Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Furnitures and Fixtures
Eprocure
Opening Date5 Jan 2024
Closing Date3 Feb 2024
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_635973_1Bid Award Id
ViewTender No
C/8277/23-24/E8 / Token 105 of 2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
M & L for replacement of stainless steel handle of size 100mm long fixed with internal metal screws to various type furniture articles complete all as specified, shown on drawing and as directed.
70
-
-
M & L for repair to TABLE BEDSIDE STEEL (HF) by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 500mmx330mm made of 18mm thick plywood, BWR grade top side provided with 1mm thick plastic laminated sheet fixed with approved adhessive and duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-76(M))
55
-
-
M & L for repair to RACK STEEL 6 TIER by taking down/removing the existing broken /unserviceable Shelf carefully by removing the rivets and welding spot without disturbing the adjoining parts Supply and fixing of new shelf made of 1.25 mm thick MS sheet of size 915x305mm duly fixed to almirah large steel including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129/106) (Note: Finishing coat of paint shall be measured and paid seperately)
28
-
-
M & L for repair to RACK STEEL 6 TIER by taking down/removing the existing broken /unserviceable GI nuts & bolts carefully without disturbing the adjoining parts Supply and fixing of new GI nuts & bolts of same size and shape duly fixed to rackcomplete all as specified, shown on drawing and as directed. (Drg No. FD-129/106)
20
-
-
M & L for repair to RACK STEEL 6 TIER by taking down/removing the existing broken /unserviceable Angular frame carefully by cutting the welded ends with hand held machine and supply and fixing new Angular frame made out of Angle Iron 30x30x3mm thick of length 1905mm by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129/106) (Note: Finishing coat of paint shall be measured and paid seperately)
35
-
-
M & L for repair to RACK STEEL 6 TIER by taking down/removing the existing broken /unserviceable Side sheet carefully by cutting the welded ends with hand held machine and supply and fixing new Side sheet made out of 1mm thick Mild steel sheet of size 305x315mm fitted to angular frame by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129/106) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
M & L for repair to RACK STEEL 6 TIER by taking down/removing the existing broken /unserviceable Back sheet carefully by cutting the welded ends with hand held machine and supply and fixing new Back sheet made out of 1mm thick Mild steel sheet size 915x315mm fitted to angular frame by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-129/106) (Note: Finishing coat of paint shall be measured and paid seperately)
10
-
-
M & L for repair to STOOL STEEL (305X305X510MM)by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg 510mm height made of 1mm thick MS sheet made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-81) (Note: Finishing coat of paint shall be measured and paid seperately)
75
-
-
M & L for repair to STOOL STEEL (305X305X510MM)by taking down/removing the existing broken /unserviceable Top carefully by cutting the welded ends with hand held machine and supply and fixing new Top made of 1.25mm thick MS sheet made to shape and of size 305x315mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-81) (Note: Finishing coat of paint shall be measured and paid seperately)
45
-
-
M & L for repair to STEP STOOL 2 TIER by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made out of 25mm dia MS tube, 20 Gauge thick made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131(M)) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
S & F in replacement of Castor wheel 50mm dia with ball bearing duly fixed with rubber over the same as per the exisiting and fixed to exact place and position in various furniture articles complete all as specified, shown on drawing and as directed.
340
-
-
M & L for repair to STEP STOOL 2 TIER by taking down/removing the existing broken /unserviceable Top carefully by cutting the welded ends with hand held machine and supply and fixing new Top made of 1.25mm thick MS sheet made to shape and of size 230x230mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131(M)) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
M & L for repair to STOOL WITH CUSHION TOP by taking down/removing the existing broken /unserviceable Clip carefully by cutting the welded ends with hand held machine and supply and fixing new clip made of 1.6mm thick MS sheet made to L-shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-103(M)) (Note: Finishing coat of paint shall be measured and paid seperately)
150
-
-
M & L for repair to STOOL WITH CUSHION TOP by taking down/removing the existing broken /unserviceable Padded Seat carefully and supply and fixing new Padded seat with rexine cover in olive green colour as per the exisiting size and shape complete all as specified, shown on drawing and as directed. (Drg No. FD-103(M))
50
-
-
S & F in repair hard PVC shoe, 25mm dia of best quality as per the existing size and specifications, fixed to various type of steel furniture articles complete all as specified and directed.
600
-
-
M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of 300mm height, 25mm dia MS tube of 1.6mm thick made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-83) (Note: Finishing coat of paint shall be measured and paid seperately)
50
-
-
M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable hinge carefully by cutting the welded ends with hand held machine and supply and fixing new stainless steel Hinge, 100mm size fixed to the exact place and position complete all as specified, shown on drawing and as directed. (Drg No. FD-83)
100
-
-
M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Hook and Spring carefully and supply and fixing new Hook and Spring, PVC coated, 1150mm long all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83)
120
-
-
M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Hook and Spring carefully and supply and fixing new Hook and Spring, PVC coated, 550mm long all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83)
180
-
-
M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Cotton fabric curtain carefully and supply and fixing new Cotton fabric curtain of size 1160x1200mm duly stitch of green colour of Rate not less than Rs. 200.00 per metre all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83)
120
-
-
M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Cotton fabric curtain carefully and supply and fixing new Cotton fabric curtain of size 550x1200mm duly stitch of green colour of Rate not less than Rs. 200.00 per metre all as per the exisiting specification and fixed complete all as specified, shown on drawing and as directed. (Drg No. FD-83)
150
-
-
M & L for repair to TABLE BED SIDE SS TOP by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg 150mm height, made out of 25x25mm square tube of 1.6mm thick made toshape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej) (Note: Finishing coat of paint shall be measured and paid seperately)
65
-
-
M & L for replacement of heavy duty brass ball catcher as per the existing size and specifications fixed to varios type furniture articles complete all as specified, shown on drawing and as directed.
170
-
-
M & L for repair to TABLE BED SIDE SS TOP by Refixing existing damaged shutters by replacing with new screws as per the existing specifications including minor denting/bending etc complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej)
60
-
-
M & L for repair to TABLE BED SIDE SS TOP by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top made of Polypropylene Copolymer (PPCP) of size 325x450mm and as per the existing thick and fixed properly as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. TP-Godrej)
350
-
-
M & L for repair to TABLE INVALID STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg 150mm height, made out of 25mm MS tube of 1.6mm thick made toshape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131) (Note: Finishing coat of paint shall be measured and paid seperately)
30
-
-
M & L for repair to TABLE INVALID STEEL by taking down/removing the existing broken /unserviceable Stiffner carefully by cutting the welded ends with hand held machine and supply and fixing new Stiffner 150mm long, made out of 25mm MS tube of 1.6mm thick made toshape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
M & L for repair to TABLE INVALID STEEL by taking down/removing the existing broken /unserviceable Top carefully by cutting the welded ends with hand held machine and supply and fixing new Top made out of 1.5mm thick MSA sheet made to shapeof size 460x415mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-131) (Note: Finishing coat of paint shall be measured and paid seperately)
12
-
-
M & L for repair to RACK ADJUSTABLE 3 TIER by taking down/removing the existing broken /unserviceable Angular frame carefully by cutting the welded ends with hand held machine and supply and fixing new Angular frame made out of Angle Iron 30x30x3mm thick of length 900mm by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-106) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
M & L for repair to RACK STEEL 3 TIER by taking down/removing the existing broken /unserviceable Shelf carefully by removing the rivets and welding spot without disturbing the adjoining parts Supply and fixing of new shelf made of 1.00mm thick MS sheet of size 915x300mm duly fixed to almirah large steel including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-106) (Note: Finishing coat of paint shall be measured and paid seperately)
16
-
-
M & L for repair to RACK STEEL 3 TIER by taking down/removing the existing broken /unserviceable Side sheet carefully by cutting the welded ends with hand held machine and supply and fixing new Side sheet made out of 1mm thick Mild steel sheet of size 305x325mm fitted to angular frame by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-106) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
M & L for repair to RACK STEEL 3 TIER by taking down/removing the existing broken /unserviceable Back sheet carefully by cutting the welded ends with hand held machine and supply and fixing new Back sheet made out of 1mm thick Mild steel sheet of size 905x325mm fitted to angular frame by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-106) (Note: Finishing coat of paint shall be measured and paid seperately)
10
-
-
M & L for repair brass chromium plated Handle, 100mm size fixed to various type of furniture articles all as shown on drawings complete all as specified, shown on drawing and as directed.
85
-
-
M & L for repair to ALMIRAH STEEL LARGE/MEDIUM (HF) by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining parts Supply and fixing of new 6 lever lock, brass with duplicate keys complete all as specified, shown on drawing and as directed. (Drg No. FD-67)
110
-
-
M & L for repair to ALMIRAH STEEL LARGE/MEDIUM (HF) by taking down/removing the existing broken /unserviceable leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new leg made of 1mm thick MS sheet made to U shape and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-67) (Note: Finishing coat of paint shall be measured and paid seperately)
75
-
-
M & L for repair to ALMIRAH STEEL LARGE/MEDIUM (HF) by taking down/removing the existing broken /unserviceable Shelf from almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Shelf made of 1mm thick MS sheet of size 900x425mm and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-67) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
M & L for repair to ALMIRAH STEEL LARGE/MEDIUM (HF) by taking down/removing the existing broken /unserviceable Shelf from almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new Shelf made of 1mm thick MS sheet of size 705x305mm and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-67) (Note: Finishing coat of paint shall be measured and paid seperately)
20
-
-
M & L for repair to TABLE OFFICE CLERK/TYPIST/OFFICER STEEL by taking down/removing the existing broken /unserviceable Lock carefully without disturbing the adjoining parts Supply and fixing of new 4 lever lock, brass with duplicate keys complete all as specified, shown on drawing and as directed. (Drg No. FD-84)
25
-
-
M & L for repair to TABLE OFFICE CLERK/TYPIST/OFFICER STEEL by taking down/removing the existing broken /unserviceable leg from bottom carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and fixing new leg made of 25mm Square MS tube, 150mm long and fixed to the existing place through welding and riveting the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-84) (Note: Finishing coat of paint shall be measured and paid seperately)
35
-
-
M & L for repair to TABLE OFFICE CLERK STEEL by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-84)
40
-
-
M & L for repair to TABLE OFFICE TYPIST STEEL by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 900mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-84)
5
-
-
M & L for repair to TABLE OFFICE OFFICER STEEL by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-84)
28
-
-
M & L for repair to ALMIRAH MESS UTENSIL by taking down/removing the existing broken /unserviceable Shutter carefully and supply and fixing new Shutter of size 695x515mm made out of 18mm thick BWR plywood laminted with 0.9mm thick decorative laminated sheet both sides duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-93)
10
-
-
M & L for repair to ALMIRAH MESS UTENSIL by taking down/removing the existing broken /unserviceable Shelf carefully and supply and fixing new Shelf of size 1030x425mm made out of 18mm thick BWR plywood laminted with 0.9mm thick decorative laminated sheet both sides duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-93)
10
-
-
M & L for repair to ALMIRAH MESS UTENSIL by taking down/removing the existing broken /unserviceable Top/Bottom carefully and supply and fixing new Top/Bottom of size 1065x455mm made out of 18mm thick BWR plywood laminted with 0.9mm thick decorative laminated sheet both sides duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-93)
12
-
-
M & L for repair to ALMIRAH MESS UTENSIL by taking down/removing the existing broken /unserviceable Back Cover carefully and supply and fixing new Back Cover of size 1570x1065mm made out of 8mm thick BWR plywood fixed with headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-93)
10
-
-
M & L for replacement of Aluminium anodised handle of size 100mm long fixed with internal metal screws to various type furniture articles complete all as specified, shown on drawing and as directed.
133
-
-
M & L for replacement of 100 mm size hasp & staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate fixed to various type furniture articles complete all as specified, shown on drawing and as directed.
36
-
-
M & L for repair to LOCKER BEDSIDE WOODEN by taking down/removing the existing broken /unserviceable Shutter carefully and supply and fixing new Shutter of size (1025x380) mm made out of 18mm thick BWR plywood, one side teak finished duly providing with 4mm thick teak wood edging all around, fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-222)
15
-
-
M & L for repair to LOCKER BEDSIDE WOODEN by taking down/removing the existing broken /unserviceable Side Cover carefully and supply and fixing new Side Cover of size (1025x600) mm made out of 18mm thick BWR plywood, one side teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-222)
12
-
-
M & L for repair to LOCKER BEDSIDE WOODEN by taking down/removing the existing broken /unserviceable Top/Bottom carefully and supply and fixing new Top/Bottom of size (760x600) mm made out of 18mm thick BWR plywood, one side teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-222)
10
-
-
M & L for repair to LOCKER BEDSIDE WOODEN by taking down/removing the existing broken /unserviceable Vertical Partition (1025x600) mm carefully and supply and fixing new Vertical Partition of size as per the existing one made out of 12mm thick BWR plywood fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-222)
15
-
-
M & L for repair to LOCKER BEDSIDE WOODEN by taking down/removing the existing broken /unserviceable Shelf (450x600) mm carefully and supply and fixing new Vertical Shelf of size as per the existing one made out of 12mm thick BWR plywood fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-222)
18
-
-
S & F in replacement Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open fixed to various type furniture articles complete all as specified and directed.
10
-
-
M & L for repair to LOCKER BEDSIDE WOODEN by taking down the existing broken /unserviceable Legs and supply and fixing of new Legs of of size (40x40mm at Bottom, 50x50 mm at Top and 75 mm high) made of 1st class teak wood member duly fixed by using metal screws complete all as specified, shown on drawing and as directed. (Drg No. FD-222)
18
-
-
M & L for repair to TABLE 900x900x760mm by taking down the existing broken /unserviceable Leg and supply and fixing of new Legs made to shape of size 50mmx50mm at top and 40x40mm at bottom of 760mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-88/94)
25
-
-
M & L for repair to TABLE 900x900x760mm by taking down the existing broken /unserviceable Top Rail and supply and fixing of new Top Rail of size 900x25x25mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-88/94)
18
-
-
M & L for repair to TABLE 900x900x760mm by taking down the existing broken /unserviceable Top and supply and fixing of new Top of size 900mmx900mm made out of 18mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified, shown on drawing and as directed. (Drg No. FD-88)
20
-
-
M & L for repair to TABLE 900x900x760mm by taking down the existing broken /unserviceable Top and supply and fixing of new Top of size 900mmx900mm made out of 30mm thick Marble (table rubbed and polished), Makrana White complete all as specified, shown on drawing and as directed. (Drg No. FD-94)
20
-
-
S & F in replacement ball spring catcher for shutter as per existing size complete all as specified.
60
-
-
S & F in replacement 25mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed to various type of furniture article complete all as specified and directed.
30
-
-
S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed to various type of furniture articles complete all as specified and directed.
7
-
-
M & L for repair to MEAT SAFE & MILK by taking down the existing broken /unserviceable Back and supply and fixing of new Back of size 900x840mm made out of 18mm thick prelaminated particle board exterior grade, natural teak color, edges complete all as specified, shown on drawing and as directed. (Drg No. FD-47)
10
-
-
M & L for repair to MEAT SAFE & MILK by taking down the existing broken /unserviceable Top and supply and fixing of new Top of size 900x540mm made out of 25mm thick Marble (table rubbed and polished), Makrana White complete all as specified, shown on drawing and as directed. (Drg No. FD-47)
12
-
-
M & L for repair to TABLE 1520x860x760mm by taking down the existing broken /unserviceable Leg and supply and fixing of new Legs made to shape of size 50mmx50mm at top and 40x40mm at bottom of 760mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-139)
20
-
-
M & L for repair to TABLE 1520x860x760mm by taking down the existing broken /unserviceable Top Vertical Rail and supply and fixing of new Top Vertical Rail of size 760x25x100mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-139)
16
-
-
M & L for repair to TABLE 1520x860x760mm by taking down the existing broken /unserviceable Top Horizontal Rail and supply and fixing of new Top Horizontal Rail of size 1420x25x100mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-139)
12
-
-
M & L for repair to TABLE 1520x860x760mm by taking down the existing broken /unserviceable Top and supply and fixing of new Top of size 1520x860mm made out of 18mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified, shown on drawing and as directed. (Drg No. FD-139)
18
-
-
M & L for repair to TABLE 1520x860x760mm by taking down the existing broken /unserviceable Centre Stiffner and supply and fixing of new Centre Stiffner of size 25x50x760mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-139)
16
-
-
S & F in replacement 50mm Butt hinges, stainless steel and fixed to various type of furniture article as shown on drawings complete all as specified and directed.
50
-
-
S & F in replacement 25mm dia brass, chromium plated knob and fixed to various type of furniture article as shown on drawings complete all as specified and directed.
50
-
-
M & L for repair to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Top and supply and fixing of new Top of size 600x380mm made out of 18mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as specified, shown on drawing and as directed. (Drg No. FD-157)
35
-
-
M & L for repair to TABLE BED SIDE STEEL by taking down the existing broken /unserviceable Top and supply and fixing of new Top of size 550x330mm made of 12mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nailscomplete all as specified, shown on drawing and as directed. (Drg No. FD-133(M))
25
-
-
M & L for repair to TABLE BED SIDE STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MSSquare pipe of size 25mm of wall thickness 1.6mm made to shape 150mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-133(M)) (Note: Finishing coat of paint shall be measured and paid seperately)
40
-
-
M & L for repair to TABLE BED SIDE STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MSSquare pipe of size 25mm of wall thickness 1.6mm made to shape 130mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-157) (Note: Finishing coat of paint shall be measured and paid seperately)
30
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Long Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Long Rail made of MS tube 25mm dia of wall thickness 1.6mm, 1800mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) (Note: Finishing coat of paint shall be measured and paid seperately)
5
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Short Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Long Rail made of MS tube 25mm dia of wall thickness 1.6mm, 900mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) (Note: Finishing coat of paint shall be measured and paid seperately)
6
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square tube of size 25mm of wall thickness 1.6mm, 700mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135) (Note: Finishing coat of paint shall be measured and paid seperately)
8
-
-
M & L for repair to various type steel furniture articles by running welding at damaged joints of legs/stiffner etc n.exc 6mm thick of metal to be welded complete all as shown on drawing, as specified and directed.
158
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Base of drawer carefully and supply and fixing new Base of drawer ply of size 600x380mm of BWR 6mm thick plywood fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-122)
6
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Back of drawer carefully and supply and fixing new Back of drawer of size 91x380mm made out of 12mm thick BWR plywood, both sides teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122)
5
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Sides of drawer carefully and supply and fixing new Sides of drawer of size 91x600mm made out of 12mm thick BWR plywood, both sides teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122)
6
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Shelf carefully and supply and fixing new Shelf of size 400x300mm made out of 12mm thick BWR plywood, both sides teak finished fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122)
8
-
-
M & L for repair to Drawers of COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by rejointing the existing disjointed portion of drawers with approved adhessive/screws/nails all as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. FD-122)
12
-
-
S & F in replacement Stainless steel spring, copper coated, 100mm dia, 100mm high duly fixed with cane stick 9mm dia as per the existing specifications and fixed to various type of furniture article as shown on drawings complete all as specified and directed.
30
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable complete fadded upholestery carefully and supply and fixing new complete leatherite upholestery of approved colour/shade of 1500mm wide cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135)
10
-
-
M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable complete worn out foam alongwith cotton layer and hassian cloth carefully and supply and fixing new complete foam, 25mm thck 32 density alongwith cotton layer and hassian cloth fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-122/135)
6
-
-
S & F in repair hard Rubber shoe of best quality as per the existing size and specifications, fixed to various type of steel furniture articles complete all as specified and directed.
395
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape 510mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) (Note: Finishing coat of paint shall be measured and paid seperately)
18
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable Base Rail carefully by cutting the welded ends with hand held machine and supply and fixing new Base Rail made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape 700mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M)) (Note: Finishing coat of paint shall be measured and paid seperately)
20
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down the existing broken /unserviceable Hand Rest and supply and fixing of new Hand Rest of size 19x65x700mm made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
30
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable complete worn out Foam Seat alongwith leatherite cover carefully and supply and fixing new complete Foam Seat, 50mm thck 32 density of size 560x635mm alongwith Leatherite cover of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
45
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable complete worn out Foam Back Rest alongwith leatherite cover carefully and supply and fixing new complete Foam Back Rest, 25mm thck 32 density of size 560x355mm alongwith Leatherite cover of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
45
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable complete worn out fadded Leatherite Upholestery from Seat carefully and supply and fixing new complete Leatherite Upholestery from Seat of size 560x635mm of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
12
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable complete worn out fadded Leatherite Upholestery from Back Rest carefully and supply and fixing new complete Leatherite Upholestery from Back Rest of size 560x355mm of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
10
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by rejointing the existing disjointed Flat iron cleats in between hand rest and MS square pipe by replacing the damaged steel scerws with new one and fixed properly all as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
15
-
-
M & L for repair to CHAIR EASY (CUSHIONED) STEEL by rejointing the existing disjointed Metal Clamp at back side of seat rest by replacing the damaged steel scerws with new one and fixed properly all as shown on drawings complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
12
-
-
M& L for Repairs to CHAIR DINING OFFICER by taking down the existing broken /unserviceable Rear Leg and replacing the same with new Rear Leg made out of size 950mmx45mmx45mm, at bottom section of 45x30mm and at middle 45x45mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed. (Drg No. TP/ SK-15)
25
-
-
M& L for Repairs to CHAIR DINING OFFICER by taking down the existing broken /unserviceable front Leg and replacing the same with new front Leg made out of size 410 mmx45mmx45mm, at bottom section of 45x30mm and at middle 45x40 mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed. (Drg No. TP/ SK-15)
18
-
-
M & L for Repairs to CHAIR DINING OFFICER by taking down the existing broken /unserviceable side Stiffener and replacing the same with new side Stiffener made out of size 350mmx25mmx20mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed. (Drg No. TP/ SK-15)
20
-
-
M & L for Repairs to CHAIR DINING OFFICER by taking down the existing broken /unserviceable centre Stiffener and replacing the same with new centre Stiffener made out of size 280mmx25mmx20mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed. (Drg No. TP/ SK-15)
18
-
-
M & L for Repairs to CHAIR DINING OFFICER by taking down the existing broken /unserviceable Back Rest Mid Frame and replacing the same with new Back Rest Mid Frame made out of size 480 mmx25mmx10mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed.. (Drg No. TP/ SK-15)
20
-
-
M & L for Repairs to CHAIR DINING OFFICER by taking down the existing broken /unserviceable Back Rest and replacing the same with new Back Rest made out of size 350mmx25mmx75mm made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing, complete all as specified and directed.. (Drg No. TP/SK-15)
20
-
-
M & L for Repairs to CHAIR DINING OFFICER by taking down the existing damaged /unserviceable Seat Cushion and replacing the same in position with new Seat Cushion made to shape of size 395x395mm with 50mm thick 32 density PU foam duly covered with best quality leatherilite cloth of rate not less than as decided by GE complete all as shown on drawing, complete all as specified and directed. (Drg No. TP/ SK-15)
250
-
-
M & L for repair to SOFA SET 4 SEATER (3+1) by removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:-
(i) Cool foam of density 40 of approved make in seat, back and sides (ii) SS spring 100 mm dia Copper coated of 100 mm high to be replaced with U/S one duly fixed with cane stick 9 mm dia (iii) Hessain cloth for the base and side at the egdes & base (iv) Markin cloth as initial cover over cool foam
(v) Replacement of tapestry cloths for Base and Back rest of superior quality of approved shade/colour by the user of 4' wide, costing not less than Rs. 600.00 Per RM, duly stiched by the upholster as directed by the Engr-in-charge (Drg No : FD-272)
10
-
-
M & L for repair to SOFA 3 SEATER (2+1) by removing the following unserviceable components carefully without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed:-
(i) Cool foam of density 40 of approved make in seat, back and sides (ii) SS spring 100 mm dia Copper coated of 100 mm high to be replaced with U/S one duly fixed with cane stick 9 mm dia (iii) Hessain cloth for the base and side at the egdes & base (iv) Markin cloth as initial cover over cool foam
(v) Replacement of tapestry cloths for Base and Back rest of superior quality of approved shade/colour by the user of 4' wide, costing not less than Rs. 600.00 Per RM, duly stiched by the upholster as directed by the Engr-in-charge (Drg No : FD-258)
15
-
-
M & L for repair to DESK SCHOOL CHILD TYPE 'A' by taking down/removing the existing broken /unserviceable Shelf Top carefully and supply and fixing new Shelf Top of size 900x800mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. FD-124)
15
-
-
M & L for repair to DESK SCHOOL CHILD TYPE 'A' by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg made of MS Square pipe of size 25mm of wall thickness 1.6mm made to shape 560mm high by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-124) (Note: Finishing coat of paint shall be measured and paid seperately)
18
-
-
M & L for repair to DESK SCHOOL CHILD TYPE 'A' by tightening the lossen Flat Iron strip of size 25x3mm on shorter side by replacing the screws etc as shown of drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-124)
12
-
-
M & L for repair to DESK SCHOOL CHILD TYPE 'A' by Re-fixing of worn out existing wooden plank at back side and bottom side by replacing the screws etc as shown of drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-124)
10
-
-
M & L for repair to DESK FOR SCHOOL by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1200x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) )
25
-
-
M & L for repair to BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable seat carefully and supply and fixing new seat of size 1200x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) )
35
-
-
M & L for repair to DESK/ BENCH FOR SCHOOL by replacement of existing faded lamination carefully and supply and fixing new lamination of 1 mm thick, size 1200x450mm, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) )
50
-
-
M & L for repair to DESK/ BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable Legs carefully by cutting the welded ends with hand held machine and supply and fixing new Legs made of MS pipe of size 25mm dia of wall thickness 1.6mm made to shape 600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/263& 263 (R) ) (Note: Finishing coat of paint shall be measured and paid seperately)
25
-
-
M & L for repair to DESK FOR SCHOOL by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1500x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) )
35
-
-
M & L for repair to BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable seat carefully and supply and fixing new seat of size 1500x450mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) )
40
-
-
M & L for repair to DESK/ BENCH FOR SCHOOL by replacement of existing faded lamination carefully and supply and fixing new lamination of 1 mm thick, size 1500x450mm, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) )
60
-
-
M & L for repair to DESK/ BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable Legs carefully by cutting the welded ends with hand held machine and supply and fixing new Legs made of MS pipe of size 25mm dia of wall thickness 1.6mm made to shape 650mm long by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. CWE/SK/258(R) & 263 (R) ) (Note: Finishing coat of paint shall be measured and paid seperately)
21
-
-
M & L for repair to DESK WOODEN FOR KG by taking down/removing the existing broken /unserviceable Top carefully and supply and fixing new Top of size 1210 x 450mm made of 12mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails complete all as specified, shown on drawing and as directed. (Drg No.CWE(P)/V/SK01 (DHC) )
75
-
-
M & L for repair to DESK WOODEN FOR KG by taking down the existing broken /unserviceable Leg and supply and fixing of new Legs made to shape of size 50mmx50mm and 450mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK01 (DHC))
25
-
-
M & L for repair to TABLE DESK WOODEN FOR KG by taking down the existing broken /unserviceable Long rail and supply and fixing of new long Rail of size 50mmx25mm, 1110 mm long made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No.CWE(P)/V/SK01 (DHC))
65
-
-
M & L for repair to TABLE DESK WOODEN FOR KG by taking down the existing broken /unserviceable Short rail and supply and fixing of new Short Rail of size 25mmx25mm, 350 mm long made out of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No.CWE(P)/V/SK-01 (DHC))
55
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable front Leg and supply and fixing of new front Legs made to shape of size 40mmx40mm and 295 mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
15
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable rear Leg and supply and fixing of new rear Legs made to shape of size 40mmx40mm and 600 mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
14
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable short stiffener and supply and fixing of new short stiffener made to shape of size 50mmx25 mm and 275 mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
25
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable long stiffener and supply and fixing of new long stiffener made to shape of size 50mmx25 mm and 305 mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
23
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable seat base and supply and fixing of new seat base made to shape of size 305mmx275 mm of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
75
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable top rest and supply and fixing of new top rest made to shape of size 25 mmx 50 mm and 280mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
28
-
-
M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable middle rest and supply and fixing of new middle rest made to shape of size 25 mmx 35 mm and 280mm long of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. CWE(P)/V/SK-02 (DHC))
24
-
-
M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable desk Top with plank carefully and supply and fixing new desk Top of size 910x350mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-01)
25
-
-
M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 275 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-01)
21
-
-
M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable desk Top with plank carefully and supply and fixing new desk Top of size 910x 420mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-02)
28
-
-
M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 320 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-02)
26
-
-
M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 430 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-01)
25
-
-
M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable bench Top with plank carefully and supply and fixing new bench Top of size 910x 330 mm made of 18mm thick prelaminated Particle board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails with provision of 1 st class teak wood plank complete all as specified, shown on drawing and as directed. (Drg No. SKT-02)
24
-
-
M & L for repair to LOCKER 3/4/6 UNIT by taking down/removing the existing broken /unserviceable Leg carefully by cutting the welded ends with hand held machine and supply and fixing new Leg of size 420x100x100mm made out of 1mm thick Mild steel sheet by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-127) (Note: Finishing coat of paint shall be measured and paid seperately)
15
-
-
M & L for replacement of brass chromium plated handle of size 50mm long fixed with internal metal screws to varios type furniture articles complete all as specified, shown on drawing and as directed.
25
-
-
M & L for repair to LOCKER 3/4/6 UNIT by taking down/removing the existing broken /unserviceable Shutter carefully by cutting the welded ends with hand held machine and supply and fixing new Shutter as per the existing size and shape made out of 1mm thick Mild steel sheet by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-127) (Note: Finishing coat of paint shall be measured and paid seperately)
10
-
-
M & L for repair to LOCKER 3/4/6 UNIT by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining parts Supply and fixing of new 4 lever lock, brass with duplicate keys complete all as specified, shown on drawing and as directed. (Drg No. FD-127)
12
-
-
M & L for repair to LOCKER 3/4/6 UNIT by taking down/removing the existing broken /unserviceable Hanging rod carefully without disturbing the adjoining parts Supply and fixing of new Hanging rod of brass chromium plated, 25mm dia, 1.6mm wall thickness, as per the existing length as shown on drawing duly fixed in exisiting support complete all as specified, shown on drawing and as directed. (Drg No. FD-127)
15
-
-
M & L for repair to SOFA 1/4/5 SEATER by Removing the old unserviceable torn / worns out Cushion cover carefully and supply and fixing new Cushion cover (21"x22"x4") of approved colour and shade not less than Rs. 400.00 per mtr duly stiched with Zip of best quality all as shown on drawing and as directed. (Note: Cushion cover/Tapestry cloth:- It shall be heavy linen look fabric, plain velvet fabric or as per approved sample placed in BSO yard . (Drg No. FD-373)
655
-
-
M & L for repair to SOFA 1/4/5 SEATER by Removing the old unserviceable torn / worns out Foam Cool carefully and supply and fixing new Foam Cool of size 530x560x100mm thick of density 40 of approved make all as shown on drawing and as directed. (Drg No. FD-373)
355
-
-
M & L for repair to CHAIR VERANDAH by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia coduit of 1.6mm thick, 120 mm length fixed by proper gas welding and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer complete all as specified, shown on drawing and as directed. (Drg No. FD-19/256) (Note: Finishing coat of paint shall be measured and paid seperately)
140
-
-
M & L for repair to CHAIR VERANDAH by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-19/256)
(Note: The caning of chairs shall be carried only after finishing with painting all as required at site.)
950
-
-
M & L for Repairs to HARD BED [KD type] by taking down the existing broken /unserviceable top and replaced with new top of 12mm thick plywood BWR grade-AA of size 1980mmx900mm with 12 x Nos of 40mm long countersunk wood screw.complete all as specified and as directed. (Drg No. FD-264)
100
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing broken /unserviceable legs and supply and fixing of new legs made to shape of size 40 mm dia at top,25 mm dia at bottom and 75 mm high of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
50
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing side stiffener and supply and fixing of new side stiffeners of size 40x19 mm of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
40
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing vertical members and supply and fixing of new vertical members of size 45x45 mm of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
50
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing vertical members and supply and fixing of new vertical members of size 45x45 mm of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
50
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing top rail and supply and fixing of new top rail of size 45x19 mm of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
45
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing bottom rail and supply and fixing of new bottom rail of size 57x19 mm of 1st class teak wood as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
35
-
-
M & L for repair to Bin soiled lenin (Cane) by taking down the existing plywood from front/back/top and supply and fixing of new 6 mm thick BWR plywood, both sides teak finished as per drg complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
125
-
-
M & L for repair to Bin soiled lenin (Cane) by removing u/s worn out cane from sides and recanning the with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
195
-
-
M & L for repair to Bin soiled lenin (Cane) by removing u/s worn out TW edging and supply and fixing of new edging of size 6x25 mm of 1st class teak wood complete all as specified, shown on drawing and as directed. (Drg No. FD-15)
150
-
-
M & L for repair to CHAIR EASY (CUSHIONED) by taking down/removing the existing unserviceable complete worn out Foam Seat alongwith leatherite cover carefully and supply and fixing new complete Foam Seat, 75mm thck 32 density of size 560x625mm alongwith Leatherite cover of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
275
-
-
M & L for repair to CHAIR EASY (CUSHIONED) by taking down/removing the existing unserviceable complete worn out back Foam alongwith leatherite cover carefully and supply and fixing new complete back Foam , 50mm thck 28 density of size 560x355mm alongwith Leatherite cover of approved shade of cost not less than Rs. 500.00 per RM fixed as shown on drawing complete all as specified, shown on drawing and as directed. (Drg No. FD-121 (M))
275
-
-
M & L for preparation of old painted steel surface of Table bedside steel ( Drg No :FD-76 /133(m) /157) by scraping out the old paint by applying paint remover solution, with emary paper, filling metal putty to the uneven surfaces and sanding it again to make the surface smooth and then wipe out the surface and remove the all dust etc with a fine cloth and applying spray painting with two coats of hammer tone paint of approved quality as per existing shade externally and internally after applying and drying one coat of metal primer complete all as specified and as shown on drawing. (Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user's requirement)
150
-
-
All as per Serial item No. 160 above but for Couch examination - massage (steel) / Table cushioned complete ditto (Drg No. FD-122 / FD-135)
25
-
-
All as per Serial item No. 160 above but for Rack towel tubular steel 380 w x 915 H mm complete ditto (Drg No. FD-81)
25
-
-
All as per Serial item No. 160 above but for Rack stationery steel 380 L X 230 W X 330 H mm complete ditto (Drg No. FD-81)
5
-
-
All as per Serial item No. 160 above but for Stool steel 305 L X 305 W X 510 H mm complete ditto (Drg No. FD-81)
50
-
-
All as per Serial item No. 160 above but for Stool steel 305 L X 305 W X 760 H mm complete ditto (Drg No. FD-81)
35
-
-
All as per Serial item No. 160 above but for Screen moveable three-fold (1650 h x 2400 w) complete ditto (Drg No. FD-83)
25
-
-
All as per Serial item No. 160 above but for Table invalid tubular frame of size 1070 x 460 x 415 mm complete ditto (Drg No. FD-131)
25
-
-
All as per Serial item No. 160 above but for Step steel 1 tier (size 460x 460 x 150 mm) complete ditto (Drg No. FD-131)
10
-
-
All as per Serial item No. 160 above but for Step steel 2 tier (size 460x 460 x 300 mm) complete ditto (Drg No. FD-131)
25
-
-
All as per Serial item No. 160 above but for Step steel 3 tier (size 460x 460 x 450 mm) complete ditto (Drg No. FD-131)
15
-
-
All as per Serial item No. 160 above but for Stool revolving adjustable with cushion top 380 mm dia complete ditto (Drg No. FD-103)
30
-
-
All as per Serial item No. 160 above but for Stool adjustable with SS top 330 mm dia complete ditto (Drg No. FD-119)
25
-
-
All as per Serial item No. 160 above but for Locker steel 3 unit ( size 1050 H X 920 L X 485 w mm) complete ditto (Drg No. FD-127)
15
-
-
All as per Serial item No. 160 above but for Locker steel 4 unit ( size 1010 H x 930 l X 430 w mm) complete ditto (Drg No. FD-127)
16
-
-
All as per Serial item No. 160 above but for Locker steel 6 unit (size 1455 h x 930 l x 430 w mm) complete ditto (Drg No. FD-127)
18
-
-
All as per Serial item No. 160 above but for Back/Head rest Steel (760 L X 480 W X 610 H) complete ditto (Drg No. FD-119)
10
-
-
All as per Serial item No. 160 above but for Rack pigeon hole steel (size 1905 h x 915 l x 305/610 w mm) complete ditto (Drg No. FD-106)
8
-
-
All as per Serial item No. 160 above but for Table tubular SS top (size 1220 l x 610 w x 760 w mm ) complete ditto (Drg No. FD-119)
5
-
-
All as per Serial item No. 160 above but for Table tubular SS top (size 1670 l x 760 w x 750 h mm) complete ditto (Drg No. FD-90)
6
-
-
All as per Serial item No. 160 above but for Table tubular SS top (size 920 L x 920 w x 760 h mm) complete ditto (Drg No. FD-142)
10
-
-
All as per Serial item No. 160 above but for Table tubular SS top (size 2100 L x 900 w x 760 h mm) complete ditto (Drg No. FD-144)
4
-
-
All as per Serial item No. 160 above but for Locker Bedside steel (internal & external) complete ditto (Drg No. FD-257)
145
-
-
All as per Serial item No. 160 above but for Table folding tubular steel (size 600 x 600 x 760 mm) complete ditto (Drg No. FD-142)
5
-
-
All as per Serial item No. 160 above but for Almirah large steel with shelves (Adjustable) complete ditto (Drg No. FD-67)
75
-
-
All as per Serial item No. 160 above but for Almirah large steel (Glazed) complete ditto (Drg No. FD-104)
15
-
-
All as per Serial item No. 160 above but for Almirah medium steel (Glazed) complete ditto (Drg No. FD-104)
18
-
-
All as per Serial item No. 160 above but for Almirah large steel 1/2 H x 1/2 S complete ditto (Drg No. FD-114)
75
-
-
All as per Serial item No. 160 above but for Almirah medium steel 1/2 H x 1/2 S complete ditto (Drg No. FD-114)
150
-
-
All as per Serial item No. 160 above but for Almirah Med (Wire guage) front steel complete ditto (Drg No. FD-114)
18
-
-
All as per Serial item No. 160 above but for Book case steel (Glazed) complete ditto (Drg No. FD-90)
12
-
-
All as per Serial item No. 160 above but for Couch examination message complete ditto (Drg No. FD-114)
15
-
-
All as per Serial item No. 160 above but for Table cushioned complete ditto (Drg No. FD-135)
15
-
-
All as per Serial item No. 160 above but for Form without back (MS frames & Seat) complete ditto (Drg No. FD-77)
50
-
-
All as per Serial item No. 160 above but for Form with back (MS frames & Seat/back) complete ditto (Drg No. FD-78)
35
-
-
All as per Serial item No. 160 above but for Box ice steel complete ditto (Drg No. FD-73)
5
-
-
All as per Serial item No. 160 above but for Chair easy cushioned steelcomplete ditto (Drg No. FD-121)
150
-
-
All as per Serial item No. 160 above but for Chair CB 'A' steel (with arms) complete ditto (Drg No. FD-75)
50
-
-
All as per Serial item No. 160 above but for Chair CB (dinning) steel complete ditto (Drg No. FD-75)
60
-
-
All as per Serial item No. 160 above but for Chair invalid wheeled (Non-folding)complete ditto (Drg No. HFD-21)
12
-
-
All as per Serial item No. 160 above but for Trolley for clyinder steel complete ditto (Drg No. FD-132)
6
-
-
All as per Serial item No. 160 above but for Board for fire order/Hospital rules (steel) complete ditto (Drg No. FD-131)
20
-
-
All as per Serial item No. 160 above but for Trestle store room steel complete ditto (Drg No. FD-86)
15
-
-
All as per Serial item No. 160 above but for Table office officer steel complete ditto (Drg No. FD-84)
25
-
-
All as per Serial item No. 160 above but for Table office clerk/general Steel complete ditto (Drg No. FD-84)
50
-
-
All as per Serial item No. 160 above but for Rack adjustable 6 tier (1905x 915 x 610 mm) complete ditto (Drg No. FD-106)
180
-
-
All as per Serial item No. 160 above but for Rack adjustable 3 tier ( 990 x 915 x 610 mm) complete ditto (Drg No. FD-106)
55
-
-
All as per Serial item No. 160 above but for Side rack with trays ( 685 x 255 x 760 mm) complete ditto (Drg No. FD-97)
40
-
-
All as per Serial item No. 160 above but for Chair varendah complete ditto (Drg No. FD-359)
150
-
-
All as per Serial item No. 160 above but for Meat safe & milk complete ditto (Drg No. FD-47)
18
-
-
All as per Serial item No. 160 above but for Desk for School Drg CWE/SK/263(R) including Bench for School Drg CWE/SK/263 - NSB complete ditto
225
-
-
All as per Serial item No. 160 above but for Desk for School Drg CWE/SK/258 (R) including Bench for School Drg CWE/SK/263(R ) - NSB complete ditto
225
-
-
All as per Serial item No. 160 above but for Desk school child type (Type A) complete ditto (Drg No. FD-124)
180
-
-
All as per Serial item No. 160 above but for Almirah large steel 900 x 507 x 1950 mm Model Slimline Make Godrej complete ditto (Drg No. TP-Godrej)
50
-
-
All as per Serial item No. 160 above but for Chair writing steel cushion complete ditto (Drg No. FD-360)
100
-
-
All as per Serial item No. 160 above but for Bed Spl Wrought Iron1825 x 900 mmcomplete ditto (Drg No. SK)
150
-
-
All as per Serial item No. 160 above but for Table morturey Steel 2000 x 760x 760 complete ditto (Drg No. FD-143)
10
-
-
All as per Serial item No. 160 above but for Table steel 2100 x 900 x 760 mm complete ditto (Drg No. FD-144)
8
-
-
Material and labour for polishing to Sofa set 5 seater (Drg No. FD-383 / 258) by adhering to following steps complete all as specified and as shown on drawing:-
(a) First scapping the old tane polish,dirt stains on arm and on outer surfaces with emery paper or paper machine or costic soda and remove completely. b) Examine the surface and fill yellow oxide or wood filler/putty in the holes /cracks. c) The wooden surfaces shall be made smooth by sanding the surface with sand paper of about 120 grit in the direction of grains of wood.
d) Repeat the process with progrssively finner grains with 180-220 grit sanding paper to make the surface more finer.
e) Wipe out the surface and remove the dust with a fine cloth.
f) Wipe it again with cloth and apply a coat of french polish and let it dry.
g) Sand the surface again and apply next coat with a soft brush or cloth.
h) Let the surface dry completely and apply a clear coat over it for glossy finish surface.
(Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user requirement)
15
-
-
All as per Serial item No. 218 above but for Sofa set 4 seater complete ditto (Drg No. FD-383 )
12
-
-
All as per Serial item No. 218 above but for Sofa single seater complete ditto (Drg No. FD-383/272 )
150
-
-
All as per Serial item No. 218 above but forTable peg complete ditto (Drg No. FD-384 )
250
-
-
All as per Serial item No. 218 above but forTable centre 600 mm dia (malamine top) complete ditto (Drg No. FD-134 )
25
-
-
All as per Serial item No. 218 above but for Table dressing ladies complete ditto (Drg No. FD-32/374 )
45
-
-
All as per Serial item No. 218 above but for Table dressing gents complete ditto (Drg No. FD-31 )
190
-
-
All as per Serial item No. 218 above but for Teapoy complete ditto (Drg No. FD-34/382 )
150
-
-
All as per Serial item No. 218 above but for Table card 900mm x 900mm x 760 mm complete ditto (Drg No. FD-91 )
12
-
-
All as per Serial item No. 218 above but for Table centre (2 tier) KD type complete ditto (Drg No. FD-267/373 )
46
-
-
All as per Serial item No. 218 above but for Trestle store room complete ditto (Drg No. FD-86 )
10
-
-
All as per Serial item No. 218 above but for Table 610mm x 610 mm complete ditto (Drg No. FD-95 )
10
-
-
All as per Serial item No. 218 above but for PLS top 5' x 2'-10" complete ditto (Drg No. FD-289 )
25
-
-
All as per Serial item No. 218 above but for table dining 6 pers(KD type )complete ditto (Drg No. FD-269 )
35
-
-
All as per Serial item No. 218 above but for table PLS top 3' x 3' complete ditto (Drg No. FD-291 )
25
-
-
All as per Serial item No. 218 above but for table with marble top (3' x 2'6" x 2'6") complete ditto (Drg No. FD-300)
15
-
-
All as per Serial item No. 218 above but for table with marble top (4' x 2' x 2'6") complete ditto (Drg No. FD-299)
5
-
-
All as per Serial item No. 218 above but for table pantry with drawer complete ditto (Drg No. FD-295)
15
-
-
All as per Serial item No. 218 above but for table cook complete ditto (Drg No. FD-297)
10
-
-
All as per Serial item No. 218 above but for workshop bench (1800/1500 x 900 x 760) mm complete ditto (Drg No. FD-145)
5
-
-
All as per Serial item No. 218 above but for table wooden 5'x 2'10" complete ditto (Drg No. FD-296)
18
-
-
All as per Serial item No. 218 above but for table 10'x4'x 2'6" complete ditto (Drg No. FD-296)
10
-
-
All as per Serial item No. 218 above but for table office officer wooden complete ditto (Drg No. DB-4119)
15
-
-
All as per Serial item No. 218 above but for table office clerk wooden complete ditto (Drg No. DB-4120)
18
-
-
All as per Serial item No. 218 above but for table writing small complete ditto (Drg No. FD-67)
18
-
-
All as per Serial item No. 218 above but for table writing (KD type) complete ditto (Drg No. FD-268)
110
-
-
All as per Serial item No. 218 above but for table 3'x2' with drawer complete ditto (Drg No. FD-283)
35
-
-
All as per Serial item No. 218 above but for table 3'x2' complete ditto (Drg No. FD-55)
25
-
-
All as per Serial item No. 218 above but for table 3'x2' with marble top complete ditto (Drg No. FD-291)
15
-
-
All as per Serial item No. 218 above but for Peg set of 6 complete ditto (Drg No. FD-80)
75
-
-
All as per Serial item No. 218 above but for Peg set of 3 complete ditto (Drg No. FD-80)
160
-
-
All as per Serial item No. 218 above but for side board large complete ditto (Drg No. FD-26)
10
-
-
All as per Serial item No. 218 above but for locker bed side wooden complete ditto (Drg No. FD-222)
25
-
-
All as per Serial item No. 218 above but for Almirah mess utensil complete ditto (Drg No. FD-93)
25
-
-
All as per Serial item No. 218 above but for Almirah large wooden with shelves complete ditto (Drg No. FD-4116)
15
-
-
All as per Serial item No. 218 above but for Almirah medium wooden with shelves complete ditto (Drg No. FD-3959)
18
-
-
All as per Serial item No. 218 above but for Almirah medium wooden glazed complete ditto (Drg No. FD-4222)
18
-
-
All as per Serial item No. 218 above but for Almirah large wooden 1/2H x 1/2 S complete ditto (Drg No. FD-4049)
15
-
-
All as per Serial item No. 218 above but for Almirah medium wooden 1/2H x 1/2 S complete ditto (Drg No. FD-3050/3959)
16
-
-
All as per Serial item No. 218 above but for Board notice glazed complete ditto (Drg No. FD-99)
24
-
-
All as per Serial item No. 218 above but for Bin solid linen Hospital type complete ditto (Drg No. FD-70)
10
-
-
All as per Serial item No. 218 above but for Book shelf open large complete ditto (Drg No. FD-4121)
25
-
-
All as per Serial item No. 218 above but for Book shelf open small complete ditto (Drg No. FD-4120)
21
-
-
All as per Serial item No. 218 above but for Book case LP complete ditto (Drg No. F-8)
9
-
-
All as per Serial item No. 218 above but for chair dining cushion complete ditto (TP/SKT)
250
-
-
All as per Serial item No. 218 above but for Desk stand lecture complete ditto (Drg no :-FD-125)
2
-
-
All as per Serial item No. 218 above but for chair writing complete ditto (Drg no :-FD-202)
150
-
-
All as per Serial item No. 218 above but for chair WBB complete ditto (Drg no :-FD-56)
75
-
-
All as per Serial item No. 218 above but for Bed hard with ply top complete ditto (Drg no :- FD-264)
450
-
-
All as per Serial item No. 218 above but for chair easy complete ditto (Drg no :-FD-202)
150
-
-
All as per Serial item No. 218 above but for chair easy cushion complete ditto (Drg no :-FD-359)
350
-
-
All as per Serial item No. 218 above but for Desk wooden for KG complete ditto (Drg no -CWE(P)/SK-01)
230
-
-
All as per Serial item No. 218 above but for chair wooden for KG complete ditto (Drg no -CWE(P)/SK-02)
230
-
-
All as per Serial item No. 218 above but for Desk and Bench (NSB) complete ditto (Drg no -SKT-01)
102
-
-
All as per Serial item No. 218 above but for Desk and Bench (NSB) complete ditto (Drg no -SKT-02)
106
-
-
All as per Serial item No. 218 above but for Desk and Bench (NSB) complete ditto (Drg no -SKT-03)
120
-
-
All as per Serial item No. 218 above but for Table card and drawers complete ditto (Drg no -FD-288)
25
-
-
Material and labour for Melamine polishing to Bed hard TW special single (1825x900x660)mm (SK Drg) in VIP guest room of Officer Mess by adhering to following steps complete all as specified and as shown on drawing:- a) First scapping the old tane polish,dirt stains on arm and on outer surfaces with emery paper or paper machine or costic soda and remove completely. . b) Examine the surface and fill yellow oxide or wood filler/putty in the holes /cracks. c) Apply sanding sealer in wooden surface
d) The wooden surfaces shall be made smooth by sanding the surface with sand paper of about 220 grit in the direction of grains of wood.
e) Repeat the process with progrssively finner grains with 320 grit sanding paper to make the surface more finer.
f) Wipe out the surface and remove the dust with a fine cloth.
g) Apply a coat of melamine polish with spray gun and let it dry.
h) Next coat of melamine polish shall be applied with spray gun after one hour for glossy finish surface..
(Note: The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per the user requirement)
40
-
-
All as per Serial item No. 275 above but for Bed hard TW special King size (2000x1800x660) mm (SK Drg) complete ditto
9
-
-
All as per Serial item No. 275 above but for Bed hard TW special Queen size (1825x1200x660) mm (SK Drg) complete ditto
4
-
-
All as per Serial item No. 275 above but for Book case special glazed (SK Drg) complete ditto
5
-
-
All as per Serial item No. 275 above but for Chair dining cushioned special (SK Drg) complete ditto
130
-
-
All as per Serial item No. 275 above but for side board large TW Special (SK Drg) complete ditto
2
-
-
All as per Serial item No. 275 above but for sofa set 5 seater TW decorative with arm (SK Drg) complete ditto
5
-
-
All as per Serial item No. 275 above but for sofa single seater TW with arm (SK Drg) complete ditto
10
-
-
All as per Serial item No. 275 above but for stool dressing ladies cushion spl (SK Drg) complete ditto
4
-
-
All as per Serial item No. 275 above but for table bed side TW spl (SK Drg) complete ditto
100
-
-
All as per Serial item No. 275 above but for table dressing ladies TW spl (SK Drg) complete ditto
7
-
-
All as per Serial item No. 275 above but for table dining special TW round top dia 3'4" (SK Drg) complete ditto
65
-
-
All as per Serial item No. 275 above but for table dining special TW size 8"x3'9"x2'6" (SK Drg) complete ditto
2
-
-
All as per Serial item No. 275 above but for Peg table TW special glazed (SK Drg) complete ditto
18
-
-
All as per Serial item No. 275 above but for table centre TW special glazed (SK Drg) complete ditto
6
-
-
All as per Serial item No. 275 above but for bar counter TW special (SK Drg) complete ditto
2
-
-
All as per Serial item No. 275 above but for chair dining cushioned long back (SK Drg) complete ditto
10
-
-
All as per Serial item No. 275 above but for wardrobe 3 door with mirror TW special both internal and external (SK Drg) complete ditto
4
-
-
All as per Serial item No. 275 above but for wardrobe 2 door with mirror TW special both internal and external (SK Drg) complete ditto
4
-
-
All as per Serial item No. 275 above but for chair writing special TW cushioned (SK Drg) complete ditto
12
-
-
All as per Serial item No. 275 above but for rack magazine with 4 shelf 4'x6' (SK Drg) complete ditto
4
-
-
All as per Serial item No. 275 above but for sofa chair decorative TW spl without arm (SK Drg) complete ditto
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements