Uttar Banga Krishi Viswavidyalaya Tender

Wall bench with Under storage: 2480 W x 770 D x 900 H in mm

Wall bench with Under storage: 2480 W x 620 D x 900 H in mm

Wall bench with Under storage: 5100 W x 770 D x 900 H in mm

Wall bench with Under storage: 4280 W x 920 D x 900 H in mm

Wall bench with Under storage: 1880 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack, Overhead Unit & Sink: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The unit should have removable back panels which should be easily removable (unclipped) and the service line be accessed for maintenance, it should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The Wall unit should have two nos. under storage suspended to the C frame of size (750 W x 530 D x 635 H) and (600 W x 530 D x 635 H) with a combination of 1 Drawer and 2 shutters. The cabinet should be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front is of double wall construction with sound dampening material filled inside. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. The Wall bench should have 4 nos. Welded overhead storage cabinet with glass shutters and one adjustable shelf, size of the storage should be (600 W x 340 D x 635 H - 2nos.) & (750 W x 340 D x 635 H - 2nos.) The cabine shoudl be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. Thickness: LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel should be of 1.2mm thk. Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel should be of 0.8mmthk. Finish: Powder coating pure epoxy, thickness 40-50 microns. Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm. Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism. Hinge: Knuckle-butt type SS Hinge. Screw: SS304. One sink unit to be provided covered with metal shutters, the sink should be SS sink with three-way faucets and anty syphon bottle trap. The system should have one Fixed-Type reagent rack (1500 W x 300 D x 600 H), it should be complete modular design consisting of 2 stage horizontal storage shelves made of CRCA MS with pure epoxy powder coating and having cutouts for electrical switches and sockets with two nos. 6 module plate. It should have provision for placing Granite pieces as per requirement. The work top should be Jet Black Granite: It should be 19mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness. 4280 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack, Overhead Unit & Sink: 1500 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack, Overhead Unit & Sink: 2030 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack, Overhead Unit & Sink: 1430 W x 770 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The unit should have removable back panels which should be easily removable (unclipped) and the service line be accessed for maintenance, it should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The Wall unit should have 4 nos. under storage suspended to the C frame of size (750 W x 530 D x 635 H - 1no.) and (600 W x 530 D x 635 H - 3nos.) with a combination of 1 Drawer and 2 shutters. The cabinet should be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front is of double wall construction with sound dampening material filled inside. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. The Wall bench should have 4 nos. Welded overhead storage cabinet with glass shutters and one adjustable shelf, size of the storage should be (600 W x 340 D x 635 H - 4nos.) The cabinet should be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. Thickness: LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel should be of 1.2mm thick. Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel should be of 0.8mmthk. Finish: Powder coating pure epoxy, thickness 40-50 microns. Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm. Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism. Hinge: Knuckle-butt type SS Hinge. Screw: SS304. The system should have 3 nos. Fixed-Type reagent rack (1500 W x 300 D x 600 H - 1no.) & (1200 W x 300 D x 600 H - 2no.), it should be complete modular design consisting of 2 stage horizontal storage shelves made of CRCA MS with pure epoxy powder coating and having cutouts for electrical switches and sockets with two nos. 6 module plate. It should have provision for placing Granite pieces as per requirement. The work top should be Jet Black Granite: It should be 19mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness 6790 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 5290 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 5300 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 1280 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 2415 W x 620 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 2480 W x 620 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 4690 W x 620 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 3200 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 2780 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 2480 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 3430 W x 770 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 1580 W x 920 D x 900 H in mm

Wall bench with Under storage, Reagent Rack and Overhead Unit: 5910 W x 920 D x 900 H in mm in mm

Island bench with Under storage & Reagent Rack: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The unit should have removable back panels which should be easily removable (unclipped) and the service line be accessed for maintenance, it should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The Island bench should have 4 nos. under storage suspended to the C frame of size (600 W x 530 D x 635 H - 3nos.) with a combination of 1 Drawer and 2 shutters. The cabinet should be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front is of double wall construction with sound dampening material filled inside. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. The system should have 2 nos. Fixed-Type reagent rack (1200 W x 300 D x 600 H), it should be complete modular design consisting of 2 stage horizontal storage shelves made of CRCA MS with pure epoxy powder coating and having cutouts for electrical switches and sockets with two nos. 6 module plate. It should have provision for placing Granite pieces as per requirement. The work top should be TRESPA It should be 16mm (+/- 2mm) thick. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness. 2480 W x 1540 D x 900 H in mm

Island bench with Under storage & Reagent Rack: 1580 W x 1540 D x 900 H in mm

L shaped Wall bench with Under storage, & Sink: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The unit should have removable back panels which should be easily removable (unclipped) and the service line be accessed for maintenance, it should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The Wall unit should have 2 nos. under storage suspended to the C frame of size (750 W x 530 D x 635 H - 1no.) and (600 W x 530 D x 635 H - 1no.) with a combination of 1 Drawer and 2 shutters. The cabinet should be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front is of double wall construction with sound dampening material filled inside. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. One sink unit to be provided covered with metal shutters, the sink should be SS sink with three-way faucets and any syphon bottle trap. The work top should be Jet Black Granite: It should be 19mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness. 3835 W1 x 770 D1x 2440 W2 x 600 D2 x 900 H in mm

L shaped Wall bench with Under storage: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The unit should have removable back panels which should be easily removable (unclipped) and the service line be accessed for maintenance, it should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The work top should be Jet Black Granite: It should be 19mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness. 3840 W1 x 920 D1x 680 W2 x 920 D2 x 900 H in mm

L shaped Wall bench with Under storage: 4305 W1 x 920 D1x 1240 W2 x 920 D2 x 900 H in mm

L shaped Wall bench with Under storage: 4055 W1 x 920 D1x 1540 W2 x 920 D2 x 900 H in mm

Sink unit: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. One sink unit to be provided covered with metal shutters, the sink should be SS sink with three-way faucets and any syphon bottle trap. The work top should be Jet Black Granite: It should be 19mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness. 830 W x 920 D x 900 H in mm

STOOL: Supply & placement of Revolving Stool from ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, OHSAS 18001:2007, BIFMA Certified Manufacturers and as per approved drawing & design/specification. SEAT ASSEMBLY: The seat shall be made up of 1.2±0.1cm thick flat plywood measured as per QA methpd described in OCP-QLTA-P14-18 and with moulded Polyurethane foam and are upholstered with replaceable synthetic leather covers. Seat Size: Diameter 40.0cm. Adjustments: 360° Revolving type.2.BACK ASSEMBLY: The back foam is designed with contoured Lumbar support for extra comfort. The upholstery is available in synthetic leather. BACK SIZE: 45.0cm (W) covered with polyurethane foam. 3.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/- 2 Kg/m3 and and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. 4/HEIGHT ADJUSTMENT: The manual height adjustment is very easy to operate with a help of a knob. It can be easily locked at the most comfortable position. 5.PDESTAL ASSEMBLY: The five-prong pedestal is fabricated from 0.2±0.02cm thik HR sheet (IS: DD 1079/HR). powder coated (DFT 40-60 microns) and fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. Thepedestal is 55.0±0.5cm pitch-circle diameter (65.0±1.0cm with castors). Circular foor ring of Ø52.0±0.2cm made up of Ø1.9±0.2c x 0.12±0.0096cm thk MS ERW Tube for foot support in High-base stool. 6. PDESTAL ASSEMBLY: The five-prong pedestal is fabricated from 0.2±0.02cm thik HR sheet (IS: DD 1079/HR). powder coated (DFT 40-60 microns) and fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestl is 55.0±0.5cm pitch diameter (65.0±1.0cm with castors).7.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Manufacturer should have BIFMA level 2 confirms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA, along with certificates like AIOTA, IDM, GRIHA, IAQ, SEFA & Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt) accredited organization otherwise certificates will not be accepted.

BRAVO MID BACK: Supply & placement of Mid Back Chair from ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, OHSAS 18001:2007, BIFMA Certified Manufacturers and as per approved drawing & design/specification. 1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) x58.0 cm (H). SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon. Manufacturer should have BIFMA level 2 confirms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA, along with certificates like AIOTA, IDM, GRIHA, IAQ, SEFA & Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt) accredited organization otherwise certificates will not be accepted.

FOLD TBALE: Supply & placement of Fold Table from ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, OHSAS 18001:2007, BIFMA Certified Manufacturers and as per approved drawing & design/specification. Size of the Fold Table should be (1200W x 600D x 730H)MM. WORKTOP: Made of 25mm Thick Pre-laminated twin board interior grade of approved shade conforming to IS:12823, and Edge banded with matching 2 mm thick PVC lipping. MODESTY PANEL: Made of 25mm Thick Pre-laminated twin board interior grade of approved shade conforming to IS:12823, and Edge banded with matching 2 mm thick PVC lipping. UNDER STRUCTURE: Legs are made of 50mm x 30mm x 1.6mm thk M.S. electric resistance welding tube as per IS:7138 and 10mm thick HR steel as per IS 2062 welded together and powder coated with min 45 micron thickness of epoxy polyester coating. Modesty holding Leg frame is made of made of 50mm x 30mm x 1.6mm thk M.S. electric resistance welding tube as per IS:7138 and 3mm thick HR steel as per IS 2062 welded together and powder coated with min 45 micron thickness of epoxy polyester coating. Cross member assembly for top is made of made of 50mm x 30mm x 1.6mm thk electric resistance welding tube as per IS:7138 and 3 mm thick HR steel as per IS 2062 welded together and are powder coated with min 45 micron thickness of epoxy polyester coating. Pull handle made of Ø16.0 x 1.2mm thk M.S. electric resistance welding tube as per IS:7138, powder coated with min 45 micron thickness of epoxy polyester coating. Housing bracket assembly is made of 3 mm thick HR steel as per IS 2062 welded together and is powder coated with min 45 micron thickness of epoxy polyester coating. Housing bracket carries mechanism for folding table made of 10mm thick HR steel as per IS 2062. Understructure is provided with Ø 65mm lockable Castors for ease of movement and can be locked when required at any position. Manufacturer should have BIFMA level 2 confirms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA, along with certificates like AIOTA, IDM, GRIHA, IAQ, SEFA & Green Guard Certification for few of its products. All the ISO certificates should be obtained from NABCB (Central Govt) accredited organization otherwise certificates will not be accepted. 1200 W x 600 D in mm

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. b) Extra rate for each addl. Floor over the rate of ground floor

Dismantling all types of plain cement concrete works,stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. a) upto 150 mm. Thick.

Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. a) In ground floor including roof.

Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. b) Extra rate for each addl floor over the rate of ground floor.

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. (ii) With 1:4 cement mortar. (b) 15 mm thick plaster.

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand. (1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor). (a) One Coat. i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) (Two coats). ii) Luxury Quality

Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (a) in brick wall [Cement-3.6 Kg/Mtr]

Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (b) in concrete wall [Cement-3.6 Kg/Mtr]

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor) II) With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm [Applied directly over finished artificial stone floor/ mosaic etc.]. (B) Light Colour.