Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil Works Others
Eprocure
Opening Date24 Dec 2024
Closing Date21 Jan 2025
Tender Amount₹ 45,00,00,000
Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_690290_1Tender No
85439Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(b) False ceiling of Rooms of Leans at GF, FF & SF: Providing & fixing suspended ceiling with 15 mm thick SONEX Microfibre Acoustic Tiles made of Pine wood chips /slivers in size : 595 x 595 mm with min 600 kg/Cum density with NRC of 0.45 and relative humidity 50.0 with SAC IS: 8225-1987 eqvl to ISO 354-1985 & astm 423-90A above the Microfibre tile ise 50 mm thick 1400 GSM or 28d-50 mm thick MEXCON BATTS and for installation of tile SMC select grid sections size of 24 mm x 38 mm with butterfly clips and 10 mm x 100 mm Anchor fastener HILTI /Fisher (for installation use Hilti/Fisher Anchor fasteners with butterfly clips and til colour as per interior, Architect & acoustic consultant guide line only). (c) Providing & fixing Acoustic Doors Make AI/HILPO/AVI/IAC : Frame work consists of wooden sections size of 150 mm x 75 mm (Nominal finished frame section of 143 mm x 65 mm) with nself adhesive type Perimeter seals on the perimeters of the frame (Note: Shutter is Double edged). Fixing arrangements shall be by means of 4 Nos of G.I hold fast 225 mm x 20 mm x 4mm with spilt end on either side of the wall or 06 Nos of Fisher screws of 125 mm x 6 mm including 5 Nos of stainless steel ball bearing hinges of ss 304 quality of size 124 mm x 124 mm x3 mm thick to capable of taking load upto 120 kg of the shutter with ss pin, lock strike plate shock absorbers as specified.
Door shutter: 72 mm thick of size as mentioned below made out of perimeter railing of seasoned Red Marenti/Hard wood (Moisture contain limited to 18 %) size of 100 mmx 30 mm and AIC/AI/AVI Silenz of 4 mm thick fixed either sides of board on each side of the shutter frame work using suitable fasteners and duly HOT PRESSED with 16 mm HDF of density 850 kg/m3 to get the require surface for laminate/Veneer/Paints.
Vision panel: Vision panel formed of DGU using laminated Glass of thickness 13.2 mm either sides (2 layer of 6 mm toughened glass +1.2 mm Lamination) 22 mm Air gap. The glass and door edges must be appropriately sealed using acoustic sealants.
-
-
-
... More
Door shutter: 72 mm thick of size as mentioned below made out of perimeter railing of seasoned Red Marenti/Hard wood (Moisture contain limited to 18 %) size of 100 mmx 30 mm and AIC/AI/AVI Silenz of 4 mm thick fixed either sides of board on each side of the shutter frame work using suitable fasteners and duly HOT PRESSED with 16 mm HDF of density 850 kg/m3 to get the require surface for laminate/Veneer/Paints.
Vision panel: Vision panel formed of DGU using laminated Glass of thickness 13.2 mm either sides (2 layer of 6 mm toughened glass +1.2 mm Lamination) 22 mm Air gap. The glass and door edges must be appropriately sealed using acoustic sealants. Cavity filling: Cavity is filled with 140 density x 30 mm thick AI /IAC / AVI Fiber panel.
Seals: Door shall be provided with acoustic perimeter, compression seal & dropdown seals ass IAC/AI/AVI standard.
Colour:/finishes: Leaf and frame to be polyster powder coated to standard RAL Colors if required. Acoustic rating : RW (C, Ctr) 48 (-2, -6) dB to achive min RW 48 dB to achive min NC 49 once installed (subject to flaking).
-
-
-
... More
(d) Providing & fixing of LIKI WINDOWS SYSTEMS series of 130Z-K Aluminium profiles with powder coating, Triple layered glazing unit, Multi point locking system and five layered EPDM gasket sealing 6 mm + 18 AR 6 MM +1.52 PVB + 8 MM fully tempered clear Glass and thickness of window must be 750 mm, window handles: HOPPE HANDLE (Made by EUROPE) with all aluminum profiles are 6063-T5 grade and thickness of profiles 2 - 5 mm as per Euro standard profiles with Glasses are three layered tempered ( 6 mm + 18 Ar + 6 mm + 1.52 mm PVB + 8 mm) withn Argon filled, finish of window profiles as surface finish is powder DIOIO series from AKZONOBEL (European Standard). For installation check relevant technical drawings and details. Note : Certified perfomance by Acoustic consultant. The bldgs shll be designed and planned for GRIHA Norms. On completion of project the provisional and final certifiaction of the bldg for gRIHA 3 star rating shall be obtained by the contractor. All steps necessary for obtaining GRIHA 3 star rating such as processing of the application for GRIHA payment of the facilition of the GRIHA team for site visit etc shall be borne by the contractor.
-
-
-
... More
Construction of covered parking garage with permanent specifications with RCC framed structure in RCC M30 grade concrete, Fly ash brick wall in CM 1:6 RCC roof provided with water proofing treatement including internal electric supply all as per drawings & as specified.
1
-
-
... More
Construction of Pump House including UG Sump with permanent specifications with RCC framed structure in RCC M30 grade concrete, fly ash brick Masonary in CM 1:6, powder coated Aluminium windows , RCC roof provided with water proofing treatment, including water supply, internal electric supply. Complete all as per drg & as specified.
1
-
-
... More
Construction of POL store with permanent specifications with RCC framed structure in RCC M30 grade concrete, fly ash brick Masonary in CM 1:6, powder coated Aluminium windows RCC roof provided with water proofing treatment, inlcuding water supply, internal electric supply. Complete all as per drg & as specified.
1
-
-
... More
Schedule "A" Part – II to Schedule "A" Part – XVII:
NOTE: Schedule "A" Part – II to Part – XVII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only
-
-
-
... More
Lumpsum price worked out by the contractor for "Site Clearance / Area Development / Earthwork Excavation", as listed in Schedule "A" Part – II .
1
6896681
-
... More
Lumpsum price worked out by the contractor for "Internal Electrification", as listed in Schedule "A" Part – III .
1
604941
-
... More
Lumpsum price worked out by the contractor for "Internal Water Supply", as listed in Schedule "A" Part – IV .
1
115911
-
... More
Lumpsum price worked out by the contractor for "Sewage Disposal", as listed in Schedule "A" Part – V .
1
409919
-
... More
Lumpsum price worked out by the contractor for" External Water Supply", as listed in Schedule "A" Part – VI .
1
383013
-
... More
Lumpsum price worked out by the contractor for "External Electrification" as listed in Schedule "A" Part – VII
1
2913851
-
... More
Lumpsum price worked out by the contractor for "Road / Path / Culvert", as listed in Schedule "A" Part – VIII .
1
2556354
-
... More
Lumpsum price worked out by the contractor for "Area Drainage", as listed in Schedule "A" Part – IX
1
3601120
-
... More
Lumpsum price worked out by the contractor for " Air conditioning", as listed in Schedule "A" Part – X
1
912230
-
... More
Lumpsum price worked out by the contractor for "Fire fightinh/ fire alarm system", as listed in Schedule "A" Part – XI
1
6518542
-
... More
Lumpsum price worked out by the contractor for "EOT Crane", as listed in Schedule "A" Part – XII
1
13845
-
... More
Lumpsum price worked out by the contractor for "Lightning Protection", as listed in Schedule "A" Part – XIII
1
233160
-
... More
Lumpsum price worked out by the contractor for "Soil stabilization/ Rigid pavement", as listed in Schedule "A" Part – XIV
1
15389771
-
... More
Lumpsum price worked out by the contractor for "Telephone", as listed in Schedule "A" Part – XV
1
30080
-
... More
Lumpsum price worked out by the contractor for "Cooling Appliances", as listed in Schedule "A" Part – XVI
1
260462
-
... More
Lumpsum price worked out by the contractor for "Pile Foundation", as listed in Schedule "A" Part – XVII
1
30126609
-
... More
Schedule "A" Part - XVIII [Miscellaneous Items]
-
-
-
... More
INTERNAL ELECTRIFICATION
-
-
-
... More
Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Pressed Metal Flush Box made out of 2mm thick MS Sheets of suitable size for mounting modular brackets, including modular brackets and plates as required at site for fixing modular switches, fittings, regulators etc concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified.
393
-
-
... More
All as per Serial Item No. 21 above but One 3 Pin Switch Socket Outlet 5 Amps on same board complete all as specified.
45
-
-
... More
All as per Serial Item No. 21 above but one 3 Pin Switch Socket Outlet 16 Amps on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.
98
-
-
... More
All as per Serial Item No. 21 above but one 3 Pin Switch Socket Outlet 16 Amps on independent board, with 1100 Volts, FRLS grade, 4.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.
88
-
-
... More
All as per item No.21 here-in-before but controlled by two two way switch complete all as specefied and directed.
12
-
-
... More
Supply and fixing of ceiling fan complete with blades, down rod and other accessories, AC 230 Volts, 1200 mm sweep, min air delivary 210 CFM with service value 6.00, BEE, 5 star rated with brushless direct current motor [BLDC] including connecting with 1.0 Sqmm, 2 core copper conductor from ceiling rose complete all as specified and as directed.
99
-
-
... More
Supply and fixing exhaust fan, 250mm sweep, plastic body, heavy duty with louvers, AC single phase, 230 volts, connection with 1.0 sqmm copper conductor flexible wire from ceiling rose including making necessary opening and making good the disturbed surface complete all as specified and as directed.
10
-
-
... More
Supply and fixing exhaust fan, 300mm sweep, mettallic body 900 RPM heavy duty with louvers, AC single phase, 230 volts including connection with 0.5 sqmm copper conductor flexible wire from ceiling rose complete all as specified and as directed.
10
-
-
... More
S&F energy efficient LED Tube light fitting with tube 5W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed
11
-
-
... More
S&F energy efficient LED Tube light fitting with tube 10W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed
11
-
-
... More
S&F energy efficient LED Tube light fitting with tube 18/20W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed
286
-
-
... More
S&F energy efficient LED Tube light fitting with tube 2x20W or nearest size, 240 Volts, 50 Hz, surface mounted, decorative ultra slim square profile LED light fixture with extruded polycorbonate environmental friendly, energy efficient ready to use pack of complete mounting brackets including connecting up with 1.0 Sqmm 3 core flexible copper conductor cable complete all as specified as directed
15
-
-
... More
LED Security light fitting with tube 25 W new generation energy saving & environmental friendly long life versatile pressure die cast aluminium Luminaire with mid power LEDs as source and HF electronic driver pre wired with 1.5 Sq.mm copper conductor cable up to connector including 2m long GI tubing medium grade 32mm dia bend to required shape fixing on wall with suitable MS brackets complete all as specified and directed.
15
-
-
... More
Supply and fix energy efficient LED suspended light fitting [high bay light] with 90 Watt LED including all holding mechanism, 240 Volts, 50 Hz, luminous efficiency 120 Lumen per Watt, CRI80, PF0.9, surface mounted, IP 54 decorative ultra slim square profile LED lighting fixture etc., complete with mounting bracket etc., including connecting up with 1.5 Sq.mm, 3 core flexible copper conductor complete all as specified and as directed.
120
-
-
... More
Supply and fix energy efficient LED ultra modern recess mount light fitting with high brightness SMD LED's as light source, 28 watts, 240 Volts, 50 Hz environmental friendly, suitable for grid ceiling complete with mounting bracket etc., including connecting up with 1.0 Sq.mm, 3 core flexible copper conductor complete all as specified and as directed.
15
-
-
... More
Supply and fix energy efficient LED surface 2x2 grid panel light fitting , 34 watts, 240 Volts, 50 Hz environmental friendly, suitable for porch light complete with mounting bracket etc., including connecting up with 1.0 Sq.mm, 3 core flexible copper conductor complete all as specified and as directed.
4
-
-
... More
Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. [Note: 3 runs of 2.5 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit]
1800
-
-
... More
Sub main wiring with 2 runs of single core 4.0 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. [Note: 3 runs of 4.0 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit]
220
-
-
... More
Sub main wiring with 2 runs of single core 6.0 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. [Note: 3 runs of 6.0 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit]
845
-
-
... More
Sub main wiring with 4 runs of single core 6.0 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. [Note: 5 runs of 6.0 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit]
120
-
-
... More
Sub main wiring with 4 runs of single core 10.0 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 10.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. [Note: 5 runs of 10.0 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit]
25
-
-
... More
S & F MCCB DB, vertical double door, TPN, 4 way, sheet steel, with 200 Amps rated bus bar, 415 Volts, 50 Hz, IP : 43 protection,concealed in walls, including provision of MCCB FP , 10 KA as incommer and outgoing circuits, filling the empty with blanks, making good the disturbed area as per existing surface complete all as specified and as directed.
7
-
-
... More
S & F MCCB DB, double door, TPN, 4 way, sheet steel, with 200 Amps rated bus bar, 415 Volts, 50 Hz, IP : 43 protection,concealed in walls, including provision for fixing MCB TPN, 10 KA as incommer and outgoing circuits, filling the empty with blanks, making good the disturbed area as per existing surface complete all as specified and as directed.
4
-
-
... More
MCB TPN, 63 Amp, 'C' Curve, 415 Volts, 10 KA breaking capacity complete all as specified.
1
-
-
... More
MCB TP, 63 Amp, 'C' Curve, 415 Volts, 10 KA breaking capacity complete all as specified.
1
-
-
... More
MCB TPN, 32 Amp, 'C' Curve, 415 Volts, 10 KA breaking capacity complete all as specified.
3
-
-
... More
MCB TP, 32 Amp, 'C' Curve, 415 Volts, 10 KA breaking capacity complete all as specified.
3
-
-
... More
Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.
14
-
-
... More
Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed.
72
-
-
... More
INTERNAL WATER SUPPLY
-
-
-
... More
S & F 15 mm dia bib tap two way, fancy type screwed down and fixed suitable for 16 mm inner dia CPVC pipe complete all as specified and as directed.
8
-
-
... More
S & F Angle stop valve, chromium plated, fancy type, screwed down, high pressure screwed and fixed, suitable for 20mm outer dia CPVC pipes complete all as specified and as directed.
16
-
-
... More
S & F 15 mm health faucet, chromium plated, fancy type with steel flexible complete suitable for 16 mm outer dia CPVC pipe complete all as specified and as directed.
8
-
-
... More
SEWAGE DISPOSAL
-
-
-
... More
M&L for Cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming toothings for and bonding new work in mortar into old work, including new materials entering old wall including necessary excavation, earthwork etc., complete all as specified and directed.
0.25
-
-
... More
EXTERNAL WATER SUPPLY
-
-
-
... More
Supply and lay 100 mm bore Ductile Iron Pressure Pipes, Centrifugally Cast [Spun], Class "K-7" with Socket and Spigot ends conforming to IS - 8329 in standard lengths suitable for Push-On Rubber Gasket Jointing with inside Cement Mortar Lining and Black Bitumen external coating complete all as specified and as directed.
250
-
-
... More
Supply, install, testing and commissioning of monoblock pump set 3 HP, discharge 1400 LPM, head not less than 60 metre with delivery size of 80 mm bore, 415 Volts, 50 Hz, AC 3 Phase supply, electric driven, inclusive of air valve at delivery, pressure guage along with cabling by XLPE copper cables from starter to pump set with cable tray and PCC foundation complete all as specified and as directed.
2
-
-
... More
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.
40
-
-
... More
M & L for masonry valve chamber of size 1000 X 1000 X 1000 mm [interanl dimensions] comprising of 50mm thick PCC for valve including excavation and earth work in any type of soil and 200 mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type B1 couping 50 x50x6 mm angle iron 3 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
4
-
-
... More
Cutting existing steel tubing of 150 mm dia for alterations or additions necessarily done in position without taking down, dewatering for inserting flanged sockets, 'Tee' with reducer to 150 x 150 x 100 mm etc., for tapping complete all as specified and directed.
1
-
-
... More
EXTERNAL ELECTRIC SUPPLY
-
-
-
... More
Supply, fabricate, errect, install and commissioning of 2 Pole structure with steel swaged pole 11m long complete with cast iron base plate,finial taper plug, bolts, nuts and screws as specified, Type 410, SP-55 including excavation and earth work, PCC 1:4:8 Type-D2 foundation, PCC 1:3:6 Type-C1 coping and bedding, Cross arms, angle supports, Clamps, anti climbing device, danger notice board etc complete all as specified and directed.
1
-
-
... More
Supply, install, testing and commissioning of 11 kV outdoor Compact Sub Station in compliance with IEC 62271-202 with Transformer 630 kVA, 11 kV/433 V, DYn11 conforming to IS 2026 and IS 1180, Dry Type, energy efficiency level-2, copper wound with off circuit tap links of range +/- 7.5 % in steps of 2.5 %, class of insulation F, temp rise over ambient temp of max 50 degrees C, losses and % impedence as per ECBC 2017, insulation class F including HT and LT switchgears, the enclosure having IP 54 degree Of protection for HT and LT switch gear compartment and IP 23 degree of protection for transformer compartment shall be minImum of 1.5 thick powder coated/wet polyurethane painted GI sheet mounted on hot galvanised 4 mm thick GI base frame and with partially modular design of GI sheet fastened by reveting, the partion between compartments shall be minimum 1.5 mm thick, rated temp class for transformer compartment shall be k10 and lower as shall be designed for natural ventilation and with thermal class K20, roof should be designed to support min load of 250 Kg/sqm, gaskets/stiffeners shall be provided as required, proper interlocking arrangements for safety of operator and to avoid corrosion, door should have stainless hinges, the whole structure shall be fitted with lifting beams/hooks for easy installation at site.
1
-
-
... More
Supply, Install, testing and commissioning of front operated dead front cubicle type compartmentalised LT outdoor panel board, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switch boards suitable for use at 415 volts, 3 phase, 4 wire, 50 Hz system, fabricated from not less than 3.15 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/ channel /T/ flat sections, danger notice plate, including 3 mm thick gland plates on top and bottom and including lifting hooks and including 2 Nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with inter connections etc., as per IS : 8623 tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz, 415 V, 3000 Amps capacity complete of all specifications, panel should hold Type Test certificate (CPRI) with switchgear assemblies as per IEC60 439-1 with and including the following complete all as specified and as directed.
Note: Drawing of the panel board shall be approved by GE.
1
-
-
... More
(a) ACB 4 Pole, 415 V, 50 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 1000 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 01 No.
(b) MCCB 4 Pole, 415 V, 36 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 500 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 03 Nos.
(c) MCCB 4 Pole, 415 V, 36 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 320 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos.
(d) MCCB 4 Pole, 415 V, 25 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 160 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos.
-
-
-
... More
(e) Supply and fix RCBO TPN 4P 32A 100mA 10ka Ccurve -02 Nos
(f) Intelligent Panel meter to measure voltage, current, frequency, power factor, kWH, etc with all connected CTs of each breakers
(g) LED Indicating Lamps for each phase with colour coed Red Yellow Blue for R, Y and B Phases for each breakers-06 sets
-
-
-
... More
Supply, install, testing and commissioning of front operated dead front cubicle type compartmentalised LT outdoor panel board , rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hz system, fabricated from not less than 3.15 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/ channel/ T/ flat sections, danger notice plate, including 3 mm thick gland plates on top and bottom and including lifting hooks and including 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per IS : 8623 tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 800 A capacity, panel should hold Type Test certificate (CPRI) with switchgear assemblies as per IEC60 439-1 with and including the following complete all as specified and as directed.
Note: Drawing of the panel board shall be approved by GE.
1
-
-
... More
(a) MCCB 4 Pole, 415 Volts, 36 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 320 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 01 Nos
(b) MCCB 4 Pole, 415 V, 25 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 100 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos (c)MCCB 4 Pole, 415 V, 25 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 80 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos (d) MCCB 4 Pole, 415 V, 25 KA (ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 63 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 04 Nos
-
-
-
... More
(e) Intelligent Panel meter to measure voltage, current, frequency, power factor, etc with all connected CTs of each breakers
(f) LED Indicating Lamps for each phase with colour coed Red Yellow Blue for R, Y and B Phases for each breakers -06 sets
-
-
-
... More
Supply, install, testing and commissioning of front operated dead front cubicle type compartmentalised LT outdoor panel board, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 Volts, 3 phase, 4 wire, 50 Hz system, fabricated from not less than 3.15 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/ channel/ T/ flat sections, danger notice plate, including 3 mm thick gland plates on top and bottom and including lifting hooks and including 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per IS : 8623 tinned copper bus bar with insulators suitable for three phase, four wire, LT AC, 50 Hz, 415 V, 800 A capacity, panel should hold Type Test certificate (CPRI) with switchgear assemblies as per IEC60 439-1 wwith and including the following complete all as specified and as directed.
Note: Drawing of the panel board shall be approved by GE.
1
-
-
... More
(a) MCCB 4 Pole, 415 V, 36 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 500 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 01 Nos
(b) MCCB 4 Pole, 415 V, 25 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 125 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 03 Nos (c)MCCB 4 Pole, 415 V, 25 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 100 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos (d)MCCB 4 Pole, 415 V, 25 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 63 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos
-
-
-
... More
(e) MCCB 4 Pole, 415 V, 16 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 40 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos (f) Intelligent Panel meter to measure voltage, current, frequency, power factor, etc with all connected CTs of each breakers
(g) LED Indicating Lamps for each phase with colour coed Red Yellow Blue for R, Y and B Phases for each breakers -05 sets
-
-
-
... More
Supply, install, testing and commissioning of front operated dead front cubicle type compartmentalised LT outdoor panel board , rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hz system, fabricated from not less than 3.15 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections, danger notice plate, including 3 mm thick gland plates on top and bottom and including lifting hooks and including 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per IS : 8623 tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 800 A capacity, panel should hold Type Test certificate (CPRI) with switch gear assemblies as per IEC60 439-1 with with and including the following complete all as specified and as directed.
Note: Drawing of the panel board shall be approved by GE.
1
-
-
... More
(a) MCCB 4 Pole, 415 V, 25 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 200 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 01 Nos
(b) MCCB 4 Pole, 415 V, 16 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 160 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 02 Nos (c) MCCB 4 Pole, 415 V, 16 KA(ICS=ICU=ICW for 1 Sec), with microprocessor release (EDO type) of capacity 32 Amps, with adjustable type overload protection, short circuit protection, with inbuilt display for 20 fault history current parameters and necessary CTs, meters and cable boxes. - 04 Nos (d) MCB TPN 32 A 'C' Curve - 02 (e) LED Indicating Lamps for each phase with colour coed Red Yellow Blue for R, Y and B Phases for each breakers -05 sets
-
-
-
... More
(f) Automatic Star delta starter of capacity 10 HP for Jockey pump - 01 Nos
(g) Automatic Star delta starter of capacity 5 HP for Fresh water pump - 01 Nos
(h) Intelligent Panel meter to measure voltage, current, frequency, power factor, etc with all connected CTs of each breakers
(j) LED Indicating Lamps for each phase with colour coed Red Yellow Blue for R, Y and B Phases for each breakers -05 sets
-
-
-
... More
Supply, install, testing and commissioning of factory made APFC panel CPRI approved OEM, free standing floor mounted, dust and vermin proof Automatic Power Factor Correction [APFC] Panel of capacity of 250 KVAR with 6 steps (2x 25 + 4 x 50) Compartmentalised, indoor type, fabricated as per IEC 61921 with 2 mm thick CRCA Sheet and shall be given pre-treatment for degreasing, phosphatising etc. in seven tank process and shall be powder coated with RAL7035 coat with matt finish after due preparation of surfaces with minimum IP 43 Ingress Protection suitable for 3 Phase, 415 V & 50 Hz System with MD-XL Capacitor including suitable rated TPN, MCCB, 415 V, 35 KA rupturing capacity as incomer duly controlled by Auto and Manual option including instrumentation such as Power Factor Meter – 1 Nos, Digital type Ammeter of Range 0 to 250 Amps with CTs & Selector Switch – 1 Nos, Digital type Volt Meter of Range 0 – 500 V – 1 Nos, Relay, Auxiliary Contacts, CTS, Phase Indicating LED Lamps [RYB], Selector switches etc., suitable internal wiring with copper cable of suitable size, double stud hinged door, front openable with locking arrangement including interlocking with switch gears complete and panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm at Corners and ISMC of suitable size for base, embedded 600 mm below ground level in PCC 1:2:4, Type B–1 using 20mm grade stone aggregate, 600 mm above ground level including connecting up with existing incoming and outgoing cables etc. complete all as specified and as directed.
1
-
-
... More
Supply and fixing LED street light fitting 35/36 W 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protection complete all as specified and directed.
6
-
-
... More
Loop in loop out box of FRP made with IP 65 protection of thermoplasic circuit breaker boxes with metric knockouts for cable entry and exit, Combi climate Cable Glands of IP 66/ IP 67 for cable entry and Grommets IP 65 for conduit for cable exit with MCB 6 Amps, 10 kA, C Curve Overload and Short Circuit protection, terminals as bus terminals for cable with necessary fixing arrangemets and with cable glands, etc complete all as specified and directed.
6
-
-
... More
M & L for PVC insulated copper conductor of size 2.5 sqmm 3 core drawn through PVC conduit of suitable size with clamping materials complete all as specified and as directed.
60
-
-
... More
Supply and fix time switch 415 V, single phase of max 25 Amps rated, with contactor fitting inside steel enclosure complete all as specified and as directed.
1
-
-
... More
AIR CONDITIONING
-
-
-
... More
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built Cooling arrangement and Digital Inverter twin rotary of capacity 2 TR, BEE 5 star rated complete all as specified and directed.
6
-
-
... More
S & F 3.0 KVA Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.
15
-
-
... More
S & F 4.0 KVA Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.
6
-
-
... More
FIRE FIGHTING/ FIRE ALARM SYSTEM
-
-
-
... More
Supply and fix flanged end lift type Foot valve 80 mm dia with brass strainer, suitable flanges, nuts, bolts, gaskets complete all as specified and as directed.
2
-
-
... More
Supply and fix flanged end lift type Foot valve 150 mm dia with brass strainer, suitable flanges, nuts, bolts, gaskets complete all as specified and as directed.
3
-
-
... More
Supply and fix MS cabinet of size (approx 750mm x 600mm x 450mm) to enclose fire brigade inlet connections fabricated from 16 gauge sheet with full front glass door and locking arrangement painted with two coats of fire red over a coat of primer and mounted on suitable size masonry platform complete all as specified and as directed.
1
-
-
... More
Supply and fix LED EXIT light double sided with battery back up up to 2 Hrs. complete with all accessories as directed.
18
-
-
... More
Supply and install Fire Extinguisher CO2 Type light weight squeeze grip type confirming to IS:2878 of capacity 3 Kg including fixing to wall complete all as specified and directed. Note: Fire extsinguisher should equiped with hose of appropriate size and open-close should be with the help of wheel type valve.
8
-
-
... More
supply and install Fire Extinguisher Dry chemical powder ABC Type light weight squeeze grip type confirming to IS: 2171/13849/14609 of capacity 4.0 Kg including fixing to wall complete all as specified and directed. Note: Fire extsinguisher should equiped with hose of appropriate size and open-close should be with the help of wheel type valve.
8
-
-
... More
Supply and install Fire Extinguisher CO2 Type light weight squeeze grip type confirming to IS:15683 of capacity 4.5 Kg including fixing to wall complete all as specified and directed. Note: Fire extsinguisher should equiped with hose of appropriate size and open-close should be with the help of wheel type valve.
12
-
-
... More
Supply and install Fire Extinguisher Dry chemical powder ABC type light weight squeeze grip type confirming to IS: 15683 of capacity 6 kg including fixing to wallall complete as specified and directed. Note: (a) Fire extinguisher shall be duly fitted with high pressure flexible type of hose coupled with discharge nozzle. (b) Appropriate size of sign board should be hanged from wall/roof near the all fire points.
12
-
-
... More
Supply and install Fire Extinguisher Dry chemical powder ABC type light weight squeeze grip type confirming to IS: 15683 of capacity 9 kg including fixing to wall complete all as specified and directed. Note: (a) Fire extinguisher shall be duly fitted with high pressure flexible type of hose coupled with discharge nozzle. (b) Appropriate size of sign board should be hanged from wall/roof near the all fire points.
12
-
-
... More
Supply and install trolley mounted Fire Extinguisher Mechanical Foam Type light weight squeeze grip type confirming to IS: 13386 of capacity 50 litres including fixing to wall complete all as specified and directed. Note: (a) Fire extinguisher shall be duly fitted with high pressure flexible type of hose coupled with discharge nozzle. (b) Appropriate size of sign board should be hanged from wall/roof near the all fire points.
4
-
-
... More
Supply and install trolley mounted Fire Extinguisher Dry Chemical Powder Type type confirming to IS: 10658 of capacity 25 kg including fixing to wall complete all as specified and directed. Note: (a) Fire extinguisher shall be duly fitted with high pressure flexible type of hose coupled with discharge nozzle. (b) Appropriate size of sign board should be hanged from wall/roof near the all fire points.
4
-
-
... More
Supply and install MS heavy duty stand post type water foam moniter of size 63 mm dia with min 1750 LPM discharge at pressure of 7 kg/cm2 at nozzle end conforming to IS 8442 complete all as specified and directed.
8
-
-
... More
Supply and install aqueous film forming foam (AFFF) of capacity 20 litres with 3% concentration conforming to IS 4989 complete all as specified and directed.
225
-
-
... More
Supply and fix Control Console complete all as specified and directed.
1
-
-
... More
Supply and fix 2 core 1.5 sqmm FRLS armoured copper cable as per IS:1554 to wall/ roof/ false ceiling/ floors with necessary clamps/ saddles complete all as specified and directed.
1950
-
-
... More
EOT CRANE
-
-
-
... More
Supply, installation, erecting, commissioning, and testing of double girder electrically operated OH crane, indoor type, 5 ton capacity with varying span of 42-45 meter having lift 7 metre (approx.) and baylength 58 mtrs, AC 400/440 V, 3 phase, 50 Hz , Class-II Medium Duty M-5 as conforming to IS 807/3177 and IS : 3177-1999 with and including the following:
(A) Speeds: a) Hoist speed - 2.0 M/MIN b) Cross Travel - 7.0 M/MIN c) Long travel speed - 10.0 M/MIN (B) Wire Rope construction - a) 6 x 36 best plough steel fibre core R, H.D. lay per IS: 2266-1976 b) No of falls - 8 falls c) Factor of safety - greater than 6 (C) Bridge construction - Double web M.S. plate welded box type construction with adequate stiffeners and diaphram and fusion welded.
(D) End carriage and LT frame - fabricated out of M.S. section and plates with adequate diaphram
(E) End stoppers shall be provided on either side of the bridge to limit the motion of the trolley and on main LT rails, to limit and LT movement.
(F) Full length platform on the driving side shall be provided. These platform shall be covered fully with antiskid chequered plates and provided with hand rails.
1
-
-
... More
(G) DSL system shall be G.I. shrouded busbar system.
(H) C.T. Trolley shall be made of all welded construction fabricated from rolled steel, sections and plates, hoist and cross traverse machineries shall be mounted on this frame. Entire trolley shall be fully covered all round with safety hand rails.
(I) Rope Drum shall be fabricated out of low carbon steel as per IS: 2062 duly stress relieved of heavy duty seamless pipe construction to accommodate wire rope in single layer.
(J) Brakes :- a) Hoist Brake - 250 Dia thruster brake - qty -2 Nos b) Long travel brake- 150 Dia x 2 Nos thruster brakes c) Cross travel brake- 150 Dia thruster brakes
K) Hook - Forged heavy duty steel strandard single shank type plain hook as per IS 3815/3610. Materials shall be EN3 freely swiveling and supported on thrust bearing 360⁰ swivel hook shall also be provided with spring loaded safety latch
L) Wheel: Wheels should be double flanged fabricated out of forged steel of EN-9 mounted on double bearings.
M) Material of pinion : EN-9 hardness 250 to 300 BHN Material of gears : EN -8/9 hardness 250 BHN
All necessary testing of the crane including SWL, overload and deflection shall be done all as specified and as directed.
(Note : Gantry should be provided as per reccommendation of OEM)
-
-
-
... More
SOIL STABILIZATION AND RIGID PAVEMENT
-
-
-
... More
Crusher dust filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering and rolling complete all as specified and as directed.
2640
-
-
... More
Supply and fixing Non woven polypropylene Geotextile having minimum weight 285 gm per sqm (confirming to clause 702,Table 700-5 of MORTH 5th Rivision) complete all as specified and as directed.
3300
-
-
... More
Mobilisation of tools & equipment [k' Value-Test:] for finding socked 'K' value of subgrade by conducting cycle plate load test at required location for determining modulus of Sub Grade reaction (K value) test as per IS; 9214-1979 with all loading equipment and submission of report including site plan, Test location and result complete all as specified and as directed.
4
-
-
... More
Supply and fix high density polyethylene strip stabilised with minimum 1.5 to 2% of carbon black Geocell mattress having a minimum density of 0.90 gm/cc, minimum strip/cell wall thickness of 1.20 mm, cell depth of 150 mm, weld spacing 330 mm and the cell perforation area shall be between 11 to 16% of cell surface area, Confirming to clause 705. table 700-12 of MORTH 5th revision complete all as specified and as directed.
3300
-
-
... More
Preparation of concrete surfaces and applying two coats of chlorinated rubberized yellow paint over a coat of primer for continuous /interupted lines with road painting machine for dashes,arrows,letters etc in any colour manually or mechanically to achieve required finishes all as per manufactures instructions complete all as directed.
158
-
-
... More
TELEPHONE
-
-
-
... More
Supply and fix RJ 11 telephone socket 1 module with cover plate complete all as specified and as directed.
39
-
-
... More
Supply and fix factory fabricated GI metal flush boxes suitable for 1-2 module complete all as specified and as directed.
39
-
-
... More
COOLING APPLIANCES
-
-
-
... More
Supply and fix refrigerator,electric driven (single phase), capacity 165 litres, BEE 5 star rated complete all as specified and as directed.
2
-
-
... More
S & F 2.0 KVA Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.
8
-
-
... More
PILE FOPUNDATION
-
-
-
... More
Boring for bored cast in situ piles 500 mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil out side MD land using HYDRAULIC RIG complete all as specified and directed.
5338
-
-
... More
Boring for bored cast in situ piles 500mm dia in hard rock / fractured rock and getting out and disposal of spoil out side MD land using HYDRAULIC RIG complete all as specified and directed.
942
-
-
... More
Carrying out Initial load [Compression] test on 500mm dia piles, complete all as specified and directed.
4
-
-
... More
Carrying out Initial load [Lateral] test on 500mm dia piles, complete all as specified and directed.
4
-
-
... More
Carrying out routine load test [Compression] on 500mm dia piles, complete all as specified and directed.
7
-
-
... More
Carrying out routine load test [Lateral] on 500mm dia piles, complete all as specified and directed.
7
-
-
... More
Carrying out low strain integrity test on 500mm dia piles including analysing the results complete all as specified and directed.
314
-
-
... More
MS Pipe liner fabricated out of 6mm tk plain MS Plate confirming to Fe-410S by welding the joints lengthening wherever required, providing stiffener, lifting hooks including all as T&P as required, shifting the same from positions to positions required, driving in true vertical alignment in position to the required level for piles complete all as directed by Engineer-in-charge. Note : MS Pipe liner shall be casted as mentioned in drawing, however for payment purpose, the depth of pile liner shall be measured up to cut off level only irrespective of the depth provide for retaining concrete/Bentonite slurry. The unit rate/ lumsum price quoted shall be deemed to included for the same.
140071
-
-
... More
AVIATION LIGHT
-
-
-
... More
Aviation obstruction light LED type 10 Watt including standard fixing arrangements complete all as specified and as directed. Make: Bajaj( BGAV)/ Surya/C&S
4
-
-
... More
Supply and lay PVC Cable insulated armoured PVC sheathed LT 1100 V grade with copper conductor of size 3 core 2.5 sqmm multistranded conductor laid in ground fixed to wall roof etc., with suitable clamps, spacers, bolts, nuts complete all as specified and as directed
60
-
-
... More
Supply and fix time switches 250 V single Phase of 20 Amp rating with contactor fitted inside steel enclosure complete all as specified and directed.
1
-
-
... More
AIR CIRCULATORS
-
-
-
... More
Supply and install Air circulator fans dia 24 inch, 230 volts, 50 Hz, 1440 RPM, 15000 CMH, single phase oscillating 600 mm sweep having 3 Nos of blades, with aluminium front and back false cover, high torque cast iron gear box with safety clutch, max temp rise 52 degC, suitable for wall mounting with all necessary arrangement complete all as specified and as directed.
20
-
-
... More
Supply and fix turbo fan roof exhaust ventilator of size 24 inch made of aluminium metal, high corrosion resistant, maintanence free complete all as specified and directed.
12
-
-
... More
DG SET
-
-
-
... More
Supply and fixing of Silent engine generating set with accoustic enclosure as per CPCB norms 415 volts 625 KVA 3 phase 0.8 power factor 50 Hz, 1500 RPM self excited self regulated brushless AC generator including accoustic enclosure suitable for ambient condition and conforming to condition under IS 4722, BS 5514/ 2613 /5000 with and including the following:
(i) The capacity of Generator set shall be net after all due de-rating factors as per relevant ISI design
(ii) Rate quoted shall be deemed to be inclusive of cable and terminations form Generator to the AMF Panel, with necessary holes to wall including making good to disturbed surfaces so as to match with the existing finishes all as specified and directed.
(iii) The quoted rate shall be deemed to be inclusive of first fill of oil and final successful acceptance test
(A) Alternator :- Standard design alternator rated at 625 KVA net output at site after considering de-rating as per site conditions at 0.8 (lag) power factor AC, 3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self excited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of +/- 1% at rated voltage from no load to full load. The alternator shall be conforming to BS 2613/5000 and shall be imposition to generate supply with frequency regulation with in +/- 1% tolerance. The alternator will be suitable for tropical climate and shall generally conform to BS - 2613/5000/ IS – 4722
1
-
-
... More
i) Insualation class - 'H‘
ii) Temparature rise Class - 'H‘
iii) Excitation : Self Excited
iv) Regulation performance: The voltage is kept constant with +/- 1%, manual voltage adjustment within +/- 5%
v) Frequency regulation +/- 1%
(B) Diesel Engine: - Adequate capacity of Diesel engine as accosted by the accepting officer basing on manufacturers technical details water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for half an hour in 12 hours continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under
i)Fly wheel with housing
ii) Cooling system :- Moulded radiator with fan & belts
iii) Cooling Water pump : - Centrifugal type belt driven
iv) Exhaust System :- Exhaust System complete with exhaust piping of 150mm dia with MS pipe light grade upto & outside and 1meter away from the enclosure, covered with asbestos rope and aluminium foil of 28 SWG complete with in the enclosure for safe exhaust without transforming vibration to the wall of the enclosure.
Exhaust gas turbo charger type. Exhaust manifold
Silencer : Residual type Bellows
-
-
-
... More
iv) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by electronic governor for 1% speed /frequency regulation, Fuel filters, Fuel hoses.
v) Lub oil System : Lubricating oil filter Lubricating oil pump
vi) Air Intake System :
Air intake Manifold
Air cleaner dry type
vii) Governor :- Electronic Governor
viii) Starting System :- Electric Self starter with maintenance free battery including battery charging alternator
ix) Batteries :- Batteries of maintenance free of capacity as recommended by the manufacturer complete with copper conductor multi stranded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified and Starter gear ring Start and stop push button, Ignition key / Switch
Handling and operation : Salient features of accessories shall be as under: Radiator with blower fan
Corrosion inhibitor coolant
Paper element filters for fuel, lub oil and by pass
Electronic governor controlled direct fuel injection system
Fly wheel housing and fly wheel
-
-
-
... More
x) Generator Monitoring Panel : - Comprising of all standard items as mentioned under this schedule or asper standard practice iginiton key switch and start / stop arrangement, indications for Engine parametes, hour run meter, RPM meter, Engine oil pressure indicator, water/coolent temparature indicator, Battary volt display.
xi) Safety Controls : - Engine low lube oil pressure high water temparature and over speeding of engine
xii) Coupling arrangement : - Flexible coupling, fly wheel to suit flexible coupling
xiii) Accessories :- AVM Pads built in enclosure and for entire unit on platform.
xiv) Base Frame : - Should be provided as OEM norms
xvi) MS pipe line to and from the fuel tank to the DG Set C) AMF Panel :- Factory made inbuilt type control cubical type made out of 2mm thick CRCA sheet dust and vermin proof totally enclosed with front opening of 415 volts 3 -phase 4 - wire AC 50 Hz, including powder coated, copper bus bar of one and half times the rated load of 625 KVA alternator complete with internal wiring with PVC insulated single core copper conductor multi stranded wire of 1100 volts grade of suitable capacity, fuses, name plates consisting of 4 pole MCCBs and Contactors of capacity as recommended by the manufacturer. Detachable cable gland plates, all controls, indicators and standardstandard microprocessor based LED/LCD display for indicating voltage, current, frequency, speed, kW, kWH, pf, temperature, Battery voltage, etc
-
-
-
... More
g) Annuciation with indication lamps for : (i) Low lub oil pressure. (ii) High Water Temparature. (iii) Engine over speed. (iv) Battery low voltage
Controls :- a) Load on Indication b) Load off indication c) Engine start push button d) Engine stop push button e) Fault accept / reset push button
f)Battery charger
(i) Transformer shall be dry type, double wound, with copper conductor and
Class–B insulation with temperature rise limited to Class-A insulation.
(ii) Isolating switch shall be heavy duty, load break type, operated by an external
handle.
(iii). Fuses shall be HRC type and arranged for easy replacement. Semiconducting
devices fuses shall be fast-acting type.
(iv). Indicating meters (voltmeter and ammeter) shall be 96mm x 96mm, flush type
90 degree scale with antiglare glass, + 1% accuracy with zero adjuster on the
front of the meter.
-
-
-
... More
(v.) The following indications/alarm annunciation shall be provided:
a) Failure of input AC supply to the charger
b) Low battery voltage
c) DC output fuse blown
d) Charger fail
e) Over voltage
f) Earth fault
g) Battery on boost chargedirected.
(v) DC Ammeter (vi) Charger rate selector switch
D) Accoustic Enclosure:- Manufactured by OEM suitable for 625 KVA DG Set
(i) NAL approved as per CPCB
(ii) It Should be as per latest rules and regulations of Ministry of Environment and Pollution control board
(iii) The generating set battaries and control panel should be inside the enclosure.
(iv) Construction Details/specification are as follows:
a) Outer body :- CRCA Sheet of 1.6mm thick b) Doors :- CRCA sheet of 1.6 mm thick c) Sound Insulation :- As per OEM Norms
v) The accoustic should be composite in construction and fully assembled integral unit
vi) The batteries should be placed inside the enclosure beside the DG Set on a suitable insulated plat form
-
-
-
... More
vii) The DG Set should be provided with external Emergency stop push button
viii) The enclosure should be suitably illuminated by LED Lamp fittings.
ix) The noise level should be 75 dba at 1m under free field conditions.
x) The acoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Gen set Green. The base frame should be painted with epoxy based black shade
E) The coated rate includes excavation, removing of soft soil and PCC, Cement Concrete foundation, filling and mass concrete type B2 (1:2:4) using 40 mm graded aggregate of size not less than 4.6 x 3.0 x 0.8 m for placing of DG Set complete all as specified and directed.
-
-
-
... More
AIR COMPRESSOR
-
-
-
... More
Supply and fix air compressor of min. free air delivery 250 cfm at pressure 8 kg/cm2 , 415V, 50 Hz , noise level 74 dB with 2000 ltrs vetrical type air reciever,safety valve, pressure gauge, ball valve, drain valve, having two outlet points with two nos of 30 m length of hose pipe of size 25 mm and nozzles along with other accesories if required, complete all as specified and directed.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%