West Bengal Industrial Development Corporation Tender

Laying, Testing and Commissioning of following sizes XLPE power cable of 1.1KV grade Al. armoured direct in ground at a depth 750mm below GL including excavation, sand cushioning, protective covering with bricks and refilling the trench etc. as required.

3.5C X 25 Sq.mm XLPE (Item as PWD SOR F-2 / 1 a.)

b) 2C X 10 Sq.mm XLPE (Item as PWD SOR F-2 / 1 a.)

Supplying and making cable end termination of following XLPE insulated Al. armoured cables of 1.1KV grade including cost of aluminium lugs, single compression glands, insulation tape and all requisite material as required.

3.5C X 25 Sq.mm XLPE (Item as PWD SOR F-5 / 8b-iii. And F-4 / 7d)

2C X 10 Sq.mm XLPE (Item as PWD SOR F-5 / 8b-xiii and F-4 / 7a.)

Wiring for pole light connection with 3 x 1.5 Sq.mm PVC insulated stranded copper conductor wire including testing, commissioning and all necessary doings complete as required. (Item as PWD SOR E-1 / 1.e )

Supplying and embedding of following dia GI pipe (Medium Class) for road crossing cable entry including excavation of metal road of 1M depth, refilling and all necessary doings complete asequired.

100mm dia (Item as PWD SOR F-6 /10-g)

Supplying and embedding following dia G.I. pipe (medium class) in pole collar / Foundation (during casting) for cable entry including bending the pipe to required shape complete as required.

40mm dia (Item as PWD SOR F-6 / 10-c)

Supply & fixing of GI Octagonal Single Arm Pole designated 410-SP-32 of approved make (top dia 70 mm, Bottom dia 155 mm and base plate 12 mm thik having 3mm thinkness with single arm bracket (1 mtr length) with approved painting over red oxide on RCC foundation including the cost of foundation, foundation bolts, excavation and backfilling complete in all respect.

9.0 Meter Long

Supply & fixing of GI Octagonal Double Arm Pole designated 410-SP-32 of approved make (top dia 70 mm, Bottom dia 155 mm and base plate 12 mm thik having 3mm thinkness with double arm bracket (1 mtr length) with approved painting over red oxide on RCC foundation (1:3:6) including the cost of foundation, foundation bolts, excavation and backfilling complete in all respect.

9.0 Meter Long

Supplying Installation Testing & commissioning of out door type of moulded case SMC pole mounted cable end termination/junction box (IP-65) of size 200 X 160 X 98 mm (in side) with connector terminals (16/25 Sqmm) with hinge type lockable door complete with 2 sets of 25 mm X 3 mm thick GI strip clamp for mounting on pole/ street light standard with 1 No. 2 Amps SPMCB ‘C’ seires. (Item as PWD SOR H-5 / H5 and D-6 / 7.)

Providing, installation, testing & commissioning of outdoor feeder piller fabricated with 2 mm thick CRCA sheet of suitable size covered with double door front and back housing with rain protected conopy godown lock, base angle mounting structure fabricaed from 35mm x 35mm x 5mm thick angle and 25 mm x 5 mm flat iron grouded with cement concreate duly phosphatised, compartmentalised painted complete with providing and fixing following switch gear and accessories there in earthing connection, interconnection etc. as required with removal gland plate for entry of cable from bottom. a) 63 Amp, 25 KA, 415 Volt, 4 pole MCCB with spreader links & rotary handle- 1 No. b) 63 Amp, 415 V FP Al. bus bar with DNC/SNC bus bar support & insulator, color coated heat shrinkable insulation - 1 set. c) 32 A four pole 10 KA MCB -1 No. d) 20 A DP 10 K MCB -3 Nos. e) Digital Voltmeter with selector switch - 1 set. f) Digital Ammeter with selector switch & CTs - 1 set g) Digital KW meter - 1no. h) Phase indicating LED with toggle switch & fuse - 1 set. i) Multifunctional digital time switch with 4 pole 32 Amp power contractor - 1 set. (Time Switch to be automatic switching ON & OFF of street lights at Sun set and Sun rise or twilight, Auto ON, Auto Off, Auto modes with manual override facility with 12/24 hours display format programming at site.)

Supply and fixing of 70W LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 70W confirming to IP 66 Protection complete in all respect.

Supply and Fixing water proof Cable End Box / Junction Box, IP 65 with MS enclosure including 2A MCB, C-Curve in din rail complete with necessary clamp and accessories as required. (Item as PWD SOR D-5 / 7)

S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. (Item as PWD SOR G-1 / 2a.)

Supply and Fixing water proof Cable End Box / Junction Box, IP 65 with MS enclosure including 2A MCB, C-Curve in din rail complete with necessary clamp and accessories as required. (Item as PWD SOR D-5 / 7)

GST @ 12 % on Total Value

Labour Wellfare Cess @ 1%