Military Engineer Services Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Electrical Works
Eprocure
Opening Date11 Feb 2025
Closing Soon14 Mar 2025
Tender Amount₹ 35,60,00,000
Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Special Repairs Towards Replacement Of All Existing Meters With Smart Prepaid Meters Including Server
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676456_3Tender No
854471Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed
34
-
-
... More
All as per Serial Item No.3 above but except stone
5
-
-
... More
M&L for Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20 mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and as directed
204
-
-
... More
Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
327
-
-
... More
Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
159
-
-
... More
M&L for preparing newly plastered wall surface and applying two coats of washable distemper over a coat of alkali resistant primer complete all as specified and as directed.
159
-
-
... More
M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course complete all as specified and as directed.
43.2
-
-
... More
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10
Sqm over new surfaces complete all as specified and as directed.
432
-
-
... More
Taking down Chowkats or frames exceeding 1.5 Sq. M and not exceeding 4 Sq. M each (Without taking off shutters from the frame) including mongry complete all as specified and as directed.
5
-
-
... More
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frame) including mongry complete all as specified and as directed.
10
-
-
... More
Supply and fix M.S work as in bands, straps, support or stays for rain water pipes including bolts, if required hooks (stay), heavy, for large gates, hooks & pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps & hold fasts, wall ties,hooks for hanging fans and similar small articles conforming to Fe- 410-O or Fe 310-O complete all as specified and directed.
20
-
-
... More
M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate for fixing of hold fast complete all as specified and directed.
0.4
-
-
... More
S & F IInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
0.2
-
-
... More
S &F IInd class hard wood 35 mm thick factory made Plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
8
-
-
... More
S&F Flush shutters, ISI Marked solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
4
-
-
... More
S & F Factory made single rebated WPC (Wood Polymer Composite) solid door/ window frame /Chowkhat of size 65 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position complete all as specified and as directed.
14
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100
gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.
4
-
-
... More
S&F Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work complete all as specified and as directed.
4
-
-
... More
M&L for two coats of synthetic varnish liquid transperant over a coat of wood filler liquid transparent including preparation of new treated surface of wood over 10 cm width or girth complete all as specified and as directed.
7
-
-
... More
M&L for Preparing new wooden surfaces of any description exc 10 cm width or girth and applying one coat of pink primer and two coats of synthetic enamel paint complete all as directed.
30
-
-
... More
S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified.
27
-
-
... More
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified.
7
-
-
... More
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of the cover plate 150 mmcomplete all as specified.
7
-
-
... More
S&F 150 mm long ISI marked Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.
18
-
-
... More
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
18
-
-
... More
S & F Brass mortice latch with two levers (vertical type) of size 100 mm, 6 levers with 2 Keys complete all as specified and as directed.
Make : Godrej
3
-
-
... More
S&F 5.5 mm thick tinted glass selected quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.
9
-
-
... More
M&L powder coated Anodised aluminum grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles, mongry and fixing approved anodised aluminium standard section around the opening all complete as per requirement complete all as specified and as directed.
20
-
-
... More
S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, mongry, anodised aluminium snap beading, screws etc., complete all as specified and as directed.
12
-
-
... More
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e., at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws/ aluminium mongrey etc., complete all as specified and as directed. Note: Fittings shall be measured and paid separately.
Note for Serial item No. 30 to 32: The weight of aluminium sections shall only be measured for payment and other cleat angles, aluminium snap beading and aluminium mongrey shall be deemed to be included in the quoted rate.
45
-
-
... More
M&L for 3 to 4 mm thick plain or designed [as approved] coloured, aluminium composite panel as in wall cladding/ roofing/ panelling etc., including necessary frame work and fittings and fixtures as per manufacturers instructions complete all as specified and directed.
4
-
-
... More
Supply and fix 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish with drop designer type complete all as specified and as directed. (Frame work for ceiling shall be measured and paid separately)
54
-
-
... More
S&F GI frame work for seamless false ceiling comprising of GI perimeter channel 0.55 mm thick with two unequel flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equel flanges of 15 mm each and web of 45 mm suspended from soffit and approximate 600 mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (n.exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
54
-
-
... More
M&L for preparation newly plastered surface and applying two coats of washable distemper over a coat of alkali resistant primer complete all as specified and as directed.
159
-
-
... More
S & F Micro perforated square edge and attrivate finish mineral fibre [sand micro] of nominal size 595x595, 5 mm thick having building attribute as in false ceiling, fixed and including grid of size 600x600 mm having main of aluminium -T of size 35x25x0.50 mm thick, cross aluminium -T of size 25x25x0.50 mm thick, the grid shall be suitable for mineral fibre tiles and hanging from soffits of existing RCC roof slab/ galvalume sheet with using connecting clips all as manufacturer's instructions complete all as specified and as directed.
48
-
-
... More
Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
2
-
-
... More
M&L for cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) of 25 mm thick as in sub base complete all as specified and directed.
86
-
-
... More
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
120
-
-
... More
M&L for Non-skid coloured ceramic joint free tiles in light shade 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed.
16
-
-
... More
M&L for Non-skid coloured ceramic joint free tiles in light shade 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting, Dados etc., set and jointed in neat cement slurry and pointed in white or coloured cement including rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as in backing coat for fixing of tiles to match the shade of the tile complete all as specified and as directed.
200
-
-
... More
M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/rectangular) polished, size of each tile 600x600 mm, in floors, over 15 mm thick screed bed in CM 1:4 and joints sha;ll be kept as 3mm filled with epoxy to attain the best result 3mm thick tile spacers to be used, masking tape shall be put before putting the epoxy grout & grout shall be thropughly cleaned immediately complete all as specified and as directed.
58
-
-
... More
S&F Glazed ceramic coloured tiles in vertical surface 350 x 250/ 450mmx 350 mm/ 300mmx 450mm x 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or cloured cement including rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as in backing coat for fixing of tiles complete all as specified and as directed. Note : Rate includes for cutting for offsets, wastage if any as per site requirement etc.,
34
-
-
... More
M&L for 18mm thick Plywood, BWR, type BB fixed with screws to timber/ ikron frame complete all as specified and directed.
11
-
-
... More
S & F of Rotational moulded Polyethylene water storage tanks of capacity 500 Litres(ISI Marked) (Cylindrical vertical with closed top) hoisted and fixed in position [Triple layered] complete all as specified and directed .
3
-
-
... More
S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia to suit 20mm outer dia CPVC pipes complete all as specified and as directed.
3
-
-
... More
S&F for 20 mm dia pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210 gms) complete all as specified and directed.
3
-
-
... More
Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
21
-
-
... More
Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
42
-
-
... More
Supplying and laying of CPVC pipes 20 mm dia (outer dia) SDR 11 & Plain CPVC SDR 11 fittings concealing on walls/ceiling or laying in floors complete all as specified.
21
-
-
... More
Supplying and laying of CPVC pipes 25 mm dia (outer dia) SDR 11 & Plain CPVC SDR 11 fittings concealing on walls/ceiling or laying in floors complete all as specified.
42
-
-
... More
S & F in repairs 15 mm bore angular stop valve, chromium plated , cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
6
-
-
... More
S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule in repair complete all as specified and as directed.
3
-
-
... More
S&F in repair 15 mm dia pillar taps for , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.
3
-
-
... More
Taking down eaves gutters and rainwater/soil/ waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and as directed.
30
-
-
... More
S & F 110 mm bore PVC (SWR) , waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
20
-
-
... More
S & F 110 mm bore PVC (SWR) WC connector, with lip ring complete all as specified and as directed.
2
-
-
... More
S & F 110 mm bore PVC (SWR) branch piece, junction single,(Single T) equal or unequalequal or unequal of any radius complete all as specified and as directed.
2
-
-
... More
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.
2
-
-
... More
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
2
-
-
... More
S & F 75 mm bore PVC (SWR) , waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
10
-
-
... More
S & F 75 mm bore PVC (SWR) bends of any radius with oval access door complete all as specified and as directed.
2
-
-
... More
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.
2
-
-
... More
S & F 75 mm bore PVC (SWR) branch piece, junction single,(Single T) equal or unequalequal or unequal of any radius complete all as specified and as directed.
2
-
-
... More
S & F 110 mm dia bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed in cement concrete complete all as specified and as directed.
6
-
-
... More
M&L for Cutting holes through brick/ stone/concrete wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and as directed.
76
-
-
... More
S & F in repair Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550x400 mm including with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. of complete all as specified.
2
-
-
... More
S&F Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) including provision of lime concrete bedding, connection to trap and flusing pipe etc., complete including making good to disturbedcomplete all as specified and as directed.
2
-
-
... More
S & F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketss complete all as specified and as directed.
2
-
-
... More
S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe inclusive of supply pipe to urinal spreader complete all as specified and as directed.
2
-
-
... More
S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110 mm bore pipe complete all as specified and as directed.
9
-
-
... More
Demolition of cement concrete [reinforced] of any description and in any position not otherwise specifically provided for complete all as specifed and as directed
0.2
-
-
... More
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) providing precast cement concrete for drain covers,corbels, brackets etc., with plain fair faces, including chamfers, weatherings, throating necessary formwork etc., and setting in mortar complete with joints to match complete all as specified and directed.
0.2
-
-
... More
M&L Mild steel TMT bars 10mm dia, and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing complete all as specfied and as directed
44
-
-
... More
M&L for 12 mm thick solid WPC lining/ Cladding over wall with decorative/ corrogated patten finished with wood grain with black colour combination including necessary cleat / required accessories in between two WPC panel for fixing to wall as per manufacturers specifications complete all as specfied and as directed
74
-
-
... More
S & F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. complete all as specified and as directed.
2
-
-
... More
M & L for wooden flooring with kiln dried Red oak select & better prefinished Engineered hard wood florring boards of density not less than 780 Kg/Cum, with tounge and groove joint and micro bevelled edges/ ends, in random lenghts of 12 inch to 60 inch, consisting of 9mm thick under layer and with 4mm thick wearing layer with UV cured aluminium oxide finish for scratch reistanc, laid over and including 4 to 6mm thick foam layer of approved quality fixed with approved adhesive on existing PCC floor complete all as specified and as directed.
54
-
-
... More
S&F of removable raised/false access flooring with system and its components of approved Make for different plenum height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work G.I. Pedestal etc., all complete, as per the architectural drawings, as specified and consisting of :
(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, GI pedestal head of size 75 mmx 75 mmx 3.5mm welded with GI fully threaded stud 16mm outer diameter with two GI check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestal shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make of the machine screw with rawl plug
(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc all complete as per the architectural drawings, as specified.
54
-
-
... More
(c) Providing and fixing Access floor panel of 600x600x32mm medium grade filled steel anti static high pressure lamination of 800H grade (FS800H). Access floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of steel gauges top 0.6mm and bottom 0.7mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible portend cementitious core mixed with lightweight forming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non warp technology upto 1mm thickness for superior adhesion and surface flatness within 0.75mm. The panel is to withstand a concentrated load of 363KGS applied on area 25mm x 25mm without collapse in the centre in the panel which is placed on four steel blocks. The panel impact load of 50kg all complete as per the approved manufactures specification and as per the direction of Engr-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product 450mm finished floor height (FFH).
-
-
-
... More
M&L for providing rust proof / anti corrosive treatment to bars :-
(i) Clearance of all exposed bars (new 7 old) around
(ii) Apply a single coat of Rust off & Rust top around bars new & old as recommended by the manufacture.
Note : Anti corrosive treatment shall be continuous especially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating.
2
-
-
... More
M&L for providing PMM (Polymer modified cementitious mortar) Over RCC Chajja, Parapet, and other RCC members :-
(i) Dry sub strata surface and free of debris & dust
(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 30 mm thickness.
Note : Application of PMM shall be preferably be in coats. PMM work shall be executed in fairely rapid successions so as entire work is completed within 30 mins). PMM shall be pre packed ready to use.
(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacture complete all as specified and directed.
20
-
-
... More
E/M PORTION
-
-
-
... More
Taking down point wiring copper with all fiitngs and fixtures removing materials from site and making goods the disturb surface of walls/ ceilings/floors etc., complete all as specified and as directed.
62
-
-
... More
Taking down sheet metal enclosure, DB, SPN DB including MCBs from site and making good the disturbed surface of wall complete all as specified and as directed.
6
-
-
... More
M&L for point wiring with two runs of single core 1.5 Sq.mm (Nominal area) PVC insulated unsheathed multistranded FRLS copper conductor cable confirming to IS drawn through and including Non metallic PVC conduit concealed including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc., including provision of multistranded 1.5 Sq.mm FRLS copper conductor as earth wire connected to common earth dolly and earth in distribution board including cutting of stone masonary/ wall complete all as specified and directed
(a) one light/exhaust fan/fan point controlled by one switch.
34
-
-
... More
All as per item Sl No. 84 here in before but for one 5 Amps socket on independent board including 1.5 Sqmm earth continuty FRLS Copper Cable all as specified..
10
-
-
... More
All as per item Sl No. 84 here in before but with 2.5 Sqmm FRLS copper cable for one 15 Amps power point including 2.5 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth all as specified.
18
-
-
... More
All as per item Sl No. 84 here in before but with 4.0 Sqmm FRLS copper cable for one 20 Amps power point including 4.0 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth all as specified.
2
-
-
... More
S & F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ complete all as specified and directed
44
-
-
... More
S & F switch Modular type single pole 16 Amps One Way AC 230V, 50HZ complete all as specified and directed
18
-
-
... More
S&F Celing rose surface backlite 63 mm dia two to three terminals complete all as specified and directed
34
-
-
... More
S & F Modular type socket 5/6A AC 230V, 50Hz complete all as specified and directed
10
-
-
... More
S & F Modular type switch combine 6A/16A multi purpose AC 230CV, 50Hz complete all as specified and directed
18
-
-
... More
S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed
6
-
-
... More
S&F Single pole and neutral enclosure with a two pin and earth plug and socket
complete with one single pole MCB complete all as specified and directed
2
-
-
... More
Supply and fix LED lights fitting 2' x 2' ceiling mouted light fitting 36/40 W LED including with diffuser complete with all connected accessories , including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed.
18
-
-
... More
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible,copper conductor cable of suitable size from ceiling rose complete, including taking down existing tube light fitting of any type and making good to the disturbed surface to match with existing complete all as specified and as directed
10
-
-
... More
S&F VTPN MCCB DB 4 way 12 outgoing having Powder coated sheet steel enclosure fitted with bus bar, DIN channel & neutral link & earth link complete all as specified and directed
2
-
-
... More
S&F SPN DB 12 Way with 200 Amps rated bus bar Double Door complete all as specified and directed
2
-
-
... More
S & F MCB SPN 6-32 Amps, 240 Volts, 'B' Curve complete all as specified and directed
2
-
-
... More
S & F MCB SP 6-32 Amps, 240 Volts, 'B' Curve complete all as specified and directed
50
-
-
... More
M&L Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable along with one run of 2.5 Sqmm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly (security lights) complete all as specified and as directed.
Note: 2 runs of 2.5 Sq.mm, 1 runs of 2.5 Sq.mm & one run of PVC Conduit will be measured as one unit
200
-
-
... More
M&L Sub main wiring with 3 runs of 6.0 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable along with one run of 6.0 Sqmm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly (security lights) complete all as specified and as directed.
Note: 3 runs of 6.0 Sq.mm, 1 runs of 6.0 Sq.mm & one run of PVC Conduit will be measured as one unit
90
-
-
... More
M&L Sub main wiring with 2 runs of 4.0 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable along with one run of 4.0 Sqmm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly (security lights) complete all as specified and as directed.
Note: 2 runs of 4.0 Sq.mm, 1 runs of 4.0 Sq.mm & one run of PVC Conduit will be measured as one unit
1520
-
-
... More
Supply and fix BLDC ceiling fans of less noise silent operation, speed controlable by regulator, light coloured, conforming to IS 374:2019, 1200 mm sweep, BEE 5 star rated, any govt. recognised lab tested, power factor 0.94, Wattage not more than 35 Watt, air delivery not less than 215 cmm, including down rod, wiring through down rod with 1.5 Sq.mm multistranded copper cable to ceiling rose complete all as specified and as directed.
6
-
-
... More
S&F MCCB 63 Amps, 4 pole, 50Hz, 415 Volts with ruptring capacity 16 KA complete all as specified and as directed.
2
-
-
... More
S & F MCB TP 40 to 63 Amps, 415 Volts, 'B' Curve complete all as specified and as directed.
6
-
-
... More
S & F MCB TPN 40 to 63 Amps, 415 Volts, 'B' Curve complete all as specified and as directed.
2
-
-
... More
S&F TPN DB 4 way 12 outgoing having Powder coated sheet steel enclosure fitted with bus bar, DIN channel & neutral link & earth link complete all as specified and as directed.
2
-
-
... More
S & F Three phase and nuetral sheet metal enclosure having triple pole and neutral one MCB of capacity 40 Amps, 415 Volts complete all as specified and as directed.
4
-
-
... More
Supply, fix, testing and commissioning of LT weather proof panel board powder coated outdoor type double door shutter, made out of CRCA 3.15 mm thick outer and 2 mm thick for inner door confirming to IS 8623 Part I & II with angle iron 50x50x6 mm outoor, floor mounting type with closed bus bar , chamber and with copper bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply including provision of digital Ammeter 0-200A, digital Voltemeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block masonry foundation 0.6 Mtr above ground level grouting etc., including provision of suitable size of cable glands, cable lugs, nut, bolts,washers etc., the bottom portion of enclosure shall be minimum 60 cm above ground level of legs of angle iron with and including the following complete all as specified and directed a) Copper bus bar capacity 200 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No b) MCCB FP 100 Amp 25 KA - 1 Nos c) MCCB FP 63 Apms 16 kA - 04 Nos d) MCB SPN 6-32 Amp 10 KA 'C' Curve - 1 No e) FRP Coating for LT panel f) Changeover switch 100 Amp, 4P- 01
1
-
-
... More
S&F Lightenining Arrester +5 Mtrs mounting mast with Base plate, guy wire with flash counter Model OPR-60 ESE Type LPSr with 5 mtr GI mast including PCC foundation as per manufacturers instructions and as per site requirement complete all as specified and as directed.
2
-
-
... More
Supply & Install advance conductive compound based chemical compound technology with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper coating 250 microns, earthing system confirming to IS:3034, the ROD should 17.2 mm & 3 meter length with rod to tape clamp, CR 125 (type 'A') additional protection of the terminal, Chemical compound should be the highly Conductive Compound as per BSEN 50164-7 with 03 Bags of 25 kg each bag & resistivity should be 0.05 ohm, the job includes digging the pit and refilling the same by furse CEM back Fill Compound (Ground Enhancer), the BFC should be mixed with cement in 3:1 for forming conductive concrete and it should be eco friendly, not contain environmentally hazardous material/metal, the earth pit should be provided with a light weight inspection pit cover PT-205 for protection and safe guard of terminals, in areas where soil condition is bad Good earth is to be arranged to fill the excavated pits by mixing furse CEM- a convenient and permanent solution by adding with 3:1 ratio chemical compound with the earth electrode in the main component of the earthing system which is in direct contact with the ground and thus provides a mean of releasing or collecting earth leakage currents, the material should have good electrical conductivity and anti corrosion property in wide range of soil conditions including taking down/dismantling of existing unserviceable earthing system complete all as specified & directed . (Make : ABB Furse RB 336 and CM040 or its equivalent as approved by GE). (NOTE :-Each earth pit should contain:- a) 1 No. copper bonded high tensile low carbon steel, 17.2 mm dia, 3 meter length. b) Rod to tape clamp (type 'A'). c) 03 Bags of 25 kg each chemical compound as per BSEN 50164-7 d) Light weight inspection pit cover with 5000 kg weight load capacity. e) Supply and installation shall be done by the authorised technician of the manufacturer)
6
-
-
... More
M & L Earthing complete with copper earth plate electrode 600 mm x 600mm x 3.15 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with copper earth strip of size 20x3mm by means of bolts, nuts, check nuts and washers protected by 40 mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C1, with 40 mm thick Precast R.C.C. (1:2:4) type B1 cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar, including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including taking down old one complete all as specified and as directed.
6
-
-
... More
S&F Test terminal box of size 175x150x100 mm made out of 2mm thick hot dip galvanised sheet drilled and screwed including 4 Nos, 125mm long hexogonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos, 8mm dia 25mm long hex head screw including taking down of existing test terminal box complete all as specified and as directed.
6
-
-
... More
S & F in repairs earth continuity conductor or main earthing lead with copper strip of size 20x3 mm, fixed to wall on batten or recesses or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc., as required complete all specified and directed.
60
-
-
... More
Supply and install Class 1+ 2 Surge protection Device of V50 + 3P- N/PE with OEM enclosure between Incoming Power Supply and earthpits complete all specified and directed.
2
-
-
... More
S & F Online UPS for 30 min back up three phase AC input 300 to 450 Volts and output single phase AC output Voltage 230 V (+/-1%) of capacity 10 KVA complete all as specified and directed.
2
-
-
... More
M&L for 16 Sqmm single core annealed tinned copper conductor cable with insulation of HR PVC compound, glass braided & an outer protective covering of extruded nylon including copper lugs, suitable PVC Conduit complete all as specified and directed
20
-
-
... More
M&L for Rolled Mild Steel angle, flat sheet or other section to make battery stand complete with grade of steel confirming to Fe-290 (Gde E-165) complete all as specified and directed.
30
-
-
... More
SMART ENERGY METERS
-
-
-
... More
Supply, Install, testing and Commissioning integrity of Smart Meter of different makes not more than 33% of particular make to ensure interchangeability at a later date as per BIS 16444 with communication technology including cellular/ RF/ Hybrid [Cellular+RF], AC whole current, three phase, Smart Energy Meter of rating 10-60 Amps complete as per specifications. Meter shall have the ability to communicate with Head End System (HES) on any one of the communication technologies mentioned in IS 16444 Part I (RF/Cellular) in a secure manner, in case of Cellular based meter, the meter shall accommodate e-SIM/ SIM of any service provider, the Smart Meters shall have a dedicated sealable slot for accommodating plug-in type bi-directional communication module which shall integrate the respective communication technology (RF/PLC/ Cellular) with the Smart Meters, leading to easy adaptability for network interfaces (WAN/NAN), the Plug-In module shall be field swappable/ replaceable complete all as specified and directed.
Note: a) Meter Specification may please be read in co-junction with PS clause. b) The contractor would be responsible for removing the existing meter, noting down the reading building wise and depositing it with the department.
828
-
-
... More
Supply, Install, Testing and Commissioning integrity of Smart Meter of different makes not more than 33% of particular make to ensure interchangeability at a later date as per BIS 16444 with communication technology including cellular/ RF/ Hybrid [Cellular+RF] AC whole current, Single phase, Smart Energy Meter of rating 10-60 Amps complete as per specifications, meter shall have the ability to communicate with Head End System (HES) on any one of the communication technologies mentioned in IS 16444 Part I (RF/Cellular) in a secure manner, in case of Cellular based meter, the meter shall accommodate e-SIM/SIM of any service provider, the Smart Meters shall have a dedicated sealable slot for accommodating plug-in type, bi -directional communication module which shall integrate the respective communication technology (RF/PLC/ Cellular) with the Smart Meters, leading to easy adaptability for network interfaces (WAN/NAN), the Plug-In module shall be field swappable/ replaceable complete all as specified and directed.
Note a) Meter Specification may please be read in co-junction with PS clause. b) The contractor would be responsible for removing the existing meter, noting down the reading building wise and depositing it with the department
8740
-
-
... More
NOTE FOR SERIAL ITEM No.120 & 121: (i) 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for cumulative energy and max demand of software.
(ii) Meter should have connect/disconnect functionality operatable from MDM/billing software and prepaid features would be configuired in MDM/billing end as per prevalent IS and applicable tariff plan
(iii) Meter should support communication protocol through RF [4G/5G/NB/IOT] with the software all as required at site and directed [cost of 4G /5G/NB IOT SIM, mapping vending portal charges etc., deemed to included the unit rate quoted for meter]
(iv) Two way communication with DCU/HES
(v) Clock synchronisation facility with HES [Head end system]
(vi) In case of RF, communication including different makes of meter shall be such that it should communicate with same DCU directly via mesh network.
(vii) The contractor shall keep sufficient No of smart meters [minimum 1% including accessories at each station through out the defect liability and guarantee period of 10 [ten years] in reserve for immediate replacement in case of any faculty meters to ensure zero downtime
-
-
-
... More
(viii) The contractor shall carryout comprehensive survey and submit his report through respective GE for the communication technologies being proposed for the all areas and shall take an Approval from the department. The decision of the Accepting Officer with respect to the communication technology shall be final and binding.
(ix) Guarantee of meters shall be 10 years from date of completion of Phase-I. The amount of security deposit for smart meter guarantee shall be 2.5% of the amount of smart meter at contract rates and shall be retained by the department from contractors dues. The amount shall be released after successful expiry of the guarantee period provided always that the contractor shall first have been paid the final bill and have rendered '' No Demand Certificate''(IAFW-451)''. The contractor may however , furnish a fixed deposit receipt in lieu, from a schedule bank pledge in favour of Garrison Engineer(NB) (Nodal Officer) for the period of guarantee in which case the amount if any, deducted from the dues /final bill shall be refunded.
(x) The cost of meter shall include DCU/ repeater cost in case of RF communication meters.
(xi) The OEM shall need to share the Authentication / Encryption keys of the meters along with relevant protocol details with the department.
(xii) A training to handle the smart meter to MES tradesmen shall also be given by professionals.
(xiii) The rate quoted shall also include any other materials which are necessary for smooth functioning of smart prepaid meter system and not mentioned here in this item
-
-
-
... More
M & L Submain wiring with 4 runs of 6 sqmm PVC insulated FRLS Copper Conductor cable along with one run of 6.0 sqmm FRLS Copper Cable for earth continuity conductor as earth lead for Sub main wiring and connecting to common earth dolly complete all as specified and as directed.
Note : 4 runs of 6.0 sqmm, 1 run of 6.0 sqmm shall be measured as one unit.
756
-
-
... More
M&L Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable along with one run of 2.5 Sqmm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly (security lights) complete all as specified and as directed.
Note: 2 runs of 2.5 Sq.mm, 1 runs of 2.5 Sq.mm will be measured as one unit
4000
-
-
... More
Supply and fix polycarbonate meter box as per IS 14772 with IP -55 weather proof and temperature proof,fire retardant suitable for three phase smart pre-paid meter viewing glass, concealed hinge and earth bolt plugged including cable glands for incoming and outgoing cables and locking arrangement for top cover of the box without affecting communication complete all as specified and directed.
828
-
-
... More
Supply and fix polycarbonate meter box as per IS 14772 with IP -55 weather proof and temperature proof, fire retardant suitable for single phase smart pre-paid meter viewing glass, concealed hinge and earth bolt plugged including cable glands for incoming and outgoing cables and locking arrangement for top cover of the box without affecting communication complete all as specified and directed.
8740
-
-
... More
SERVER HARDWARE AND SOFTWARE
-
-
-
... More
Supply, install, testing and commissioning Data Center (DC) for Integration of 80,000 smart meters PAN India with necessary hardware and software systems comprising the following: a) Database servers with having CPU of Intel Xeon Latest Gen Proc- 18 Core (2x10 Core Gold series processor), 160 GB RAM, 1TB Raid - 10 HDD, 4x1G Ethernet Ports, Dual HBA FC card for connection with SAN : 2 Nos
b) Application server having CPU Intel Xeon Latest Gen Proc- 36 Core (2x18 Core Silver series processor), 288 GB RAM, 1TB Raid - 5 HDD, 4x1G Ethernet Ports, Dual HBA FC card for connection with SAN : 4 Nos c) Provision of Web servers having CPU Intel Xeon Latest Gen Proc - 20 Core (2x10 Core Silver series processor), 160 GB RAM, 1TB Raid - 5 HDD, 4x1G Ethernet Ports, Dual HBA FC card for connection with SAN : 2nos
d) SAN Storage 20 TB Usable space out of which, 12 TB shall be on SSD with Raid-5 configuration & 2 TB shall be on SAS drive with Raid - 5 Configuration + 6 TB archival space on NL-SAS or SATA drive with Raid-5 configuration - 1 No
e) Workstations for Network Operating Monitoring Centre, Intel I7 13th Gen and above 32GB Ram, 2TB HDD, Windows 10 Professional Preloaded, MS office Preloaded, 1 GB dual Ethernet ports Minimum Two Nos. of USB Ports, AC Power Supply, 32” wide screen (16:9 aspect ratio), HD Resolution (1920x1080) LED Colour monitor keyboard & optical mouse. Each PC shall provided with 1KVA UPS with 15mins Backup, Desktop mounting, with 3 Years Warranty. Make: HP/DELL/LENOVO - 3Nos
f) Windows Server Operating System (Latest) having Windows Server 2022 Std, Windows MSSQL and iWindows Express T&D as per OEM design with 3 years License - 1Set
1
-
-
... More
g) SAN Switch as per design with FC Cable for SAN Connectivity for connection of SAN with Servers - 1Set
h) Load Balance with WAF Capabilities and router with accesorries as per OEM Design - 1Set
i) Layer Switch, KVM Switch and Server rack with all connected accessories - 1 set
j). Antivirus for servers McAfee/Quickheal/Norton/TrendMicro as per design for Period of 3 years- 1 set
k) FQDN with wildcard SSL cert as per design with 3 Years Subscription- 1 set
l) Firewall with Data encryption support 3DES (168 bits), AES 128-, 192-, 256- bit and hashing algorithm like MD5 , SHA-1, IKE, PKI (X.509) and IKEv2 with EAP as per OEM Design - 1 set
m) Network speakers with high quality audio systems in a single unit for live or scheduled voice messages for proactive security and to keep people safe as per OEM Design - 1set
n) Replication Link for DC to DR Server with all connected accessories - 1 set
-
-
-
... More
Supply, install, testing and commissioning Data Center (DR) for Integration of 80,000 smart meters PAN India with necessary hardware and software systems comprising the following: a) Provision of Database servers with having CPU of Intel Xeon Latest Gen Proc- 18 Core(2x10 Core Gold series processor), 160 GB RAM, 1TB Raid-10 HDD, 4x1G Ethernet Ports, Dual HBA FC card for connection with SAN : 2 Nos
b) Provision of Application server having CPU Intel Xeon Latest Gen Proc- 36 Core (2x18 Core Silver series processor), 288 GB RAM, 1TB Raid-5 HDD, 4x1G Ethernet Ports, Dual HBA FC card for connection with SAN: 4 Nos
c) Provision of Web servers having CPU. Intel Xeon Latest Gen Proc- 20 Core (2x10 Core Silver series processor), 160 GB RAM, 1TB Raid-5 HDD, 4x1G Ethernet Ports, Dual HBA FC card for connection with SAN : 2 Nos
d) SAN Storage 20 TB Usable space out of which, 12 TB shall be on SSD with Raid-5 configuration & 2 TB shall be on SAS drive with Raid-5 Configuration + 6 TB archival space on NL-SAS or SATA drive with Raid-5 configuration - 1 Nos
f) Windows Server Operating System(Latest) having Windows Server 2022 Std, Windows MSSQL and iWindows Express T&D as per OEM design with 3 years License - 1 Set
1
-
-
... More
g) SAN Switch as per design with FC Cable for SAN Connectivity for connection of SAN with Servers - 1 Set
h) Load Balance with WAF Capabilities and router with accesorries as per OEM Design - 1 Set
i) Layer Switch, KVM Switch and Server rack with all connected accessories - 1 set
j) Antivirus for servers McAfee/Quickheal/Norton/TrendMicro as per design for Period of 3 years- 1 set
k) FQDN with wildcard SSL cert as per design with 3 Years Subscription: 1 set
l) Firewall with Data encryption support 3DES (168 bits), AES 128-, 192-, 256- bit and hashing algorithm like MD5 , SHA-1, IKE, PKI (X.509) and IKEv2 with EAP as per OEM Design - 1 Set
m) Network speakers with high quality audio systems in a single unit for live or scheduled voice messages for proactive security and to keep people safe as per OEM Design - 1 Set
n) Replication Link for DC to DR Server with all connected accessories - 1 Set
-
-
-
... More
Note For Serial Item No. 126 & 127:- (i) Guarantee of DC & DR shall be 10 years from date of completion of Phase-I. The amount of security deposit for DC & DR guarantee shall be 2.5% of the amount of DC & DR at contract rates and shall be retained by the department from contractors dues. The amount shall be released after successful expiry of the guarantee period provided always that the contractor shall first have been paid the final bill and have rendered '' No Demand Certificate''(IAFW-451)''. The contractor may however , furnish a fixed deposit receipt in lieu, from a schedule bank pledge in favour of Garrison Engineer (NB) (Nodal Officer) for the period of guarantee in which case the amount if any, deducted from the dues /final bill shall be refunded.
-
-
-
... More
Supply, install, testing and commissioning of Operator Workstation and Revenue Kiosk Consisting of the following : a) Operator Workstations PC, Intel I7 13th Gen and above 32 GB Ram, 2TB HDD, Windows 10 Professional Preloaded , MS office Preloaded, 1 GB dual Ethernet ports Minimum Two Nos of USB Ports, AC Power Supply, 24” wide screen (16:9 aspect ratio), HD Resolution (1920x1080) LED Colour monitor keyboard & optical mouse. Each PC shall provided with 1 KVA UPS with 15 mins Backup, Desktop mounting, with 3 Years Warranty. Make: HP/DELL/LENOVO - 01 No
Revenue kiosk PC work station, Intel i7
13th Gen and above 32GB RAM, 2TB HDD, Windows 10 Professional Preloaded , MS office Preloaded, 1 GB dual Ethernet ports Minimum Two Nos. of USB Ports, AC Power Supply, 24” wide screen (16:9 aspect ratio), HD Resolution (1920x1080) LED Colour monitor keyboard & optical mouse. Each PC shall provided with 1 KVA UPS with 15 mins Backup,Desktop mounting, with 3 Years Warranty. Make: HP/DELL/LENOVO -01 No
c) Tab 10 inch LED display with 4GB RAM and memory with 64 GB . Tab shall be provided with customer portal app and connected with Wi Fi network . OS for Tab shall be latest android version-01
d) Printers - Color Laser A4 Size Duplex Printer with Wifi support
Print Speed, Single sided : Up to 38 ppm (A4)
Double sided : Up to 38 ppm (Cassette), 21 ppm (Multi Purpose Tray)
Printing Method: Colour laser beam printing
Print Resolution :Up to 1200 x 1200 dpi- 1no with all connected accessories- 1 Set” [GE NB/ND] [GE Chilka]
3
-
-
... More
Supply & Installation of Application Software for DC & DR Server Units Compromising of the following
a) Head End System (HES) with 10 years License and Implementation Charges for 80,000 Meters including perodic updates
b) Meter Data Management (MDM) with Smart Prepayment with 10 years License and Implementation Charges for 80,000 Meters including perodic updates
c) Consumer Web Portal with Smart Prepayment Built-in along with 10 years License and Implementation Charges for 80,000 Meters including perodic updates
d) Consumer Mobile App with Smart Prepayment Built-in along with 10 years License and Implementation Charges for 80,000 Meters including perodic updates
e) Complaint Handling System (CHS) with 10 years License and Implementation Charges for 80,000 Meters including perodic updates with Life Time License and Implementation Charges for 80,000 Meters including perodic updates. CHS shall have AI powered chat boat to offer a streamlined and efficient way to address customer complaint providing timely response and solutions 24x7
1
-
-
... More
AIR CONDITIONING
-
-
-
... More
Supply , install , commissioning and testing of Air Cooled Packaged Air Conditioners, comprising of Hermetic/Semi – Hermetically sealed Scroll Compressors with microprocessor based control, including copper refirgerant piping, electrtical interconnection between indoor and outdoor units , suitable for operation on R - 407c /R - 410a /R-32refrigerants and of nominal capacity not less than 8.75 TR complete all as specified and as directed
2
-
-
... More
Supply , install , commissioning and testing of Air Cooled Packaged Air Conditioners, comprising of Hermetic/Semi Hermetic– sealed Scroll Compressors with microprocessor based control, including copper refirgerant piping, electrtical interconnection between indoor and outdoor units , suitable for operation on R - 407c/R - 410a/R-32 refrigerants and of nominal capacity not less than 5.5 TR complete all as specified and as directed.
2
-
-
... More
M&L for Dehumidifier 15 ltr capacity including connecting accessories Plug top, cable, base assembly etc., complete all as specified and directed.
2
-
-
... More
M&L for HEPA filter with filtration efficiency 99.97%, Capacity 3 layer filtration 380 Cum/hr and connecting accessories Commissioning & testing complete all as specified and directed.
2
-
-
... More
Supply & Fix 2 AC timer with dip switch control and contactor with AC -03 duty voltage 415 VoltS, 20 AmpS rating including connection complete all as specified and as directed. Make- Proton 2-AC or its equivalent as approved by GE
2
-
-
... More
Suppy and Fix GI Collar Dampers, the damper blades shall be of 1.25mm ( 18 Gauge) Al/MS Black sheets and shaped to form air tight joint complete all as specfied and as directed
1.2
-
-
... More
Supply and Fix Aluminium Powder coated Supply air grills shall be fabricated from MS/AL sections, the grill shall have horizontal extruded complete all as specfied and as directed
3
-
-
... More
M & L for Thermal Insulation Supply / Return air duct shall be insulated with the 40kg/ cub.mt. Density 6mm thikness, class "1" nitrile rubber insulation, Insulation material shall be fixed to the ducting with adhesive, all angle joints shall be covered with 6 inch wide insulation complete all as specfied and as directed Make : K-flex/ Supreme or its equivalent as approved by GE
8
-
-
... More
M & L for Accoustic Insulation: Acoustic lining for supply air ducts with 10 mm thick of glass wool of 40 - 100 Kg/Cum density as per the specifications.
Make : K-Flex/ Supreme or its equivalent as approved by GE
8
-
-
... More
Supply and Laying of 32mm dia Drain piping using hard drawn PVC pipes covered with 6mm thick Nitrile rubber insulation including PVC fittings etc., complete all as specfieid and as directed Make:Finolex/Supreme/Prince/Sudhaka
8
-
-
... More
Supply and Erect Factory fabricated 24G GSS Ducting as per SMACNA standards with necessary angle flanges & GI full threaded rods and slotted rail supports as scheduled as per IS 655 complete all as specified and as directed.
Make : JSW/ JINDAL/ ESSAR
8
-
-
... More
M & L For double folded Fabric fire retardant Canvass Connector between indoor unit and duct complete all as specified and as directed.
4
-
-
... More
FIRE ALARM
-
-
-
... More
S & F Fire alarm control panel complying with BSEN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified and directed.
2
-
-
... More
Supply and fixing Detectors Complying with and type certified to EN - 45 Addressable type multisensor detector with heat and smoke combination as per IS: 11360 complete all as specified and directed.
40
-
-
... More
Supply and fixing Addressable type Flame detectors with UV/IR detection capacity (add up cost of module to be a complete set, the type of module shall be relay type module) complete all as specified and directed.
2
-
-
... More
Supply and fix Addressable type manual call point resettable type complete all as specified and directed. Make: Honeywell / Appollo / Siemens / Alert / Cosmos / Tata
2
-
-
... More
Supply and fix Addressable type loop sounders along with in-built isolators complete all as specified and as directed.
2
-
-
... More
Supply and fix Fire Alarm sounders / Sirens electronic type horizontal two stage continous normal operation for atleast 50 minutes with sound level 65 db to 120 db Measured at 1.5 m with sound output Variation of + 5 db 3500m range complete all as directed.
1
-
-
... More
Supply and fix 2 core 1.5 sqmm copper flexible FRLS Screened cable 2Core 1.5 Sqmm, high conductivity annealed bare electrolytic copper conductor 650/1100V grade, PVC insulated, pair twisted & screened, both inner and outer PVC sheathed with proper pair identification 1.2 Standard as per IS 1554, part -1 & IS 5831 latest and any other relevant standard complete all as directed.
120
-
-
... More
CC TV
-
-
-
... More
Supply and installation of CCTV Surveillance system consisting the following including comissioning and testing complete all as specified and directed by Engr in charge
(i) 8 Nos 5 MP IR camera and cabling incl conduit
(ii) HDCVI 16 Channel DVR
(iii) Power Supply Unit 12 V
(iv) Back up Disk 4 TB
(v) Rack Wall Mounted
(vi) UPS
(vii) Gigabit Eathernet Switch
(viii) Cat 6 Patch Panel
(ix) DVR Enclosure rack
(x) 55 inch display panel with interface HDMI(3)/DP/DVI-D/USB 2.0/RS232C/RJ 45/ Audio
1
-
-
... More
DG SET
-
-
-
... More
Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with foundation (as per OEM design), control panel with necessary meter and sound proof canopy as per CPCB IV plus norms of capacity 40 KVA (32 kW) with AMF Panel
(A) Engine
(i) RPM 1500
(ii) Liquid cooled type
(B) Alternator
(i) Capacity - 40KVA
(ii) Brushless 3 phase 0.8 power factor 1500RPM/ 50Hz, SPDP enclosure with H class insulation
(C) AUTO MAINS FAILURE panel for 40 KVA DG set with all connection & accessories with necessacry by pass arrangements.
(D) Others
(i) Fuel tank with capacity for running DG Set for 12 Hrs
(ii) Electrical battery voltage 12 Volts with Battaries. (iii) Micro-processor based Genset controllers display a host of genset parameters - Phase voltages & currents, frequency, Reverse power, Genset KVA, KW, KVAr, KWH, Power factor, Canopy Temperature, Lub oil pressure, Engine temperature, RPM, Run hours, Number of starts, fuel level, Auto/Manual stop, battery charge condition & AMF features.
(iv) Diagnostic Features:- Battery Charging failure, Over/Under speed, over current, over/under voltage, over KW, phase seq, phase missing, mains under voltage, earth fault trip & fuel usage alarm.
(v) Sound proof canopy as per CPCB norms
1
-
-
... More
(E) BASE PLATE :- Base plate shall be MS fabricated and strongly welded duly ribbed suitable for receiving engine, alternator along with flexible coupling it shall be include set of bolts, washers, rubber coupling, drip tray and protective screen around coupling complete.
Note: The complete generating set including engine/alternator shall be factory assembled by manufacturer or its autorized dealer as approved for assembling the DG sets. The DG set shall be assembled by OEM.
(F) DG SET FOUNDATION : DG set shall be installed on PCC M-15 foundation complete all as per recommendation and specification of OEM. It shall be extended 0.3 Meter all around the DG set acoustic enclosure. It shall be 300mm above ground level deemed to be included in quoted rates.
(G) ACOUSTIC ENCLOSURE FOR DG SET: The DG shall be covered with Acoustic enclosure fabricated of MS channel & CRCA sheet 2 mm thick having doors, insulation sides and top by mineral rock wool confirming to IS-8183 of adequate thickness acoustic louver/outlet, ventilation system, complete as per manufacturer recommendation with wiring and lightening arrangements, duly painted with weather proof & anti corrosive chemical. Forced ventilation shall be provide by axial flow fan 1440 RPM suitable capacity exhaust fan and inside temp shall not be rise more than 5-8 degree centigrade.
-
-
-
... More
Supply, fix, testing and commissioning of LT weather proof panel board powder coated outdoor type double door shutter, made out of CRCA 3.15 mm thick outer and 2 mm thick for inner door confirming to IS 8623 Part I & II with angle iron 50x50x6 mm outoor, floor mounting type with closed bus bar , chamber and with copper bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply including provision of digital Ammeter 0-200A, digital Voltemeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block masonry foundation 0.6 Mtr above ground level grouting etc., including provision of suitable size of cable glands, cable lugs, nut, bolts,washers etc., the bottom portion of enclosure shall be minimum 60 cm above ground level of legs of angle iron with and including the following complete all as specified and directed a) Copper bus bar capacity 200 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No b) MCCB FP 125 Amp 25 KA - 1 Nos c) MCCB FP 63 Apms 16 kA - 04 Nos d) MCB SPN 6-32 Amp 10 KA 'C' Curve - 1 No e) FRP Coating for LT panel
1
-
-
... More
Supply and lay in trenches 4 Core 16 Sqmm XLPE cable Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor completed all as specified and as directed
195
-
-
... More
Supply and lay in trenches 3.5 Core 25 Sqmm XLPE cable Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor completed all as specified and as directed
250
-
-
... More
Supply and lay in trenches 3.5 Core 35 Sqmm XLPE cable Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor completed all as specified and as directed
225
-
-
... More
Supply and lay in trenches 2 Core 10 Sqmm XLPE cable Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor completed all as specified and as directed
200
-
-
... More
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32 x 6mm (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate No.3 of SSR Part I including charcoal, rock salt, necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150 mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion
6
-
-
... More
Supply, install, testing and commissioning of servo controlled voltage stabilizer (confirming to BIS 9815 (PART-1); 1994, reaffirmation 2019 latest version). Three phase, four wire (RYBN), 50 Hz , Naturally oil cooled, unbalanced type, cooper wound, metallic body duly power coated with lifting hooks two Nos, digital display type, relay free smooth and silent operation with 1st filling of Transformer oil up to level having following specification:- (a) Capacity 10 KVA
(b) Type – suitable for unbalanced load and unbalanced input.
(c) Input voltage – 360V-480V, INPUT FREQUENCY 50 Hz.
(d) Output voltage stabilized at any designed/desired voltage 415/+-1%.
(e) Rated frequency -50 Hz
(f) Wave from distortion- Nil
(g) Response time- not to exceed 20 milli seconds
(h) sensitivity –(+/-)1%
(j) Rate of correction- Not less than 6 volt second between phase and neutral.
(k) Efficiency – more than 95%
(l) Type of load- three phase, unbalanced type.
(m) Metering- Digital display voltmeter/ Ammeter with multi-functional meter.
(n) Operating temperature –For indoor use upto max ambient temp+ 55 C
(o) Dimmer rating- as specified in Amp
2
-
-
... More
(p) Dimension of tanks as specified in inches
(q) Oil capacity as specified in (Ltrs)
(r) Class of insulation – Class F
(S) Mode of operation Automatic / manual
(t) Winding Temperature rise- Max 55 C (10 C above operating temp)
(u) Transformer oil- IS 335 marked
(v) Core –CRGO M4 Grade /CRNO (Cold Roll Grain Oriented )/(Cold Rolled Non-Oriented)
(w) Auto transformer (Variac)- 100 percent copper wound Electrolytic Grade
(x) Losses – As per IS Norms
(y) Power Factor- Not less than 0.95
(z) Protection- (i) Over load protections (ii) Short circuit protections (iii) High /Low voltage cut off (iv) By pass arrangement in case of emergency
(aa) Single phase sequence change/phase fall protection
(ab) Earth fault protection
(ac) Standard fitting & Accessories e.g Marking plate, lifting lugs, Cl Rollers, Earthing Terminals etc cable
-
-
-
... More
M&L for cutting of hard standing / road of size not more than 150 mm in trench for laying of pipe for protection of cable etc by means of Hand drill/Manual and making good the disturbed surface with PCC / Bitumen complete all as specified and directed by Engineer-in-charge.
18
-
-
... More
M&L for PCC 1:2:4 type B2 using 40mm grade stone aggregate as in foundation coping of electric pole or making good of disturbed surface complete all as specified and as directed by Engineer-in-charge.
0.5
-
-
... More
M&L for PCC 1:4:8 type D2 using 40mm grade stone aggregate as in PCC bed of electric pole complete all as specified and as directed.
0.5
-
-
... More
Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed by Engr-in-Charge.
135
-
-
... More
Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete all as specified and as directed by Engineer-in-Charge
81
-
-
... More
Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge
54
-
-
... More
M & L dry river sand cushioning over and around the cable for cable protection in trenches, leveled and punned down complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.
45
-
-
... More
Supply and lay burnt brick of old size sub-class ‘B’ for cable protection complete all as specified and as directed.
3300
-
-
... More
Supply and lay 80 mm dia pipe galvanised light grade complete including all fittings and fixtures complete to walls/pole/ under road/ culvert/ drain or laid in floors all as specified and as directed.
18
-
-
... More
Supply & Fix Route indicator for LT 1.1 KV cable rout marker MS cast iron round dia cast 4" round plate 2 mm thick MS angle of 1 feet powder coated yellow colour including PCC foundation (1:3:6) of size 0.15 X 0.15x 0.15 mtr of complete all as specified
15
-
-
... More
Taking down carefully submain wiring including batten/ conduit by unscrewing from wall, ceiling and making goods the disturb surface of walls/ ceilings/floors etc., to match the existing complete all as specified and as directed.
7046
-
-
... More
M&L Sub main wiring with 2 runs of 6.0 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable along with one run of 6.0 Sqmm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly (security lights) complete all as specified and as directed.
Note: 2 runs of 6.0 Sq.mm, 1 runs of 6.0 Sq.mm & one run of PVC Conduit will be measured as one unit
400
-
-
... More
M&L Sub main wiring with 4 runs of 6.0 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of Suitable along with one run of 6.0 Sqmm FRLS copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly (security lights) complete all as specified and as directed.
Note: 4 runs of 6.0 Sq.mm, 1 runs of 6.0 Sq.mm & one run of PVC Conduit will be measured as one unit
80
-
-
... More
Supply and installation of smart door lock system incuding finger print ID and RFID card complete all as specified and directed
2
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of first year after completion of phase I.
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of second year after completion of phase I
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of third year after completion of phase I
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of fourth year after completion of phase I.
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of fifth year after completion of phase I
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of sixth year after completion of phase I
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of seventh year after completion of phase I.
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of eighth year after completion of phase I
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of nineth year after completion of phase I
1
-
-
... More
Provision of Cyber Security Audit audited as per CERT empanelled Nodal agency as per Cyber Security Audit Baseline Requirements on Annual basis for Period of tenth year after completion of phase I
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of first year after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM
c) Maintenance of Consumer Web Portal with builtin Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment
e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of second year after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM
c) Maintenance of Consumer Web Portal with builtin Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment
e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of third year after after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM c) Maintenance of Consumer Web Portal with built-in Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of fourth year after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM
c) Maintenance of Consumer Web Portal with builtin Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment
e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of fifth year after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM
c) Maintenance of Consumer Web Portal with builtin Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment
e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of sixth year after after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM c) Maintenance of Consumer Web Portal with built-in Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of seventh year after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM
c) Maintenance of Consumer Web Portal with builtin Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment
e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of eighth year after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM
c) Maintenance of Consumer Web Portal with builtin Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment
e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of nineth year after after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM c) Maintenance of Consumer Web Portal with built-in Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Periodic Maintenance of the hardware of data centre [DC &DR] & following Application Software Systems for period of tenth year after after completion of Phase-I a) Maintenance of Head End System (HES)
b) Maintenance of Meter Data Management (MDM) with SPM c) Maintenance of Consumer Web Portal with built-in Smart Prepayment
d) Maintenance of Consumer Mobile App with builtin Smart Prepayment e) Maintenance of Complaint Handling System (CHS)
1
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers - 2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during first 11 months after completion of Phase-I].
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 12th month to 22nd month after completion of Phase-I )
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 23rd and 24th month after completion of Phase-I)
2
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 25th month to 35th month after completion of Phase-I)
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 36th month to 46th month after completion of Phase-I)
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 47th month to 57th month after completion of Phase-I )
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 58th and 68th month after completion of Phase-I)
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 69th and 79th month after completion of Phase-I)
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 80th month to 90th month after completion of Phase-I)
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 91th month to 101th month after completion of Phase-I)
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 102nd month to 112th month after completion of Phase-I )
11
-
-
... More
Outsourcing of services for operation of data center (DC & DR) with Skilled Engineers -2 Nos having Experience in data centre and Semi skilled Technician -1 No in General shift of 8 hrs including Sunday and holiday complete all as specified and directed (during 113th and 120th month after completion of Phase-I)
8
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled Engineers -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (During First 11 months after completion of Phase-I] [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (During 12 month to 22 month after completion of Phase-I] [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 23rd and 24th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
2
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Engineers -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 25th month to 35th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 36th month to 46th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 47th month to 57nd month after completion of Phase-I ) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 58th month to 68th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 69th month to 79nd month after completion of Phase-I ) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 80th month to 90th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 91th month to 101nd month after completion of Phase-I ) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 102th month to 112th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
11
-
-
... More
Outsourcing of services for operator work station and revenue kiosk with Skilled -3 No and Semi-Skilled Technician -3 Nos having Experience in respective fields in general shift of 8 hrs including Sundays and holidays complete all as specified and directed. (during 113th month to 120th month after completion of Phase-I) [One skilled+ 01 Semi Skilled for Each GE (NB/ND/Chilika)]
8
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of first year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of second year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of third year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of fourth year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of fifth year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of sixth year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of seventh year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of eighth year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of nineth year after completion of Phase-I]
9568
-
-
... More
Telecom Data charges for 120 MB data each month [per meter] complete all as specified and directed. [for period of tenth year after completion of Phase-I]
9568
-
-
... More
Integration of existing Smart Meter with AMI Data centre and peer to peer and logic implementation complete all as specified and directed.
769
-
-
... More
Supply only Hand Held Unit (HHU) to communicate locally over the optical port to the smart meter communication functionality requirement as mentioned in IS 15959 to download data from smart meter with GPRS interface with LCD graphical 3.5 TFT & 15 lines x 40 Characters visibility having memory of 512 MB complete all as specified and directed.
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%