Andhra Pradesh Disaster Recovery Project Tender

Providing S.S.Revetment for approns using 300 mm thick rough stone from approved source as per Techinical specefication conforming MORT&H clause no 2500&2504 including cost, seigniorage charges and conveyance of materials to site and including labour charges for all operations and all incidental charges etc., complete forapprons as per drawing and Techinical specification

Providing and fixing Village name board size 450x750 mm made out of Type – IV of ASTMD 4956-09 High Intensity Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer –in-Charge

Providing and applying Primer coat with bitumen Emulsion (Medium settting) (Bulk) using Emulsion pressure distributor at the rate of 0.70 kgs per sqm on the prepared granular surface cleaned with mechanical broom for finished item of work as per MoRT&H Specification 502 (5th revision) and as directed by the Engineer-in-Charge.