Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Dec 2023
Closing Date21 Feb 2024
Tender Amount₹ 1,76,00,000
Costs
EMD
₹ 2,51,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_632583_1Bid Award Id
ViewTender No
CE CG /VIZ/TOKEN 14 OF 202223Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down cement plaster on brick or concrete surface in any description etc including racking out joints, hacking for key, scrubbing down with water and removal of rubbish from the premises, complete all as specified and directed
1375
-
-
... More
Dismantling of stone slab and tiles of any type , any description or thickness laid dry in any mortar as in floors.
25.05
-
-
... More
Dismantling of stone slab and tiles of any type , any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc, complete all as specified and directed.
11.07
-
-
... More
Dismantling of floor hearth, wall tiling incl cement mortar bedding(but not backing)/PCC removing of serviceable tiles to store and rubbish off the premises complete all as specified and directed.
1065
-
-
... More
Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings, complete all as specified and directed.
42
-
-
... More
Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
6
-
-
... More
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.50 Sqm and not exc 4.00 Sqm each, complete all as specified and directed.
14
-
-
... More
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) including area not exc. 1.50 Sqm each, complete all as specified and directed.
19
-
-
... More
Taking down shutter for easing & adjusting and also refixing of any description exc1.00 but not exc 2.00Sqm each, complete all as specified and directed.
10
-
-
... More
Taking down aluminium window/door/ventilators [without taking off shutter from the frame] not exceeding 1.5 Sqm each complete all as specified and as directed.
15
-
-
... More
Taking down aluminium door/window [without taking off shutter from the frame] exceeding 1.50 Sqm but not exceeding 4.00 Sqm each, complete all as specified and as directed.
10
-
-
... More
Taking down shutters of any description area exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and directed.
7
-
-
... More
Taking down aluminium window/door/ventilators shutter of any description not exceeding 1.00 Sqm each, complete all as specified and as directed.
10
-
-
... More
Taking down aluminium window/door/ventilators shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, complete all as specified and as directed.
15
-
-
... More
M&L for Excavation in trench in any type of soil (except rock) for sand infill of width 0.40 m and depth up to 6.0 m as per site requirement, complete all as specified and directed.
Note: Quoted rate includes all T&P and all necessary accessories required at site and dewatering if necessary.
160
-
-
... More
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc., and getting out in hard/dense soil, complete all as specified and directed.
75
-
-
... More
Returning and filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.
40
-
-
... More
Removal of excavated soil exec 50m and n exc 250m and deposition where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.
34.69
-
-
... More
Supply and filling River sand (N-Sand) / M-Sand of approved quality (Zone-2) under floors in foundation and plinth etc., including the cost of sand, transportation for all leads, loading, unloading spreading in layers of 15 cm thickness at all depths, watering, ramming, compacting to required depth, levelling etc., complete as per direction of Engineer-in-Charge.
Note: Where sand is required to be manually carried (without hand trolleys or through other mechanical means) to any distance/lead i.e., from the vehicle unloading point/ stacking point upto the sand filling point, within unit areas etc., shall be deemed to be included in the quoted rate.
160
-
-
... More
M&L for Moorum/red bajri filling in floors or paving's, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering including ramming, complete all as specified and directed.
250
-
-
... More
M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
4.5
-
-
... More
M&L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution )@ 0.5ltre/hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.
200
-
-
... More
M&L for providing and injecting emulsion for post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.
100
-
-
... More
PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in concrete bed to drain pipes/man holes incl packing, complete all as specified and directed.
4
-
-
... More
M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
6.55
-
-
... More
M&L for Corrosion resistant TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, all as specified and directed.
385
-
-
... More
M&L for Brick Work with Sub class "B' Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6), complete all as specified and as directed.
30
-
-
... More
M&L Brick Work with Sub class "B" Bricks in Half-Brick thick, Old Size, built in Cement Mortar (1:4), Straight or Curved on Plan to any Radius, complete all as specified and as directed.
60
-
-
... More
M&L for Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6), complete all as specified and as directed.
57
-
-
... More
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished fair and even, without using extra cement, complete all as specified and directed.
217
-
-
... More
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and directed.
840
-
-
... More
M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar (1:3), finished even and smooth without using extra cement, including necessary scaffolding, complete all as specified and directed.
25
-
-
... More
M&L for rendering 15 mm thick built in cement mortar (1:4) in two layers (10mm + 5 mm) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and 2nd layer mixed with water proofing compound as per manufacturer's instruction, upto any height of bldg with necessary scaffolding and safety precautions, complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately as "Supply only").
930
-
-
... More
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
19
-
-
... More
M&L for cutting holes in brick wall exceeding half brick but not exc one brick thick walls for inserting hold fasts for mild steel grills and making good dismantled portion in cement concrete 1:2:4 type B1 (using 20 mm graded aggregates) including necessary formwork and making good surfaces as per existing finishes, complete all as specified and directed.
84
-
-
... More
M&L for structural steel work Fe 410-W (Gde-E-250) quality-A in roof trusses (framed), trussed, main and cross beams, hip and jacks, rafters, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.
(NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
527
-
-
... More
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE-410-W (Gde E-250), complete all as specified and directed.
60
-
-
... More
S&F mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long, neck diameter exc 20 mm not exc 25 mm, complete all as specified and directed.
13
-
-
... More
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting of 0.50 mm thick of any colour having tensile strength of 550Mpa fixed with self tapping screw with washers as roof covering, complete all as specified and directed.
42
-
-
... More
M & L for Preparation of new or previously un-treated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
50
-
-
... More
S&F 2nd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.
0.44
-
-
... More
M&L for Mild Steel Bands, straps, supports or stays for rainwater, ventilating, pipes, including bolts, if required hooks (stays ) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts, clamps, hold fasts, plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe-290 Gde E-165, complete all as specified and directed.
24.78
-
-
... More
Preparing surfaces of treating ends of posts, backs of chowkhats etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each of any description and treated with tar or coal tar black paint, complete all as specified and directed.
0.14
-
-
... More
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.
70.5
-
-
... More
S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face With Wood free EPS, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.
20.55
-
-
... More
S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, connecting to chowkhat as per site requirement and as specified and as directed.
37.62
-
-
... More
S&F 30 mm thick 2nd class hard wood wire gauged shutters, open rebated and prepared to receive wire gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire gauge, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.
12.54
-
-
... More
S&F for aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
6
-
-
... More
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
141
-
-
... More
S&F 200 mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
64
-
-
... More
S&F 100 mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
30
-
-
... More
S&F Extruded aluminium alloy handle, cast type 150 mm size, complete all as specified and directed.
64
-
-
... More
S&F Extruded aluminium alloy handle, cast type 100 mm size, complete all as specified and directed.
45
-
-
... More
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of length 150 mm, complete all as specified and directed.
24
-
-
... More
S&F 300 mm aluminium, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.
21
-
-
... More
S&F 200 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.
15
-
-
... More
S&F Anodised Aluminium powder coated (Minimum thickness of powder coating 50 micron thick) Sections for Partitions, Windows and door with frame and shutter fully or partly glazed, sliding / openable / fixed with panel inserts of 4.8mm thick sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles including taking down existing aluminium window/door/partition of any description: the size of aluminium sections shall be all as specified in relevant IS code and SSR Part-I, complete all as directed. Notes: (i) Supply and fixing of panel inserts of glass/gauze will be measured and paid separately (ii) Weight of aluminium sections only shall be accounted for payment purpose. However unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as handles complete all as specified and as directed.
450
-
-
... More
S & F 4.8 mm Sheet glass ordinary quality and glazing with oil putty in square n exc 1.0 Sqm in each pane with solar control film 25 microns reflective type sticked to glass panes as per instruction of manufacturers, complete all as specified and directed.
45
-
-
... More
S&F Aluminium powder coated grill of make "Deco grill" and DG - 104 model with aperture of size 102 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and securing the frame to masonry wall with brass screws, complete all as specified and directed.
60
-
-
... More
S&F PVC ventilators with frame work made of multi chamber hollow PVC section DWUF 405 (40X46mm). The glass (3mm thick pin headed) is fixed to the frame in the lower section using extruded PVC section having a dimension of 9mm X 14.5mm (GL-19 SINTEX PVC section) with EPDM gasket (SPL-003) for both the PVC sections. SINTEX make ventilator's centre mullion made up of multi chamber hollow PVC section DWUF-406 (63.5mmX40mm) with EPDM gasket is used. GL-19 is fixed to the 3 sides of DWUF-405 and to one side of DWUF 406 (63.5X40mm) above the centre mullion. Glass panels with aluminium lower set is fixed to the frame DWUF-405 on the top of the ventilator for the glass. DWUF 405 and DWUF 406 corners shall be metre cut and welded, jointed with 12 mm MS rods (guard bars) and necessary, complete all as specified and directed.
8
-
-
... More
S&F in repair Aluminium body door closure hydraulically regulated, designation No1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixed, complete all as specified and directed.
25
-
-
... More
S&F 18/19 mm thick prelaminated particle board, interior grade, as in cup board shutter double leaf prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.
45
-
-
... More
S&F of brass cup board lock 75mm size 4 lever with duplicate keys and as per site requirement, complete all as specified and as directed.
15
-
-
... More
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanized for 40 mm width of flaps fixed with screws complete all as specified and directed.
45
-
-
... More
S&F 100 mm hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and as directed.
15
-
-
... More
M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub-base flooring, complete all as specified and as directed.
362
-
-
... More
M&L for 75 mm thick Cement Concrete type C-2 (1:3:6) (using 40mm graded crushed stone aggregate), as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
60
-
-
... More
M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.50 mm graded aggregate) as in sub base of floor, finished even and smooth without using extra cement, complete all as specified and as directed.
600
-
-
... More
S&F glass dividing strips, 3mm thick 38mm width inserted in position confirm to design, complete all as specified and directed.
32
-
-
... More
M&L for Vitrified Tiles, Double Charged, Coloured, Premium Quality, of size exceeding 0.36 Sqm and not exceeding 0.42 Sqm, 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile, over and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4, complete all as specified and as directed.
Note: The colour, shade and design of tiles shall be as approved by GE/AGE (I).
600
-
-
... More
S&F non skid ceramic coloured floor tiles 300x300x7 to 8mm thick etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor make including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4, all as specified and directed.
100
-
-
... More
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick / 600 x 300 x 7 mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with the colour of tiles, fixed over and incl 10mm thick rendering in cement mortar 1:3, complete all as specified and directed.
285
-
-
... More
M&L for 18 to 20 mm thick Granite stone slabs (colour / shade, design / pattern as approved by GE), as in floors and treads of steps / Counter Tops for wash basins for wall lining (veneering to wall) etc., including making holes and rounding exposed edges, with machine cut edges, rubbed and pre-polished to smooth mirror finish all to required sizes, set and bedded with grey cement [slurry] and jointed and pointed with white cement slurry mixed with a admixture of pigment to match shade of granite slabs, including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4, complete all as specified and as directed.
80
-
-
... More
Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc., including machine polishing to edge to give high gloss finish etc complete all as directed.
10
-
-
... More
Supply and laying 60mm thick factory made chamfered edge precast glazed cement concrete paver block of M-35 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
NOTE: Cost of sand cushioning shall be deemed to be included in the quoted rate.
250.5
-
-
... More
Supply and fixing 20 mm thick pre-polished decorative cement concrete tiles of size 300mm x 300mm, as in flooring over and including 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed by Engineer-in-Charge.
111
-
-
... More
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with all necessary accessories /adhesives & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement as specified and directed.
160
-
-
... More
S&F 10 to 12mm thick gypsum board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended form the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fastener with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces, with and including taking down old unserviceable false ceiling of any description, complete all as directed.
300
-
-
... More
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
8
-
-
... More
S&F mild steel framed work such as grills gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work or water tanks and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.
60
-
-
... More
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water etc., including dismantling of lightening strip and re-fixing the same in position after roof treatment and removal of debris out of MD land, complete all as specified and as directed.
Note: Dismantling and refixing of the lightening strip shall be deemed to be included in the quoted rate.
500
-
-
... More
M&L for brushing cement slurry @ 2.75 Kg/Sqm over cleaned roof surface prior to application of concrete, complete all as directed by Engineer - in - charge .
500
-
-
... More
M&L for Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), thickness as required at site, as in roof padding, finished even and fair complete all as specified and directed.
12.5
-
-
... More
M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed.
(NOTE: WPC will be measured and paid separately)
500
-
-
... More
M&L for water proofing treatment on existing cleaned on RCC accessible roof with the following specifications and manufacturer's instruction complete all as specified and directed :-
(i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966.
(ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm.
(iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction.
(iv) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.
(v) Hydraulically pressed cement concrete tiles 200 X 200 X 22 mm size conforming to IS 1237-1980 shall be laid on 15 mm thick cement sand mortar 1:4, jointed and pointed in cement sand mortar 1:3 [joint thickness not exceeding 5mm].all as per manufacturer's instructions and as directed.
500
-
-
... More
Chipping of unsound/weak concrete material of 50 to 70mm average thickness with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc., and disposal of debris at any lead and lifts out of MD land, completed all as directed by Engineer-in-charge.
25
-
-
... More
Cleaning the existing rebar by emery paper providing two coats on the exposed reinforcement with a single component liquid that removes rust and prevents further rusting of steel and any other RCC structural member including materials and manpower and machinery etc., completed as per the direction of Engineer-in-charge Supply, application, surface preparation shall be followed as per manufacture data sheet and instructions. Scope of work shall be including supply of materials, application, manpower, machinery, tools, consumables etc., completed all as directed by Engineer-in-charge.
MAKE: SIKA-SIKA RUSTOFF 100 or Equivalent
12
-
-
... More
Supply and application of two coats of anti-corrosion primer of approved product by the engineer-in-charge, as per manufacturers recommendation to the exposed steel reinforcement /steel including manpower, brushes etc., complete all as directed. MAKE: SIKA-SIKA Friazinc R or Equivalent
12
-
-
... More
M&L for Providing, mixing and applying bonding coat of approved Epoxy bonding adhesive having coverage 2.20 Sqm/kg of approved make and as per manufacturer specifications on chipped portion of R.C.C surfaces, Complete all as specified and directed by Engineer-in-Charge. MAKE:SIKA-SIKA LATEX/SIKAGARD 551 ELASTICPRIMER /SIKADUR 32LP /32 or Equivalent BASF-MASTER EMACO SBR2
25
-
-
... More
Supply and apply a pre-batched one component polymer modified protective mortar. (PMPM) for Repair of cracks in Walls after chipping of complete unsound/weak mortar on wall with manual chisel or any machinery tools, complete completed all as directed by Engineer-in-charge.
MAKE: SIKA-SIKA TOP-122 ITS/ SIKA LATEX/ SIKA MONO TOP 122F or Equivalent BASF-MASTER EMACO SBR2
Note: Scope of work shall be including supply of materials, application, manpower, machinery, tools, consumables, curing etc., shall be deemed tobe included in the quoted rates.
55
-
-
... More
Supply and apply a pre-batched one component polymer modified concrete for Repair of spalling and damaged concrete in RCC structure and superstructure works. Scope of work shall be including supply of materials, application, manpower, machinery, tools, consumables, curing etc., completed all as directed by Engineer-in-charge.
MAKE: SIKA-SIKA REP MICROCONCRETE4 or Equivalent BASF- MASTER FLOW 718
1.8
-
-
... More
Supply and Providing extra Corrosion resistant TMT reinforcement bars 10mm dia and over, at the area where corrosion has gone above 25 % with proper over lapping by using welding or lapping on existing system and placing in position, at any height & depths, of high strength deformed weldable quality reinforcement bars of grade Fe 500 higher grade conforming to IS:1786 (latest version) as per drawings for RCC structures, straightening, cleaning, cutting, bending ,welding to required shape and length as per details, double binding wire with contractor's own 16 SWG black soft annealed binding wire, welding if required to form a rigid cage and placing with proper cover block, supports, chairs, spacers etc., complete all as directed.
100
-
-
... More
Drilling 10 mm dia., upto 300mm deep holes in structural members horizontally and vertically in staggered manner at the intervals as per specification and drawing. Clean the holes by air blower prior to fixing nozzles and Insert 8 mm dia. copper nozzles in holes with the help of approved product for repair work and strengthening work of existing structure, materials, machinery and manpower include etc., completed all as directed by Engineer-in-charge.
Note: Supply, application, surface preparation shall be followed as per manufacture data sheet and instructions. Scope of work shall be including supply of materials, application, manpower, machinery, tools, consumables etc., shall be deemed to be included in the quoted rates.
516
-
-
... More
Supply and successful application depends on very careful preparation of surface. The surface shall be treated must be structurally sound, free from standing water, oil, grease, surface contaminants. Dirt, dust and other foreign materials must be removed. Concrete which is fully contaminated with oil / grease must be removed to the depth of sound & uncontaminated concrete. Impregnation shall be applied with a paint brush or roller until complete saturation of the substrate is achieved. Cracks are sealed by pouring mixed in charge approved product and directly from the mixing vessel between two “dams” made from approved Product by Engineer-in-charge. Injection flange / nipples to be fixed along the crack line at an approximately 25 cm Centre-to-Centre distance with Engineer in charge approved product. Crack mouth should be opened and sealed (sealing of cracks payment shall be excluded). As soon as injection resin oozes out of the next injection port, the first one is sealed and injection process is continued from next port. For horizontal crack, injection should start from any of the ends and to be continued and completed till the last port is used. For vertical crack, injection should start from the lowest port and continued upwards. After completion of the injection process, the injection ports as well as the sealing materials between the ports shall be removed. Maximum width of cracks to be injected: 5 mm, Complete all as specified and directed by Engineer-in-Charge. Note: Scope of work shall be including supply of injection materials, application, manpower, machinery, tools, consumables etc., shall be deemed to be included in the quoted rates.
420
-
-
... More
Supply and applied on the prepared surface with proper roller to remove air voids after application with SikaDur-330 or Fosroc or approved product an epoxy adhesive as per specification suggested by M/S Sika India Pvt Limited or Fosroc or approved product
Product: Sikadur®-330 is a solvent free, thixotropic epoxy based impregnating resin / adhesive for low density fabric for base and top coat. Consumption: approx.1.6 kg/m2.
Product requirements: heat distortion temperature = 62 ºC curing at 30ºC according to ASTM D 648; tensile strength = 30N/mm2 according to ISO 527; bond strength 4 N/mm2 or concrete failure according to ASTM C 882, SikaWrap 230C is a stitched, one directional, high strength CFRP fabric with tensile strength (nominal) = 4000N/mm2; tensile E –modulus = 2.3x105 N/mm2; elongation at break (nominal): 1.7%; fabric design thickness = 0.129mm (based on carbon fibre content only), Complete all as specified and directed by Engineer-in-Charge. Note: Scope of work includes Supply of materials, application, surface preparation before and after wrapping includes sand blasting shall be followed as per manufacture data sheet and instructions, manpower, machinery, special tools, consumables etc., shall be deemed to be included in the quoted rates.
200
-
-
... More
Supply and applied on the prepared surface with proper roller to remove air voids after application with SikaDur-330 or forsac or approved product an epoxy adhesive as per specification suggested by M/S Sika India Pvt Limited or its equivalent makes as specified in the particular specifications. Product: Sikadur®-330 is a solvent free, thixotropic epoxy based impregnating resin / adhesive for low density fabric for base and top coat.
Consumption: approx.1.6 kg/m2. Product requirements: heat distortion temperature = 62 ºC curing at 30ºC according to ASTM D 648; tensile strength = 30N/mm2 according to ISO 527; bond strength 4 N/mm2 or concrete failure according to ASTM C 882, SikaWrap 450C is a stitched, one directional, high strength CFRP fabric with tensile strength (nominal) = 4000N/mm2; tensile E –modulus = 2.3x105 N/mm2; elongation at break (nominal): 1.7%; fabric design thickness = 0.22mm (based on carbon fibre content only), Complete all as specified and directed by Engineer-in-Charge. Note: Scope of work includes Supply of materials, application, surface preparation before and after wrapping includes sand blasting shall be followed as per manufacture data sheet and instructions, manpower, machinery, special tools, consumables etc., shall be deemed to be included in the quoted rates.
63
-
-
... More
Supply and applied on the prepared surface with proper roller to remove air voids after application with SikaDur-330 & Sikadur 300 an epoxy adhesive as per specification suggested by M/S Sika India Pvt Limited or its equivalent makes as specified in the particular specifications.
Sika Wrap 600C is a Stitched unidirectional carbon fibre fabric, designed for structural strengthening applications as part of the Sika® strengthening system. with tensile strength (nominal) = 3800N/mm2; tensile E – modulus = 2.42x105 N/mm2; elongation at break (nominal): 1.55%; fabric design thickness = 0.331mm (based on carbon fibre content only).
Sikadur®-330 /Sikddur513 is a solvent free, thixotropic epoxy based impregnating resin / adhesive for low density fabric for base and top coat. Consumption: approx.1.5 kg/m2. Product requirements: heat distortion temperature = 62 ºC curing at 30ºC according to ASTM D 648; tensile strength = 30N/mm2 according to ISO 527; bond strength 4 N/mm2 or concrete failure according to ASTM C 882 Sikadur®-300 is a solvent free, thixotropic epoxy based impregnating resin / adhesive for low density fabric for base and top coat.
Consumption: approx.1kg/m2. Product requirements: heat distortion temperature = 52 ºC curing at 30ºC according to ASTM D 648; tensile strength = 45N/mm2 according to ISO 527; bond strength 4 N/mm2 or concrete failure according to ASTM C 882, Complete all as specified and directed by Engineer-in-Charge. Note: Scope of work includes Supply of materials, application, surface preparation before and after wrapping includes sand blasting shall be followed as per manufacture data sheet and instructions, manpower, machinery, special tools, consumables etc., shall be deemed to be included in the quoted rates.
63
-
-
... More
Supply and applied on the prepared surface with proper roller to remove air voids after application with SikaDur-330 or Fosroc or approved product an epoxy adhesive as per specification suggested by M/S Sika India Pvt Limited or its equivalent makes as specified in the particular specifications.
Product: Sika® CarboDur® S-512
Product requirements: approved by Fib, technical report, E-modulus: 1.65x10^5 N/mm2; tensile strength =2800 N/ mm2; strain at break 1.69%; temperature resistant 100oC. Width = 50mm and 1.2 mm thick Along with supply and apply a solvent-free, epoxy based, thixotropic, structural two-part adhesive for plate bonding. Product: Sikadur®-30 LP (IN).Compressive Strength 90 N/mm2 (7 days) according to ASTM C579; Shear Strength 10 N/mm2 (7 days at 250C) according to FIP 5.15; Bond Strength = 2.5 N/mm2 according to EN1542, Complete all as specified and directed by Engineer-in-Charge. Note: Scope of work includes Supply of materials, application, surface preparation before and after wrapping includes sand blasting shall be followed as per manufacture data sheet and instructions, manpower, machinery, special tools, consumables etc., shall be deemed to be included in the quoted rates.
4.5
-
-
... More
GENERAL NOTES FOR ITEM NO. 88 TO 100 :-
(i) The work shall be got executed through authorised applicator of the chemical manufacturers. Necessary documents to this effect shall be obtained from manufacturer and submitted to the Engineer-in-Charge before execution of work.
(ii) Contractor shall provide additional manpower, resources, preparatory work etc. required for execution of the work as required by the authorised applicator, includes necessary scaffolding /support system and safety measures for repair work. (iii) Quoted rates are deemed to be inclusive of the above aspects. No extra claim shall be admissible during execution of work on this account.
-
-
-
... More
M&L for preparing old or new surfaces on walls/ceilings by brooming down or by steel wire brushing and applying three coats of white wash, all as specified and directed.
90
-
-
... More
M&L for applying 2 mm thick wall care putty on walls / ceilings to obtain a smooth surface including preparation of surface and making good any undulations on the surfaces, complete all as specified and directed.
2595
-
-
... More
M&L for Preparing old plastered surfaces of Walls / Ceilings / false ceiling and applying one coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as directed.
3368
-
-
... More
M&L for Preparing new plastered surfaces of Walls/Ceilings and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of suitable primer as per manufacturer's specification, complete all as directed.
Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux
865
-
-
... More
M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality), complete all as specified and directed
411
-
-
... More
M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic Enamel Paint (First quality) over a coat of pink primer, complete all as specified and directed.
80
-
-
... More
M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (First quality), complete all as specified and directed.
220
-
-
... More
M&L for Complete removal of existing treatment on old plastered surfaces of walls and applying one coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as recommended by the manufacturer all as specified and as directed.
(Note: Rate shall be included for necessary scaffolding and safety measures where required at site ).
2315
-
-
... More
M&L for preparing new plastered surfaces of walls and applying Two coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as recommended by the manufacturer all as specified and as directed.
(Note: Rate shall be included for necessary scaffolding and safety measures where required at site ).
930
-
-
... More
Taking up or down GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :-
-
-
-
... More
15mm bore
40
-
-
... More
20mm bore
150
-
-
... More
25mm bore
200
-
-
... More
40mm bore
120
-
-
... More
50mm bore
50
-
-
... More
Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-
-
-
-
... More
15mm bore
40
-
-
... More
20mm bore
150
-
-
... More
25mm bore
200
-
-
... More
40mm bore
120
-
-
... More
50mm bore
50
-
-
... More
S&F Gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed for the following size of pipes :-
-
-
-
... More
20mm bore outer dia
2
-
-
... More
25mm bore outer dia
4
-
-
... More
40mm bore outer dia
4
-
-
... More
50mm bore outer dia
2
-
-
... More
Disconnecting existing water tanks exc 500 & n.exc 1000 ltr of capacity, setting aside (or lowering if required) for repairs, etc and hoisting if required re-connecting and re-fixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc all and writing date of cleaning & Year with synthetic enamel paint, complete all as specified and directed. (Note : Date of cleaning deemed to be include in quoted rate).
2
-
-
... More
Dismantling of water tanks exc 250 but not exc 500 ltrs including all connections and fittings, complete all as specified and directed.
2
-
-
... More
Dismantling of water tanks exc 500 but not exc 1000 ltrs including all connections and fittings, complete all as specified and directed.
6
-
-
... More
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I and writing CA No & Year with synthetic enamel paint, complete all as specified and directed.
2
-
-
... More
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I and writing CA No & Year with synthetic enamel paint complete all as specified and directed.
6
-
-
... More
S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms), complete all as specified and directed.
4
-
-
... More
S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms), complete all as specified and directed.
4
-
-
... More
S&F Vitreous China wash basin, white, flat back, size 550 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, with 32mm dia Brass Chromium Plated Waste Fitting, as in repairs, complete all as specified and directed.
15
-
-
... More
S&F in repairs Hand shower (health faucet) with CP flexible cord fixed on wall along with two way brass CP Bib cock type with handle, screwed down, screwed for 15mm bore iron pipe of quarter turn type, complete all as specified and directed.
15
-
-
... More
S&F in repairs vitreous China (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
15
-
-
... More
S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed, as in repairs, complete all as specified and directed.
15
-
-
... More
S&F in repairs 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed.
4
-
-
... More
S&F in repairs 25mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed.
4
-
-
... More
S&F in repair stop cock/angular cock 15 mm, fancy type, chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
30
-
-
... More
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
15
-
-
... More
S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
15
-
-
... More
S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe, complete all as specified and directed.
30
-
-
... More
Supplying and fixing in repairs stainless steel grating doom openable 100mm size (Minimum Weight 25 grams) with/without hole including fixing with white cement complete all as specified and directed.
30
-
-
... More
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
12
-
-
... More
S&F in repairs Soap dish, vitreous China white, approximate size 160 x 160 x 90 mm fixed to plugs with chromium plated brass screws, complete all as specified and directed.
12
-
-
... More
S&F Acrylic bathroom cabinet box with mirror, shutter type of size 18" x 15" including taking down old one, complete all as specified and directed.
5
-
-
... More
Supply and fix in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial ply wood including provn for hanging clips, complete all as specified and directed.
15
-
-
... More
S & F in repairs Corner glass/sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.
15
-
-
... More
S & F in repairs 15/20mm SS towel rail 600mm long fixed with & incl chromium plated brass screws and wooden/plastic cleats ( minimum wt 190 gms) and as per site requirement, complete all as specified and directed.
15
-
-
... More
S&F in repair SS curtain rails/hanger rods of 15/20mm dia with fixing brackets, stops, rollers etc. as per site requirement, complete all as specified and directed.
60
-
-
... More
S & F in repairs SS towel rings round/circular 150mm dia or as per site requirement and match with existing product, complete all as specified and directed.
15
-
-
... More
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.
234
-
-
... More
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary scaffolding upto any height, complete all as specified and directed.
180
-
-
... More
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary scaffolding upto any height, complete all as specified and directed.
186
-
-
... More
S&F 110mm bore PVC (SWR) bends of any radius with access door.
60
-
-
... More
S&F 75mm bore PVC (SWR) bends of any radius with access door.
18
-
-
... More
Demolition and breaking up drain pipes of 150 mm bore RCC/SGSW set in cement mortar including earth work and removing the debries to a distance n exc 100m,where directed
120
-
-
... More
M&L for 150 mm bore double wall corrugated (profiled) SN4 drain pipes laid in trenches and jointed as specified.
120
-
-
... More
PCC 1:3:6 type C-2 (using 20mm graded stone aggregate ) in concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore.
120
-
-
... More
M&L for Corrosion resistant TMT bars 10mm dia and over cut to length bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed.
385
-
-
... More
M&L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) Set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) challah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary forms, moulds, etc complete all as specified and as directed.
4
-
-
... More
Plain Cement Concrete Type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section, complete all as specified and directed.
0.35
-
-
... More
PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in foundation, filling and mass concrete in surface channel, complete all as specified and directed.
28
-
-
... More
Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends
etc.
125
-
-
... More
Supply and erect/construction of LLDPE modular Vertical / Horizontal Septic Tank 30 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC as per OEM recommendation or as approved by GE and earthwork shall be included in quoted rate.
2
-
-
... More
SCHEDULE 'A' (INTERNAL ELECTRIFICATIONS)
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.
210
-
-
... More
M&L for concealed type point wiring with 1.50 Sqmm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (including Modular type MS flush box and modular cover plate with frame), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sqmm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed.
(NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same.
(ii) Quoted rate shall be inclusive of the cost of Modular type MS flush box and modular cover plate with frame.
(iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
378
-
-
... More
All as per item No.155 here-in-before, but for One light point controlled by two 2 - way switches (including Modular type MS flush box and modular cover plate with frame), for mounting MODULAR TYPE switches
12
-
-
... More
All as per item No.155 here-in-before, but for one 5 pin 5/6 amp socket out let point in the same switch board of light points (including Modular type MS flush box and modular cover plate with frame), fixed to walls/ceiling, for mounting MODULAR TYPE switches
70
-
-
... More
All as per item No.155 here-in-before, but for one 5 pin 5/6 amps multi socket outlet point in independent board (concealed wiring) (including Modular type MS flush box and modular cover plate with frame), fixed to walls/ceiling, for mounting MODULAR TYPE switches
70
-
-
... More
All as per item No.155 here-in-before, but using 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 2.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (including Modular type MS flush box and modular cover plate with frame), fixed to walls/ceiling, for mounting MODULAR TYPE switches
70
-
-
... More
S & F Modular Switch 1 way, 6 Amps, 1 module complete all as specified and directed.
514
-
-
... More
S & F Modular Switch 2 way, 6 Amps, 1 module complete all as specified and directed.
24
-
-
... More
S & F Modular Switch 1 way, 16 Amps, 1 module complete all as specified and directed.
70
-
-
... More
S & F Modular Socket 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
140
-
-
... More
S & F Modular Socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
70
-
-
... More
S & F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
58
-
-
... More
S & F Modular Bell push 6 Amps, 1 module complete all as specified and directed.
4
-
-
... More
S & F Modular Blank plate, 1 module complete all as specified and directed.
4
-
-
... More
S&F new Call bell, ding dong type, AC 230/240 Volts, single pole complete all as specified and directed.
4
-
-
... More
S&F ceiling rose surface, polycarbonate/Bakelite, three terminals complete all as specified and directed.
374
-
-
... More
Supply and fix double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
10
-
-
... More
Supply and fix double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
8
-
-
... More
Supply and fix double door metallic sheet metal enclosure for DB when MCBs to be used TPN 4 ways, 415 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
4
-
-
... More
Supply and fix double door metallic sheet metal enclosure with Incomer MCCB ,VTPN 12 ways, 415 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
4
-
-
... More
Supply and fix, testing of MCB SP 240 Volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs.
135
-
-
... More
Supply and fix, testing of MCB SPN 240 Volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs.
42
-
-
... More
Supply and fix, testing of MCB TPN 415 Volt 40-100 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs.
6
-
-
... More
Supply and fix, testing of MCB TPN 415 Volt 100 Amp 16 KA capacity having C-curve characteristics connected with suitable lugs.
4
-
-
... More
M&L for sub main wiring with 4 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 Sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 Sqmm as earth continuity conductor drawn through and including concealed PVC conduit of suitable size, surface type complete all as specified and directed.
(NOTE : Five runs of single core 10.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
250
-
-
... More
All as per Srl. Item No. 178 above, but with two runs of 6.0 Sqmm cable and one run of 6.0 Sqmm as earth continuity conductor in concealed PVC conduit
(NOTE : Three runs of single core 6.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
450
-
-
... More
All as per Srl. Item No. 178 above, but with two runs of 4.0 Sqmm cable and one run of 4.0 Sqmm as earth continuity conductor in concealed PVC conduit
(NOTE : Three runs of single core 4.0 Sqmm cable & one run of concealed PVC conduit shall be measured as one unit)
300
-
-
... More
S&F surface mounted LED luminaire, 1 X 20 Watt, decorative box type, in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate diffuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt
(b) CRI not less than 80, (c) THD 20%
(c) having in built short circuit and surge protection
(d) colour temperature not less than 5700 degree K
(e) life not less than 25000 hours of operation
167
-
-
... More
All as per item No. 181 above, but of 1 X 9/10 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt
53
-
-
... More
S&F recess mounted slim-fit downlighter, 100 lumen/watt, round or square, having glare free frosted diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 12 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed.
10
-
-
... More
S&F recess mounted LED luminaire, of size 600 mm x 600 mm, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 35/36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed and complying with the following specifications:-
(a) minimum efficacy 110 lumen/watt
(b) CRI not less than 80, (c) THD 20%
(c) having in built short circuit and surge protection
(d) colour temperature not less than 5700 degree K
(e) life not less than 25000 hours of operation
(f) Weather protection: IP20
50
-
-
... More
S&F LED Street Light fitting, 35 Watt, 240 Volts, in pressure die cast aluminium housing with lens and toughened glass cover with integrated constant current electronic driver, having ingress protection of IP 66 and impact resistance of IK 07 complete all as specified and directed and complying with the following specifications:-.
(a) minimum efficacy 105 lumen/watt
(b) CRI not less than 70, (c) THD 10%
(c) having in built short circuit and surge protection upto 4 kV
(d) colour temperature not less than 5700 degree K
(e) life not less than 50,000 hours of operation
(f) Power factor 0.95
(NOTES: (1) List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire provided comply with the aforesaid specifications. No claim shall be entertained during currency of work..
(2) Wire for electric connection of new fitting and new GI pipe bracket shall be measured & paid separately.
18
-
-
... More
M&L for GI Pipe Bracket made out of Galvanised Iron Tubing 32/40mm bore (dia), light grade, 1.50 Metre long fixed with 02 sets of flat iron clamp of size 25mm x 5 mm, with bolts, nuts and washers of suitable size including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer incl taking down existing bracket complete all as specified and as directed by the Engr-in-Charge.
58
-
-
... More
Supply and Hanging, ceiling fan, with brushless DC motor, 1200 mm sweep, BLDC 5 Star rated with five years warranty, down rod, canopy, fan blades and accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan including dismantling existing fan complete all as specified and directed.
(MAKE : HALONIX, Model: PLASMA BLDC/ CROMPTON, Model : EENERGION GOOVE /BAJAJ, Model: SKU-251100-Emergps 28W 1200mm CF / ORIENT, Model: HECTOR 500 / HAVELLS, Model: Efficiencia Neo/ USHA, Model No.ENERGIA)
NOTES:
(i) Old fan, if any taken down, shall be deposited by contractor in MES store yard.
(ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan.
(iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
58
-
-
... More
S&F Exhaust fan 300 mm sweep, 1400 RPM, heavy duty, AC Single Phase 230/240 volts, metal body with louvers and vents, long life span, durable finish, weather-resistant, corrosion-resistant, performance consistency, square or round as per site requirement complete with all accessories and connecting up including and PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 Core, 1100 Volts grade, from ceiling rose/ connector to fan, including necessary scaffolding, safety and protective measures at any height of building, complete all as specified and directed.
(MAKE : HAVELLS, Model: Turbojet SP / CROMPTON, Model: EXHD300-4-1 /USHA, Model No.300mm S. PHTURBOHDEF 1400 RPM ISI/ Bajaj, Model: SKU70068 or equivalent model in ORIENT)
NOTES: (i) Old fan, if any taken down, shall be deposited by contractor in MES store yard.
(ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan.
(iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
18
-
-
... More
S&F MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed.
(NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)
17
-
-
... More
SCHEDULE 'A' (EXTERNAL ELECTRIFICATIONS)
Supply, Laying and testing LT XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary aluminium thimbles, jointing and testing complete of the following sizes and cross sectional area :- (Note : Necessary earth work to be measured and paid separately under respective items).
-
-
-
... More
50 Sqmm, 3.5 Core
200
-
-
... More
120 Sqmm, 3.5 Core
250
-
-
... More
150 Sqmm, 3.5 Core
350
-
-
... More
M&L for un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40m complete with MES marking on the top of the cover complete all as directed.
3413
-
-
... More
M&L for sand cushioning / sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.
Note: For the purpose of payment, punned thickness of sand cushioning only shall be measured.
52
-
-
... More
S&F in repair 50 mm bore galvanized iron pipe "light grade" with all fittings, laid in trenches or under roads / floors / culverts and / or fixing to electric poles with suitable size mild steel flat iron clamps, bolts, nuts & washers etc., complete all as specified and as directed.
12
-
-
... More
S&F in repair 40 mm bore galvanized iron pipe "light grade" with all fittings, laid in trenches or under roads / floors / culverts and / or fixing to electric poles with suitable size mild steel flat iron clamps, bolts, nuts & washers etc., complete all as specified and as directed.
32
-
-
... More
Supply, install, commissioning and testing of indoor type LT Panel Board, cubical type, dust and vermin proof, suitable size, made out of 3.15 mm thick CRCA sheet, factory fabricated of CPRI approved manufacturer, with front openable door (with locking arrangement) and making compartment for each MCCB / Change over switch separately, cabinet and all members chemically treated with MSR solution for anticorrosive treatment and powder coated (shade RAL-7032) and inclusive of four numbers aluminium bus bar of 600 Amps capacity (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland) and two numbers Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS angle frame of size 40X40X6mm with legs not more than 60cm, fixing in position by provision of plate form with PCC 1:2:4 type B-1, brick work including fixing of tiles to match with the existing floor surface and any addition / alternation as required at site for errection of LT panal and to accomidate, supply and fixing of the following accessories and including taking down Old Panel, complete all as specified and directed by Engineer-in-Charge. (Location: P-1 Bldg)
1
-
-
... More
(Item No. 195.00 contd..) Incoming:- (a) MCCB 500 Amps, 4 Pole, 415 Volts breaking capacity 50 KA - 01 No. Out Going:-
(a) MCCB 100 Amps, 4 Pole, 415 Volts breaking capacity 25 KA - 5 Nos. (b) MCB TPN 40 Amps, 415 Volts breaking capacity 10 KA - 01 No. (c) MCB 4 Pole 63 Amps, 415 Volts breaking capacity 25 KA - 01 No. (d) Digital Volt meter of range 0 to 500 Volts with selector switch - 01 No
(e) Digital Ammeter of range 0 to 200 Amps with selector switch and suitable CTs - 01 Set
(f) LED indicating Lamp with holder for main supply & standby supply indicating RYB (Set of three) - 01 Set
-
-
-
... More
Supply, install, commissioning and testing of indoor type LT Panel Board, cubical type, dust and vermin proof, suitable size, made out of 3.15 mm thick CRCA sheet, factory fabricated of CPRI approved manufacturer with front openable door (with locking arrangement) and making compartment for each MCCB / Change over switch separately, cabinet and all members chemically treated with MSR solution for anticorrosive treatment and powder coated (shade RAL-7032) and inclusive of four numbers aluminium bus bar of 600 Amps capacity (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland) and two numbers Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS angle frame of size 40X40X6mm with legs not more than 60cm, fixing in position by provision of plate form with PCC 1:2:4 type B-1, brick work including fixing of tiles to match with the existing floor surface and any addition / alternation as required at site for errection of LT panal and to accomidate, supply and fixing of the following accessories and including taking down Old Panel, complete all as specified and directed by Engineer-in-Charge. (Location: P-3 Bldg)
1
-
-
... More
(Item No. 196.00 contd..) Incoming:- (a) MCCB 250 Amps, 4 Pole, 415 Volts breaking capacity 50 KA - 01 No. Out Going:-
(a) MCCB 100 Amps, 4 Pole, 415 Volts breaking capacity 25 KA - 3 Nos.
(b) MCB TPN 40 Amps, 415 Volts breaking capacity 10 KA - 01 No. (c) MCB Cap 63 Amps, FP 415 Volts breaking capacity 25 KA - 01 No.
(d) Digital Volt meter of range 0 to 500 Volts with selector switch - 01 No
(e) Digital Ammeter of range 0 to 200 Amps with selector switch and suitable CTs - 01 Set
(f) LED indicating Lamp with holder for main supply & standby supply indicating RYB (Set of three) - 01 Set
-
-
-
... More
M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 32 X 6 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing, complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.
26
-
-
... More
Supply and fixing Earth Continuity G I strip 32 x 6 mm for extension of earth and connected to equipment or panel complete all as specified and directed by Engineer-in-Charge.
32
-
-
... More
S&F aluminium strip 25 mm X 3.15 mm with saddles, porcelain/FRP insulators @ 1 metre c/c and fixing screws etc., for roof conductors and down conductors above ground complete all as specified and directed.
511
-
-
... More
S&F in repair air termination, single pointed copper rod, 12 mm dia and 300 mm long, fixed on GI pipes with earthing strips for earth conductivity to ground complete all as specified and directed.
(NOTE: GI pipe & earthing strip shall be measured and paid separately)
30
-
-
... More
S&F in repair test point terminal block, made of gun metal or phosphorous bonze of size 75 mm X 75 mm X 25mm, drilled and screwed including 3 Nos, 8 mm dia and 25 mm long hex screws complete all as specified and directed.
8
-
-
... More
S&F porcelain insulators of size 50 mm with fixing arrangements complete all as specified and directed.
90
-
-
... More
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs -------------- mentioned on Page No 20 shall be deducted from the total quoted amount of BOQ.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements