Zilla Parishad Tender

P- 245 , It. No - 4.11(ii) & (iii) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (ii) Grading-I Aggregate (63 mm to 43 mm) UsingStone Screening Type B (11.2 mm) B. Manual Means Add cost at site of 1.21 m³ of Grading-I Aggregates & 0.24 m³ Stone Screening Type-B to arrive at the complete rate.

(iii) Grading-II Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B (11.2 mm) B. Manual Means Add cost at site of 1.21 m³ of Grading-II Aggregates & 0.24 m³ Stone Screening Type-B to arrive at the complete rate.

Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (Using 7.5 kg bitumen emulsion/10sqm) (i) For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm)

Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m3 per m2) and 11.2 mm (@ 0.009 m3 per m2) size stone aggregates, including thoroughly cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smoot wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads Of MORD.

Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and stone chips, cost of heating the binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specification for Road & Bridge Works of MoRT&H (5th Revision).

E.C. Bullah walling with earth bullah walling made of 150mm. Dia. Bullah @ 750 mm. c/c & & 100 mm. dia. Bullah @750 mm. c/c driven about 3.75 m. below g.l. including fitting& fixing 100 mm. dia. Tie bar & tie post @ 2.25 m. c/c including fitting & fixing 3 nos. 100 mm. dia. runner fitted & fixed with nails all complete.

Close Bamboo Walling made of 65mm to 75mm dia. bamboos (in single line) driven about half-length intothe ground side by side, with stout stays at an intervalof 1m, 3nos. of half split bamboo runner of same diafitted and fixed with nails etc. complete as perdirection. (Measurement to be taken along thelength of piling after finishing the works).(iii) With bamboos of length above 2.50m and upto 3.00m

Add GST@ 12%

Add LW Cess@ 1%