Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date21 Dec 2023
Closing Date29 Jan 2024
Tender Amount₹ 10,90,00,000
Costs
EMD
₹ 8,70,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Completion Of Incomplete Work For Augmentation For Repair And Calibration Facilities For Test And Measuring Equipment At Nd V
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_MES_540967_2Bid Award Id
ViewTender No
DDG CE V TOKEN 04 OF 2022-2023Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.
40
-
-
... More
Taking up or down steel tubing 20mm bore of pipe of any grade and connections including cleaning for refixing or removal to store or material taken back by contractor through credit complete all as specified and directed.
28.9
-
-
... More
Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.
1000
-
-
... More
Excavation over areas n. exc. 1.5m deep for foundations, beams, Pile caps and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.
100
-
-
... More
Excavation over areas exc. 1.5m and n. exc. 3.0m deep for foundations, beams, Pile caps and getting out in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge.
26.39
-
-
... More
All as per Item No.1.007 here-in-before but exc. 3.0m and n. exc. 4.5m in depth.
99
-
-
... More
All as per Item No.1.007 here-in-before but exc. 4.5m and n. exc. 6.0m in depth.
20
-
-
... More
Excavation in trenches n. exc. 1.5m wide and n. exc.1.5m in depth for foundations, shafts, wells, manholes, pier holes , laying of under ground cables or pipe etc., n exc 10 sq m on plan and getting out in soft/loose soil all as specified and as directed by the Engineer-in-Charge.
1046
-
-
... More
All as per Item No.1.010 here-in-before but exc. 1.5m and n. exc. 3m in depth.
400
-
-
... More
Excavation in trenches n. exc. 1.5m wide and n. exc.1.5m in depth for foundations, shafts, wells, manholes, pier holes , laying of under ground cables or pipe etc., n exc 10 sq m on plan and getting out in hard/dense soil all as specified and as directed by the Engineer-in-Charge.
40
-
-
... More
Use and waste of timbering (Whole of the timbering to a face Exc. 3 m & n exc. 5 m deep) as planking and strutting for excavations in trenches in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal complete all as specified and directed by Engineer-in-charge.
500
-
-
... More
Returning, filling in including, spreading, levelling, watering and well ramming in layers n. exc. 25cm thick complete all as specified and as directed.
60
-
-
... More
Material & labour for drilling or boring for 600mm nominal dia. bored cast-in-situ piles, through any or all types of strata i.e soft/loose soil, stiff clay, gravel, cobble stone, compact moorum, soft conglomerate or loose boulders, disintegrated rock, weathered rocks etc., (except hard rock for socketing depth) upto top of socketing depth/founding depth by adopting suitable method with perennial water and disposal of drilling/bored materials to a distance exc. 10.0km and n.exc 15.0km and depositing where directed complete all as specified and as directed by Engineer-in-Charge.
820
-
-
... More
All as per Item No.1.015 here-in-before but through hard rock for founding minimum 2D (Where D is dia of pile) Mtr depth for 600mm dia. nominal dia piles.
29
-
-
... More
Notes for Item Nos. 1.015 and 1.016:
(i) The depth of boring for piles shall be measured from existing ground/bed level/river bed top (as per soundings/reduced levels taken at the commencement of work) to the approved founding level.
(ii) It shall be ensured that the waste bentonite slurry/ drilled or bored material is pumped off from the premises to locations shown by GE by contractor at his own cost. The distance mentioned in description of item shall be the shortest distance from the centre of the building.
(iii) All channels/tanks made for bentonite circulations shall be filled with approved moorum obtained by contractor at his cost after clearing all bentonite cakes.
(iv) The contractor may use any approved method as approved by GE for boring without any extra cost to the Govt. The rates for boring of piles shall be inclusive of any method/ casing that may be used by the contractor for bored piles. Nothing extra shall be paid.
(v) For the purpose of payment of boring/drilling, description of hard rock shall be as given in particular specification.
(vi) The size of cutting tool shall not be less than diameter of pile by more than 75 mm.
(vii) The rates quoted by the contractor shall be inclusive of the rates for the shifting and setting up of piling rig as many times as required.
-
-
-
... More
Carrying out routine load test (working pile) as per standard procedure given in IS-2911 (Part IV) 1985 by static test method for 600mm dia. Piles for a test load of 255 tonne complete all as specified and as directed by Engineer-In-Charge Note:-
(i) The pile shall be selected by the GE.
1
-
-
... More
Removing demolished building materials/ debris etc (other than soil obtained from earth work) to a distance exc 10.0km and n.exc 15.0km beyond the lead included in the rates including loading and unloading and depositing outside the MD land at GVMC designated places complete all as specified and as directed by Engineer-in-charge.
Note:- Definition of load shall be as per section 21 of SSR Part-I.
13
-
-
... More
Removal of excavated material to a distance exc. 10.0 Km but n. exc. 15.0 Km and depositing where directed complete all as specified and as directed by the Engineer-in-Charge.
Notes:-
(i) Tenderer shall finalise GVMC designated places before quoting the tender. If designated place may be varied during execution, no claim shall be entertained on this account.
(ii) Approval if any to be obtained from GVMC for dumping the excavated material of GVMC designated places, the same shall be obtained by the contractor. Nothing extra shall be paid on this ground.
1153
-
-
... More
M&L for Sand filling in floors or pavings or in foundations laid in layers n.exc. 15cm thick spread, levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge.
19
-
-
... More
M&L for hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface using broken stone all as specified and directed by Engineer-in-charge.
96
-
-
... More
M&L for moorum/red bajri filling in floors or pavings or in foundations, brought from outside MD land of any lead, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
19
-
-
... More
M&L for Anti termite treating the backfill in contact with the plinth beam at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) with approved chemical and complete all as specified and as directed by engineer-in-Charge.
50
-
-
... More
M&L for Anti termite treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area with approved chemical and complete all as specified and as directed by engineer-in-Charge.
90
-
-
... More
M&L for Anti termite treating the soil along with external perimeter of the building at the rate of 2.25 litres of emulsion per metre of the perimeter of building with approved chemical and complete all as specified and as directed by engineer-in-Charge. Note for 1.023 to 1.025: Only approved chemical shall be used as per IS 6313 (Part-2): 2013 and applicators of ATT are registered by the Pest Control Association of India (PCAI)/ Indian Pest Control Association (IPCA)
120
-
-
... More
M&L for PCC 1:3:6 type C2 (using 40mm graded Granite stone aggregate) as in foundation, filling, mass concrete etc. complete all as specified and as directed by the Engineer-in-Charge.
25
-
-
... More
M&L for PCC 1:4:8 type D2 (using 40mm graded Granite stone aggregate) as in foundation, filling, mass concrete and underneath pile caps, suspended flooring/slab, beams, plinth protection, surface channels, drains etc. complete all as specified and as directed by the Engineer-in-Charge.
130
-
-
... More
M&L for PCC type C1 1:3:6 (using 20mm graded stone aggregate) as in cast in situ in lintels up to 1.5m span, cills, steps, seismic and other similar bands, plinth courses, parapets, copings, benching/ haunching, bed plates, roof padding and the like including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and directed by Engineer-in-charge.
5
-
-
... More
Material and labour for providing precast cement concrete (RCC) 1:2:4 type B1 (20mm granite graded stone aggregate) in cover slabs for manholes/drains, chullah hoods, chajjas, water troughs, mangers, shelves, baffle wall and similar articles set in CM 1:4 with plain fair faces, including necessary formwork etc., complete all as specified and as directed by Engineer-in-Charge.
Note: Reinforcement shall be measured and paid separately under respective item of schedule 'A'
21
-
-
... More
M&L for reinforced cement concrete (Ready mix concrete) by design mix M-40 grade (Using 20mm graded stone aggregate) as in bore holes using portland slag cement and admixture Auramix 400 of fosroc/Smartcare maximo plast PX range of Asian paint or equivalent approved make for piles in tremie method including necessary dewatering, formwork, concrete mixed in RMC plant, transporting, placing, compacting, vibrating etc., complete all as specified and directed by the Engineer-in-Charge.
205
-
-
... More
Notes:
(i) Design mix shall be as per IS-456-2000 and max size of aggregate shall not exceed 20mm and the slump shall be 150 to 180mm.
(ii) Reinforcement shall be measured and paid separately.
(iii) Unit rate shall be deemed to include interalia for preliminary design mix, works test cubes as specified.
(iv) Minimum cement content shall be 400 Kg/ Cu.m. of concrete for M40 (Piles) using Portland slag cement with minimum slag content of 50% (fifty percent) which ever is higher.
(v) Admixture shall be added as per manufacturer instructions. The dosages of admixture shall be as specified by manufacturer or considered by lab during finalization of design mix. The rate for admixture Auramix 400 of fosroc/Smartcare maximo plast PX range of Asian paint or Equivalent shall be deemed to be included in the quoted rate.
(vi) The unit rate shall be deemed to include carrying out non-destructive integrity test for 100% of the total number of piles as per IS 14893-2001 in the presence of the authorised representative of Engineering College (AU)/ IIT Chennai and the test results shall be vetted by the same authorities.
(vii) In case at the time of mix design cement content is increased beyond minimum content given no extra payment will be made.
(viii) Standard manufactured cover blocks as per IS should be used, Site cast cover blocks not be used
-
-
-
... More
M&L for reinforced cement concrete of grade M-40 (Design mix using 20mm graded stone aggregate) using ready mix concrete including supply and mixing of admixtures, as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, pile caps, suspended floor beams & slabs, plinth protection, basement slabs, under-reamed piles etc. using portland slag cement and handling, conveyance, errection with alignment in true position complete all as specified and as directed by the Engineer-in-Charge.
87
-
-
... More
All as per item No.1.031 here-in-before but slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, duct slab and in shelves and the like.
251
-
-
... More
All as per item No. 1.031 here-in-before but as in in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc
21
-
-
... More
All as per item No.1.031 here-in-before but as in columns, Pillars, piers, vertical bands, posts and struts etc.
46
-
-
... More
All as per item No.1.031 here-in-before but as in floor beams, roof beams, cantilevers, bressumers, middle beams, lintels over 1.5m span and lintel bands etc.
78
-
-
... More
All as per item No. 1.031 here-in-before but fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like
6
-
-
... More
All as per item No. 1.031 here-in-before but in chajjas and similar works.
3
-
-
... More
All as per item No. 1.031 here-in-before but in stairs and similar works.
11
-
-
... More
Notes for item Nos. 1.031 to 1.038:
(i) Minimum cement content shall be 400 Kg/Cu.m. of concrete for pile caps, suspended floor beams, slabs and footings, platform (Covered under item No.1.031) and shall be 360 Kg/Cu.m .of concrete for M-40 using Portland slag cement with minimum slag content of 50% (fifty percent) for items covered under item Nos. 1.032 to 1.038.
(ii) Design mix shall be as per IS-456-2000. Maximum size of aggregate shall not exceed 20 mm and slump shall be 50mm to 100mm and maximum water cement ratio 0.4. (iii) Approved admixtures (Auramix 400 of fosroc/Smartcare maximo plast PX range of Asian paint or Equivalent) shall be mixed as per manufacturer's instructions. The rate of admixtures shall be deemed to be included in unit quoted rate.
(iv) Unit rate shall be deemed to include for interalia for preliminary design mix and works test cubes.
(v) Reinforcement shall be measured and paid for separately.
(vi) In case at the time of mix design cement content is increased beyond minimum content given no extra payment will be made.
(vii) Standard manufactured cover blocks as per IS should be used, Site cast cover blocks not be used
-
-
-
... More
Chipping of laitance concrete in piles above cut off level upto a maximum of 1m from cut of level and disposal to distance of exc. 5.0Km but n. exc. 12Km and depositing where directed.
2
-
-
... More
M&L for brick work using fly ash bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.
771.97
-
-
... More
M&L for brick work using fly ash bricks, straight or curved on plan to any radius in half brick thick walls (100mm thick) built in cement mortar 1 :4 including supply and fixing of 2 Nos of 8mm dia CRS TMT bars at every fourth course of brick work complete all as specified and as directed by the Engineer-in-Charge.
385
-
-
... More
M&L for walling of square rubble, regular bonded, bedded and solidly hearted brought up to courses built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
35
-
-
... More
M&L for steel formwork to sides of concrete foundations, pile caps, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge.
330
-
-
... More
M&L for steel formwork to sides, faces of vertical walls, water tanks, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter and the like for fair finished surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge
45
-
-
... More
All as per item No.1.044 here-in-before but to soffits of suspended slabs such as roof slabs, floor slabs, waist slabs, landings and similar work (horizontal or sloping or curved)
880
-
-
... More
All as per item No.1.044 here-in-before but to sides and soffits of floor or roof beams, cantilevers, bressumers, lintel beams, RCC bands etc.
422
-
-
... More
All as per item No.1.044 here-in-before but to stair cases with slopping or stepped soffits including risers and stingers (excluding landing) flat etc.
26
-
-
... More
All as per item No.1.044 here-in-before but to sides of pillars, posts, struts, columns and the like
384
-
-
... More
All as per item No.1.044 here-in-before but to sides and soffits of chajjas including supports overhangs etc. and splays between floor and beam etc.
60
-
-
... More
M&L for steel form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs etc. Exc. 10cm but n. exc. 20cm wide for fair finished surfaces of concrete complete all as specified and directed by the Engineer-in-Charge.
1504
-
-
... More
S&F factory made solid PVC door frame of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply and fix in openings as per specification and drawing.
370
-
-
... More
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer in charge.
115
-
-
... More
S&F 150mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.
128
-
-
... More
S&F 16mm dia 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-charge.
64
-
-
... More
S&F 125mm size butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, type B-21 complete all as specified and directed.
192
-
-
... More
S&F for 150mm long aluminium alloy handles, cast type, anodised complete all as specified and directed.
128
-
-
... More
S&F for 125mm long extruded brass handles, fabricated type, polished complete all as specified and directed.
34
-
-
... More
S&F brass mortice locks, vertical type 100mm size 4 levers all as specified and as directed by Engineer-in-Charge.
34
-
-
... More
S&F floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
82
-
-
... More
S&F floor door stopper 150mm long of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.
47
-
-
... More
S&F aluminium (extruded section) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
82
-
-
... More
S&F aluminium (extruded section) door closer hydraulically regulated, designation No.1, universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
47
-
-
... More
S&F Double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
4
-
-
... More
Supply and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screw etc., to the side windows complete all as specified and directed by Engineer-in-Charge.
160
-
-
... More
M&L for reinforcement in any situation using Corrosion resistant TMT steel bars of grade Fe-500D, 10mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
66460
-
-
... More
All as per item No. 1.065 here-in-before but 6mm dia and upto 8mm dia bars.
9652
-
-
... More
All as per item No. 1.065 here-in-before but 5mm dia. and over upto and including 12mm dia. as in stirrups, spacers and binders.
11203
-
-
... More
M&L for framed work such as grills, gratings,etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railings, framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed by Engr-In -Charge.
1000
-
-
... More
Material and labour for structural glazing with 6mm thick coloured structural reflective glass, aluminium transom bar/frame(61.5 X 56 X 2.6mm), 48x93 LG bolt, nuts & washers, structural silicon seal with double layer face etc., all as shown in Arch drawing No. DGNP/WD-1974 sheet No 16/22 dated 26 Mar 2018 with revisions and as directed by Engineer-in-charge.
300
-
-
... More
M&L for providing and installing MS liner for bored cast-in-situ concrete piles with necessary stiffeners , driving shoe with continuous welding including cutting, bending welding etc. confirming to Fe-410-W (Gde E-250 Quality BR/B0) including applying one coat of primer with two coats of EPOXY based anticorrosive treatment as per the manufacturer's instruction all as specified and as directed by the Engineer-in-Charge.
Notes:- (i) Rate shall be inclusive of cutting the liner at cut off level. The rate is deemed to include for cutting, removal and salvage value of the material so obtained.
(ii) MS liner shall be driven upto refusal level or -10.00mtr level whichever is lesser irrespective what shown in the drawing, the occurrence of refusal level will be decided by GE at site based on visual inspection of bailer samples from pile bore hole, past experience and laboratory test result. The decision of GE in this regard will be final and binding.
(iii) MS liner will be measured and paid up to the cut off level only of pile . Additional MS liner if used for convenience of construction shall be included in the rates quoted. No extra shall be paid separately on this account.
26736
-
-
... More
S&F factory made aluminium powder coated frame for doors, partitions, windows and ventilators with one or more rebates of extruded built up standard tubular and other section of approved make according to IS 1868 (Thickness or powder coating not less than 50 micron).) fixed with rawal plugs, aluminium anodised screws or fixing with clamps or with expansion hold fasteners including necessary filling up of gaps of junctions at top and bottom and sides with required PVC/neoprene felt etc. Aluminium sections should be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, PVC/Neoprene gasket for glazing, panelling, aluminium anodised screws etc. complete all as specified and as directed by the Engineer-in-Charge.
3500
-
-
... More
S&F factory made powder coated aluminium door shutters, sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws complete all as specified. (thickness of powder coating not less than 50 micron) as per architectural drawings and complete all as specified and as directed by the Engineer-in-Charge.
Note : Only aluminium shutter for the doors shall be measured in sqm. All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc, Pre-laminated particle board and sheet glass shall be measured and paid separately under relevant items
750
-
-
... More
S&F factory made powder coated aluminium sliding/ side hung type window/ ventilator shutters without sash bars, section weighing not less than 0.55 Kg/RM with extruded built up standard tubular and other sections of approved make according to IS (thickness of powder coating not less than 50 micron) including necessary glazing clips weighing not less than 0.124 Kg/RM, for fixing sheet glass anodised aluminium fitting/fixture such as required number of rollers of suitable size, interlocking cleats/plates etc as required for complete fixing window shutters as per architectural drawings and complete all as specified and directed by the Engineer-in-Charge.
Note : Only aluminium shutter for the windows/ ventilators shall be measured in sqm. Sheet glass and hard ware such as butt hinges, tower bolts, handles etc, shall be measured and paid separately under relevant items
750
-
-
... More
S&F factory made aluminium powder coated decorative grill for doors and windows with one or more rebates including jointing cleats/beading 'U' or 'H' channel for fixing etc. complete all as specified and as directed by the Engineer-in-Charge.
1000
-
-
... More
Supply & filling weather structural non sag elastomeric PU sealent over backer rod of approved quality to the gap between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ gypsum work as per architectural drawings and complete all as specified and directed by the Engineer-in-Charge.
1300
-
-
... More
S & F of Stainless Steel hand rail of grade 304, gauge 16. The baluster is made of 50mm dia pipe as per drawing fixed to alternate tread using base plate of thickness 8mm and 3 Nos of bolt with SS cap. Top hand rail is made of 50mm dia SS pipe, 3 Nos of horizontals of 20mm dia SS pipe is fixed in position including supply and fixing 12mm thick toughened glass in between balusters with fittings as shown in Arch drawing No. DGNP/WD-1974 sheet No 13/22 dated 26 Mar 2018 with revisions and as directed by Engineer-in-charge.
90
-
-
... More
M&L for factory made steel rolling shutters, push pull or manual type with ball bearing with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, thickness of laths 1.25 mm complete all as specified and directed.
7
-
-
... More
M&L Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
4
-
-
... More
M & L for 3mm thick weight not less than 3.50 Kg/Sqm APP modified polymeric membrane with non-woven polyster reinforcement laid by torch application method on prepared/plastered surface of roof slab by throughly wire brushing, washing, drying up cleaned of all foreign matter and dust and applied with one coat of approved bituminious primer @0.40 Liter/Sqm complete all as specified and directed by the Engineer-in-Charge.
Note:-
(a) Quoted rate deemed to be included the cost of preparation of surace and applying bitumenious primer.
(b) Side overlap shall be 10cm and end overlap shall be 15 cm. Over laps shall not be measured for payment. Quoted rate is deemed to include for above provision.
(c) The unit quoted rate shall also include 24 hrs ponding test.
900
-
-
... More
M & L for a coat of bituminous aluminium paint @ 0.1 Kg/Sqm to finish the roof treatment complete all as specified and directed by the Engineer-in-Charge.
40
-
-
... More
M & L for hydraulically pressed cement concrete tiles of size 200mmx200mmx20mm confirming to IS 1237-1980 as in roof treatment, set in CM1:3 laid over 15mm thick screed bed in CM 1:4 mixed with water proofing compound complete all as specified and as directed. Note: Supply of WPC will be measured and paid for separately.
860
-
-
... More
M&L for 12mm thick pre-laminated particle board interior grade pre-laminated on both sides with decorative choice lamination and fixed in aluminium partitions/doors with aluminium glazing clips complete all as specified and directed by the Engineer-in-Charge.
50
-
-
... More
Supply and fix suspended ceiling of gypsum board of 12/12.5mm thick conforming to IS with GI perimeter channel of size 20 x 30 x 27 x 0.9mm (having one flange of 20mm and another flange of 30mm and web 27mm) along perimeter of ceiling, screwed fixed to wall with help of nylon sleeves and screws of 610mm centre to centre suspending GI infemedia techchannels of size 15 x 45 x o.9mm thick ( two flanges of 15mm each and web 45mm) from the soffit 1200 mm centre to centre both ways with ceiling angle soffit cleat of size 27 x 37 x 25 x 1.6mm thick fixed to soffit with rawl plug. Ceiling section of 90 x 25 x 5mm fixed to the intermediate channels with the help of connecting clip 2.64mm dia and in direction perpendicular to the intermediate channel at 365 mm centre fixing gypsum board with screws 250 mm centre to centre including jointing compound joint paper tape and drywall top coat and all as specified and shown on drawing No. DGNP/TD/211 sheet 1/1 and as per manufacturers instructions.
1100
-
-
... More
M&L For wall panelling consisting of board of size 1200 mm X2400 mm with Gypsteel Ultra of Gyproc Gyptone Quattro41,16% perforation area of board and hole size of 12 mm thick Gyptone Sixto 63 board of size 1200 mm X 2400 mm, 15% perforation area and perforation of 12 mm hexagonal with accoustic tissue having NRC 0.6-0.75 including frame work made of roll formed GI Sheet with powder coating consisting of Gypsteel Ultra floor and ceiling having equal flanges of 32 mm and 0.5mm thick, fixed to the wall spacing of 610 mm centre to centre with dash fastener of 12 mm length(or) suitable anchor fastener (or) metal screws with nylon steel Ultra studs 48 mm wide having one flange of 34 mm and 0.50mm thick fixed vertically with in flanges of floor and placed at a spacing of 600 mm centre to centre including fixing of partition fixed flush to walls with suitable anchor fastener nylon plugs at spacing of 450 mm centre to centre and fixing Gyptone Quattro 41 board of size 1200mm X 2400mm having four perforation area of board and hole size of 12 mm square shape gyptone Sixto 63 board of size 1200mm X 2400 mm having four perforation area and perforation of 12 mm hexagonal dia shape plastic tissue having NRC 0.6 to 0.75 by 25 mm long dry wall and ceiling channels at the spacing of 300 mm centre to centre of tiles are finished to a flush finish with recommended coating tape, angle beads at corners (125mm X 25mm X 0.5mm) two coats of primer suitable for board as per Saint Gobain specifications. Providing glass wool of 48 kg per Cum of required thickness can be wall and board between the studs to get the higher sound proof complete all as per specifications of manufacturers and as directed by Engineer-in-Charge.
Make: Armstrong(Gyproc wall lining systems) or equivalent approved make.”
120
-
-
... More
M&L for 18 to 20mm thick polished granite (of any type) work (table rubbed and polished ) as in floors, steps, jambs, pillars sides, window cills , cooking/WHB platforms and like in 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed by the Engineer-in-Charge.
400
-
-
... More
Extra for chamfer, splays or arris in face work to granite slab/kota stone, exc 15mm but not exc 50mm wide and complete all as specified and directed by the Engineer-in-Charge.
675
-
-
... More
M&L for machine cut kota stone slab 18 to 20mm thick as in floors over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
1010
-
-
... More
All as per item No. 1.087 here-in-before but work on vertical surfaces such as in skirtings and risers of steps etc.
50
-
-
... More
M&L for 150mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of floor all as specified and as directed by the Engineer-in-Charge.
300
-
-
... More
M&L for 40mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded hard granite stone aggregate) as in floor, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
350
-
-
... More
M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Note-: The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm construction joints to be provided and joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.
61
-
-
... More
M&L for coloured glazed ceramic tiles 300X450X7 mm thick/300x600x7 to 8mm thick, set and jointed in neat cement slurry and pointed in coloured cement in vertical surfaces such as skirting/dado etc., all as specified and directed
1150
-
-
... More
M&L for coloured non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.06 Sq.m. but n. exc. 0.11 Sq.m. in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and directed.
340
-
-
... More
M&L for 8-10 mm thick double charged vitrified ceramic tiles (square/rectangular) polished, area of each tiles exc. 0.36 Sq.m. but n. exc. 0.42 Sq.m., in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile surfaces complete all as specified and directed.
2700
-
-
... More
All as per item No. 1.094 here-in-before but work on vertical surfaces such as in skirtings, dados and risers of steps etc.
Notes for Item Nos. 1.087, 1.088, 1.092 to 1.095:-
Screed bed/ Bedding layer/backing coat will be measured and paid separately
200
-
-
... More
M & L for Machine pressed pre-cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and no pigment over 50mm thick sand bed complete all as specified and directed by the Engineer-in-Charge.
Note: Rate includes supply and filling of sand
300
-
-
... More
M&L for rendering 5mm in CM 1:3 as in on vertical fair faces of brick work or concrete surfaces, finished fair and even without using extra cement.
100
-
-
... More
M&L for rendering 5mm in CM 1:3 as in ceilings over surfaces, finished even and smooth without using extra cement.
1238.23
-
-
... More
M&L for rendering 10mm in CM 1:3 mixed with water proofing compound as per manufacturer's instructions as in on vertical fair faces of brick work or concrete surfaces, finished fair and even without using extra cement.
Note: Supply of WPC will be measured and paid separately.
450
-
-
... More
M&L for 10mm thick backing coat for rendering on fair faces of brick work or concrete surfaces in CM 1:3 and finished the surface fair and even to receiving topping.
1400
-
-
... More
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and smooth without using extra cement.
2472.44
-
-
... More
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in two layers. 10mm thick in cement mortar 1:4 followed by 5mm thick plaster in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions and finish the surface fair and even without using extra cement.
Note: Supply of WPC will be measured and paid separately.
4000
-
-
... More
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions and finish the surface even and smooth without using extra cement. Note: Supply of WPC will be measured and paid for separately.
45
-
-
... More
M&L for 15mm thick rendering on fair faces of stone masonry surfaces in cement mortar 1:4 and finish the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
145
-
-
... More
M&L for 15mm thick screed bed or bedding layer in CM (1:4) for laying floor finishes complete all as specified and directed by Engr-In -Charge.
4450
-
-
... More
M&L for 20mm thick screed bed or bedding layer in CM (1:4) for laying floor finishes complete all as specified and directed by Engr-In -Charge.
700
-
-
... More
Supply only Integral Water Proofing Compound.
700
-
-
... More
M&L for providing and applying putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of plastic emulsion paint over a coat of primer on ceiling including preparation of newly plastered surfaces all as specified and as directed by the Engineer-in-charge.
4400
-
-
... More
M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying Two coats of plastic emulsion paint over a coat of primer on walls including preparation of newly plastered surfaces all as specified and as directed by the Engineer-in-charge.
8000
-
-
... More
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon dditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed by Engineer-in-charge.
4450
-
-
... More
Supply and fixing of 5mm thick sheet glass of ordinary quality with frosted on one side of approved brand and shade fixed in position with and including PVC/Neoprene gasket for glazing, glazing clips in doors, windows, partitions in squares not exc 0.50 Sqm in each pane etc.complete all as specified and as directed by Engineer-in-charge..
50
-
-
... More
All as per item No. 1.111 above but exc. 0.5 Sq.m. each panel.
250
-
-
... More
Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed by Engineer in charge.
300
-
-
... More
M&L for 12mm thick toughened glass in door shutter including necessary fixtures and fittings for SS patches, locks, handles and engraving as shown in Arch drawing No. DGNP/WD-1974 sheet No 17/22 dated 26 Mar 2018 with revisions and as directed by Engineer-in-charge.
11
-
-
... More
S&F figured glass 3mm thick, pinhead type of approved brand and shade fixed in position with and including PVC/Neoprene gasket for glazing, glazing clips in ventilators in squares n. exc. 0.5 sq. m each pane complete.
20
-
-
... More
M&L for preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
320
-
-
... More
M&L for preparation of new or previously untreated surfaces of wood or wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
50
-
-
... More
S & F 10000 Litres capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position (nearly top of the building) complete all as specified and directed by the Engineer-in-Charge.
2
-
-
... More
S & F 2000 Litres capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered, hoisted and fixed in position complete all as specified and directed by the Engineer-in-Charge.
6
-
-
... More
S & F 1000 Litres capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered, hoisted and fixed in position complete all as specified and directed by the Engineer-in-Charge.
12
-
-
... More
S&F 15mm dia bore chromium plated bib taps, fancy type, cast copper alloy quarten turn, screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
70
-
-
... More
S&F 15mm bore chromium plated pillar taps, fancy type, cast copper alloy quarten turn, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer in charge.
51
-
-
... More
S&F chromium plated 15mm bore stop valves, fancy type, cast copper alloy, with long shank and cup (concealed), screwed down high pressure quarten turn screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer in charge.
102
-
-
... More
S & F 20mm dia ball brass valves, high pressure, with polythylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge
12
-
-
... More
S&F 150mm bore PVC (SWR) rain water pipes single socketed in any length with all necessary out let bends, shoes, gratings, offset pieces, rubber ring joints laid in trenches and floors or fixed to wall with stack clamp/brackets complete all as specified and directed.
150
-
-
... More
S&F 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches and floors or fixed to wall with stack clamp/brackets complete all as specified and directed.
176.2
-
-
... More
S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches and floors or fixed to wall with stack clamp/brackets complete all as specified and directed.
100
-
-
... More
S&F PVC (SWR) vent cowl suitable for 110mm dia pipes including jointing with solvent complete all as specified and as directed by the Engineer-in-charge.
40
-
-
... More
S&F PVC (SWR) vent cowl suitable for 75mm dia pipes including jointing with solvent complete all as specified and as directed by the Engineer-in-charge.
26
-
-
... More
S&F 110 mm dia PVC (SWR) bend any radius including jointing with solvent complete all as specified and as directed by the Engineer-in-charge.
28
-
-
... More
S&F 75 mm dia PVC (SWR) bend any radius including jointing with solvent complete all as specified and as directed by the Engineer-in-charge.
20
-
-
... More
S&F 110mm dia PVC (SWR) branch pieces, (single Y/T), equal or unequal, ordinary or inverted with oval access door including jointing with solvent complete all as specified and as directed by the Engineer-in-charge.
30
-
-
... More
S&F 75mm dia PVC (SWR) branch pieces, (single Y/T), equal or unequal, ordinary or inverted with oval access door including jointing with solvent complete all as specified and as directed by the Engineer-in-charge.
24
-
-
... More
Supply and fix PVC floor/nahani traps 110mm dia of outlet with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed by Engineer in charge.
40
-
-
... More
M&L for PVC (SWR) gully trap 125/100mm setting and jointing with solvent complete all as specified and as directed by Engineer in charge.
40
-
-
... More
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in concrete bed to drain pipes including packing under and haunchig against the sides of pipes after they are laid and tested for 150mm dia bore all as specified and as directed by Engineer-in-Charge.
145
-
-
... More
S&F 150mm dia RCC hume pipe with collar, NP-2 type of approved make laid in trenches and jointed in cement mortar complete all as specified and directed by Engineer-in-Charge.
145
-
-
... More
Supply and fix Galvanised steel water tubing 15 mm dia medium grade conforming to IS:1239 (Part I) including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed by the Engineer-in-charge.
300
-
-
... More
All as per item No. 1.138 here-in-before but 25mm dia
100
-
-
... More
All as per item No. 1.138 here-in-before but 40mm dia Note:- for Items No. 1.138 to 1.140- GI tubing inside the building shall be concealed and outside be on surface. Necessary cost component thereto be included in the quoted rate.
50
-
-
... More
S&F Vitreous China half stall type urinals, white (excluding flushing cistern and flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including 32 mm dia PVC polythene waste pipe of suitable length from the urinal to trap of below complete all as specified and directed by Engineer -In-Charge.
19
-
-
... More
S&F urinals spreader of PTMT any colour for fixing with 15mm dia pipe min wt 600 gms including union and clamps complete all as specified and directed by Engineer -In-Charge.
19
-
-
... More
S & F vitreous china urinals partition plate coloured of size 310x700mm including grouting complete all as specified and directed.
38
-
-
... More
S&F Toilet paper holder of vitreous china box type fixed to walls with chromium plated brass screws complete all as specified and as directed by Engineer - in - Charge.
32
-
-
... More
S&F vitreous china wash hand basin, white, flat back, size 630x450mm excluding taps, waste including brackets including cutting for and pinning in ends of brackets, 40mm dia CP brass waste fittings complete all as specified and as directed by Engineer - in - Charge.
12
-
-
... More
Supply and fix oval type coloured vitreous china wash basin with and including waste coupling and waste pipe, and counter sunk on granite top complete all as directed by the Engineer-in-charge.
Note:- Granite will be measured paid separately
38
-
-
... More
S&F vitreous china Wash down water closet pan EWC (Pedestal pattern), white with 'P'or 'S' trap étc, (excluding flushing cistern and flush pipe) including plastic water closet seat , closed pattern with flat bottom cover, mild steel chromium plated or aluminised hinging device, fixing bolts, etc complete all as specified and as directed by Engineer - in - Charge.
44
-
-
... More
Supply and fix PVC valve less, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe etc complete fixed with CP brass screws complete all as specified and as directed by Engineer in charge.
44
-
-
... More
S&F PVC connection (high density) 15mm dia 450mm with PTMT nuts both ends with rubber washer all as specified and directed.
113
-
-
... More
Supply and fix 450 mm x 600 mm bevelled edge mirror 8 mm thick of selected quality glass mounted on 6 mm thick commercial plywood/ AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror complete all as specified and as directed by Engineer - in - Charge.
51
-
-
... More
M&L for PCC (1:2:4) type B0 using 12.5mm graded Granite stone aggregate as in roof padding mixed with water proofing compound as per manufacturer's instructions complete all as specified and as directed by the Engineer-in-Charge.
Note: Supply of WPC will be measured and paid for separately
40
-
-
... More
S&F RCC hume pipe septic tank capacity for 100 users complete all as specified and as directed by Engineer in Charge.
2
-
-
... More
M&L for soakage pit for 100 users including all necessary earth work in any type of soil, PCC (1:3:6) in foundation, RR masonry work in CM (1:4), RCC cover slab in M-25, filling with brick bats etc. complete all as specified and complete with all necessary fitting shown in Drg. No. DGNP/TD-202 dated 07-06-02 complete all specified and as directed by Engineer in Charge.
2
-
-
... More
S&F GI water bar 230mm wide 22 gauge fixed in concrete as in construction joints complete all as specified and directed.
350
-
-
... More
S&F special threaded nozzle (for injection of grout) 12mm dia. length equal to half the depth of slab be placed in a grid pattern during concreting at a regular intervals not exceeding 1.5 m c/c all over the raft along the construction joint line and critical points as considered necessary. (The nozzle should be kept plugged during concreting to keep out grit and dirt) complete all as specified and as directed by Engineer in charge.
150
-
-
... More
M&L for non-shrink polymeric waterproofing grouting compound (CICO or equivalent) mixed with neat cement slurry be injected through the nozzels under pressure not exceeding 2 Kg per Sq.m. to ensure that the grout runs through the pours and cracks in the concrete and finally all the grouting nozzels be sealed off with CICO SOPAPLA or equivalent complete all as specified and as directed by Engineer in charge.
150
-
-
... More
Fixing only in position for reinforcement in any situation using Corrosion resistant TMT steel bars of grade Fe-500D, 10mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
Note:- Necessary reinforcement will be supplied under schedule B free for fixing only.
3441.8
-
-
... More
Installing only MS liner for bored cast-in-situ concrete piles with necessary stiffeners , driving shoe with continuous welding including cutting, bending welding etc. including applying one coat of primer with two coats of EPOXY based anticorrosive treatment as per the manufacturer's instruction all as specified and as directed by the Engineer-in-Charge. Notes:-
(i) Necessary liner shall be supplied under schedule B free for fixing only.
(ii) Rate shall be inclusive of cutting the liner at cut off level. The rate is deemed to include for cutting, removal and salvage value of the material so obtained.
(iii) MS liner shall be driven upto refusal level or -10.00mtr level whichever is lesser irrespective what shown in the drawing, the occurrence of refusal level will be decided by GE at site based on visual inspection of bailer samples from pile bore hole, past experience and laboratory test result. The decision of GE in this regard will be final and binding.
5000
-
-
... More
S & F 40mm dia ball brass valves, high pressure, with polythylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge
2
-
-
... More
S & F 25mm dia ball brass valves, high pressure, with polythylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge
8
-
-
... More
S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 600mm long fixed with screws complete all as specified and as directed by Engineer - in - Charge.
50
-
-
... More
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
S & F 25mm dia stainless steel curtain rod including decorative brackets in any length stainless decorative type with two Nos finial (in each rod fixed over window/door) complete all as specified and as directed by the Engineer-in-Charge.
250
-
-
... More
M&L for Preparation of newly unplastered surfaces of walls, brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, complete all as specified and as directed by the Engineer-in-Charge.
250
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - I
-
-
-
... More
SCHEDULE "A" PART - II [INTERNAL ELECTRIFICATION]
-
-
-
... More
M&L for point wiring with 1.5 Sq.mm. (nominal cross sectional area) FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V graded confirming to IS 694-1977 (For Phase and neutral) drawn in and including rigid steel conduit of 20mm dia. ERW rigid steel conduit and accessories, medium grade as per IS 9537 (Part-I 1983) with conduit accessories, surface/recessed/concealed including one run of 1.5 Sq.mm. one single core FRLS PVC unsheathed cable with multi stranded copper conductor as earth continuity conductor and connected to common earth dolly for one light/fan/exhaust fan/wall mounted fan point controlled by one switch/ 5 Amps multi purpose switch socket combination on independent terminal box or call bell point on independent board. complete all as specified and as directed by the Engineer-in-Charge.
678
-
-
... More
M&L for point wiring with 1.5 Sq.mm. (nominal cross sectional area) FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V graded confirming to IS 694-1977 (For Phase and neutral) drawn through existing rigid steel conduit including one run of 1.5 Sq.mm. one single core FRLS PVC unsheathed cable with multi stranded copper conductor as earth continuity conductor and connected to common earth dolly for one light/fan/exhaust fan/wall mounted fan point controlled by one switch/ 5 Amps multi purpose switch socket combination on independent terminal box or call bell point on independent board. complete all as specified and as directed by the Engineer-in-Charge.
620
-
-
... More
All as per item No. 2.01 here-in-before but for 5 Amp sockets on same board complete.
71
-
-
... More
All as per item No. 2.01 here-in-before but controlled by two way switches complete.
10
-
-
... More
All as per item No. 2.01 here-in-before but with 2.5 Sqmm (nominal cross sectional area) copper cable (for Phase and neutral) and 2.5 Sqmm one single core copper earth wire for 5/15 Amps independent switch socket point complete
94
-
-
... More
S&F modular switch 6 Amps, 1 module, single pole one way 230 V.
1353
-
-
... More
S&F modular switch 6 Amps, 1 module, single pole two way 230 V.
20
-
-
... More
S&F modular switch 16 Amps, 1 module, single pole one way 230 V.
94
-
-
... More
S&F modular socket 2 module, 2/3 pin 6 Amps.
321
-
-
... More
S&F modular socket 2 module, 2/3 pin 16 Amps.
94
-
-
... More
S&F modular white cover plate with frame 1 module.
10
-
-
... More
S&F modular white cover plate with frame 3 module.
415
-
-
... More
S&F modular white cover plate with frame 6 module.
174
-
-
... More
S&F modular white cover plate with frame 8 module.
86
-
-
... More
S&F modular metal flush box 1/2 module.
10
-
-
... More
S&F modular metal flush box 3 module.
292
-
-
... More
S&F modular metal flush box 6 module.
94
-
-
... More
S&F modular metal flush box 8 module.
44
-
-
... More
S&F ceiling rose surface mounted bakelite, 65X50mm having three terminals complete.
327
-
-
... More
M&L for provision of single pole and neutral metal clad enclosure with 2 pin and earth plug and socket complete with Double Pole MCB of capacity 20 Amps, 240V complete all as specified and as directed by Engineer-in-charge.
41
-
-
... More
M&L for provision of triple pole and earth metal clad enclosure with 3 pin and earth plug and socket complete with Triple Pole MCB of capacity 32 Amps, 415V complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
S&F Ceiling fan 230 V, 1200mm sweep with complete accessories (Energy Efficient 6BEE, five Star rated) including provision of suitable down rod, flexible cable suitable for 230 Volt, AC 50 Hz complete all as specified and as directed.
127
-
-
... More
S&F Fan regulator, dimmer polycorbonate, modular type suitable for 230 Volt, AC, 50 Hz complete all as specified and as directed.
127
-
-
... More
Supply and fix heavy duty exhaust fan of size 450 mm sweep, 1400 RPM, AC single phase 230V with louvers including connecting 3 core copper cable and PCC work complete all as specified and as directed by Engineer-in-charge.
40
-
-
... More
Supply and fix heavy duty exhaust fan of size 300 mm sweep, 1200 RPM, AC single phase 230V with louvers including connecting 3 core copper cable and PCC work complete all as specified and as directed by Engineer-in-charge.
20
-
-
... More
S&F Environmental friendly ultra modern, energy saving, surface mounted, decorative LED panel, PDC aluminium housing and high translucent frosted plastic, efficiency100Lumen/Watt,12 watt luminaire including 12 watt lamp complete all as specified and directed by Engr-in-Charge.. Make: Model No. LCDSPLN-R-12-CDL of Crompton or equivalent model of approved make.
35
-
-
... More
S&F 36 Watt LED 2'x2' Square light fitting of compact structure recess mounted Decorative glare less light, more than 120 lumen/watt including 36 watt lamp complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. LCTLRP-36-FO-CDL of Crompton or equivalent model of approved make.
377
-
-
... More
S&F 30 Watt LED light fitting of compact structure recess mounted Decorative efficiency100 Lumen/watt including 30 watt lamp complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. CCS-103-20-30-SL-DP-NWH of Crompton or equivalent model of approved make.
32
-
-
... More
S&F 36 Watt Square light fitting of compact structure recess mounted Decorative type 2'x2' efficiency 120 lumen/watt complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. LCTLRP-36-FO-CDL of Crompton or equivalent model of approved make.
53
-
-
... More
S&F 18 Watt 1'x1' fitting of compact structure recess mounted Decorative type, efficiency 100 lumen/watt complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. LCTLSNE-18-FO-CDL of Crompton or equivalent model of approved make.
240
-
-
... More
S&F 20 Watt and above LED tube light fitting of compact structure surface mounted Decorative type, efficiency 100 lumen/watt including 20 watt lamp complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. CCS-103-20-65-SL-DP-NWH of Crompton or equivalent model of approved make.
30
-
-
... More
S&F 1 x10 Watt and above LED Mirror tube light fitting of compact structure surface mounted Decorative type, efficiency 100 lumen/watt including 10 watt lamp complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. CCS-103-10-65-SL-DP-NWH of Crompton or equivalent model of approved make.
75
-
-
... More
Supply, installation testing and commissioning of Post Top Lantern 40 watt and above LED with Driver with all accessories as required for path way with all accessories IP-65 protection internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including light complete all as specified and as directed by Engr-in-Charge. Make: Model No. LPTO-40-WW of make Crompton or equivalent model of approved make.
8
-
-
... More
Supply and fixing LED 10 watts , LED 230 volts bollard integral decorative light Luminaries with opal acrylic diffuser with high Pressure Die Cast Housing and IP 65 protection complete with all accessories internally pre wired including 10watt LED lamp and connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-charge. Make: Model No. LBLTW-10 WW of make Crompton or equivalent model of approved make.
4
-
-
... More
Supply and fixing LED type, street light luminaries 30 W capacity with IP 66 comprising of pressure die cast housing with toughened glass cover in frame including complete accessories efficiency ≥ 110 lumen/watt, 40 mm GI pipe bracket, medium grade of length not less than 1.2 mtr bend to fix the light fitting, clamps, 20 mm PVC pipe to run the cable upto light fittings, nuts and bolts for fixing on wall/pole etc complete all as specified and directed by Engineer-in-Charge Make: Model No. LSTS-30-CDL-M of make Crompton or equivalent model of approved make.
12
-
-
... More
Supply and fixing LED type, spot light luminaries 6 W and above capacity with IP 66 comprising of epoxy powder coated HGS, enclosed with toughened glass cover in frame including complete accessories with 30,000 burning hours with CRI 80 beam angle 36 degree, vertical tilt 300 connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge Make: Model No. CDR-211-06-30-SL-NWH of make Crompton or equivalent model of approved make.
18
-
-
... More
Supply and fixing LED 70 watts and above, 230 volts Flood light Luminaries with high Pressure Die Cast aluminium housing and IP 66 protection complete with all accessories efficiency ≥125 lumen/watt including 10KV SPD and 70 Watt LED lamp and internally pre wired and connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-charge. Make: Model No. LFL-70-CDL/60-M of make Crompton or equivalent model of approved make.
2
-
-
... More
M&L for circuit/ sub main wiring with four runs of 10.0Sq.mm. nominal cross section area FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V along with two runs of 10.0Sq.mm. FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded through and including rigid PVC conduit of suitable dia and accessories, medium grade complete all as specified and as directed by the Engineer-in-Charge. Note:- Four runs of cable, two run of earth wire and one run of conduit shall be measured as one unit.
360
-
-
... More
M&L for circuit/ sub main wiring with two runs of 6.0Sq.mm. nominal cross section area FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V along with one run of 6.0Sq.mm. FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded through and including rigid PVC conduit of suitable dia and accessories, medium grade complete all as specified and as directed by the Engineer-in-Charge.
Note:-Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.
800
-
-
... More
M&L for circuit/ sub main wiring with two runs of 4.0Sq.mm. nominal cross section area FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V along with one run of 4.0Sq.mm. FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded through and including rigid PVC conduit of suitable dia and accessories, medium grade complete all as specified and as directed by the Engineer-in-Charge.
Note:-Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.
113
-
-
... More
M&L for circuit/ sub main wiring with two runs of 4.0Sq.mm. nominal cross section area FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V along with one run of 4.0Sq.mm. FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded through and drawn through existing conduit rigid PVC conduit of suitable dia and accessories, medium grade complete all as specified and as directed by the Engineer-in-Charge. Note :- Two runs of cable as specified, one run of earth wire and one run of conduit shall be measured as one unit.
687
-
-
... More
Fixing only of MCCB's Vetricle DB, TP 8 ways with IP 20 protection, double door, sheet steel phosphetised powder painted with 200 amps rated busbar 415V complete all as specified and directed by Engineer-in- charge. Note - Any minor items like srews and bolts and nut and washer may be included in rate quoted.
8
-
-
... More
Fixing only of MCB's DB, SPN 8 ways with IP 20 protection, double door, sheet steel phosphetised powder painted with 200 amps rated busbar 415V complete all as specified and directed by Engineer-in- charge. Note - Any minor items like srews and bolts and nut and washer shall be included in rate quoted.
14
-
-
... More
Fixing only of MCB's DB, TPN 4 ways with IP 20 protection, double door, sheet steel phosphetised powder painted with 200 amps rated busbar 415V complete all as specified and directed by Engineer-in- charge. Note - Any minor items like srews and bolts and nut and washer shall be included in rate quoted.
4
-
-
... More
Fixing only of MCCB 4 Pole 125 A, 25KA rupturing capacity with necessary connections complete all as specified and as directed by Engr-in-Charge
12
-
-
... More
Fixing only of MCB TPN 63A with necessary connecting up in MCB DB complete all as specified and as directed by Engr-in-Charge
12
-
-
... More
Fixing only MCB DP 6-32A with necessary connecting up in MCB DB complete all as specified and as directed by Engr-in-Charge
30
-
-
... More
Fixing only MCB SP 6-32A with necessary connecting up in MCB DB complete all as specified and as directed by Engr-in-Charge.
Note for item nos 2.42 to 2.48 :- MCCB/MCB shall be issued under schedule 'B' free for fixing only.
306
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I including excavation/earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC cover slab with suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 25mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire including testing complete all as specified and directed by Engineer-in-Charge.
Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.
20
-
-
... More
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4 mm dia.
10
-
-
... More
Supply install, test commissioning of sandwich busduct of 600A rating consisting of IP-54 degree protection outer enclosure of sheet metal galvanised steel 2mm thickness. The busbar conductor 5 Nos (3line + Neutral + functional earth) made out of aluminium alloy treated over the entire surface with 5 galvanic process of rating 600Amps incl all its connecting accessories like adopter box, bends, straight run feeder, flanged end, phase cross over expansion joint incl hanger suspension arrangement using MS channel support complete all as specified and directed by Engineer -in-Charge.
Note:- The rate must be including every type of connected accessories necessary as per the actual site condition like feeder element, distribution element with tap-off outlets, elbows, double elbows, special T, X elements fixing supports, expansion element, fire barriers connection interfaces, end feed unit, flexible braid connection etc complete as directed.
20
-
-
... More
Fixing only, install, test and commissioning of sandwich busduct of 600A rating consisting of IP-54 degree protection outer enclosure of sheet metal galvanised steel 2mm thickness. The busbar conductor 5 Nos (3line + Neutral + functional earth) made out of aluminium alloy treated over the entire surface with 5 galvanic process of rating 600Amps incl all its connecting accessories like adopter box, bends, straight run feeder, flanged end, phase cross over expansion joint incl hanger suspension arrangement using MS channel support complete all as specified and directed by Engineer -in-Charge.
Note:- (i)The rate must be including every type of connected accessories necessary as per the actual site condition like feeder element, distribution element with tap-off outlets, elbows, double elbows, special T, X elements fixing supports, expansion element, fire barriers connection interfaces, end feed unit, flexible braid connection etc complete as directed.
(ii) Schneider make Bus duct is available at site, which will be issued under Schedule 'B' free for fixing, new bus duct should be of same make with fittings as required at site.
80
-
-
... More
Supply and fix 40W LED, aesthetically designed 4'x1, LED panel ceiling light for surface mounting which provides soft-light and glare free symmetrical illumination with 40 watt LED lamp, 100 lumen/wattall specified and directed by Engr-in-Charge. Make: Model No. LCTLRNE-40-CDL(1'x4') of make Crompton or equivalent model of approved make.
19
-
-
... More
Supply and fix modular blank plate complete all as specified and directed by Engineer-in-Charge.
15
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - II
-
-
-
... More
SCHEDULE "A" PART - III [EXTERNAL ELECTRIFICATION]
-
-
-
... More
Supply and spreading river sand in trenches as cushioning to under ground cable on top and bottom of cable and levelling & ramming complete all as specified and directed by Engineer-in-charge.
Note:- Punned thickness will be measured.
11
-
-
... More
Supply and laying un-reinforced precast concrete cable cover, class Lv type-I size 250mm x 150mm x 40mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.
1100
-
-
... More
Fixing only including installation and testing and commissioning step down transformer, 11 KV on HT side and 415 volts on LT Side step down outdoor/indoor type oil cooled ONAN copper wounded complete with all standard accessories vector group DYN 11 suitable for continuous duty for operation on AC3 phase 50 Hz with on load tap changer (OLTC) on HT side in 7 steps with +/- 2.5% distribution transformer including RTCC Panel, transformer oil up to appropriate level all as per IS 1180 (Level-2) for capacity 500 KVA all standard accessories as per IS & manufacturer recommendation complete all as specified and directed by Engr-in-Charge Note:- (i) Necessary step down transformer will be supplied under schedule B free for fixing only.
(ii) Any minor items like srews and bolts and nut and washer may be included in rate quoted.
1
-
-
... More
Fixing only including install testing and commissioning of outdoor/ indoor type RMU with one incoming and two out going filled load bank switch suitable for 11 kV , 3 Phase, 630 A (3VCB) with rupturing capacity of 500MVA HT panel, copper bus bar PVC sleeved 50x 10 mm and suitable earthing strip in complete wiyh CTs and PTs of appropriate rating and accessories complete all as specified and directed by Engr-in-Charge Note:- (i) Necessary Indoor/Outdoor RMU will be supplied under schedule B free for fixing only.
(ii) Any minor items like srews and bolts and nut and washer may be included in rate quoted.
1
-
-
... More
Supply, installation, testing and commissioning of LT switch gear Panel double door, cubical type, indoor type mounted 3 phase 4 wire 50 cycles, 415 volts. The panel board shall be made of 2 mm thick CRCA sheet for load bearing members and 1.6 mm thick for doors/covers/ partitions and shall be factory powder coated on both sides. The panel shall be provided with separate compartment for each switch gear with hinged door. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with 800Amps rated high conductivity aluminium bus bars conforming ti IS-5082 (at the rating of 0.8 Amps / sqmm ) for phases and neutral supported with DMC/SMC barriers and colour coded with heat shrinkable sleeves pre-wired with copper cable. The degree of protection is IP-54 and certificate obtained from CPRI for manufacturing firm shall be produced. The panel shall accommodate complete with instrumentation such as Digital display ampere meter and volt meter, Phase indicating lamps CT's etc., for indicating incoming supply as 800A ACB/out going supply and M&L for of the following accessories:-
1
-
-
... More
Item No 3.05 Condt.........,
(Main Panel Board at Sub-Station):-
(a) MCCB FP, 415 V, 630 Amps, 50KA - 02 Nos (b) MCCB TP, 415 V, 200 Amps, 36KA - 01 No (c) MCCB TP, 415 V, 160 Amps, 36KA - 01 No (d) MCCB TP, 415 V, 100 Amps, 36KA - 03 Nos (e) MCB 63 A, 3 Pole, 10 KA - 01 Nos (f) MCB 32 A, 4 Pole, 10 KA - 01 Nos
(g) Change over switch 415V,630A,4 pole -1No (j) Digital ammeter suitable size with CT-1 set (with selector switch)
(k) Digital voltmeter - 1 No. (with selector switch) Note: The quoted rate deems to be inclusive of necessary PCC foundation and brick work required at site for installation of LT Panel board as directed.
-
-
-
... More
Supply and laying in trenches or ducts or passing through the pipe, testing and commissioning of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric LT power cable (heavy duty) with stranded aluminium conductor 1100 volts grade of size 3½ core 500 Sqmm suitable for earth system complete all as specified and as directed by Engr-in-Charge
120
-
-
... More
All as per item No. 3.06 here-in-before but 3½ core 240 Sqmm cable.
50
-
-
... More
All as per item No. 3.06 here-in-before but 3½ core 120 Sqmm cable.
50
-
-
... More
All as per item No. 3.06 here-in-before but 3½ core 95 Sqmm cable.
60
-
-
... More
All as per item No. 3.06 here-in-before but 4 core 16 Sqmm cable.
105
-
-
... More
Supply and laying in trenches or ducts or passing through the pipe, testing and commissioning of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric HT power cable earth system (heavy duty) with stranded aluminium conductor 11000 volts grade of size 3 core 120 Sqmm complete all as specified and as directed by Engr-in-Charge
50
-
-
... More
Supply and lay insulated mat of 1 mtr wide and 2 mtr length for electrical purpose, class `B', 2.5mm thick for upto 11KV as per IS-15652-2006 all as specified and directed by Engr-in-charge.
2
-
-
... More
Supply and fixing cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable or size 120 to 185 Sqmm complete all as specified and directed by Engr-in-Charge
6
-
-
... More
M&L for earthing complete with copper earth plate electrode 60cm X 60cm X 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth lead 20 x 3mm copper strip by means of bolts, nuts, check nuts and washers of brass all as shown in electrical plate No.3 of SSR Part-I including excavation/earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC cover slab with suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 40mm bore GI pipe medium grade for copper strip protection and 20 x 3mm copper strip including testing complete all as specified and directed by Engineer-in-Charge.
Note : Earth strip will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.
20
-
-
... More
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 20 x 3mm copper strip.
133
-
-
... More
S&F BRP402 mini green 43 W (3500 LUMENS) standalone dimmable solar street lights including 100WP panel 80AHx2 battery, 7 mtr tubular pole, metal battery box, with all accessories MPPT based charge controller with required civil works complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Fixing only including testing and commissioning of APFC Panel with Heavy duty gas filled capacitors and MCCB as incomer (Auto/ Manual option) with 150 (2x12.5+3x25+50) KVAR capacity with Thyristor switched standard with 7% detuned harmonics filter (Real-time PF Compensation) along with CT, APFC Controllers, indicating lamps and other connected accessories pre wired to connect with LT Panel all as specified and directed by Engineer-in-charge.
Note:- APFC panel will be supplied under schedule B free for fixing only.
1
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - III
-
-
-
... More
SCHEDULE "A" PART - IV [REFRIGERATION AND AIR CONDITIONING]
-
-
-
... More
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating with Green refrigerant of R-290/R-410A of capacity 1.5 TR complete all as specified and directed
27
-
-
... More
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating with Green refrigerant of R-290/R-410A of capacity 2 TR complete all as specified and directed
14
-
-
... More
Supply and fixing Voltage stabilizer with copper winding for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of+ 2.5% and of capacity 4 KVA complete all as specified and directed
27
-
-
... More
Supply and fixing Voltage stabilizer with copper winding for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of+ 2.5% and of capacity 5 KVA complete all as specified and directed
14
-
-
... More
Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having 120 Ltr/hr storage and nominal cooling capacity 60 Ltr/hr using green refrigerant R134A having 2 nos faucet complete all as specified and directed.
9
-
-
... More
Supply and fix fabricated mild steel sections as in cross arms, bracings, supports, lamps, walk ways; railings; framework of water tanks and similar works con- forming to Fe.290.Gde-E-165 and including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed inclusive of one Red oxide primer coat, one under coat and one finishing coat with synthetic enamel paint complete all as specified and directed.
50
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - IV
-
-
-
... More
SCHEDULE "A" PART - V [FIRE FIGHTING AND FIRE ALARM SYSTEM]
-
-
-
... More
M&L for MS ERW pipe 150mm nominal dia confirming IS : 3589:91 with accessories like sockets, spigots, joints etc complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to be inclusive of necessary fittings i.e flanges, bends and cutting, ewlding of MS ERW pipe with all connected accessories as per site requirement rubber gaskets, nuts, bolts and washers complete
24
-
-
... More
All as per item No. 5.01 here-in-before but 100mm nominal dia
50
-
-
... More
All as per item No. 5.01 here-in-before but 80mm nominal dia
30
-
-
... More
All as per item No. 5.01 here-in-before but 50mm nominal dia
12
-
-
... More
Supply and fixing of Sluice valve, flanged of class PN 1.6 of size 150 mm dia including steel spindle with head, iron wheel, gland with gland packing, etc and necessary fixing arrangement like rubber gasket etc., complete all as specified and as directed by Engineer-in-charge.
7
-
-
... More
All as per item No. 5.05 here-in-before but size 100mm dia
5
-
-
... More
All as per item No. 5.05 here-in-before but size 80mm dia
10
-
-
... More
Supply and fixing of butterfly valve of 80mm dia, construction of Body - CI, Disc –SS 316 Lining EPDM, class PN 1.0 including fittings and fixtures with suitable size neoprene rubber gasket, SS Nuts and bolts & 2 No’s of washers each bolts complete all as specified and directed.
1
-
-
... More
Supply and fixing of Non -Return valve as per IS 5312 of size 150mm dia, construction of Body - CI, Disc –SS 316 Lining EPDM including fittings and fixtures with suitable size neoprene rubber gasket, SS Nuts and bolts & 2 No’s of washers each bolts complete all as specified and directed.
2
-
-
... More
All as per item No. 5.09 here-in-before but size 100mm dia
1
-
-
... More
S & F 50mm dia, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
10
-
-
... More
All as per item No. 5.11 here-in-before but size 25mm dia
15
-
-
... More
Supply and fix Stainless Steel fire hydrant valve, type 'A' (single head outlet ) of 63 mm dia of size confirming to IS-9250 complete all as specified and as directed by Engineer-in-charge.
21
-
-
... More
M & L fire hose of synthetic fiber 15 mtrs, 63 mm dia as per IS:636 with IS mark including gunmetal coupling (male and female parts) with copper winding confirming to IS:903 complete all as specified and as directed by Engineer-in-charge.
21
-
-
... More
Supply and fix hose box made of 18 guage MS sheet 800mmx600mmx250mm with double door with 4mm thick glasses and door frame made of 16 guage MS sheet painted fire red out side and brilliant white inside yard for fixing 2 Nos of hose pipes of length 15 mtr each all as directed by Engr-in-charge
21
-
-
... More
S & F fire hydrants stand post 80mm Dia GI / MS both flanged type 1.5m Height with provision of single outlet confirming to IS-908 complete all as specified and as directed by Engineer-in-charge.
4
-
-
... More
S & F branch pipe gun metal 63 mm instantaneous inlet, made threaded outlet,15 mm bore nozzle short complete all as specified and as directed by Engineer-in-charge.
21
-
-
... More
M&L for Supply, Install, testing and commissioning of Pumping set split case, electrically driven, centrifugal type conforming to IS - 12469:1988 with CI casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for continuous operation with range of operation' 0% to 150% of rated capacity for 440V, 3 phase, 50Hz, 1440 RPM, 1620 LPM discharge, maximum working pressure 14.06 Kg/Cm2 with 70 Meter head and suitable copper cable for Star Delta connection from starter to motor, suction line from sump with foot valve-01 No, discharge line including all connected accessories and PCC foundation as per OEM Specification complete all as specified and directed
1
-
-
... More
M&L for Supply, Install, testing and commissioning of Pumping set diesel engine driven, horizontal end suction, centrifugal type conforming to IS - 12469:1988 with CI casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for continuous operation with range of operation' 0% to 150% of rated capacity for 440V, 3 phase, 50Hz, 70mtr head, 1800 RPM, 1620 LPM discharge and suction line from sump with foot valve-01 No, discharge line including all connected accessories and PCC foundation as per OEM Specification complete all as specified and directed
1
-
-
... More
M&L for Supply, Install, testing and commissioning of Jockey Pump horizontal end suction, centrifugal type conforming to IS - 12469:1988 with CI casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for continuous operation with nonover loading power characteristics for frequent start/stop operations for 440V, 3 phase, 50Hz, 90m head, 1450RPM, 900LPM discharge and suitable copper cable for Star Delta connection from starter to motor, suction line from sump with foot valve-01 No, discharge line including all connected accessories and PCC foundation as per OEM Specification complete all as specified and directed
1
-
-
... More
Supply and laying in trenches or ducts or passing through the pipe, testing and commissioning of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric LT power cable (heavy duty) suitable for earth system with stranded aluminium conductor 1100 volts grade of size 3½ core 35 Sqmm complete all as specified and as directed by Engr-in-Charge
150
-
-
... More
All as per item No. 5.21 here-in-before but 3½ core 25 Sqmm cable.
40
-
-
... More
Supply, installation, testing and commissioning of LT Panel double door, cubical type, floor, indoor type, mounted 3 phase 4 wire 50 cycles, 415 volts. The panel board shall be made of 2 mm thick CRCA sheet for load bearing members and 1.6 mm thick for doors/covers/ partitions and shall be factory powder coated on both sides. The panel shall be provided with separate compartment for each switch gear with hinged door. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with 300Amps rated high conductivity aluminium bus bars conforming ti IS-5082 for phases and neutral supported with DMC/SMC barriers and colour coaded with heat shrinkable sleeves pre-wired with copper cable. The degree of protection is IP-54 and certificate obtained from CPRI for manufacturing firm shall be produced The panel shall be accommodate complete with instrumentation such as Digital display amphere meter and volt meter, Phase indicating lamps CT's etc., for indicating incoming supply/ out going supply and M&L for omprising of the following:-accessories:-
1
-
-
... More
Item no 5.23 contd.........,
(a) MCCB 4 pole, 415 volts, 200 Amps, 35KA - 01 No (b) MCCB 3 pole, 415 volts, 125 Amps, 25KA - 01 No
(c) MCCB 3 pole, 415 volts, 63 Amps, 10KA - 02 Nos
(d) Star Delta starter suitable for main pump (ref Ser Item No 5.18) - 01 No
(e) Star Delta starter suitable for Jockey Pump (ref Ser Item No 5.20) - 01 No (f) Digital Ammeter along with CT's - 03 Nos (g) Digital voltmeter - 01 No (h) Single phase preventer - 3 Nos
(j) Window type announicator with 08 windows - 01 No
(k) Auto/manual selector switch with indication lamps. (l) MCB TPN 32 Amps - 02 Nos.
Note: The quoted rate deems to be inclusive of necessary PCC foundation and brick work required at site for installation of LT Panel board as directed.
-
-
-
... More
Supply and fixing presuure guage 8 inch dial 0-14 Kgs rating at the delivery side of pump sets complete tubing, fitted with stop cock etc.,complete all as specified and as directed by the Engineer-in-Charge.
4
-
-
... More
Supply and fixing Pressure switch universal type with necessary mounting/ connection with control wiring with conductor and mechanical connection to operate at pressure range of 0 to 10 Kg/Sq.cm for automation complete all as specified and as directed by the Engineer-in-Charge.
4
-
-
... More
S & F Microprocessor based intelligent networking type fire alarm panel with 4 x 20 Alpha numeric LCD display complying with IS 2189/ NFPA 72, Event logging and printing facility, Real time clock & RS-485 port to connect repeater panel via 4 wires, Keyboard programming with password locking. Provision of RS-232 for LAN connection including provision of connecting Fire Fighting equipments as required to areas complete all as specified and as directed by Engineer-in-charge.
8
-
-
... More
S & F Intelligent networking type master control panel with4 x 20 Alpha numeric LCD display complying with IS 2189/ NFPA 72, Event logging and printing facility, Real time clock & RS-485 port to connect repeater panel via 4 wires. Keyboard programming with password locking. Provision of RS-232 for LAN connection for PC connectivity & Auto dialer at extra cost complete all as specified and as directed by Engineer-in-charge.
2
-
-
... More
S&F Ionization smoke sensor detectors/Photo electric smoke detectors/ Laser type smoke detectors/Heat detectors and IR/UV/Flame detectors as required, and to be installed as per IS: 11360 & UL 268 Specifications complete all as specified and as directed by Engineer-in-charge.
130
-
-
... More
S&F Addressable control modules along with required based and junction boxes complete as required and specified as per Bn - 54 for fire protection signalling system complete all as specified and as directed by Engineer-in-charge.
32
-
-
... More
S&F Addressable monitor modules along with required base and junction boxes complete as required and specified as per BN - 54 for fire protection signalling system complete all as specified and as directed by Engineer-in-charge.
21
-
-
... More
Supply & fix of the horizontal double mounting type 24V DC driven 1/2 HP siren with 3.25 Kms audible range with 6000 RPM Auto reset facility to be provided with time lag complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
S&F Addressable/resettable type manual call points with push button and LED complete all as specified and as directed by Engineer-in-charge.
20
-
-
... More
S & F 24 Volts DC Electronic hooters with multi tone customer selectable with xenon flasher in ABS or Mild steel enclosure. Output 86dB, Current 450 mA complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
S & F 2 core x 1.5 sqmm copper armoured cable nominal cross section area FRLS PVC insulated unsheathed cable with copper conductor, multi stranded 1100 V as per IS: 1554 including wall mounting/ceiling mounting with saddles clamps screws junction boxes and required conduits with necessary earthing etc complete all as specified and as directed by Engineer-in-charge.
600
-
-
... More
S & F Microprocessor based Spencer make sprinkler control panel along with the facility to integrate with fire alarm control panel and auto start mechanism of firer water pump house with audio visual indications complete all as specified and as directed by Engineer-in-charge. a) Water release module : Auto/Manual release mode
b) Auto with built in timer (settable) & emergency manual over ride switch
8
-
-
... More
S & F 57⁰ C QBD complete with following required fittings complete all as specified and as directed by Engineer-in-charge:
a) Material of Construction High Tensile Brass Foreging.
b) Heat Sensitive Bulb : Quartzoid (Dia 8 mm).
c) Deflector : Brass to IS : 319
d) Test Pressure : 30 kgs/cm² e) Working Pressure : 12.4 kgs/cm² Max
f) Bulb Temp, Range and Colour ; 57 deg,C/135 deg,F, Orange
g) Finish : Brass/Nickel & Chrome plated
h) Net Weight : 0.800 kgs
j) QBD 57⁰ C
240
-
-
... More
S & F Deluge valve/Alarm valve of 80 mm dia with auto resetting Deluge valve model-A, for Vertical inlet to Horizontal outlet mounting, Cast iron material flanged end to ANSI B16.1, Class 125, Size 80 NB UL listed complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
S & F Alarm test valve with suitable drain collection complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply and laying/ fixing 2 Core 1.5 Sq.mm nominal cross section area Cu Ar Cables, multi stranded 1100 V complete all as specified and as directed by Engineer-in-charge.
200
-
-
... More
S & F Flow switch with required fittings WFD35 3.5" 10 through 40 450 PSI NEMA 4 UL, FM, CSFM, MEA, CNTC complete all as specified and as directed by Engineer-in-charge.
16
-
-
... More
Supply and fix Galvanised steel water tubing 100 mm dia medium grade conforming to IS:1239 (Part I) including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors or in trenches and clamping including testing complete all as specified and as directed by the Engineer-in-charge.
300
-
-
... More
All as per item No. 5.41 here-in-before but 80mm dia
30
-
-
... More
All as per item No. 5.41 here-in-before but 50mm dia
320
-
-
... More
All as per item No. 5.41 here-in-before but 25mm dia
350
-
-
... More
M&L for Mild steel tubular works for supporting pipes, bracings, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed inclusive of one Red oxide primer coat, one under coat and one finishing coat with synthetic enamel paint complete all as specified and directed.
100
-
-
... More
Supply, installation, testing and commissioning of 150mm dia 4 way fire brigade inlet with isolation valve with instantaneous SS couplings, 63mm dia with required fittings all as specified and directed.
2
-
-
... More
Supply, lay in trenches, ducts, connect, test and commissioning Ductile Iron pressure pipe with double flanged and confirming to IS-8329 : 2000 in standard maximum lengths, class K-9, flange rating PN-10, pipes lining inside with cement mortar (CML) outside with bituminous coating as per Annx `C' of IS-8329 of 150mm size including fittings complete all as specified and directed by Engr-in-charge.
Note : Necessary earth work will be measured and paid separately
200
-
-
... More
Supply and fix cast iron foot valve of 150mm dia conforming to relevant IS with nut-bolts etc all as directed.
2
-
-
... More
Supply and fixing DI pipe fittings (Tee, reducer, y joints etc) upto 250mm dia including accessories all as specified and directed by Engr-in-Charge
300
-
-
... More
Supply and fix centrifugal pumpset, electric driven, AC, 3 ph, 415 Volts, 50 Hz of capacity having discharge 450 LPM at 40M head with suitable starter panel, cable and connected accessories gate valve, strainer NRV including PCC foundation complete all as specified and as dierected by Engr-in-Charge..
1
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - V
-
-
-
... More
SCHEDULE "A" PART - VI [LIGHTINING PROTECTION]
-
-
-
... More
M & L for Aluminium strip 25 x 3 mm with saddles and fixing screws etc for roof or on wall conductors and down conductors above/ under ground including porcelain insulators complete all as specified and directed by Engr-in-Charge
400
-
-
... More
Supply and fixing Air termination, single pointed, aluminium rod 12 mm dia and 300 mm long complete all as specified and directed by Engr-in-Charge
6
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 32 x 6mm strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I including excavation/earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC cover slab with suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 40mm bore GI pipe medium grade for GI strip protection and 32 x 6mm earth strip including testing complete all as specified and directed by Engineer-in-Charge.
Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.
9
-
-
... More
Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex head screw including terminal box of suitable size complete all as specified and directed by Engr-in-Charge
6
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - VI
-
-
-
... More
SCHEDULE "A" PART - VII [LIFT]
-
-
-
... More
Design, Supply, install, testing & commissioning Passenger lift of 884 Kgs (13 person), speed 1.5 metre/Sec motor, 415 volts, 3 phase AC 50 Hz supply, conforming to IS-14665 and as amended, suitable to serve G+6 floors (total rising height 28Mtrs or as per architectural drawing), 8 stops with (all opening on the same side) by providing Guide rail for both (Car & counter weight) with AC variable Voltage & Variable Frequency Drive (VVVF drive ) control panel complete with all standard accessories, simplex automatic & manual dual controlled operation with / without attendant, Collapsible gate, automatic rescue device (ARD) system, emergency light, emergency alarm , Axial flow fan, illuminated button with LCD display for position and direction indicator for COP and Push Button with LCD display at Ground Floor and all upper landings (LPB) and necessary counter weights and necessary copper cable of suitable size and core for inter connection from lift to control panel etc, suitable size of rope for main car & counter weight, OSG etc complete including necessary ISMB for installation of lift gear & motor & civil work for preparation of lift pit of suitable size for fixing buffer spring all as specified and directed.
2
-
-
... More
Item No 7.01..........,Contd
Detail Specification :-
(a) Cabin : SS Cabin
(b) Car operating panel : Stainless steel, Digital position indicator Emergency stop/ Emergency alarm, Auto/Attn Key
(c) Ceiling : False ceiling fiber glass, pressure fan/Blower, floor lighting
(d) Flooring : Tiles/Aluminium Chequered plate.
(e) Well size : 2250 mm x 1700 mm
(f) Car size : As per latest IS and suitable for lift well size.
(g) Car opening : As per latest IS and suitable for lift well size.
-
-
-
... More
Design, Supply, install, testing & commissioning Passenger lift of 884 Kgs (13 person), speed 1.5 metre/Sec motor, 415 volts, 3 phase AC 50 Hz supply, conforming to IS-14665 and as amended, suitable to serve G+6 floors (total rising height 28Mtrs or as per architectural drawing), 8 stops with (all opening on the same side) by providing Guide rail for both (Car & counter weight) with AC variable Voltage & Variable Frequency Drive (VVVF drive ) control panel complete with all standard accessories, simplex automatic & manual dual controlled operation with / without attendant, Collapsible gate, automatic rescue device (ARD) system, emergency light, emergency alarm , Axial flow fan, illuminated button with LCD display for position and direction indicator for COP and Push Button with LCD display at Ground Floor and all upper landings (LPB) and necessary counter weights and necessary copper cable of suitable size and core for inter connection from lift to control panel etc, suitable size of rope for main car & counter weight, OSG etc complete including necessary ISMB for installation of lift gear & motor & civil work for preparation of lift pit of suitable size for fixing buffer spring all as specified and directed.
1
-
-
... More
Item No 7.02..........,Contd
Detail Specification :-
(a) Cabin : SS Cabin
(b) Car operating panel : Stainless steel, Digital position indicator Emergency stop/ Emergency alarm, Auto/Attn Key
(c) Ceiling : False ceiling fiber glass, pressure fan/Blower, floor lighting
(d) Flooring : Tiles/Aluminium Chequered plate.
(e) Well size : 2400 mm x 1900 mm
(f) Car size : As per latest IS and suitable for lift well size.
(g) Car opening : As per latest IS and suitable for lift well size.
-
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - VII
-
-
-
... More
SCHEDULE "A" PART - VIII [DG SET]
-
-
-
... More
Supply, Install, test and commissioning of 3Phase, Neutral AC, 320KVA, 415V, Silent engine Diesel generating set of 1500 RPM and specification of alternator confirming to IS 13364. including AMF panel and connected control devices such as rely ,ammeter, voltmeters, contactors for AMF operations, CPCB approved complete with a Acoustic enclosure of suitable size for the DG set to reduce the noise level to the tune of 75db at a distance of 1 mtr from the enclosure, Silencer pipe protected with asbestors rope independently supported from Engine to out side as per OEM recommendations, AVM pads, PCC foundation as per OEM design ( one meter clear working space with PCC ( 1:4:8 around DG set is essential), cold starting kit, battery start, suitable cable for connecting from DG set to AMF panel, radiator cooled Diesel Engine drivers, coupled to alternator mounted on MS channels, iron base frame, including suitable batteries. Prime mover: Vertical Diesel Engine of suitable capacity Water cooled/ Air cooled/ Oil cooled ( Radiated mounted) as per IS 10002/1002 direct injection type turbo charge electric starting system having rated speed 1500 RPM. The DG set shall be capable of running 24 Hrs continuously with 10% overloading for one hour in every 12 Hr. Engine shall be equipped with all standard fittings as per OEM recommendations and common base frame with following:
(a) Electronic/ Microprocessor based governor
(b) Lubrication oil pressure guage
(c) Oil temperature guage
(d) Water temperature guage
(e) Lubricating oil (f) RPM Cum Hrs meter
1
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - VIII
-
-
-
... More
SCHEDULE "A" PART - IX [EXTERNAL WATER SUPPLY]
-
-
-
... More
Supply, install, testing and commissioning of pumping sets, centrifugal type, electric driven, 3 phase 415V 50 hz of capacity 5HP, 45 Meter head including suitable cable from starter to motor suction and discharge pipe and connected accessories including PCC foundation in all respect complete all as specified and directed by Engr-in-charge.
2
-
-
... More
Supply, installation, testing and commissioning of LT Panel double door, cubical type floor indoor type mounted 3 phase 4 wire 50 cycles, 415 volts. The panel board shall be made of 2 mm thick CRCA sheet for load bearing members and 1.6 mm thick for doors/covers/ partitions and shall be factory powder coated on both sides. The panel shall be provided with separate compartment for each switch gear with hinged door. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with 300Amps rated high conductivity aluminium bus bars conforming ti IS-5082 for phases and neutral supported with DMC/SMC barriers and colour coaded with heat shrinkable sleeves pre-wired with copper cable. The degree of protection is IP-54 and certificate obtained from CPRI for manufacturing firm shall be produced The panel shall be accommodate complete with instrumentation such as Digital display amphere meter and volt meter, Phase indicating lamps CT's etc., for indicating incoming supply/ out going supply and comprising of the following:-
1
-
-
... More
(a) MCCB 4 pole 63 Amps 16 KA - 01 No (for I/C)
(b) MCCB 3 pole 32 Amps 16 KA - 04 No (c) Starter suitable for 5 HP, 3 ph mono block/ centrifugal pump - 02 nos.
(d) Mini Motor protection relay 8-22 Amps - 02 Nos
(e) MCB SP 6-32A, 230V - 3Nos. (f) Single phase preventer - 2 Nos. (g) Digital Ammeter along with CT's - 03 Nos (h) Digital voltmeter - 01 No (j) Indication lamp LED type (R,Y,B) - 1set
Note: The quoted rate deems to be inclusive of necessary PCC foundation and brick work required at site for installation of LT Panel board as directed.
-
-
-
... More
Material and labour for cutting existing CI/DI pipe line of sizes 250 mm and inserting CI/DI tees 250x250x100 mm dia both end spigot socket and other side flanged in ground/walls floor etc including testing complete all as specified and as directed by the Engineer-in-charge.
1
-
-
... More
Supply and fix Galvanised steel water tubing 40 mm dia medium grade conforming to IS:1239 (Part I) including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors or in trenches and clamping including testing complete all as specified and as directed by the Engineer-in-charge.
120
-
-
... More
S & F 65mm dia, Gun-metal, foot valve confirming to IS 9338, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
2
-
-
... More
S & F 40 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
4
-
-
... More
All as per item No. 9.06 here-in-before but 25mm dia
4
-
-
... More
M&L for valve chamber including excavation in any type of soil, spreading, levelling and refilling etc. PCC (1:4:8) type D2 for foundation, brick work of one brick thick wall in CM (1:4) including internal plaster 15mm thick in CM (1:4) external plaster 15mm thick(1:4) and providing coping in PCC (1;2:4) type B1, angular iron frame of size 50x50x6mm with 6mm thick MS plate cover complete including locking arrangements and having FRP coating of 2mm thick on both inside and outside surfaces complete as specified for the size of chamber 1200mm x 900mm x 1200mm complete all as specified and directed
1
-
-
... More
SUB TOTAL OF SCHEDULE "A" Part - IX
-
-
-
... More
Total in Figures
-
-
-
... More
Quoted Amount in Words
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements