Uttar Banga Krishi Viswavidyalaya Tender

Component-B: Procurement & Installation of interior Furniture & Furnishing for Offices & Utility area including allied Civil work (General Furniture).

Wall bench with Under storage: The structure should be made from metal C frame and horizontal members, all sheet metal components should be of CRCA confirming to IS Code 513:1994. C-frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. The C-frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The horizontal members should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 60 x 30 x 2 mm. They should be made of CRCA MS and coated with pure epoxy powder. All frame-work is should be pre-treated with superior pure epoxy powder coated finish. The unit should have removable back panels which should be easily removable (unclipped) and the service line be accessed for maintenance, it should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The Wall unit should have 4 nos. under storage suspended to the C frame of size (600 W x 530 D x 635 H) with a combination of 1 Drawer and 2 shutters. The cabinet should be welded body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should be of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front is of double wall construction with sound dampening material filled inside. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. The work top should be Jet Black Granite: It should be 19mm (+/- 2mm) thick Jet-Black Granite worktop. The exposed edges of the worktop should be chamfered and smoothened. The bottom of the worktop should be polished and there should be a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The backing material should be used is a neoprene mat of 6 mm thickness. 4600 W x 770 D x 900 H in mm

Wall bench with Under storage: 3080 W x 920 D x 900 H in mm