Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Security and Emergency Services
Eprocure
Opening Date23 Oct 2024
Closing Date6 Nov 2024
Tender Amount₹ 8,06,00,000
Costs
EMD
₹ 7,28,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Demolition And Construction Boundary Wall Alongwith Concertina Coil
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671544_2Bid Award Id
ViewTender No
85440Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation in all kind soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m as directed.
6440
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift exc 1.5m but not exc 3.0m, as directed.
568
-
-
Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified and directed.
512
-
-
Excavation in trenches not exc.1.5m wide and exc 1.5 m but not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified and directed.
4
-
-
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.
290
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
2899
-
-
Removing excavated surplus soils not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
172
-
-
Removing excavated material exc. 250m but n exc. 500m and depositing where directed at a level n exc.1.5 m above the starting point in soil complete all as specified as directed
5299
-
-
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation, mass concrete etc complete all as specified.
429
-
-
M&L for PCC 1:3:6 Type C1 (20mm graded aggregate) in foundation filling and mass concrete complete all as specified.
301
-
-
M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.
14
-
-
M&L for PCC 1:3:6 type C-1 using 20 mm graded aggregates as in copings, kneelers, apex stones, bed plates, water throughs and like incl weathering, slightly rounded or chamfered angles and throating incl necessary formwork complete all as specified and directed.
16
-
-
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels/drains and benching including finishing top of benching even and smooth using extra cement complete all as specified and as specified.
64
-
-
M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) for coping above ground level of steel tubular pole complete all as specified and directed.
0.5
-
-
M&L for precast cement concrete solid block masonry 1:3:6 type C1 using 20 mm graded aggregate) exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.
472
-
-
M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius and built in CM 1:6 complete all as specified and as directed.
624
-
-
M&L for 15mm thick rendering in CM 1:4 on brick masonary surfaces (other than fair faces) finished even and fair without using extra cement complete all as specified.
Note: 1st layer 10 mm thk and 2nd layer 05 mm thk shall be done in two satges. AGE sall ensure plastering work shall be done in two layers.
2656
-
-
M&L for rendering 15 mm thick plastering in CM 1:4 on on fair face of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified..
Note: 1st layer 10 mm thk and 2nd layer 05 mm thk shall be done in two satges. AGE sall ensure plastering work shall be done in two layers.
9383
-
-
M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and fair complete all as specified and directed. Note: 1st layer 10 mm thk and 2nd layer 05 mm thk shall be done in two satges. AGE sall ensure plastering work shall be done in two layers.
360
-
-
S&F RCC pipes 600mm dia, class NP3, laid and jointed complete with collars complete all as specified and as directed.
210
-
-
M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
127110
-
-
M&L for mild steel TMT bars 5 to 10mm dia cut to length, bend to shape including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for stirrups complete all as specified.
68090
-
-
M&L for RCC M-30 design mix in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
978
-
-
M&L for RCC M-30 design mix in columns complete all as specified and directed.
381
-
-
M&L for RCC M-30 design mix in beams over a span of 1.5 m complete all as specified and as directed.
196
-
-
M&L for RCC M30 design mix using 20 mm graded aggrete for retaining walls complete all as specified and directed.
151
-
-
M&L for form work to sides of concrete foundations, footings, sides and soffits of plinth beams and similar work for rough finished surface of concrete complete all as specified and as directed.
2510
-
-
M&L for form work to sides and soffits of RCC floor or roof beams, beam hunchings, girders and lintel exc. 1.50m spanning to plain rough finished surfaces of concrete all as specified and as directed.
2194
-
-
M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete all as specified and as directed.
5720
-
-
M&L for 200 mm thick (compacted thickness) Granular sub base (GSB) with grading V of 100 mm compacted thickness (laid in two layers of each, compacted separately) conforming to grading as specified and as required gradient and camber complete using necessary mechanical paver/grader & vibratory soil compactor of capacity 8-10 Tonne all as specified and as directed.
(a) Pavement shall be made for solid quantity arrived after consolidation.
(b) Compaction of granular sub base filling shall be carried out under optimum moisture condition to achieve 98.50 modified density.
(c) Curing shall be carried out as per IRC recommendations.
(d) Before execution of this item the approved material obtained from outside MoD land shall be tested/ checked for suitability to use.
671
-
-
M&L for WBM 200mm (compacted thick in two layers each, compacted seperately) of 100mm each with coarse aggregate of basalt/trap/ granite grading 1 (90mm to 40mm size), spread, rolled and consolidated gradient and camber required complete and rolled with tandom vibrator roller complete all as specified and directed.
671
-
-
Preparation of unsurfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed.
605
-
-
M&L for apply evenly a tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen of viscosity VG 10 complete all as specified and as directed.
605
-
-
M&L for Bituminous primex carpet semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% paving bitumen of viscosity VG 30 as binder content weight of total mix rolled and compacted to required camber and gradient complete all as specified and as directed.
605
-
-
M&L for painting lines, dashes, arrows, letters, etc. on road surface with hot applied retro reflective thermoplastic paint confirming to MORTH (Clause. 803.40) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C, including cleaning and drying the road surfaces to ensure dust, oil, grease and moisture free surface before applying paint n exc 10cm in width and colour confirming to BS 3262-1989 complete all as specified as directed
2860
-
-
S&F for solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125x125x25 mm (shank 65mm) of high efficiency monocrystalline solar panel 2.4V/0.3 Watt one NI-ed rechargeable battery (1.2V/1600 mA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Colour: Amber/Red/White
120
-
-
S&F cat eye reflective type of metal body alloy of size 100x100x20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions.
Colour: Amber/Red/White
572
-
-
M&L for 150mm thick moorum/red bajri spread, rolled and consolidated to gradient and camber required for berms complete all as specified and as directed.
144
-
-
M&L for providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apexstones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed.
22
-
-
M&L for preparing of new decorated surfaces applying 3 coat of white wash on walls including cornices complete all as specified and directed.
428
-
-
S&F MS flat iron fillets in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed.
1198
-
-
M&L MS frame work such as grills, grantings etc with ends of bars shouldered and or reviled, framed guard bars, barred iron doors ladders walk ways, raillings, frame work of water tanks and similar articles all as specified and as directed.
13215
-
-
S&F for MS round bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, complete all as specified and directed.
2469
-
-
S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm long but not exc 10cm complete all as specified and directed.
280
-
-
S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed.
190
-
-
M&L for preparation of new painted steel surfaces of any description, not exc10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.
464
-
-
M&L for preparation of new or previously untreated steel surface of any discription over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified.
505
-
-
M&L preparation of new plastered surface and applying two coats of cement based paint complete all as specified.
9383
-
-
M&L in preparation of new plastered or un plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
360
-
-
M&L for 25mm thick pre-formed filler for expansion joints all as specified and as directed.
71
-
-
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors for weep holes complete all as specified and as directed.
34
-
-
M&L for granular filling of gauge 40mm to 80mm deposited spread and levelled behind the retaining wall weep holes complete all as specified and as directed.
192
-
-
M&L for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed.
Note : punned thickness shall be measured for payment purpose
117
-
-
Supply and laying in trenches common burnt clay building brick, sub class B designation 75 complete all as specified & directed.
13
-
-
S&F steel tubular swaged poles type 410 SP-31 (9.0 m long) complete with CI base plate and finial taper plug including painting with two coat of aluminium paint over a coat of red oxide primer, complete all as specified and directed.
50
-
-
S&F hard drawn PVC Coated MS Galvanised steel wire chain link fencing of wire mess (Nominal Pitch of wire) not exc 100mm, plain wire, dia of each wire each way 2.5mm including line wires with standard rails strainings bolts etc. including provision of binding wire Complete all as specified and directed.
5280
-
-
S&F concertina coil made with razor barbed tape of 1050 mm dia fixed with clips etc all as specified and directed.
1500
-
-
M&L Steel gate 7.0 m wide with precast PCC block masonry pillar and foundation all as specified and shown on drg (TD/295 Sheet 1/2 and 2/2). Note: Excavation, PCC, PCC block masonry, coping and other details (except light fittings and provisions for light fittings) shown on drg will not be measured and paid seperately and is deemed to be included in the quoted rate and nothing shall be extra shall be paid.
1
-
-
S&F LED street light fitting 90 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resitant complete with driver, lamp bracket with inpact and corrosion resitant including bracket made of 40 mm dia GI light grade pipe of 1.2 m long bent to shape required fixed with suitable GI clamps, bolts, nuts and washer including thermal management in multiple optics complete with IP 65/66 protection all as specified and directed.
50
-
-
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm, 4 core complete all as specified and directed.
1850
-
-
M&L for 40 mm dia steel water tubes 'light grade' galvanised for cable protection including sealing both ends complete all as specified and as directed.
250
-
-
M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical Plate No 3, connected to earthing with DBs all as specified including char coal, rock salt, earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4, type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering, water funnel complete all as specified and testing on completion.
5
-
-
S&F loopin, loopout fuse junction box 155x210x92mm IP- 66 protection made out of PVC, weatherproof and locking screw, PVC connector 4 Way 32 Amps rating heavy duty mounted in the box fitting on steel tabular pole at a height not more than 1.0m above ground level with the help of GI clamps FI 20x3 mm two Nos and suitable nuts and bolts complete all as directed.
50
-
-
S&F time switches astronomical type programmable every 1 min, backup of 6 year 415 V three phase of 20 Amp rating with contactor fitted inside steel enclosure complete all as specified and directed.
2
-
-
Supply and laying or fixing or passing through PVC pipe, 1100 Volt grade cable 1.5 sqmm, 2 core with PVC flexible insulated unsheathed bright annealed bare copper wire all as specified and directed.
350
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements