (FOR BLDG OUTDOOR LIGHTING) complete all as specified and directed.
Make: Crompton Cat No: LFLN-150-CDL/60-M or equivalent in Bajaj / Philips / Wipro / Havells / Jaquar / Fortune Arrt / Goldmedal.
4
-
-
... More
S&F, exhaust fan, steel body AC single Phase, 230V of size 380mm sweep with blades and frame and louvers complete all as specified and directed.
2
-
-
... More
S&F, New generation energy saving & environmental friendly, long life, pressure die cast aluminium housing flood light with PC diffused lens enclosure over LED for glare free light of 150 watt OF WARM WHITE high efficient with IP 66 ingress protection (FOR STAGE LIGHTING) complete all as specified and directed.
Make: Crompton Cat No: LFLN-150-WW/60-M or equivalent in Bajaj / Philips / Wipro / Havells / Jaquar / Fortune Arrt / Goldmedal.
5
-
-
... More
S&F, 12 way (4 + 36) double door, surface / recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required complete all as specified and directed.
1
-
-
... More
S&F, 8 way (4 + 24) double door, surface / recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required complete all as specified and directed.
Note for Sl item Nos. 118 & 119: Vertical type MCB TPDB is normally used where 3 phase outlets are required.
3
-
-
... More
S&F, 20 A, 240 V, SPN industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A 'C' curve, SP, MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and commissioning as required complete all as specified and directed.
1
-
-
... More
S&F in repair MCCB, AC 415 V, 50 HZ fixed type, capacity 125 Amps, 4 Pole, 36 KA suitable to be fixed in 4/6/8/12 way TPN DB complete all as specified and directed.
1
-
-
... More
S&F in repair MCCB, AC 415 V, 50 HZ fixed type, capacity 100 Amps, 4 Pole, 36 KA suitable to be fixed in 4/6/8/12 way TPN DB complete all as specified and directed.
3
-
-
... More
S&F, MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar complete all as specified and directed.
4
-
-
... More
S&F, MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar complete all as specified and directed.
3
-
-
... More
S&F, SP 5 to 32 Amps rating 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
45
-
-
... More
S&F, SPN 40 Amps rating 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
6
-
-
... More
S&F, SPN 32 Amps rating 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
3
-
-
... More
S&F, MCB TPN 40 Amps 4 Pole with breaking capacity 10 KA along with replacement of old unservceable one complete all as specified and directed.
3
-
-
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc (but with charcoal / coke and salt) as required complete all as specified and directed.
8
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required complete all as specified and directed.
100
-
-
... More
M&L for installing LED step light fitting 6 W fixed in recess of chair including painting of alphabets & numbers complete all as specified and directed.
Make: Crompton Cat No. CBR-611-06-30-SL-CP-NGG (FOR FOOT PATH LIGHT) or equivalent in Bajaj / Philips / Wipro / Havells / Jaquar / Fortune Arrt / Goldmedal.
90
-
-
... More
Supply, install, connect, test & commissioning of Manufacturer / OEM assembled Silent Type (DG) Diesel Engine driven Generating Set having prime power rating of 200 KVA/160 KW at a power factor of 0.8 lagging, 415 Volts, AC, 3 phase, 4 wire, 50 Hz, 1500 RPM, alternator directly coupled with diesel engine, mounted on common base frame complete with an overload capacity of 10% for one hour in every 12 hours operation and Alternator as per IS: 13364 or as amended upto date complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy with Acoustic enclosure with inbuilt fuel tank, fuel line & accessories, PCC foundation work as per manufacture's instructions, anti vibration pads, OEM recommended Standard Panel showing standard parameters of engine & alternator, exhaust pipe & other standard accessories and comprising the following complete as per CPCB-IV norms all as specified and directed.
1
-
-
... More
(A) ENGINE (Prime Mover): Diesel Engine, four stroke, 6 cylinders, liquid / water cooled, turbo charged, air to air after cooled, conforming to ISO 8528, capable of giving adequate BHP not less than 310 BHP at 1500 RPM to drive alternator capable of delivering minimum 200KVA (160 KW) at outdoor atmospheric conditions at Visakapatnam and capable of taking 10% overload for one hour after 12 hours of continuous operation, complete with the standard fittings / fixtures as per manufacturer and following accessories as specified and directed.
Make: Kirloskar / Greaves cotton / Ashok Leyland / Cummins / Caterpillar.
(i) Fly wheel housing and fly wheel.
(ii) Air cleaner dry type replaceable paper element type with restriction indicator.
(iii) Electronic governor.
-
-
-
... More
(iv) Fuel filters as per manufacturers recommendations including water separator, fuel pump, Fuel injection pump (FIP) and injectors. (v) Radiator, Fan & water pump assembly.
(vi) Forced lubrication - Pump, Lub oil filter & Lub oil cooler.
(vii) Exhaust silencer: As per CPCB-II Norms.
(viii) Exhaust gas driven trubo charger.
(ix) First fill lube oil and coolant and diesel during commission and testing.
(B) ALTERNATOR: Alternator shall be self excited, self regulated, brush less for 160 KW / 200 KVA at the speed of 1500 RPM at 415 Volts, 50Hz, three phase, 4 wire system with advance electric voltage regulator to ensure high voltage accuracy with + 0.5 % with class H insulation and enclosure IP 23 ingress protection, directly coupled with engine through flexible coupling and confirming IS-4722 complete - 01 No.
-
-
-
... More
Make of Alternator: Stamford (CGT) / Kirloskar Electric / Jyoti / Alstom / Bharat Bijilee / Crompton Greaves.
(C) BASE FRAME & FOUNDATION: Common base frame for Engine & Alternator made from structural steel channel, PCC foundation including adequate number of suitable anti-vibration pads all as per the recommendation of the manufacture.
(D) ELECTRICAL STARTING SYSTEM: Electric starting system with battery charging alternator and axial type starter motor including adequate number of high capacity maintenance free batteries as recommended by OEM / manufacturer including interconnecting cables / leads with terminals complete with starting / stopping switch, Voltmeter etc - 01 Set.
-
-
-
... More
(E) ACOUSTIC ENCLOSURE: Corrosion resistant, acoustic and weather proof enclosure with durable industrial locking system on doors, doors with gasket made of high quality EDPM Material, with arrangement for fresh air intake for cooling of Engine & Alternator, extraction and discharging of hot air to the atmosphere, made out of CRCA sheet with 11 tank pre treatment process and UV resistant powder coating and high quality noise absorbant & fire retardant grade acoustic insulation material (Rockwool) complying to IS 8183 well suitable for 200 KVA DG set to reduce noise level to 75 dbA, measured at 1.00 meter distance conforming to CPCB IV norms.
-
-
-
... More
Enclosure shall have inbuilt base frame mounted fuel tank of standard capacity as per OEM fabricated out of 14 SWG MS sheet mounted inside the enclosure alongwith fuel piping from tank to engine capacity as recommended by OEM with drain wall, air vent, inlet, outlet connection and suitable exhaust pipe duly cladded with glass wool and covered with aluminum sheet inside the enclosure and exhaust trail pipe with muffer complete all as per manufacture design.
-
-
-
... More
(F) DG SET mounted Microprocessor based Control Panel: Fitted with & having digital display for the following: -
(a) Phase voltages & Currents, frequency, Reverse Power, Gen set KVA, KW, KWH, KVAR, Power factor, Canopy temperature.
(b) Lub Oil Pressure, Engine Temperature, RPM, Run hours, Number of starts, fuel level, Auto / Manual stop, battery charge condition, AMF feature.
(c) Battery charging failure, Over / under speed, Over current, Over / under voltage, over KW, phase seq, phase missing, Mains under voltage, Earth fault trip, Fuel usage alarm.
(d) Low Lub oil pressure, High Engine temperature, Low / High battery voltage, Low fuel level, over crank protection, routine maint indicator, Gen set test facility, Mains frequency.
-
-
-
... More
(G) AMF PANEL: Supply Fabricate, install, connect, test and commissioning of LT AMF & Electrical panel board, AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, outdoor weather proof type, fabricated with 3.15 mm thick mild steel and suitable sized pressed steel frame work, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars of suitable capacity insulated with colored PVC sleeves mounted on suitable insulators and separators, holes drilled for connections including provision of AMF panel & 320 Amps Change over switch chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip / rods insulated, complete mounted on PCC pillars including painting of panel board with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and comprising of the followings:-
-
-
-
... More
(i) MCCB 4 Pole, 415 V, Thermal Magnetic type, 400 Amps with breaking capacity 36 KA - 02 Nos.
(ii) Power Contactors of Capacity 400 A, 4 pole -02 Nos.
(iii) MCB of rating 6 A, 240 volts, SP - 07 Nos.
(iv) MCB of rating 16 A, 240 volts, SP - 04 Nos.
(v) Line Voltage monitor 240 V AC 3P 4 W - 01 No (vi) LED indication lamps 230 V AC 22mm dia in RYB Colour - 06 Nos.
-
-
-
... More
(vii) Aux Contactor 230 V AC MINI 22E - 01 No.
(viii) DC Control ON/OFF selection Switch 2P 2W - 01 (ix) Auto / Manual selection Switch 4P 2W - 01 No
(x) Push Button (Green / Red) of FLAS 22 mm dia-02 (xi) Push Button Selector switch 3 position - 02 Nos.
(xii) Battery Charger of 12 V DC, 10 A - 01 No.
(xiii) Control TB of 2.5 sqmm - 08 Nos.
(xiv) AMF relay 12 V DC - 01 No.
(xv) Ammeter of 15 A DC - 01 No.
(xvi) LCD Multifunction Meter Parameters: V, A, F, PF.
Make: L&T Type DN0-100D Model QUASAR, Description: 3P, 4W IPM 240 V (L-N) 1 A Class 1 FM.
(xvii) Current Transformer of Rating 200/5 A - 03 Nos.
(xviii) Aux Relay 12 V DC 11PINE - 04 Nos.
(xix) 24 Hours Selection Meter 12 V DC - 01 No
(xx) Neutral links of 16 A rating - 03 Nos.
(xxi) LT Copper Control Cable of size 2.5 sqmm 6 core from DG set to AMF panel.
-
-
-
... More
M&L for providing earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised iron earth strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No 3 connected to earth test point all as specified and indicated including testing on complete all as specified and directed.
4
-
-
... More
Providing & fixing of lightening conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. including taking down old unserviceable items as required complete all as specified and directed.
8
-
-
... More
S&F, pipes medium grade of Galvanised iron and laid complete 40 mm dia pipe for fixing air termination rod as pipe of height 1.2 m each complete all as specified and directed.
10
-
-
... More
Fixing of copper / G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required (For vertical run) including taking down old unserviceable items as required complete all as specified and directed.
300
-
-
... More
Providing & fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc, as required including taking down old unserviceable items as required complete all as specified and directed.
160
-
-
... More
Providing & fixing testing joint made of 20 mm x 3 mm thick G.I. strip, 125 mm long with 04 Nos. of G.I. bolts, nuts, chuck nuts and spring washers as required complete all as specified and directed.
8
-
-
... More
M&L for PCC 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size) for foundations filling and mass concrete complete all as specified and directed.
6
-
-
... More
S&F, aviation obstruction light LED type, comprising of aluminium housing with polycarbonate enclosure with 302 LEDs for 360 degree illumination including taking down unserviceable items as required complete all as specified and directed.
1
-
-
... More
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper earth strip 25 x 3 mm as earthing lead by means of bolts, nuts, check nuts & wasshers of GI or steel and connecting to earth dolly all as shown in electrical plate No 3 connected to earth test point all as specified and indicated including testing on complete all as specified and directed.
8
-
-
... More
Jointing copper / G.I. tape (with another copper / GI tape, base of the finial or any other metallic object) by riveting / nut bolting / sweating and soldering etc as required.
15
-
-
... More
Supply, install, testing & commissioning of LT panel board CPRI approved, indoor type cubical, pedestal type, floor mounted factory made, dust and vermin proof, IP-65 fabricated out of CRCA sheet not less than 2.0 mm thick fixed on angle iron frame of size 50 x 50 x 6mm conforming to Fe 410-0, front openable double stud hinged with locking arrangements, lock openable by keys, having chromium plated 19mm dia fancy lock, louvers and air vent, gasket U type for natural flow of air, complete dust and vermin proof and panel fixed with PCC 1:2:4, type B1 (using 20mm graded stone aggregate) platform 60 cm above the ground level and 45 cm below the ground level suitable for 415 Volts, 3 Phase, 4 wire, 50 Hz with copper bus bar of 300 Amps painted with powder coated paint having not less than 100 microns over a coat of zinc chrome primer with seven tank process and general construction confirming to IS-8623 of 1993 comprising the following:-
1
-
-
... More
(a) Copper bus bar 300 Amps cap 4 wire fixed on insulator not less than 1.0 mtr long bus bar - 01 Set.
(b) MCCB, 4P, 160 Amps with fixed thermal release 26 KA at 415 Volts (Incoming) - 01 No.
(c) (Outgoing) MCCB, 4P, 63 Amps with ultimate breaking capacity of 27 KA at 415 Volts with fixed thermal release 25 KA at 415 Volts - 03 Nos.
-
-
-
... More
(d) (Outgoing) MCB SP 5-32 Amps, 16 KA 240 Volts - 45 Nos.
(e) MCB DP 32 Amps, 16 KA - 05 Nos.
(f) Digital Voltmeter 0-500 V of size 96 x 96 mm square with selector switch - 01 No.
(g) Digital Ammeter 0 to 500 A of size 96 x 96 mm square with selector switch - 01 No.
(h) R, Y, B phase indicating lamp assembly with HRC fuse protection - 1.
(j) CT's coils of suitable ratio - 01 Set.
-
-
-
... More
Supply, install, testing & commissioning of LT panel board CPRI approved, indoor type cubical, pedestal type, floor mounted factory made, dust and vermin proof, IP-65 fabricated out of CRCA sheet not less than 2.0 mm thick fixed on angle iron frame of size 50 x 50 x 6mm conforming to Fe 410-0, front openable double stud hinged with locking arrangements, lock openable by keys, having chromium plated 19mm dia fancy lock, louvers and air vent, gasket U type for natural flow of air, complete dust and vermin proof and panel fixed with PCC 1:2:4, type B1 (using 20mm graded stone aggregate) platform 60 cm above the ground level and 45 cm below the ground level suitable for 415 Volts, 3 Phase, 4 wire, 50 Hz with copper bus bar of 1000 Amps painted with powder coated paint having not less than 100 microns over a coat of zinc chrome primer with seven tank process and general construction confirming to IS-8623 of 1993 comprising the following:-
1
-
-
... More
(a) Copper bus bar 1000 Amps cap 4 wire fixed on insulator not less than 1.0 mtr long bus bar - 1 Set.
(b) MCCB, 4P, 630 Amps with fixed thermal release 50 KA at 415 Volts (Incoming) - 01 No.
(c) (Outgoing) MCCB, 4P, 320 Amps with ultimate breaking capacity of 36 KA at 415 Volts with fixed thermal release 36 KA at 415 Volts - 01 No.
(d) (Outgoing) MCCB, 100 Amps, 4P, 415 Volts AC having rupturing capacity 27 KA - 02 Nos.
(e) (Outgoing) MCCB, 63 Amps, 4P, 415 Volts AC having rupturing capacity 27 KA - 04 Nos.
-
-
-
... More
(f) Digital Voltmeter 0-500 V of size 96 x 96 mm square with selector switch - 01 No.
(g) Digital Ammeter 0 to 1000 A of size 96 x 96 mm square with selector switch - 01 No.
(h) R, Y, B phase indicating lamp assembly with HRC fuse protection - 1.
(j) CT's coils of suitable ratio - 01 Set.
-
-
-
... More
Supply, install, testing & commissioning of LT panel board CPRI approved, indoor type cubical, pedestal type, floor mounted factory made, dust and vermin proof, IP-65 fabricated out of CRCA sheet not less than 3.15 mm thick fixed on angle iron frame of size 50 x 50 x 6mm conforming to Fe 410-0, front openable double stud hinged with locking arrangements, lock openable by keys, having chromium plated 19mm dia fancy lock, louvers and air vent, gasket U type for natural flow of air, complete dust and vermin proof and panel fixed with PCC 1:2:4, type B1 (using 20mm graded stone aggregate) platform 60 cm above the ground level and 45 cm below the ground level suitable for 415 Volts, 3 Phase, 4 wire, 50 Hz with copper bus bar of 200 Amps painted with powder coated paint having not less than 100 microns over a coat of zinc chrome primer with seven tank process and general construction confirming to IS-8623 of 1993 comprising the following:-
1
-
-
... More
(a) Copper bus bar 200 Amps cap 4 wire fixed on insulator not less than 1.0 mtr long bus bar - 1 Set.
(b) MCCB, 4P, 100 Amps with fixed thermal release 27 KA at 415 Volts (Incoming) - 01 No.
(c) (Outgoing) MCCB, 4P, 63 Amps with ultimate breaking capacity of 27 KA at 415 Volts with fixed thermal release 27 KA at 415 Volts - 01.
(d) (Outgoing) MCB SP 5-32 Amps, 16 KA 240 Volts - 04 Nos.
(e) (Outgoing) MCB, 32 Amps, SPN, 415 Volts - 01 No.
(f) Digital Voltmeter 0-500 V of size 96 x 96 mm square with selector switch - 01 No.
(g) Digital Ammeter 0 to 200 A of size 96 x 96 mm square with selector switch - 01 No.
(h) R, Y, B phase indicating lamp assembly with HRC fuse protection - 1.
(j) CT's Coils of suitable ratio - 01 Set.
(k) DOL starter 5 HP suitable for submersible motor - 02 Nos.
-
-
-
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required complete all as specified and directed.
6
-
-
... More
Providing & fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections as required complete all as specified and directed.
80
-
-
... More
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth including taking down old cable in soft / loose soil complete all as specified and directed.
146
-
-
... More
M&L for dry sand cushioning to under ground cable intrenches including spreading, levelling and hand punning complete all as specified and directed.
44
-
-
... More
Supply & laying un-reinforced precast concrete cable cover class LV type I, size 250 x 150 x 40mm complete all as specified and directed.
3510
-
-
... More
M&L for plain cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
5.4
-
-
... More
Cutting trench of width 30cm and depth n.exc. 60cm through road / hard standing for laying cable through GI pipe and returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm after laying the cable complete all as specified and directed.
30
-
-
... More
GI tubing light grade 150 mm for cable protection, laid under plinths / floors / roads / paths / culverts or fixed on walls or concealed in walls or along the steel poles by means of M.S.F.I clamps with necessary bolts nuts & washers complete all as specified and directed.
30
-
-
... More
Returning filling in including spreading, levelling, watering and well ramming in layers n exc. 25 cm in thick complete all as specified and directed.
84
-
-
... More
Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
62
-
-
... More
Taking down / out old unserviceable aluminium cable / cross linked poly-ethylene (XLPE) insulated, LT cable of any size from pole / laid in trenches / through pipe in road crossings / paths / drains / ducts / floors / along poles / walls / ceilings / equipments etc, complete all as specified and directed.
580
-
-
... More
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed.
310
-
-
... More
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed.
90
-
-
... More
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core complete all as specified and directed.
180
-
-
... More
S&F, post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
17
-
-
... More
S&F, aesthetically designed hot dipped GI mild 3 meters steel pole with grey powder finish, compatible for all post top range window plasma cut & duly chamfered opening window of 300 x 100 mm for terminal connections & mounting accessories window cover is fitted with allen screws to the pole complete all as specified and directed.
17
-
-
... More
Supply, laying & testing PVC insulated, PVC sheathed cable wire armoured, electric control cables (heavy duty) with stranded copper conductor of size 1.5 sq mm, 2 core, 1100 volts grade complete all as specified and directed.
60
-
-
... More
S&F, SMC junction box of size 250mm x 200mm x 105mm (internal size) IP-65 with 6A MCB SP class 'C' series-01 and 4 way 16 Amps terminal block with 200 A rated bus bar 4 strip mounted on suitable insulators for terminating incoming and outgoing cable 10 sqmm 4 core, locking arrangement, fixing arrangement with necessary MS clamps of FI 25mm x 3mm - 02 Nos with GI bolts, nuts and washers, 6Amps etc, complete all as specified and directed.
17
-
-
... More
M&L for PCC 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) as in coping around pole and bedding including necessary form work complete all as specified and directed.
2
-
-
... More
M&L for 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) complete all as specified and directed.
1
-
-
... More
S&F, 40W flood light with housing made of extruded aluminum with die-cast aluminum end caps electrostatically applied polyester powder coating, high lumen output, exterior rated architectural flood light suitable for facade, lighting applications. The robust mechanical design and high-efficient optical design make it ideal, with RGBW (3000K) dynamic colour. Luminaire is made of 20LED, 40W, 10 degree beam angle, CRI80, SDCM4, Anti-aging and anti-UV high optical efficiency PMMA lenses of Dimensions : 210mm x 140mm x 149mm (with bracket) with tilting adjustability of Tilting angle ± 90°, DMX512 control interface. Luminaire has input voltage range of 220-240 VAC, 50/60Hz, (230Vac/50Hz, full load), operating temperature -40°C to 50°C, IP66 & IK06 protection, Lumen maintenance of 50,000 hrs @ L50 at 35°C. Soft Copy of Catalogues, Test Certificates - Third party LM79, LM80, BIS R number, IES Files, Polar curve, Illuminance diagram, CE and CB is mandatory. The luminaire should have IEC classification as CLASS 1 complete all as specified and directed.
2
-
-
... More
S&F, 40W flood light with housing made of extruded aluminum with die-cast aluminum end caps electrostatically applied polyester powder coating, high lumen output, exterior rated architectural flood light suitable for facade, lighting applications. The robust mechanical design and high-efficient optical design make it ideal with RGBW (3000K) dynamic colour. Luminaire is made of 20LED, 40W, 45 degree beam angle, CRI80, SDCM4, Anti-aging and anti-UV high optical efficiency PMMA lenses of Dimensions : 210mm x 140mm x 149mm (with bracket) with tilting adjustability of Tilting angle ± 90°, DMX512 control interface. Luminaire has input voltage range of 220-240 VAC, 50/60Hz, (230Vac/50Hz, full load), operating temperature -40°C to 50°C, IP66 & IK06 protection, Lumen maintenance of 50,000 hrs @ L50 at 35°C. Soft Copy of Catalogues, Test Certificates - Third party LM79, LM80, BIS R number, IES Files, Polar curve, Illuminance diagram, CE and CB is mandatory. The luminaire should have IEC classification as CLASS 1 complete all as specified and directed.
5
-
-
... More
S&F, surface mounted, exterior-rated LED linearstrip light with 48W / 5m roll with 480lm/m luminaire with all the necessary accesories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. IP65, sealed with anti-UV silicon tube with slot for PCB fixation. CRI80 for better vivid color rendering SDCM5, Robust Design & IP68 rating for outdoor use, with DMX control interface. Luminaire has input voltage range of 220-240 VAC, 50/60Hz, THD20%, operating temperature -40°C to 50°C, IP68 & IK06 protection, Lumen maintenance of 20,000 hrs @ L50 at 35°C. Soft Copy of Catalogues, Test Certificates - Third party LM79, LM80, BIS R Number, IES Files, Polar curve, Illuminance diagram is mandatory complete all as specified and directed.
5
-
-
... More
S&F, IP connector (10 bags) complete all as specified and directed.
1
-
-
... More
Supply of surface mounted, exterior-rated LED linear flood light luminaire made of extruded aluminum with die-cast aluminum end caps, finishing of electrostatically applied polyester powder coating that is designed for wall washing and grazing architectural lighting applications, Dimension of 1000mm x 105mm x 45mm (with bracket), Adjustable ± 95° tilting angle RGBW dynamic colour version, Rated power of 50W with 7.5X27 (A1) degree beam angle, CRI80, SDCM4, Robust Design & IP66 rating for outdoor use with DMX control interface. Luminaire has input voltage range of 220-240 VAC, 50/60Hz, THD20%, operating temperature -40°C to 50°C, IP66 & IK06 protection, Lumen maintenance of 50,000 hrs @ L50 at 35°C with 3 years warranty complete all as specified and directed.
4
-
-
... More
M&L for Leader cable 2m (10 pcs) complete all as specified and directed.
2
-
-
... More
M&L for Jumber cable 2m (10 pcs) complete all as specified and directed.
1
-
-
... More
M&L for Male endcap connector (20 pcs) complete all as specified and directed.
1
-
-
... More
M&L for Female endcap connector (20 pcs) complete all as specified and directed.
1
-
-
... More
S&F, compact yet powerful show storage and playback device made of Polycarbonate material, capable of delivering light shows to installations with up to 340 unique light addresses. It is easy to use - With factory preset shows, custom show-authoring capabilities an intuitive LCD interface, removable SD card storage, and onboard light addressing features, Packaged with ColorPlay 3 light show authoring software - ColorPlay 3 which gives the flexibility to create and manage light shows using fully customizable effects, multi-track editing, timeline layering and transition styles. It supports the optional AuxBox expansion device - AuxBox automatically triggers up to eight iPlayer 3 light shows using any remote triggering device with a dry-contact closure. It has got two DMX output ports, each controlling a universe of 512 DMX channels with input voltage range of 100 - 240 VAC complete all as specified and directed.
1
-
-
... More
S&F, ZXP399 addressing device is a fast and convenient address writing and testing tool for
DMX512 luminaires made of extruded aluminum. The device supports internal test animation for DMX512 addresses verification. The device can automatically write address to a whole group of interconnecting luminaires within minutes. Miniature industrial design, compact size and touch screen. It can be powered by a power bank with a Micro-B type USB port for on-site programming and testing after installation. It has got built-in test animation effects, SD card slot to store animation and scenes, supports Color-pick functions. The input voltage range is 6-24V DC, IP20 protected, warranty of 3 years complete all as specified and directed.
1
-
-
... More
S&F, UPS for 30 min back up of capacity 06 KVA AC input Voltage 160 to 260 V and out put 230V ± 1% single phase online UPS system alongwith 16 Nos of 12 Volts 26 AH battery capacity including suitable stand for batteries & interlink cables complete all as specified and directed.
1
-
-
... More
S&F, Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.
1
-
-
... More
Supplying, installation, testing & commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics / LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 Hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog / digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet / Modbus over IP complete all as specified and directed for Two loop panel.
1
-
-
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character / Touch screen LCD display with inbuilt reset, acknowledge and silence switches as required complete all as specified and directed.
1
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface / recessed MS box having two LED, metallic cover complete with all connections as required complete all as specified and directed.
10
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required complete all as specified and directed.
4
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point as required complete all as specified and directed.
10
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe as required complete all as specified and directed.
4
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required complete all as specified and directed.
4
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module as required complete all as specified and directed.
1
-
-
... More
Supplying & laying of 2 x 1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath as required complete all as specified and directed.
750
-
-
... More
Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns as required complete all as specified and directed.
1
-
-
... More
Supplying, installation, testing & commissioning of ceiling / wall mounted loud speaker, 3/1.5 Watt in ABS enclosure as required complete all as specified and directed.
1
-
-
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections as required complete all as specified and directed.
21
-
-
... More
Providing, laying, testing & commissioning of 100mm dia 'C' class heavy duty MS pipe conforming to IS 1239/IS 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc, and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required complete all as specified and directed.
80
-
-
... More
S&F, single headed external yard Hydrant Valve with 1 No. 63 mm dia instanteneous FM Gun metal coupling and cast iron wheel, ISI marked conforming to IS 5290 (type-A) single headed with blank Gun metal cap and chain as required complete all as specified and directed.
4
-
-
... More
S&F, first-aid Hose Reel 30m long, with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required 20 mm nominal internal dia water hose thermoplastic (textile reinforced) type - 2 as per IS: 12585.20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. pipe and socket complete all as specified and directed.
4
-
-
... More
Construction of brick masonry valve chamber of size 0.9m x 0.9m x 1.0 mtr (internal dimension) above ground level 30 cm suitable for 150/100 mm dia sluice valve, 15 cm thick foundation using PCC 1:4:8 type D2 using 40 mm graded stone aggregate over 15 cm thick hardcore, 23 cm thick brick wall, built in cement and sand mortar 1:4, 15 cm thick internal and external plaster including top of floor in cement and sand mortar 1:3, finished even and smooth, without using extra cement, 3 mm thick mild steel plate cover on 50mm x 50mm x 6mm MS angle iron frame embedded in PCC 1:2:4 type B1 using 10 mm graded stone aggregate coping having rectangular hinged opening of size with locking arrangement & handle made out of 10mm dia MS round bar, hold fasts etc, applying one coats of red oxide primer and two coats of synthetic enamelled paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exc. 50 mtr complete all as specified and directed.
1
-
-
... More
S&F, valves, sluice flanged of class 1.6 PN, 100 mm (4") dia complete all as specified and directed.
1
-
-
... More
M&L for cutting in position existing 100 mm bore MS pipe and tapping in position for taking the branch connection of size 100 mm, supply and installation of suitable MS tee including all ends suitable size of reducer, flanges complete as required as per site condition nuts & bolts, washers etc for tapping out branch connection including complete all as specified and directed.
1
-
-
... More
Supply, installation, balancing replacement & commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of 0.80mm sheet thickness as required complete all as specified and directed.
50
-
-
... More
Supply, installation, balancing replacement & commissioning of factory fabricated GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of 0.63mm sheet thickness as required complete all as specified and directed.
50
-
-
... More
Supplying, fixing, testing, replacement & commissioning of supply air diffusers of size 600 mm of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core complete all as specified and directed.
5
-
-
... More
S&F, powder coated extruded aluminium supply Air Grills of size with aluminium volume control dampers as per specifications complete all as specified and directed.
6
-
-
... More
S&F, powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers as required complete all as specified and directed.
16
-
-
... More
S&F, acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³ with 25 mm x 25 mm GI section of 1.25 mm thick at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc, complete as required and as per specifications complete all as specified and directed.
88
-
-
... More
S&F, 25mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class 'O') insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required complete all as specified and directed.
200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements