Military Engineer Services Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Feb 2025
Closing Soon15 Mar 2025
Tender Amount₹ 1,44,00,000
Costs
EMD
₹ 2,19,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_694438_1Tender No
82525/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness including removing debris outside MD land as directed Engineer-in-Charge
2
-
-
... More
M & L for 25mm thick (average), PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in levelling course for sub base of flooring complete all as specified and as directed.
950
-
-
... More
M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
800
-
-
... More
M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
100
-
-
... More
M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 including dismantling existing tiles complete all as specified and directed.
50
-
-
... More
M & L for coloured Glazed ceramic tiles of size 450x350x7mm/350x250x7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing tiles complete all as specified and directed. [Note: Rate quoted is deemed to include for cutting for offsets etc]
720
-
-
... More
M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, sunken floor filling and mass concrete including demolition of old concrete complete all as specified.
33.7
-
-
... More
M & L for preparing surfaces of sunken floor and providing a coat of brush bond RFX of Fosroc chemicals or equivalent and applying chemical injection treatment in the form of Pressure crouting by drilling 20mm dia holes, 60mm deep @ 100cm grid at bottom floor and all the internal wall surfaces of sunken slabs of toilet by injecting cement slurry mixed with grout admixture 'Conbextra EP 10' of Fosroc or its equivalent complete all as per manufacturers instructions
122
-
-
... More
M & L for rendering 15mm thick in CM 1:3 on concrete surfaces mixed with and including water proofing compound finished even and smooth with out using extra cement complete all as specified and directed.
122
-
-
... More
Demolition of reinforced concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for including removing debris outside MD land as directed by the Engineer-in-Charge.
11.2
-
-
... More
M & L for RCC 1:11:2:3, type A-1 using 20mm graded stone aggregate as in Chajjas, Guttters/ Facias & Fins etc. complete all as specified and as directed.
7
-
-
... More
Use and removal of steel formwork to chajjas, fins, Facia, louvers including fair finished surfaces complete all as specified and directed.
70
-
-
... More
M & L for RCC 1:11:2:3, type A-1 using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves and the like complete all as specified and as directed.
2
-
-
... More
Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.
20
-
-
... More
M & L for RCC 1:11:2:3, type A-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and as directed.
3.65
-
-
... More
Use and removal of steel formwork to sides and soffits of floor or roof beams, beam launchings, lintels, cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and as directed.
43.2
-
-
... More
M & L for High Strength Corrosion Resistant Deformed TMT Bars of 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
650
-
-
... More
M & L for High Strength Corrosion Resistant Deformed TMT Bars of 8mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
510
-
-
... More
M & L for High Strength Corrosion Resistant Deformed TMT Bars of 8mm dia and over, as in stirrups, spacers, binders including hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
20
-
-
... More
M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition of old brick work complete all as specified and directed.
17.88
-
-
... More
M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks including demolition of old brick work complete all as specified and directed.
13.5
-
-
... More
Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.
1570
-
-
... More
M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.
478
-
-
... More
M & L for rendering in two layers comprises of 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished with 5mm thick in CM 1:4 duly mixed with and including cement water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed.
835.92
-
-
... More
M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces, finished even and smooth with out using extra cement complete all as specified and directed.
360
-
-
... More
S & F in repairs Sink with drainage board made of stainless steel 1 mm thick (SS-304) kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all specified and directed
16
-
-
... More
S & F in repairs Stainless steel kitchen plate rack of size 600x900x250mm made of 1.5mm thick stainless steel sheet complete all as directed
16
-
-
... More
M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directetd.
88.4
-
-
... More
M & L for preparation of old decorated surfaces of walls by brooming down, brushing and applying one coat of white wash complete all as spcified and directed.
100
-
-
... More
M & L for complete removal of existing treatment of ceiling and applying two coats of acrylic emulsion over a coat of alkali resistant primer complete all as specified and directed.
250
-
-
... More
M & L for preparation of newly plastered surfaces of ceiling and applying two coats of acrylic emulsion over a coat of alkali resistant primer complete all as specified and directed.
310
-
-
... More
M & L for preparation of newly plastered surfaces of wall and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of primer over and including suitable thickness wall care putty for making good undulations to obtain smooth surface complete all as specified and directed.
478
-
-
... More
M & L for complete removal of existing treatment on wall surfaces and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of primer over and including suitable thickness wall care putty for making good undulations to obtain smooth surface complete all as specified and directed.
2200
-
-
... More
M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as directed.
83
-
-
... More
M & L for preparation of old decorated surfaces of walls / ceiling, removing plants grown on the surfaces of building with roots of any height and girth and applying chemical treatment to prevent further growth and making good the disturbed surfaces in CM 1:4 to match with existing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including suitable thickness wall care putty for making good undulations to obtain smooth surface including complete all as directed
1450
-
-
... More
M & L for preparation of new surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including suitable thickness wall care putty for making good undulations to obtain smooth surfacecomplete all as directed
732
-
-
... More
M & L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified
32
-
-
... More
S & F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling including taking down old CI pipes complete all as specified and directed.
160.8
-
-
... More
S & F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in floors including taking down old CI pipes complete all as specified and directed.
32
-
-
... More
S & F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling including taking down old CI pipes complete all as specified and directed.
53.6
-
-
... More
S & F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in floors including taking down old CI pipes complete all as specified and directed.
32
-
-
... More
S & F 75mm dia PVC floor trap plain with grating including jointing with solvent cement of outlet complete all as directed
64
-
-
... More
M & L for 110mm bore PVC (SWR) bends any radius with access door complete all as specified.
24
-
-
... More
M & L for 75mm bore PVC (SWR) bends any radius with access door complete all as specified.
8
-
-
... More
M & L for 110mm bore PVC (SWR) bends any radius complete all as specified.
8
-
-
... More
M & L for 75mm bore PVC (SWR) bends any radius complete all as specified.
32
-
-
... More
M & L for 110mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal of any radius complete all as specified.
8
-
-
... More
M & L for 75mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal of any radius complete all as specified.
8
-
-
... More
M & L for 110mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal with access door complete all as specified.
8
-
-
... More
M & L for 75mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal with access door complete all as specified.
8
-
-
... More
M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.
36
-
-
... More
M & L for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.
12
-
-
... More
Supplying and fixing of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 15/20mm dia complete all as specified and directed.
202.4
-
-
... More
Supplying and fixing of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 25/32mm dia complete all as specified and directed.
152.4
-
-
... More
Supplying and fixing of 40mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 40mm dia complete all as specified and directed.
42
-
-
... More
Supplying and fixing of 50mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 50mm dia complete all as specified and directed.
8
-
-
... More
S & F in repairs 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.
64
-
-
... More
S & F in repairs Wall mixer, 15mm dia, Single Lever cast copper alloy, chromium plated Hot and Cold with provision for connection to Overhead Shower complete with 115mm long bend pipe, connecting legs & wall flange [excluding hand & overhead shower] complete all as directed. [make shall be Jaquar Catalogue No. SOL-6273UPR or its equivalent]
16
-
-
... More
S & F in repairs Angular stop cock with Flange, fancy type complete all as directed. [Make shall be Jaquar of Cat No. KUP-35053PM or its equivalent]
64
-
-
... More
S & F Brass Chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union complete all as directed
16
-
-
... More
S & F in repairs gun metal, globe or gate valves, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
16
-
-
... More
S & F in repairs gun metal, globe or gate valves, 50mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
2
-
-
... More
S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, triple layered, hoisted and fixed in position including 20mm dia PTMT ball valve including taking down old tank complete all as specified and directed.
16
-
-
... More
S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed.
32
-
-
... More
S & F Stainless steel soap dish embedded in wall complete all as directed
16
-
-
... More
S & F in repairs Stainless steel Towel Ring square with round flange complete all as directed. [Make shall be Jaquar of Cat No. ACN-1121N or its equivalent]
16
-
-
... More
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as directed
16
-
-
... More
S & F in repairs bevelled edge looking mirror of selected quality glass, of size 600 x 450 x 5.5mm thick mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium beading alround complete all as specified and directed.
16
-
-
... More
S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern] of size 560x440x395mm or nearest size, White, including flush pipe of polyethylene of low or high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including low PVC level flushing cistern 10 lit capacity complete all as specified and as directed.
16
-
-
... More
S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550mm X 400mm including Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed.
16
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
160
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed.
80
-
-
... More
S & F factory made single rebated Wood Polymer Composite [WPC] solid door/ window / ceosetory windows & other Frames/ Chowkhats of size 65mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. [Note: The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BoQ]
230.4
-
-
... More
S & F factory made single rebated Wood Polymer Composite [WPC] solid door/ window / ceosetory windows & other Frames/ Chowkhats of size 65mm x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. [Note: The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BoQ]
160
-
-
... More
S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately)
64
-
-
... More
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, fixed partitions with one or more rebates including joining cleat for fixing etc. complete all as specified
1070
-
-
... More
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for window and ventilator shutters, side hung type without sash bars, aluminium sections of weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
120
-
-
... More
M & L for 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides with 4mm thick decorative veneered plywood grade 1 (with BWR resin) with decorative face veneer on one face, fixed with screws to timber frame work including veneer polishing complete all as specified and directed.
28.8
-
-
... More
S & F 35mm thick, factory made Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I and fitted to Chowkats complete all as specified and as directed.
35
-
-
... More
M & L for 2nd class hardwood 35mm thick Factory made, plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as specified and directed.
35
-
-
... More
M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified
1
-
-
... More
M & L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in cast in lintels upto 1.5m span, copings, bed blocks for hold fasts, bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.
4.2
-
-
... More
S & F mild steel work as in Bands, straps, hold fasts, stiffners for fencing posts, struts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
100
-
-
... More
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned stacks or stainless steel wire staples complete all as specified and directed.
50
-
-
... More
S & F 5.0mm thick sheet glass, ordinary quality fixed to aluminium windows in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.
79
-
-
... More
S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed.
114
-
-
... More
S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.
150
-
-
... More
S & F Stainless steel Butt hinges, 125mm size with galvanised mild steel hinge pin complete all as specified and directed.
150
-
-
... More
S & F Stainless steel Butt hinges, 100mm size with galvanised mild steel hinge pin complete all as specified and directed.
96
-
-
... More
S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed.
120
-
-
... More
S & F extruded aluminium alloy handles fabricated type anodised of size 100mm complete all as directed.
64
-
-
... More
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
200
-
-
... More
S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned stacks or stainless steel wire staples complete all as specified and directed.
5
-
-
... More
S & F floor door stopper of aluminium body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed.
112
-
-
... More
S & F stainless steelcurtain rail 25mm dia including fixing with suitable SS brackets, fancy type designer knobs matching with curtain rod complete all as specified. [Note: Quoted rate is inclusive for providing additional bracket if length of curtain rail exceeds 1.2m long]
150
-
-
... More
S & F 18mm thick Plywood, grade BWR, type BB, fixed with fevicol and nails for working table / storage almirahs fixed to timber frame work including dismantling old cub board shutters complete all as specified
150
-
-
... More
S & F 0.9mm thick decorative laminate type-1 of surface finish, colour and pattern as approved fixed with approved adhesive complete all as directed
175
-
-
... More
S & F 2nd class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area not exc 3 Sqcm complete all as directed
307
-
-
... More
S & F Stainless steel Butt hinges, 75mm size with stainless steel pin type D-11 complete all as specified and directed.
128
-
-
... More
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 40mm (when open)
243
-
-
... More
S & F brass Hat and coat hooks, solid body, 175mm to 250 mm size complete all as directed
32
-
-
... More
S & F brass cup board lock 75mm size 4 levers with duplicate keys
32
-
-
... More
S & F extruded brass handle fabricated type 100mm size
64
-
-
... More
S & F extruded brass handle fabricated type 150mm size
128
-
-
... More
S & F Magnetic catch for shutters
192
-
-
... More
S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as directed
32
-
-
... More
S & F Mortice night latch, of size 82mm, 7 levers zink based die cast alloy body and two keys complete all as specified and directed
16
-
-
... More
M & L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at 2.25 litres per linear running metre including drilling and plugging holes with cement mortar (1:2) to match with the existing surface complete all as specified and directed by Engineer-in-Charge.
175
-
-
... More
M & L for providing and injecting emulsion for post construction anti-termite treatment under existing floors using emulsion CHLOROPHYRIFOS 20 EC at 1% concentration at the rate of one litre per each hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floor complete all as specified and directed by Engineer-in-Charge.
150
-
-
... More
M & L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work by chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at the rate of 0.5 litre per each hole by drilling 6mm dia holes at a downward angle of 45 Degree at 150mm centre to centre complete all as specified and directed by Engineer-in-Charge.
600
-
-
... More
S & F 2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as directed
20
-
-
... More
S & F Stainless steel Butt hinges, 50mm size with galvanised mild steel hinge pin complete all as specified and directed.
20
-
-
... More
S & F Glass shelf of size 450mmx150mm with chromium plated support brackets fixed near wash basin as directed by Engineer-in-Charge
16
-
-
... More
S & F PVC half round corner beading not exc 15mm girth fixed to tile junctions as directed by Engineer-in-Charge
640
-
-
... More
S & F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m Long flexible tube and ABS wall hook including making connections and fixed in position complete all as directed.
16
-
-
... More
S & F fancy type Chromium plated two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule with flanges complete all as specified and directed. [Make shall be Jaquar of Cat Part No. KUP-35041PM or its equivalent]
16
-
-
... More
S & F anodised aluminium grill (anodised transperant or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern with approved standard section and fixed to the existing window frame with CP brass / stainless ateel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as directed by the Engineer-in-Charge.
150
-
-
... More
M & L for drilling hole of 10mm dia and cleaning the holes in position with all equipment, putty and installation of non returnable packer 8mm dia epoxy grout as per manufacturers instructions complete all as directed
75
-
-
... More
M& L for drilling and fixing PVC nozzles and injecting epoxy cementitious polymeric grout in case it is noticed that the beams, columns or slab elements have honeycombing inside after removal of loose concrete material, it si necessary to inject POLYMER MODIFIED CEMENT GROUT in the honeycombed areas complete all as directed
100
-
-
... More
M & L for cleaning of all exposed reinfocement bars (new & old) alround and applying a single coat of Alkaline rust converting primer on allround the bars and applying two coats of Epoxy phenolic anti-corrosive protective coat on bars alround new & old as recommended by the manufacturer complete all as directed. [Note: Anti corrisive treatment shall be continuous especially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating. Area of reinforcement for which rust proof / anti corrosive treatment is applied is measured]
45
-
-
... More
M & L for surface prepartion on concrete shall be free from dust, loose materials, surface contamination and materials which reduce bond or prevent suction or wettting by repair materials. Delaminated, weak, damaged and deteriorated concrete adhere necessary sound concrete shall be removed by suitable means. Substrate shall be saturated surface dry (SSD) with no standing water. Rusting, scales, motor concrete, dust and other loose materials on Steel reinforcement shall be removed by blast cleaning or other means of mechanical abrasion and the reinforcement shall be fully exposed and then apply a cement based epoxymodified three-component anti corrosive coating and bonding for rebar corrosion protection system complete all as directed
125
-
-
... More
M & L for providing the Polymer modified cementitious mortar [PMM] as specified below:-
[a] Dry the substrate surface and clean it free of debris and dust.
[b] Apply epoxy bond coat on the sound sub strate using approved spary machine & ensuring that no pin holes are visible (in case pin hole are still visible, a second coat shall be applied to ensure absence of pin holes.
[c] Immediately after application of epoxy bond coat as above apply Polymer modified cementitious mortar [PMM] of 40mm thickness. Application of PMM shall be preferably be in coats of approximately 10mm thickness.
[d] PMM work shall be executed in fairly rapid successions so as entire work is completed within 30 minutes.
[e] PMM surface to be moist cured for three days followed by air cutting in temperature as recommended by manufacturers.
150
-
-
... More
M & L for providing Micro concreting M-40 grade as specified below:-
[a] Dry the substrate surface and clean it free of debris and dust.
[b] Apply epoxy bond coat on the sound sub strate using approved spary machine & ensuring that no pin holes are visible (in case pin hole are still visible, a second coat shall be applied to ensure absence of pin holes.
[c] Immediately after application of epoxy bond coat as above, pour Micro concrete M-40 grade using approved mixing machines / pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns, etc. Adding of aggregates will be permitted only as per manufacturers recommendations without compromising the strength. Note: Quoted rate deemed to include for cost of form work as required at site
4
-
-
... More
Supply & providing extra reinforcement at the area where corrosion has gone above 25% with proper over lapping and fixing using welding or lapping or dowel or anchoring system and placing in position at all hights & depths of high strength deformed weldable quality reinforcement bars of grade Fe-415 or Fe-500 higher grade conforming to IS:1786 (latest version) cutting, bending, welding to required shape and length binding with 16 SWG black soft annealed binding wire welding if required to form a rigid cage and placing with proper cover block, supports, chairs, spacers complete all as directed. [Note: No extra payment will be admissible if reinforcement provided is of higher grade]
250
-
-
... More
Removing vegetation / plant growth from the surfaces of the building complete with roots at any height and applying suitable chemical to prevent further growth and making good the disturbed surfaces using CM 1:3 and surface shall be finished to match with adjoining surfaces including removal of debris to off the premises complete all as directed.
50
-
-
... More
S & F mild steel framed work such as grills, grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290, Gde E-165 including dismantling old structural steel work complete all as specified and as directed
200
-
-
... More
S & F Plain, galvanised, mild steel sheeting 1.0mm thick, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified
20
-
-
... More
M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
40
-
-
... More
M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over complete all as specified.
10
-
-
... More
M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing
in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6 including dismantling old stone slabs of any description complete all as specified and as directed. [Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded.]
24
-
-
... More
M & L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6 including dismantling old stone slabs of any description complete all as specified and as directed. [Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded.]
136
-
-
... More
Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
69.2
-
-
... More
M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and tested in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.
20
-
-
... More
M & L for concrete bed to drain pipes of size 200 mm bore packing under and haunching against the sides of pipes after they are laid and tested in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.
50
-
-
... More
M & L for 150mm dia [inner dia] double wall corrugated HDPE pipes in any length including necessary collars, fittings and fixtures laid in trenches including demolition and breaking of old pipes and removing rubbish off the premises complete all as directed
20
-
-
... More
M & L for 200mm dia [inner dia] double wall corrugated HDPE pipes in any length including necessary collars, fittings and fixtures laid in trenches including demolition and breaking of old pipes and removing rubbish off the premises complete all as directed
50
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. (Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.)
41
-
-
... More
Removing excavated material /soil to a distance exc 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and directed
65.5
-
-
... More
M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 including demolition of old masonry complete all as specified and directed.
21.48
-
-
... More
M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.
25.92
-
-
... More
M & L for providing Precast RCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in Landings, Cover Slabs [for manholes etc], Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 including demolition of existing cement concrete and removing debris not exc 100m complete all as specified and as directed.
6
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and as directed.
4
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200 mm dia of pipe complete all as specified and as directed.
4
-
-
... More
M & L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete including demolition of old concrete complete all as specified.
5
-
-
... More
M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 (Except stone) including demolition of old masonry complete all as specified and directed.
5
-
-
... More
M & L for Providing precast cement concrete louvres and jallies, 50mm thick (measured solid), including all mouldings in RCC 1:2:4, type B-0 using 12.5mm graded stone aggregate set in CM 1:4 including dismantling old RCC jallies complete all as directed
19.2
-
-
... More
Excavation over areas not.exc 1.5m depth and getting out in soft / loose soil complete all as specified and directed.
37.5
-
-
... More
M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled and consolidated complete all as specified.
25
-
-
... More
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over and including 50mm thick sand cushioning over 100mm thick, PCC 1:2:4, Type B-2, using 40mm graded stone aggregate complete all as specified and directed
250
-
-
... More
SCHEDULE 'A' PART-II [E/M Works]:
M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes with cover plates, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch including taking down old point wiring with fixtures and fittings complete all as specified and directed. [Note:Quoted rate is deemed to be inclusive for making good to the disturbed surfaces whrever required]
376
-
-
... More
All as per item No. 153 above but suitable for one light point controlled by two 02 way switches
6
-
-
... More
All as per item No. 153 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on the same board
32
-
-
... More
All as per item No. 153 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on independent board
112
-
-
... More
All as per item No. 153 above but point wiring with PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 2.5 Sqmm (nominal area) suitable for one 15 Amps power point on independent board complete all as specified and directed.
32
-
-
... More
All as per item No. 153 above but point wiring with PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 4.0 Sqmm (nominal area) suitable for power point on independent board complete all as specified and directed. [For AC & Cooler points]
32
-
-
... More
S & F in repairs TV socket outlet with metal box
32
-
-
... More
S & F modular switch single pole, 1 way, 6 Amps, 1 module
504
-
-
... More
S & F modular switch single pole, 2 way, 6 Amps, 1 module
12
-
-
... More
S & F modular bell push flush type 6 Amps, one way, 1 module
16
-
-
... More
S & F modular switch 1 way, 16 Amps, 1 module single pole
32
-
-
... More
S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module
144
-
-
... More
S & F modular socket outlet, 6/16 Amps, 2/3 pin combined 2 module
32
-
-
... More
S & F modular electronic fan regulator, socket type, 2 module complete all as specified and directed.
64
-
-
... More
S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed
334
-
-
... More
S & F Calling bell, ding dong AC, 230 Volts, single pole
16
-
-
... More
S & F in repairs sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB, SP, 20 Amps, 240 volts, 10 KA complete all as specified and directed.
32
-
-
... More
M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 2.5 Sqmm, drawn through and including 20mm dia concealed PVC conduit and conduit accessories including provision of 1 run of 2.5 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 2.5 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.]
140
-
-
... More
M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 6.0 Sqmm, drawn through and including 20mm dia concealed PVC conduit and conduit accessories including provision of 1 run of 6.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 6.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.]
176
-
-
... More
S & F in repairs VTPN, MCCB DB 4 way powder coated sheet steel enclosure fitted with bus bar, DIN channel & neutral link & earth link complete all as directed
2
-
-
... More
S & F in repairs MCB DB, SPN, 12 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.
16
-
-
... More
S & F in repairs 4 Pole MCCB, 63 Amps, 50 Hz, with rupturoing capacity 16 KA
2
-
-
... More
S & F in repairs MCB, SPN, 32 Amps, 240 Volts, 10 KA, C series
16
-
-
... More
S & F in repairs MCB, SP 6 to 32 Amps, 240 Volts, 10 KA, C series
184
-
-
... More
S & F in repairs LED tube light fittings, retro bar professional WH 5700K to 6200K and 1800 to 2000 lumens of cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.
118
-
-
... More
Taking existing LED tube light fitting of any type and capacity and refixing the same in new or same location with all accessories including prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.
10
-
-
... More
S & F in repairs LED tube light fittings, 2 feet long of 900 to 1000 lumens of cool white wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge.
27
-
-
... More
Taking existing LED mirror light fitting of any type and capacity and refixing the same in new or same location with all accessories including prewired and connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.
5
-
-
... More
S & F in repairs LED light fitting 1x9W / 1x10W bulkhead luminairies including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as directed
46
-
-
... More
S & F in repairs Building Security light LED type of minimum 3500 Lumens new generation energy saving & environmental friendly long life made up of Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.5m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings with brackets complete all as specified and as directed by the Engineer-in-Charge.
10
-
-
... More
Taking down existing building Security light fittings and refixing the same with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed by the Engineer-in-Charge.
2
-
-
... More
S & F in repairs Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
54
-
-
... More
Taking down existing lamp holder, and refixing the same in position complete all as specified
10
-
-
... More
S & F in repairs LED bulb, 9 Watts, not less than 900 lumens, Luminous efficacy 100 Lum/Watt, CCT: WW/NW/CW, CRI 80 Ra complete all as directed
64
-
-
... More
Taking down existing Exhaust Fan of any capacity and type and refixing the same in position after necessary cleaning, greasing including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of suitable size including making making good the disturbed surface to match with adjoining surfaces complete all as specified and as directed.
16
-
-
... More
Taking down existing ceiling fan of any capacity and type and refixing the same in position after necessary cleaning, greasing including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of suitable size complete all as specified and as directed.
64
-
-
... More
S & F in repairs 4mm dia galvanised iron Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as directed
40
-
-
... More
Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with galvanised earth wire 4.0mm dia as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on ompletion including taking out old earthing and as directed.
[Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 15mm dia, earthing lead upto 7.5m including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the electrode complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]
4
-
-
... More
M & L for scrapping the old decorated steel surfaces of MS boxes of size 900x600x150mm inside the wall and applying one coat of synthetic enamel spray painting complete all as directed
16
-
-
... More
S & F in repairs 20mm dia Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories
such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as directed
100
-
-
... More
S & F stationary louvers suitable for 300mm sweep exhaust fan made out of powder coated aluminium anodised sheet of minimum 1mm thick with non removable blades fixed permanently at 450 angle for protection from rain including aluminium wire mesh for protection from birds complete all as directed.
16
-
-
... More
Taking down existing storage type water heater of any capacity and type and size by disconnecting from power socket, carrying out necessary repair and painting including cleaning the inner water tank, removing of hard water deposits and connected back and refixing the same in original position including testing and commissioning complete all as directed
16
-
-
... More
Taking down existing electric meter carefully from the the wall and refixing the same in original position after renovation / repair works complete all as directed
16
-
-
... More
Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with GI earth strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on ompletion including taking out old earthing and as directed.
[Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 15mm dia, earthing lead upto 7.5m including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the electrode complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]
4
-
-
... More
S & F Earth continuity conductor or main earthing lead of GI strip 32x6mm laid in trenches / floor or fixed to wall including necessary clamps, nuts, bolts, insulator and hylem sheet block complete all as specified and directed
12
-
-
... More
S & F in repairs Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as directed
100
-
-
... More
Taking down existing Aluminium strip and refixing the same with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as directed
20
-
-
... More
S & F in repairs Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.
20
-
-
... More
Taking down existing Air termination, single pointed aluminium rod 12mm dia and 300mm long and refixing the same complete all as specified and directed.
4
-
-
... More
S & F Test terminal box of size 175x150x100mm made out of 2mm thick hot dip galvanised sheet drilled and screwed including 4 Nos 25mm long hexagonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw complete all as directed
4
-
-
... More
S & F Exhaust Fan, 250mm Sweep, 1350 RPM, PVC Body, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter / Grill of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of suitable size including making making good the disturbed surface to match with adjoining surfaces complete all as specified and as directed.
16
-
-
... More
Supply and Laying LT XLPE insulated, PVC sheathed, bedded, galvanised steel strip or wire armoured, heavy duty, electric power cables of size 3.5core 35 Sqmm, 1100 volts grade, with aluminium conductor laid in trenches / passing through pipe / duct / road crossing / fixed on poles / walls and connecting up with suitable glands, lugs, nuts and bolts and testing on completion including taking out old unserviceable cable complete all as specified and directed by the Engineer-in-Charge.
160
-
-
... More
M & L for Sand filling in trenches using dry river sand as cushioning to under ground cable including spreading, levelling and consolidation complete all as specified and directed.
[Note: Punned thickness of sand shall only be measured.]
9
-
-
... More
Supply and laying common burnt burnt building clay bricks of sub-class 'B' designation 75 complete all as directed
900
-
-
... More
Supply and laying GI pipe 40mm bore, light for cable protection laid in trenches complete all as directed
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%