Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date4 Sep 2024
Closing Date26 Sep 2024
Tender Amount₹ 48,00,000
Costs
EMD
₹ 96,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671780_1Bid Award Id
ViewTender No
C/8369/24-25/E8 / Token 52 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.
110
-
-
M&L for Non-skid light coloured ceramic joint free tiles with tile spacer of minimum 3 mm thickness & in light shade 7 to 8mm thick , area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm in floors set and jointed with epoxy grout and masking tape and pointed in white cement or white cement mixed with colour pigment to match the shade of the tile including 15 mm thick screed bed in cement mortor 1:6 a complete all as specified and directed.
72
-
-
All as per item no 05 here in before but as in skirting ,dados etc. set and jointed in neat epoxy grout and masking tape over a bedding layer of backing coat 10 mm thick in CM 1:4 and pointed in white/colour cement to match complete all as specified and directed.
15.75
-
-
M&L for Glazed ceramic tiles in vertical surface 450 x 350/450 x300 ,7 to 8 mm thick with tile spacer of minimum thickess 3mm ,set and jointed with epoxy grout and masking tape and pointed in white cement or white cement mixed with colour pigment to match the shade of the tile including bedding layer of backing coat 10 mm thick in CM 1:4 complete all as specified and directed. Note : Rate includes for cutting for offsets etc
130
-
-
M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc and set & jointed in neat cement slurry and 3mm wide joints shall be maintained with spacers which is to be filled with epoxy grout using masking tape and the masking tape is to removed after filling the epoxy grout including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
60
-
-
Cutting openings, through brick walls built in cement morter for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.
0.5
-
-
Providing precast cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) set in cement morter 1:4 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle
blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets,
etc. (of any section indicated), with plain fair faces, including chamfers,
weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.
0.05
-
-
S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
3
-
-
S & F high strength corrosion resistantMild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.
5
-
-
M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.
2
-
-
Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.
60
-
-
S & F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed by the Engr-in-Charge.
105
-
-
S&F Gypsum Board, 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.
105
-
-
M & L for Preparation new surfaces of ceilings etc of any description over 10 cm width or girth not otherwise described by "Vacuum based sanding machine" and applying two coats of oil bound distempert over a coat of primer by "Aquto Roller" machine complete all as specified and directed.
45
-
-
S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm).
315
-
-
S & F Powder coated (minimum 50 micron) Anodised aluminium door shutters,
aluminium section weighing 0.55 kg/m including necessary joining cleats,
glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,
anodised aluminum snap beading screws etc. complete all as specified and directed
47.14
-
-
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
35
-
-
S & F12 mm thick, plywood, grade BWP, type BB, fixed with screws to timber frame work, etc complete all as specified and directed.
15.5
-
-
Supply only 5.5 mm thick, tinted glass, ordinary quality and glazing with aluminium beading/rubber beading exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of rubber/aluminium beads and fixing included with the unit quoted rate of respective aluminium shutter)
34
-
-
S & F Powder coated (minimum 50 micron) Anodised aluminium window and
ventilator shutters, side hung type without sash bars, aluminium sections
weighing 0.55 kg/m including necessary joining cleats, glazing clips,
rubber packing, anodised aluminium snap beading, screws, anodised
aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21
100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed
42.38
-
-
Taking down Chowkats or frames with shutters not exceeding 1.5 Sq.m each (Without taking off shutters from the frames) complete all as specified and directed.
6
-
-
Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M each n exc 4 sqm (Without taking off shutters from the frames) complete all as specified and directed
8
-
-
S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing.
28.8
-
-
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and as directed.
9.6
-
-
S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed.
13
-
-
S & F Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
13
-
-
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed
20
-
-
S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.
19
-
-
S & F 125 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed.
36
-
-
S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
20
-
-
Taking up or down steel tubing 15mm dia bore including all connection complete all as specified and directed
30
-
-
Taking up or down steel tubing 20 mm dia bore including all connection complete all as specified and directed
40
-
-
Supply, laying, connection and testing in repair, 15 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
30
-
-
Supply, laying, connection and testing in repair, 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
40
-
-
M & L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area exc 150 sq.cm but n.exc 400 Sq.cm complete all as specified and directed.
200
-
-
S & F in repair 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
16
-
-
S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. Make: Prayag Cat No. 323-ZK or equivelant of make as per list of manufacturer mentioned in PS.
12
-
-
S & F in repairs, 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No.KUP-35041PM or equivelant of make as per list of manufacturer mentioned in PS.
4
-
-
S & F in repair 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) with all accessories complete all as specified and directed. Make: Jaquar Cat No. ALD-577 or equivelant of make as per List of manufacturer mentioned in PS.
5
-
-
S & F in repair tumbler holder, brass chromium plated, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat No. AQN-7741 or equivelant of approved make as per list of manufacturer mentioned in PS.
4
-
-
S & F in repairs, Vitreous China wash basin, Under Counter Basin with Fixing Accessories, Size: 480x365x205mm, Rectangular Shape excluding taps but including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, rubber plug with rings including 32mm dia PVC flexible waste pipe of suitable length complete all as specified and directed. Make : Jaquar Cat No. CNS-WHT-701 or equivalent of make as per List of manufacturer mentioned in PS.
6
-
-
M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished), machine cut, colour Mexican Red/Ruby Red/Z black/Paerl black etc design/pattern as directed including inlays, borders, margins in two or more colours/shades as in floors, trades of steps, cill cooking platform etc set and bedded and jointed with grey cement slurry and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite slabs including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. (Note: Single stone slab shall be used for entire length/height of steps, jambs, pillars, window cills, cooking platform etc and joints sahll match with the flooring complete)
9
-
-
S & F in repair 15 mm bore, pillar taps, brass chromium plated, Single Lever screwed for iron pipe complete all as specified and directed. Make: Jaquar Cat No.KUP-35001PM or equivelant of make as per list of manufacturer mentioned in PS.
6
-
-
S & F in repair Towel Ring Square with Round Flange including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. Make: Jaquar Cat No. ACN-1121N or equivelant of make as per list of manufacturer mentioned in PS.
6
-
-
S & F in repair Soap Dispenser with Glass bottle, brass chromium plated, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat No. AKP-35735P or equivelant model of make as per list of manufacturer mentioned in PS.
2
-
-
S & F in repair, Toilet paper holder with cover, brass, chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No. ACN-1153S or equivelant of make as per List of manufacturer's mentioned in PS.
7
-
-
S & F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No.KUP-35053PM or equivelant of make as per list of manufacturer as metioned in PS
12
-
-
S & F in repair 15 mm bore, Pillar Cock Auto Closing System , cast copper alloy, chromium plated, high pressure with all fittings, screwed for iron pipe complete all as specified and directed. Make: Jaquar Cat No. PRS-001 or equivelant of make as per list of manufacturer as mentioned in PS.
4
-
-
S&F vitrious china waterless Urinal of size 600mm x330 mm x 315 mm ,without floshing arrangement,100% Hygienic ,without liquid carterage , water saving, Anti-bacterial/Germ free ceramic surface, mounted on Z type brackets Outlet to wall/floor including dismantling old urinal complete all as specified and directed. Make: Hindware model no.Urinal AQUAFREE 60017 or equivelant model of make as per list of manufacturer as mentioned in PS.
7
-
-
S&F chromium plated urinal valve auto closing system with built-in control cock & wall flange complete all as specified and directed. Make: Jaquar Cat No. PRS-077 or equivelant of make as per list of manufacturer as mentioned in PS.
7
-
-
S&F chromium plated urinal spreader back inlet 75mm Tail Slab fixing complete all as specified and directed. Make: Jaquar Cat No. ALD-1041 or equivelant of make as per list of manufacturer' as mentioned in PS.
7
-
-
S&F rectangular shaped urinal partition with 8 mm/10 mm frosted glass with necessary chrome finished accessories complete all as specified and directed Make: Jaquar Cat No. JSE-CHR-810US450X or equivelant of make as per list of manufacturer as mentioned in PS.
4
-
-
Suppy and fixing in repair looking mirror with frame of size 600 mm x 450mm x 6 mm of selected quality Belgium glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. Make: Prayag Cat No. BLM-01F or equivelant of make as per List of manufacturer as mentioned in PS.
4
-
-
S & F in repair Soap Dish Holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat No. AKP-35731P or equivelant model of make as per list of manufacturer mentioned in PS.
2
-
-
S & F vitreous china, rimless bowl for coupled WC, size: 385x645x815 mm, with UF soft close slim seat cover, hinges, fixing accessories , P trap-180mm with and including cistern with dual flush fitting complete all as specified and directed. Make: Jaquar ONS-WHT-10753P180UFSM for WC and ONS-WHT-10203 for Cistern or equivelant model of make as per list of manufacturer mentioned in PS.
4
-
-
S & F in repairs, CP, wall mixer, 3 in 1, quarter turn with 115mm long bend pipe connecting legs and wall flange complete all as specified and directed. Make : Jaquar Cat No. CON-273KNUPR or equivelant model of make as per list of manufacturer mentioned in PS.
3
-
-
S & F in repair Overhead Shower 150X150mm square shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system complete all as specified and directed.
Make: Jaquar Cat No. OHS-35495 or equivelant model of make as per list of manufacturer mentioned in PS.
3
-
-
S & F in repairs, 15mm bore, bib taps, long body, fancy type, with wall flange cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No.OPP-15037PM or equivelant of make as per list of manufacturer as mentioned in PS.
6
-
-
M & L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
5
-
-
M & L for 40 mm thick (average), plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in flooring, etc mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC sall be measured and paid seperately)
20
-
-
M & L for injecting/grouting cement slurry mixed with Epoxy resin injection grout in to roof/sunken slabs of toilet by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval by mechanical means with required pressure complete all as per manufacturer's instructions and as directed Make : Conbextra EP 10 of M/S Fosroc Chemicals or quivalents solutions SIKA/STP/HINDCON as approved by GE.
20
-
-
M & L for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
30
-
-
S&F in repair 50 mm bore unplasticized PVC (UPVC) pipes of pressure rating 10 kgf/sq. cm including all fittings and fixed to wall ,ceiling and laid on floor including testing complete all as specified and directed.
1.8
-
-
Supply only integral water proofing compound [ISI marked] of approved make complete all as specified and directed.
15
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
75
-
-
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75mm bore including necessary bracket,clamp etc complete all as specified and directed.
5
-
-
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed.
40
-
-
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenchs 110mm bore complete all as specified and directed.
30
-
-
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.
6
-
-
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.
6
-
-
S & F 110 mm bore, PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified and directed.
2
-
-
S & F 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
6
-
-
S & F in repar aluminium peg stay (hooking capacity 8-12 kg) fixed on wall/door/window with stainless steel screws complete all as specified and directed.
6
-
-
M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS
200
-
-
S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
16
-
-
M&L for anti termite treatment at points of contact of wood work by
chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by
drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed
50
-
-
M&L for anti termite treatment along the external wall below concrete or
masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed
100
-
-
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
20
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.
18
-
-
Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
2
-
-
Drilling and tapping from existing DI water mains upto 150 mm dia (in position) for branch connections for the internal dia 65 mm complete all as specified and directed.
1
-
-
Drilling and tapping from existing HDPE water pipe upto 65 mm dia (in position) for branch connections as per site requirment complete all as specified and directed.
6
-
-
Supply, laying and testing, 65 mm bore HDPE pipe, PN-10 laid in trenches/floor/pillar including supply and fixing necessary fittings like bend/socket/Tee/reducer etc as per site requirment complete all as specified and directed.
80
-
-
All as per item no 86 here-in-above but 50 mm bore complete all as specified and directed.
20
-
-
Supply and fixing to wall / laying in trenches 25mm bore GI steel tubing medium grade including all fittings such as Tees, elbow, bands etc complete all as specified and directed.
20
-
-
Supply & fixing 50 mm bore gun metal gate valve (ISI marked) screwed down high pressure with handle with iron wheel both ends screwed for iron pipe complete all as specified & directed.
1
-
-
Supply & fixing 25 mm bore gun metal gate valve (ISI marked) screwed down high pressure with handle with iron wheel both ends screwed for iron pipe complete all as specified & directed.
6
-
-
Supply and fixing cast iron sluice valve (heavy duty) hand wheel operated ,non raising SS spindle with gun metal parts, confirming to IS 14846, both end flanged class PN 1.6 of 65 mm bore incl necessary nuts, bolts washers and gasket complete all as specified and directed.
1
-
-
S & F 15 mm bore, water sprinkler suitable for Arboriculture works with rotary spary heads/nozzles made out of gum netal including necessary connection complete all as specified and directed.
6
-
-
Material and labour for construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimension) with burnt brick (sub class "B") in cement mortar (1:6) on 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm thick MS sheet duly welded with provision of hinges, handle and locking arrangement including 40 x 40 x 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, applying two coats of anti-corrosive paint over a coat of red oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation & earth work in soft/loose soil and demolition of existing one complete as specified and directed all as per relevant TD drawing. (Note : Drawing not attached with the tender document. However, the same can be seen in AGE E/M office during working hours)
1
-
-
All as per item no 93 above but of size 600mm x 600mm x 600mm internally complete all as specified and directed
1
-
-
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
30
-
-
M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
5.35
-
-
M & L for walling of random rubble,uncoursed, well bonded, laid dry
in retaining walls, abutments and similar work built in CM 1:4 complete all as specified and directed
77
-
-
M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.
8
-
-
M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.
2.4
-
-
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls or laid in floor including necessary bracket,clamp etc complete all as specified and directed.
10
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil complete all as specified and directed.
12
-
-
Removing excavated material exc. 1.50 km but n exc. 5 km and
depositing where directed complete all as specified and directed
18
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc except light fitting. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
10
-
-
Taking down of existing sub main wiring of any size and description complete all as directed.
45
-
-
M & L for conceled Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch.
(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)
7
-
-
All as per item No. 105 above but for One light point controlled by two Nos two way switch complete ditto
1
-
-
All as per item No. 105 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto
2
-
-
S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.
9
-
-
S & F switch modular single pole Two way 6 amp 240 volts,1 module complete all as specified and as directed.
2
-
-
S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.
10
-
-
S & F Modular socket outlet 6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed.
2
-
-
M & L for Sub main wiring with 2 runs of Single core 1.5 sqmm [ for Phase & Neutral ] PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 1.5 sqmm PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i)Two runs of 1.5 sqmm and one runs of 1.5 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
45
-
-
M & L for Sub main wiring with 2 runs of Single core 4.0 sqmm [ for Phase & Neutral ] PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 4.0 sqmm PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i)Two runs of 4.0 sqmm and one runs of 4.0 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
200
-
-
M & L for Sub main wiring with 2 runs of Single core 6.0 sqmm [ for Phase & Neutral ] PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 6.0 sqmm PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i)Two runs of 6.0 sqmm and one runs of 6.0 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
20
-
-
M & L for Sub main wiring with 2 runs of Single core 10.0 sqmm [ for Phase & Neutral ] PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 10.0 sqmm PVC insulated,unseathed, multi stranded FRLSH (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed.
(Note :- (i)Two runs of 10.0 sqmm and one runs of 10.0 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one )
55
-
-
S&F LED tube light fitting 1x20 watt,surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and connecting with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed. Make: Havell's cat part No. LUMILINEBS20WLED830SPCWH or equivalent make as per List of Manufacturer's mentioned in PS
6
-
-
Supply and fixing MCB TPN DB ,Double door, made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 6 way TPN with 200 Amps rated busbar, 240 volts complete all as specified and directed. Make: Havell's cat part No. DHDNTHCDRW06 or equivalent make as per List of Manufacturer's mentioned in PS)
1
-
-
S & F in repair Distribution Board, SPN 8 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed. Make: Havell's cat part No. DHDPSHODRW08 or equivalent make as per List of Manufacturer's mentioned in PS)
3
-
-
Supply, fixing, commissioning and testing MCB SPN 6-32 Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed Make: Havell's cat part No. DHMGCSNF006-032 or equivalent make as per List of Manufacturer's mentioned in PS
5
-
-
Supply, fixing, commissioning and testing MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve, complete all as specified and as directed (Make: Havell's cat part No. DHMGCSPF006-032 or equivalent make as per List of Manufacturer's mentioned in PS)
30
-
-
Supply, fixing, commissioning and testing MCB TP 63 Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed (Make: Havell's cat part No. DHMGCTPF063 or equivalent make as per List of Manufacturer's mentioned in PS)
1
-
-
Supply, fixing, commissioning and testing MCB TPN 63 Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed (Make: Havell's cat part No. DHMGCTNF063 or equivalent make as per List of Manufacturer's mentioned in PS)
1
-
-
S & F Exhaust fan, 300 mm sweep, heavy duty, metal body 1400 RPM, AC, single phase, complete with all accessories and louver and electric connection including making necessary holes in walls complete all as specified and directed Make : Havells, Model : Ventil Air DS or equivelant of make r equivalent make as per List of Manufacturer's mentioned in PS
2
-
-
Supply, installation and testing inverter split AC units indoor/outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 star rating,copper condenser,copper cooling coil and EER 3.2 of capacity 2.0 TR including 2.5 sqmm 4 core flex copper cable connection from indoor to outdoor unit as per site requirement including making holes of required dia on walls and necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable, angle iron bracket will be neasured and paid separately under respective item MAKE:- Bluestar,Carrier,Voltas,LG, Daikin ,Hitachi. General ,Samsung
2
-
-
S & F voltage stabilizer of capacity 5 KVA, single phase, input working voltage 170-250 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed. Make: V-Gaurd model no VG-500 or equivalent model of make mentioned in PS
2
-
-
S & F Single phase sheet metal enclosure with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20Amp 240V, C-curve complete all as specified and as directed. Make: Havell's Cat No. DHDMCSN0251020 or equivelant model of make as per list of manufacturer mentioned in PS.
16
-
-
S&F digital air conditioning change over timer with dip switch , works on two AC load up to 16A (Total load 16+16=32A) Input Supply: 230VAC +/- 15 %, 50Hz. Output: 230V, 25 Amp suitable for programing of 8 hrs or 12 hrs including contractor for switching complete all as specified and directed. Make : Proton or any other make with ISI marked
2
-
-
S & F MS stand for mounting outdoor unit of Split Ac of capacity upto 2.5 Ton complete all as specified and as directed.
16
-
-
Supply, installation and testing inverter split AC units indoor/outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 star rating,copper condenser,copper cooling coil and EER 3.2 of capacity 1.5 TR including 2.5 sqmm 4 core flex copper cable connection from indoor to outdoor unit as per site requirement including making holes of required dia on walls and necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable, angle iron bracket will be neasured and paid separately under respective item MAKE:- Daikin Model No. FTKM50UV16U/V / Hitachi Model No. RSRG518FFEO KIYORA5200 / O- General Model No. ASGG18CETAB”
14
-
-
S&F 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on wall for air condition water discharge pipe and connecting into rain water discharge pipe complete all as specified and directed
196
-
-
S&F 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on wall for air condition water discharge pipe and connecting into rain water discharge pipe complete all as specified and directed
250
-
-
S & F voltage stabilizer of capacity 4 KVA, single phase, input working voltage 170-250 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed. Make: V-Gaurd model no VG-400 or equivalent model of make mentioned in PS
14
-
-
Supply and fixing copper pipe line heavy duty 1/4" dia with flair nuts and insulation as sunction/ discharge pipe of split AC complete all as specified and directed.
20
-
-
Supply and fixing copper pipe line heavy duty 1/2" dia with flair nuts and insulation as sunction/ discharge pipe of split AC complete all as specified and directed.
20
-
-
Taking down carefully serviecable / unserviceable Split / Window type AC units of any Make , model and capacity up to 2.0 ton, incl all connected items ie. Suction/ delivery pipe, MS stand for outdoor unit and shifting from inside corridor to out side corridor ground floor/terras or in MES store complete all as specified as directed by Engr-In-charge
70
-
-
Refixing of serviceable window/split type AC indoor and out door unit of any make, model and 1.5/2 Ton capacity obtained from item item srl no 125 above at required location after leakage detection, chemical servicing, including testing complete all as specified as directed by Engr-In-charge. Note : Split AC outdoor unit are to be fixed on Terras/ ground floor outside corridor of the multi stage building upto height of 15 mtr
70
-
-
Supply and charging of R134A/R32/R22 Gas in factory sealed cylinder for all types of AC Units complete all as specified and directed.
38
-
-
S&F in replacement of copper tubing of 5/8” dia suitable for suction / discharge line with and including suitable insulation for split type AC complete all as directed.
280
-
-
S&F in replacement of copper tubing of 3/8” dia suitable for suction / discharge line with and including suitable insulation for split type AC complete all as directed.
110
-
-
S&F in replacement of copper tubing of 1/4” dia suitable for suction / discharge line with and including suitable insulation for split type AC complete all as directed.
495
-
-
S&F in replacement of copper tubing of 1/2” dia suitable for suction / discharge line with and including suitable insulation for split type AC complete all as directed.
345
-
-
S & F three core, PVC insulated, unsheathed, multistranded copper conductor cable, 1100 vols grade ISI marked of size 2.5 sqmm complete all as specified and as directed.
650
-
-
S & F three core, PVC insulated, unsheathed, multistranded copper conductor cable, 1100 vols grade ISI marked of size 2.5 sqmm complete all as specified and as directed.
60
-
-
S & F in repair MS stand for mounting outdoor unit of Split Ac of capacity upto 2.0 Ton complete all as specified and as directed.
35
-
-
S&F in repair UPVC casing and capping of size 50mm* 50 mm including cover, bends, elbows, couplers,tees, internal and external bends, arrananging existing electrical cables/ copper refrigiration pipes complete all as directed by Engr- in -charge
400
-
-
M & L for complete chemical servicing of the indoor and out door unit with appropriate chemical agent and flushing out the fins area and blowing out water and dust and lubricating of fan bush / bearing and checking of all electrical connections, testing and commissioning of 1.5/2.0/3.0 Ton capacity split ACs/tower ACs complete all as specified and as directed.
(Note : Unit quoted rate shall deemed to be inclusive of transportation cost to workshop and back (if required).
35
-
-
S & F in repair running capacitor of 45 MFD suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs complete all as specified and as directed.
Make: Sarada/Unistar/Crompton
5
-
-
S & F in repair Starting capacitor of 50 MFD suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs complete all as specified and as directed.
Make: Sarada/Unistar/Crompton
5
-
-
S & F in repair voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 180 V to 270 V with output of 230V with accuracy of +/- 2.5% variation of capacity 5.0 KVA complete all as specified and directed. Make: V-Gaurd model no VG-500 or equivalent model of make mentioned in PS
35
-
-
M & L for taking down defective split type AC unit, shifting to work shop, taking out the defective compressor of capacity 1.5 T capacity from unit, replacing the compressor with new compressor, refixing the compressor to the unit, cleaning refrigeration system with CTC thoroughly, leak testing with refrigerant gas, testing at workshop, shifting to location, re-installing the same in its original position, connecting up all electrical connections, testing and commissioning complete all as per existing make and specifications and as directed. Note:- Cost of new compressor shall deemed to be included in quoted rate Make of compressor : LG/Samsung/Voltas/Kirloskar/Techamsa/Bluer Star
2
-
-
All as per Serial Item No. 150 above but for 2.0 T capacity split Acs
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements