West Bengal State Electricity Distribution Company Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Eprocure
Opening Date16 Nov 2021
Closing DateCancelled
Tender Amount₹ 2,20,40,044
Costs
EMD
₹ 4,40,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Rm/dr/civil/etender/2021 22/12 Dated 03/11/2021
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_WBSED_349434_1Bid Award Id
ViewTender No
RM/DR/Civil/eTender/2021 22/12 dated 03/11/2021Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation
600
-
78.32
... More
(iv) With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth.
75
-
496.71
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of
finished quantity)
350
-
526.28
... More
Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight including drilling vertically 12mm. dia holes at the junction of floor and wall at 300mm. interval to reach the soil below using hand operated pressure pump to squirt chemical emulsion into the pump to squirt chemical emulsion into the holes at the rate of one litre per hole. The holes shall be sealed after operation to match with the existing floor. The entire work is to be carried out as per specification laid down in para 4.3.1.4 of code I.S.-6313 (Part-III)-
1981.
180
-
73.73
... More
Removal of rubbish, earth etc from the work site and disposed of the same beyond the compound in conformity with The Municipal Corporation rules for such disposal loading into the truck and cleaning the site in all respects as per direction of E.I.C.
400
-
167.66
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
1100
-
327.24
... More
Supply, delivery and stacking of 40 mm Nominal graded Stone aggregate loading, unloading, carrying and cost of material with all charges if applicable. Void to be deducted from stack measurements as per PWD SOR
70
-
873.15
... More
Labour for laying shingles of 63 mm & 37.5 mm including rough dressing.
700
-
4
... More
Cement concrete with 30mm down graded shingles excluding shuttering. N.B. Variety. a) In ground floor (1:3:6) proportion.
130
-
3426.93
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
25
-
4046.06
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree
-
-
-
... More
In Ground Floor:
335
-
4792.45
... More
1st Floor
80
-
4888.4
... More
2nd Floor
80
-
4984.35
... More
Roof
30
-
5080.3
... More
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.
10
-
120.19
... More
(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department]
180
-
88.88
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, fittings, fixing and striking out after completion of works(upto roof of ground floor)
-
-
-
... More
(a) 25 mm to 30 mm thick wooden shuttering as per decision &
direction of Engineer-In-Charg
-
-
-
... More
In Ground Floor:
2000
-
331.28
... More
1st Floor
800
-
349.46
... More
2nd Floor
800
-
367.64
... More
Roof
200
-
385.82
... More
i) 25mm to 30mm thick shuttering without staging in foundation etc.
-
-
-
... More
In Ground Floor:
300
-
207.05
... More
1st Floor
10
-
225.23
... More
2nd Floor
10
-
243.41
... More
Roof
10
-
261.59
... More
Brick work with 1st class bricks in cement mortar(1:4). a) In foundation and plinth.
70
-
5223.72
... More
Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor
-
-
-
... More
In Ground Floor:
50
-
5170.19
... More
1st Floor
55
-
5282.3
... More
2nd Floor
55
-
5394.41
... More
Roof
20
-
5506.52
... More
125mm tick brick work with 1st class bricks in Cement mortar (1:4).
a)In ground floor.
-
-
-
... More
In Ground Floor:
200
-
680.74
... More
1st Floor
5
-
690.84
... More
2nd Floor
50
-
700.94
... More
Roof
5
-
711.04
... More
Supplying, fitting, fixing, Chain link fencing of approved quality
with R.C.C posts wooden posts or iron posts by means of
galvanised "C" clips to grid of horizontal strands of galvanised
high tensile spring steel wire of 12 S.W.G which have to be
tensioned and fixed to the vertical posts by means of galvanised
special clips, bolts and nuts etc.
(The rate is exclusive of the cost of posts)
(I) 50 mm. x 50 mm. x 8 g.
75
-
418.14
... More
(a) 75 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor including H.B. netting in every alternate layers.
-
-
-
... More
In Ground Floor:
1
-
470.66
... More
1st Floor
1
-
482.78
... More
2nd Floor
2
-
494.9
... More
Roof
1
-
507.02
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
20
-
195.94
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).
[Excluding cost of chipping over concrete surface]
-
-
-
... More
(i) With 1:6 cement mortar
-
-
-
... More
(b) 20 mm thick plaster
-
-
-
... More
In Ground Floor:
1000
-
158.57
... More
1st Floor
500
-
162.61
... More
2nd Floor
450
-
166.65
... More
Roof
100
-
170.69
... More
(ii) With 1:4 cement mortar
-
-
-
... More
(b) 15 mm thick plaster
-
-
-
... More
In Ground Floor:
1200
-
155.54
... More
1st Floor
350
-
159.58
... More
2nd Floor
300
-
163.62
... More
Roof
220
-
167.66
... More
(iii) With 1:3 cement mortar
-
-
-
... More
(c) 10 mm thick plaster
-
-
-
... More
In Ground Floor:
200
-
132.31
... More
1st Floor
200
-
136.35
... More
2nd Floor
200
-
140.39
... More
Roof
50
-
144.43
... More
Neat cement punning about 1.5mm thick in wall, dado, window
sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
800
-
34.34
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
(a) For works in foundation and upto roof of ground floor/upto 4 m
(i) Tor steel/Mild Steel
I. SAIL/ TATA/RINL
-
-
-
... More
In Ground Floor:
42
-
67167.02
... More
1st Floor
13
-
67601.32
... More
2nd Floor
13
-
68035.62
... More
Roof
4
-
68469.92
... More
M.S. structural works with hollow sections ( square or rectangular shape) conforming to IS: 806-1957 & IS:1161-1958) connected to one another with bracket, gusset, cleat as per design, drawing & direction of for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. ii) For other Structural works like galleries etc
-
-
-
... More
In Ground Floor:
0.1
-
77655.87
... More
1st Floor
0.1
-
78820.71
... More
2nd Floor
0.1
-
79985.55
... More
Roof
0.1
-
81150.38
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
I) For structural members of specified sections weighing less than 22.5 Kg./m
-
-
-
... More
In Ground Floor:
6
-
75316.71
... More
1st Floor
2
-
76446.46
... More
2nd Floor
2
-
77576.21
... More
Roof
0.5
-
78705.96
... More
M.S. gate as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the
Engineer-in -charge.
25
-
7769.93
... More
Locking arrangement for Jail type doors including supplying fitting
and fixing in position complete as per approved design.
15
-
279.77
... More
M.S. works in framed gratings of window/fencing etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed.
In ground floor.
15
-
9037.48
... More
Supplying, fitting and fixing cast iron heavy type spiral staircase of
approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of
suitable section embedded to wall with cement concrete (1:2:4)
including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials.
(a) With 1200 mm.dia. well
12
-
4249.07
... More
Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T
(Reinforced Barbed Tape) Concertina fencing on wall top using
concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.)
150
-
412.08
... More
Supplying, fitting & fixing 1st quality Ceramic tiles/Acid Resistive tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
-
-
-
... More
(A) Floor
-
-
-
... More
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
2nd Floor
20
-
751.44
... More
(B) Wall
-
-
-
... More
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick
cement slurry at back side of tiles using cement @ 2.91
Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
2nd Floor
35
-
758.51
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
400
-
1008
... More
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.
130
-
224
... More
Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps.
90
-
208
... More
Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]
Red Variety
(i) 25 mm. thick
100
-
471.67
... More
Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material.
[Border concrete if necessary to be paid separately].
Note: Sub-grade CBR should not be less than 5.
a) 25 mm thick Tiles as per IS: 1237-2012 for footpath, ramp, staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side of Block. Cement for Mortar & Slurry to be supplied by Department).
(ii) Coloured Decorative
100
-
699.93
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coat
-
-
-
... More
In Ground Floor:
1100
-
31.71
... More
1st Floor
350
-
32.43
... More
2nd Floor
300
-
33.15
... More
Roof
200
-
33.87
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. b) Premium 100% Acrylic Emulsion (Two Coats)
-
-
-
... More
In Ground Floor:
1100
-
84.84
... More
1st Floor
350
-
85.56
... More
2nd Floor
300
-
86.27
... More
Roof
200
-
86.99
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
-
-
-
... More
In Ground Floor:
400
-
123.22
... More
1st Floor
550
-
123.95
... More
2nd Floor
550
-
124.67
... More
Roof
100
-
125.4
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.(a) One Coat
(Water based interior grade Acrylic Primer) All Floors
1600
-
31.11
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty. (Two coats) i) Standard Quality (All Floors)
1600
-
62.62
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
650
-
29.29
... More
(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
100
-
38.38
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With super gloss (hi-gloss) -
(iv) Two coats (with any shade except white)
-
-
-
... More
(a) On timber or plastered surface :
100
-
81.81
... More
(b) On steel or other metal surface :
650
-
79.79
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (Flash butt welded windows and ventilators)
-
-
-
... More
Without integrated grills.
-
-
-
... More
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars.
-
-
-
... More
In Ground floor
6
-
1518.03
... More
1st Floor
16
-
1536.25
... More
2nd Floor
14
-
1554.68
... More
Roof
2
-
1573.34
... More
b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars. [The extra rate admissible for the openable portion only]
-
-
-
... More
In Ground floor
11
-
2220.99
... More
1st Floor
31
-
2247.64
... More
2nd Floor
28
-
2274.61
... More
Roof
4
-
2301.91
... More
(c ) Extra over item no. 48.110 & 48.120
-
-
-
... More
(iv) Two point nose steel handle including fitting and fixing.
150
-
50.5
... More
(vi) steel peg stay 300 mm long including fitting and fixing.
150
-
35.35
... More
(viii) M.S. integrated grill as per approved design integrated with
steel window or ventilator, joints continuously welded with M.S. flats and bars. (The weight of grill will be determined (theoritically) from section of the grills actually used excluding the rolled steel section of the window / vent. The weight of the grill should be calculated at 7.85 gm./ cu.cm.)
1100
-
95.95
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)
-
-
-
... More
Ground Floor & First Floor
70
-
481.77
... More
2nd Floor & Roof
50
-
505.86
... More
Extra for fixing glass panes in steel window.
120
-
67.67
... More
(a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
15
-
3302.7
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,
railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
0.2
-
10121
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom
guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in
fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.
In ground floor.
12
-
4394.51
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized
(with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
-
-
-
... More
h) Louvered window.
-
-
-
... More
i) Top, bottom and side member.
10
-
184.83
... More
ii) Louvered Section.
3
-
664.58
... More
iii) Cleat angle ( Non-annodized).
0.5
-
265.63
... More
k) Movable door shutter.
-
-
-
... More
i) Door frame. (Top & sides).
7
-
318.15
... More
ii) Shutter :
-
-
-
... More
Top rail.
3
-
307.04
... More
Bottom rail.
3
-
452.48
... More
Lock rail
3
-
380.77
... More
Door vertical.
4
-
335.32
... More
Glazing cleap.
13
-
50.5
... More
Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. a) EPDM / weather gasket for outer frame and mullion.
15
-
15.15
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. i) 4mm thick clear glass.
7
-
401.98
... More
ii) Godrej Hydraulic door closer fitted and fixed complete. (b) Medium type
1
-
1681.65
... More
Labour charge for fabrication and installation of composite door,
window, partitions made from annodized extruded alloy aluminium sections for the following units:-
-
-
-
... More
(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.
The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
v ) Louvered window.
2
-
730
... More
(B) Partly glazed partly panelled or fully glazed single/double leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge.
5
-
1281
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
-
-
-
... More
Ground Floor
0.1
-
82756.37
... More
1st Floor
0.1
-
82958.37
... More
2nd Floor
0.1
-
83160.37
... More
Roof
0.1
-
83362.37
... More
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.
In ground floor.
(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm
(a) Ordinary Teak Wood.
-
-
-
... More
Ground Floor
1
-
4190.49
... More
1st Floor
1
-
4253.35
... More
2nd Floor
3
-
4316.2
... More
Roof
2
-
4379.07
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other
fittings. (a) 35 mm thick shutters (single leaf)
-
-
-
... More
In Groung Floor
1
-
2685.59
... More
1st Floor
5
-
2725.88
... More
2nd Floor
1
-
2766.16
... More
Roof
1
-
2806.45
... More
Extra For Vision aperture (round or retangular in shape) with 7.4kg. Per sq.m./ 3mm thick glass pane with wooden beads. (Cost of glass panes and wooden beads will be paid separately).
5
-
33.33
... More
Providing & fixing factory made 30 mm thick factory made solid pvc door shuttermade out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm /welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge. b) Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish:
5
-
2754.27
... More
Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. (b) Pre-laminated Colour.
10
-
567.62
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length
50
-
25.25
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:
-
-
-
... More
(i) 50mm long x 10mm dia. bolt.
20
-
44.44
... More
(ii) 75mm long x 10mm dia. bolt.
20
-
48.48
... More
(iii) 100mm long x 10mm dia. bolt.
20
-
53.53
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:
-
-
-
... More
(i) 50 x 45 x 2.5mm.
50
-
37.37
... More
(iii) 75 x 45 x 2.5mm.
50
-
52.52
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod)
-
-
-
... More
(i) 75 mm grip x 10 mm dia rod.
15
-
61.61
... More
(ii) 100 mm grip x 10 mm dia rod.
15
-
69.69
... More
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(b) 250mm long.
20
-
160.59
... More
ii) Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.
(b) 250mm long.
20
-
602.97
... More
Cord for fan light fitted & fixed complete.
30
-
26.26
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
-
-
-
... More
(A) (i) Single Socketed 3 Meter Length
-
-
-
... More
(b) 110 mm
30
-
294.92
... More
(c) 160 mm
300
-
551.46
... More
(B) Fittings
-
-
-
... More
(i) Coupler
-
-
-
... More
(b) 110 mm
10
-
85.85
... More
(c) 160 mm
100
-
263.61
... More
(ii) Plain Tee
-
-
-
... More
(b) 110 mm
10
-
85.85
... More
(c) 160 mm
20
-
264.62
... More
v) Plain Y
-
-
-
... More
(b) 110 mm
10
-
208.06
... More
(c) 160 mm
20
-
588.83
... More
ix) Bend 45º
-
-
-
... More
(b) 110 mm
10
-
89.89
... More
(c) 160 mm
20
-
295.93
... More
x) Bend 87.5º
-
-
-
... More
(b) 110 mm
10
-
121.2
... More
(c) 160 mm
50
-
341.38
... More
xvi) Pipe Clip
-
-
-
... More
(b) 110 mm
10
-
21.21
... More
(c) 160 mm
50
-
43.43
... More
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials.
-
-
-
... More
(A) Above ground
-
-
-
... More
(ii) 110 mm dia.
10
-
57.57
... More
(iii) 160 mm dia.
300
-
66.66
... More
(B) Under ground
-
-
-
... More
(ii) 110 mm dia.
20
-
84.84
... More
Supplying, fitting and fixing 10 litre porcelain low-down cistern of
approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White
1
-
2319.97
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
(a) With 'P' trap
1
-
1435.21
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.
(a) E.W.C
(ii) Plastic (hallow type) white
1
-
383.8
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets
(a) Sink only
(i) 530 mm X 430 mm x 180 mm
1
-
3317.85
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (ii) 450 mm long
3
-
82.82
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
(i) 600 mm long
1
-
47.47
... More
Supplying, fitting and fixing Waste fittings complete. (b) Polythene
(i) 32 mm
1
-
44.44
... More
Supplying, fitting and fixing pillar cock of approved make.
a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -
Tropical / Sumthing Special of ESSCO or similar brand).
2
-
560.55
... More
Supplying, fitting and fixing C.P. Wall Flange
15
-
64.64
... More
Supplying, fitting and fixing dome shaped C.P. waste grating for urinals. (i) 32 mm
3
-
181.8
... More
Supplying, fitting and fixing bib cock or stop cock.
-
-
-
... More
(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
2
-
544.39
... More
(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm
10
-
155.54
... More
(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &
513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
2
-
497.93
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
-
-
-
... More
(i) 635 mm X 395 mm X 420 mm
1
-
2897.69
... More
(ii) 470 mm X 280 mm X 340 mm
1
-
954.45
... More
Supplying, fitting and fixing towel rail with two brackets
(a) C.P. over brass
(i) 25 mm dia. and 450 mm long
2
-
387.84
... More
Wash basin vitreous china of approved make (without fittings)
supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.
(ii) 550 mm X 400 mm size
1
-
1396.83
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will
be made seperately) PVC/UPVC Pipes
-
-
-
... More
(a) For Exposed Work
-
-
-
... More
15 mm
20
-
102.01
... More
20 mm
50
-
130.29
... More
25 mm
50
-
178.77
... More
32 mm
50
-
238.36
... More
(b) For Concealed Work
-
-
-
... More
15 mm
5
-
138.37
... More
20 mm
5
-
159.58
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
-
-
-
... More
(b) For Concealed Work
-
-
-
... More
15 mm
3
-
141.4
... More
20 mm
2
-
172.71
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant
(i) For 10 users
I.S.Code. B) With Bazree (N.B Varity) (SAIL/TATA/RINL)
1
-
34132.95
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
ii) With Bazree (N.B Variety) (Other than SAIL/TATA/RINL)
3
-
6515.51
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (SAIL/TATA/RINL)
1
-
15792.36
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity
1
-
5179.28
... More
Labour for hoisting plastic water storage tank.
(i) Upto 1500 litre capacity.
(a) Upto Roof
1
-
183.82
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
2
-
19.19
... More
Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. 100 mm dia. boring
(i) First 50 metre
50
-
1024.14
... More
(ii) Next 50 metre
40
-
891.83
... More
Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets to make 100mm dia borewell
1
-
407.03
... More
Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (i) 100 mm dia.
12
-
379.76
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).
(a) 100 mm Dia (for CASING PIPE)
78
-
882.74
... More
(b) 32 mm Dia (for SUCTION PIPE)
78
-
170.69
... More
Supplying, fitting and fixing check valve (horizontal) G.M. tested to 21 kg
per sq. cm.
(iv) 32 mm
1
-
1028.18
... More
Supplying, fitting and fixing check valve (vertical) G.M. tested to 21 kg per
sq. cm.
(iv) 32 mm
1
-
693.87
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding
as required.
5
-
7613.38
... More
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all
complete.
1
-
925.16
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
-
1243.31
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.
Note: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with
surface water.
0.7
-
2049.29
... More
Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.
(i) 40 mm
1
-
51.51
... More
Supplying, fitting and fixing G.I. cap at top (i) 100 mm
1
-
140.39
... More
Providing 200 mm centre guide
i) With Clamp
1
-
129.28
... More
Supplying, Installation of Submersible Motor Pump of 2 H.P. of Crompton / KSB or other renowed make conforming to latest BIS codes including carriages, necessary fittings complete in all respect.
1
-
52726.04
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface.
Average Run 6 mtr
30
-
650
... More
Average Run 8 mtr
33
-
796
... More
Average Run 9 mtr
24
-
870
... More
Average Run 10 mtr
27
-
943
... More
Average Run 12 mtr
75
-
1089
... More
Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface]
45
-
67
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
10
-
173.34
... More
Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
54
-
204
... More
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.
14
-
236
... More
Supply & Fixing PVC casing - capping (precision
Make) on wall or ceiling. Incl. necey. PVC Fitt. Etc. and mending good damaged to building
works.
1125
-
27.7
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.
2x36/0.3(2.5 sq. mm + 1x22/0.3 (1.5 sq.mm)
243
-
102
... More
2x56/0.3(4 sq. mm = 1x22/0.3 (2.5 sq.mm)
1995
-
132
... More
Supply and fixing of 12" (300mm, 1450 RPM) Heavy duty exhaust Fan after cutting wall and finishing with necessary. Cementing work including supplying and fixing of 1 no. louver shutter etc. with necesssary connection. (Havells, C&G or EIC Approved)
2
-
3525.85
... More
Supply & Fixing of (48") 1200 mm sweep size white Beestar rated Celing Fan (Havells, C&G or EIC Approved)
14
-
1823.56
... More
Supply and fixing Angel holder with 15W LED Lamp
16
-
247.03
... More
Supply and fixing of Cirrus Mini Pro Celing light (SM200C LED16S 6500 PSU OD WH) (Make: Philips)
1
-
3063.22
... More
Supply & Fixing of Battens type LED Tube Light
2 x 2 (22 watt)
14
-
3112.63
... More
Supply & Fixing of Battens type LED Tube Light
1 x 1 (22 watt)
6
-
1803.8
... More
Supply & Fixing 240/415V, 63 A, TPN MCB OF Breaking Capacity 10 KA & C characterstic on din rail of exsting DB & necessary connection(Legrand)
3
-
1830
... More
Supply & Fixing 240/415V, 6-32 A, SP MCB OF Breaking Capacity 10 KA & C characterstic on din rail of exsting DB & necessary connection(Legrand)
42
-
190
... More
Supply & Fixing of SPN MCB DB 2+16 way (Make:Legrand)
3
-
2200
... More
Supply & Fixing of 16 SWG MS BOX (150 X 100 X 65MM) 6" X 4" X 2.5"
36
-
55
... More
Supply & Fixing of 16 SWG MS BOX (250 X 100 X 65MM) 10" X 8" X 2.5"
60
-
110
... More
Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode
3
-
10466
... More
Supply & Laying of 1 core 10 sq. mm PVC copper cable in trench/pipes/underground/overhead with termination at indoor/outdoor terminals including supply of glands, lugs, cable ties, tagging etc. as required as per Technical Specification, approved Drawing of WBSEDCL & Scope of works .
400
-
93.73
... More
Supplying and fixing 415V, TPN on load front operated Changeover switch open execution type in SS enclosure/cubical with nuts bolts etc 200A (make:L&T)
1
-
8971.95
... More
Supply and fixing Outdoor Luminaires street light (Green line-BRP410 LED CW 072 MR FG S1 PSU GR) Make: Philips
8
-
14892
... More
Supply & Fixing Pedestal light Dark Gray & Glass, metal Tornado E27, 24 W Lamp (Model: 15332/54) Philips Make
2
-
4070
... More
Supply and fixing of 2 x 6 SQ.MM PVC/AA Cable partly in underground trench and mainly laying along the pole with necessary crimping arrangemnet on pole.
200
-
40
... More
Supply and fixing of G.I. loop box having size 8"x6"x4" with 1 no. Porcelain chair for beutral connection and 1 no. 15 Amp. Kit Kat and clamp protection.
8
-
1050
... More
Erection of Isolator cum LA Support Stucture (PCC 9M 4Pole) with all fitting & Foundation along with supply of all Nuts & bolts and LA base palte 430x430x8mm but without Insulator (HL)
5
-
35500
... More
Erection of Isolator Stucture (PCC 9M 4Pole) with all fitting & Foundation along with supply of all Nuts & bolts but without Insulator (LL)
1
-
32500
... More
Erection of DP Stucture of 9mtr PCC pole with all fitting & Foundation along with supply of all Nuts & bolts but without Insulator
5
-
8922
... More
Erection of 12.8 MTR Sigle Pole complete fitting & Foundation along with supply of all Nuts & bolts but without Insulator
4
-
3835
... More
Supply & Erection of Cable support Structure G.I as per WBSEDCL Specification
2
-
19837.5
... More
Erection of 33KV 400A Centre rorating isolator H.L WO ES(H/L) for PTR
2
-
5188.17
... More
Erection of 33KV 400A Centre rorating isolator H.L WH ES(H/L)for I/C & O/G
3
-
6610.77
... More
Erection of 33KV 400A Centre rorating isolator (L/L) for SST
1
-
5127.31
... More
Erection of 33KV SCADA compatible Feeder Control & Relay panel
3
-
10864.11
... More
Erection of 33KV SCADA compatible PTR Control & Relay panel
2
-
16031.4
... More
Laying & Jointing of 1.1KV 4C X 2.5 sq.mm copper control cable with supply of Cable Lugs, glands, tapes, sockets ETC
1
-
15690.08
... More
Laying & Jointing of 1.1KV 8C X 2.5 sq.mm copper control cable with supply of Cable Lugs, glands, tapes, sockets ETC
0.3
-
28859.48
... More
Laying & Jointing of 1.1KV 12C X 2.5 sq.mm copper control cable with supply of Cable Lugs, glands, tapes, sockets ETC
1.6
-
41731.57
... More
Installation of 30V,100AH Battery
2
-
20000
... More
Installation of 30V,35A Automatic Float cum Boost Battery Charger
2
-
6000
... More
Erection of 42KV Lightning arrestor (3nos=1)
5
-
3748.77
... More
Erection of 12KV Lightning arrestor (3nos=1)
7
-
339
... More
Installation of A.C 3Phase C.T. and P.T operated electronic Meter
13
-
700
... More
Laying & dressing of 11KV 1Cx1000 sq.mm XLPE Cable
500
-
110
... More
Laying & dressing of 33KV 3Cx400 sq.mm XLPE Cable
375
-
75
... More
Laying & dressing of 33KV 3Cx185 sq.mm XLPE Cable
850
-
65
... More
Laying & dressing of 11KV 3Cx300 sq.mm XLPE Cable
500
-
59
... More
Laying & dressing of 1.1KV 4Cx185 sq.mm PVC Cable
75
-
38
... More
Laying & dressing of 1.1KV 4Cx120 sq.mm PVC Cable
50
-
30
... More
Laying & dressing of 1.1KV 4Cx16 sq.mm PVC Cable
360
-
15
... More
Laying & dressing of 1.1KV 2Cx10 sq.mm PVC Cable
345
-
15
... More
Supply & Jointing of O/D type shrinkable end termination jointing kit for 11KV, 1CX1000 sq.mm XLPE cable
8
-
13017
... More
Supply & I/D type shrinkable end termination jointing kit for 11KV, 1CX1000 sq.mm XLPE cable
8
-
10051
... More
Jointing of O/D type shrinkable end termination jointing kit for 33KV, 3CX400 sq.mm XLPE cable
5
-
27922
... More
Jointing of I/D type shrinkable end termination jointing kit for 33KV, 3CX400 sq.mm XLPE cable
5
-
23521.61
... More
Jointing of O/D type shrinkable end termination jointing kit for 11KV, 3CX300 sq.mm XLPE cable
5
-
11004
... More
Jointing of I/D type shrinkable end termination jointing kit for 11KV, 3CX300 sq.mm XLPE cable
5
-
8025
... More
Jointing of O/D type shrinkable end termination jointing kit for 33KV, 3CX185 sq.mm XLPE cable
1
-
26247
... More
Jointing of I/D type shrinkable end termination jointing kit for 33KV, 3CX185 sq.mm XLPE cable
1
-
21780
... More
Making of End termination jointing including supply of cable lugs, glands, tapes, socket etc of 1.1KV 4CX185 sq.mm PVC cable
4
-
851
... More
Making of End termination jointing including supply of cable lugs, glands, tapes, socket etc of 1.1KV 4CX120 sq.mm PVC cable
4
-
504
... More
Making of End termination jointing including supply of cable lugs, glands, tapes, socket etc of 1.1KV 4CX16 sq.mm PVC cable
16
-
171
... More
Making of End termination jointing including supply of cable lugs, glands, tapes, socket etc of 1.1KV 2CX10 sq.mm PVC cable
48
-
171
... More
Supply & Installation of A.C Distribution Box
1
-
44000
... More
Supply & Installation of A.C Distribution Box
1
-
54552
... More
Erection of 12KV ,1250/800A, 350MVA, 11 Panel shunt trip switchingboard with VCB, scada compatible (2IN+1BC+8OG)
1
-
72908
... More
Erection of Indoor type 33KV VCB panel
1
-
571578.72
... More
Installation of RTCC panel
2
-
10000
... More
Installation of 100 KVA 33/0.4 KV outdoor type Station service Transformers
1
-
3000
... More
Fixing of 33KV Pin Insulator
45
-
72
... More
Fixing of 33KV Disc Insulator
9
-
107
... More
Fixing of 11KV Pin Insulator
33
-
63
... More
Fixing of 11KV Disc Insulator
6
-
65
... More
Stringing of ACSR Wolf Conductor with Jointing, Hosting Etc.
0.08
-
19208
... More
Supply & Installation of Yard Lighting LED 250 WATT with Header and all accesaries with LOOP Box with EIC approved brand
1
-
12336
... More
Erection of Earthing
1
-
60000
... More
Erection of Shelding cum Lighting Structure along with Drawal of shield wire
1
-
20000
... More
Supply & Fixing SURGE ARRESTORS
4
-
5000
... More
Supply & Fixing ISOLATOR PAD TO WOLF BI-METALIC CONNECTOR
36
-
900
... More
Fixing of 11KV TPGO Isolator
5
-
1193
... More
Fixing of Danger Board 33KV & 11KV
24
-
136.71
... More
Fixing of stay set complete
4
-
641
... More
Eration of earth Spike
8
-
313
... More
Supply of M.S. Flat 75X8MM (Make: SAIL)
3.14
-
66713
... More
Supply of M.S. Flat 65X6MM (Make: SAIL)
1.6
-
67378
... More
Supply of G.I Pipe of 40mm I/D & 50 mm O/D 3MTR. Long heavy duty (ISI mark) with perforation of 12mm diameter each with suitable G.I Clamp (Pattern of Perforation will be made as per drawing attached)
50
-
1383
... More
Supply of Sodium Based Bentonite Powder (IS:2911-(PART-1/SEC-2)1979)
183
-
7000
... More
Mixing of Bentonite powder with low resistivity foreign soil at the ratio of 1:3 for trench for the strip of earth mat
1
-
60999.39
... More
Laying of earth strip by M.S. Flat 75x8 mm on 600mmx600mm depth & M.S. Flat 65X6MM for Rising, Welding & Bolting ( jointing of earth strip & Risire by 125mm laping and painted on all welded portion by zinc chromate paint)
1
-
53988.91
... More
Erection of Earth Rods, a pit of 600mm x600mmx 3mtr. is required to be dug. The ground electrode is placed at the centre of Pit. The sorrounding volume is back filled with Bentonite suspension formed by mixing Bentonite with large quantity of water .the bentonite to earth ratio may be 1:1 (Construction of earth pit 300mmx 300mmx300mm by brick and RCC Checkers plat for top of earth pit)
20
-
5500
... More
Erection of Earth Rods, a pit of 600mm x600mmx 3mtr. is required to be dug. The ground electrode is placed at the centre of Pit. The sorrounding volume is back filled with Bentonite suspension formed by mixing Bentonite with large quantity of water .the bentonite to earth ratio may be 1:1
30
-
5000
... More
Earth work excavation including removing & spreading within 75mtr. Lead
608
-
119.27
... More
Earth work filling with good earth having resistivity of around 30Ω-Mtr
456
-
77.54
... More
Excavation & Carried good earth within redious upto 5 to 10km
456
-
491.79
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements