Military Engineer Services Tender

[j] The contractor is responsible for making subscription towards Insurance, EPF, ESI, Labour Welfare Cess etc., as applicable and shall pay Gratuity, Bonus etc to the Workmen as per existing Labour Rules / Acts / Regulations and rate quoted shall be deemed to be included for the same. [k] DRESS CODE: The contractor shall provide the workmen with Dark Blue Colour Uniform [Formal Pant & T-Shirt] with labels showing / printed i.e. "Name of the Firm and Designation" on Front and "GE [U-II] [V]" on the back of the T-Shirt along with protective clothing / gear. The contractor shall also provide shoes to the workers and the persons shall not be allowed to enter the work site without wearing shoes. [l] The contractor shall be responsible for all Accidents / Injuries happening to the workmen. Any accident causing Minor / Fatal Injury, Partial Disability due to any untoward incident or non-adherence to Safety and IE Regulations or fault in maintaining of Lifts System / Safety Mechanism or on account of any mishandling / wrong operation / lack of knowledge of safety precautions or on account of any circumstances beyond his/their control, the contractor shall be solely responsible for settling all claims of compensation to the deceased, failing which department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Contractor shall provide first aid boxes to meet any emergency situations. [m] The contractor shall carryout the comprehensive maintenance of the lifts catered under subject work through the Original Equipment Manufacturer of that lift or from their accredited / authorised agencies only. The lowest bidder shall submit MoU from the Original Equipment Manufacturer of the Lift or from their accredited / authorised agencies to provide technical support and trained persons for maintenance & testing and to provide spares required before commencement of the work to GE. The spares shall be of the make as per existing or as specified herein after or as per the OEM.

Supply only Floor Relay Oscillator Switch, Optical type working on 12/24 Volts, DC complete all as specified and as directed. Make: Electronic Switches / Orbital / IES

Supply only Main Power Contactor with Coil, 60 Amps , Power Contactor with 2 NO + 2NC Auxiliary Contacts and with 230 Volts, DC Coil complete all as specified and as directed. Make: Siemens / Telemecanique / C & S / ABB

Supply only Trailing Cable 10 Core X 0.75 Sq.mm complete all as specified and as directed. Make: Universal / RR Kable / Umesh

Supply only Main Hoist Steel Rope of size 13 mm, Heavy Duty complete all as specified and as directed.

Supply only Microprocessor L 40 BWA complete all as specified and as directed. Make: Allen Bradley

Supply only Input Module 24 Volts DC I/P or Potential Free Relay O/P Contact to match with Micrologix 1200 complete all as specified and as directed. Make: Allen Bradley

Supply only Full Length Infrared Sensor 64 Beams for Car Door including Transmitter, Receiver and Control Unit working on 230 Volts, AC complete all as specified and as directed. Make: Cedes / TL Jones / IES / Escon / Johnson / Bharat Bijlee / Otis

Supply only Charger Card of Automatic Rescue Device 230 Volts Input/72 Volts Output complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Converter Card of Automatic Rescue Device to Convert 72 Volts DC Input to 24 Volts DC Output for Control Circuit complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Mosfet Card of Automatic Rescue Device to covert 72 Volts DC to 230 Volts AC 3 Amps Rating complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Rotary Encoder for Speed feedback of Main Drive complete all as specified and as directed.

Supply only Door Motor with Built-in Rotary Encoder and suitable VVVF Drive for Car Door operation complete all as specified and as directed. Make: Toshiba / Monarch

Supply only VVVF Drive 11 KW to 15 KW for Lift Motor of 9 KW to 11 KW including feeding all parameters and interfacing with Controller Micro Processor and Drive including setting of basic parameters to obtain the desired and designed value of various motions of the lift complete all as per manufacturer's instructions, complete all as specified and as directed. Make: Toshiba / Gefron/ Square-D / ABB [a] Input Voltage: 380 to 460 Volts [b] Phase: 3 Phase [c] Motor Power in KW: 11 KW [d] Capacity in KVA: 55.04 KVA

Supply only Micro Processor based Controller for full collective operation to match existing Auto Door Lift including software development complete all as to match existing one side opening lift up to G+9 Floor including Input Output Modules complete all as specified and as directed. Make: Allen Bradley / IES/ Toshiba

Supply only Automatic Rescue Device of Microprocessor based control with VVVF Drive, ISI marked for Power Control, Battery backup of 72 Volts with Battery Charging Unit / Circuit, Inverter Circuits with Transformer for break door control including provision of all indications like Battery Charging, Rescue Operations ON / OFF, Lift Moving Up / Down, Safety complete for the safe and satisfactory operation of the ARD suitable for 8/13Passenger Lift of multi-storeyed Buildings up to G+9 Floors complete all as specified and as directed. Make: As per OEM

Supply only Gear Box suitable for 8 Passenger Lifts with 1.5 MPS serving G+9 Floors with a travel of 30 Metres along with Traction Sheave and testing all as per manufacturer’s instructions complete all as specified and as directed. Make: As per OEM

Supply only Induction Motor 3 Phase suitable for Gear Box of 8 Passenger Lifts along with Break Assembly and Drum including testing all as per manufacturer’s instructions complete all as specified and as directed. Make: As per OEM

Supply only MS Base and Rubber Base for fixing Gear and Motor complete all as specified and as directed. Make: As per OEM

Supply only Auto door Car operator for 800mm wide centre opening door of lifts including Motor with Built-in Rotary Encoder, VVVF Drive for Car door operation & Full length Infra red sensor 64 beams for car door, transmitter, Receiver and Control Unit working on 230 Volts, 50 Hz, AC Supply complete all as specified and as directed Make: FERMATOR / IES / As per OEM

Supply only Auto door Car operator for 900mm wide side opening door of lifts including Motor with Built-in Rotary Encoder, VVVF Drive for Car door operation & Full length Infra red sensor 64 beams for car door, transmitter, Receiver and Control Unit working on 230 Volts, 50 Hz, AC Supply complete all as specified and as directed Make: FERMATOR / IES / As per OEM

Supply only Auto Door Landing Mechanism of 800 mm wide Center Opening Door along with Bottom Aluminium Cill complete all as specified and as directed. Make: Fermator / IES / As per OEM.

Supply only Auto Door Landing Mechanism of 900 mm wide Side Opening Door along with Bottom Aluminium Cill complete all as specified and as directed. Make: Fermator / IES / As per OEM.

Supply only COP [Cabin Operating Panels] made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick including Digital car position indicators with Buttons, Lock, all relevant features alongwith control wires complete all as specified and as directed. Make: Johnson/ IES/ As per OEM

Supply only LOP [Landing Operating Panels] made out of AISI 304 Grade Stainless Steel Sheet of 1.5mm thick including Digital car position indicators with Buttons, Lock, all relevant features alongwith control wires complete all as specified and as directed. Make: Johnson/ IES/ As per OEM

Supply only Stainless steel false ceiling suitable for 8 Passenger lift, made out of 0.8mm thick AISI Grade Stainless steel sheets including provision of 4 Nos. of 5 Watt LED downlights and fan grill complete all as specified and as directed by Engineer-in-Charge.

Supply only Stainless steel false ceiling suitable for 13 Passenger lift, made out of 0.8mm thick AISI Grade Stainless steel sheets including 4 Nos. of 6 Watt LED downlights and fan grill complete all as specified and as directed by Engineer-in-Charge.

M & L for Rewinding Main Motor of 9 KW Capacity, 3 Phase, 380 Volts, 1300/325 RPM using super enamelled copper conductor of suitable gauge including insulation, varnishing, packing and testing etc, cleaning, greasing etc. and testing including replacement of nuts and bolts for foundation etc. complete all as specified and as directed.

M & L for Rewinding Main Motor of 11 KW Capacity, 3 Phase, 380 Volts, 1300/325 RPM using super enamelled copper conductor of suitable gauge including insulation, varnishing, packing and testing etc, cleaning, greasing etc. and testing including replacement of nuts and bolts for foundation etc. complete all as specified and as directed.

Supply and fix 1.5mm thick homogenious PVC sheets,any pattern/ colour, fixed with approved rubber based adhesive as in floors complete all as specified and as directed.

Supply and fix Acrylic Sandwich Sheet Board of size 12"x18"x 3mm thickness, transparent type, with top and base plates, as in display board, fixed to wall with brass screws complete all as specified and as directed.