Uttar Banga Krishi Viswavidyalaya Tender

DUAL DESK FOR EXAMINATION HALL (1200W X 915D X 750H). DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm :- 18 mm thick prelaminated Particle Board Material of Support Structure or Side Pannel :- Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Height of Desk Top in mm (±5 mm):- 750 Width of Desk Top in mm (± 5 mm) :- 400 Length of Desking , Seating in mm (±10 mm):- 1200 SEATING SPECIFICATIONS Material of Seat (+/- 2 mm (For back rest +/- 4 mm):- 18 mm thick prelaminated Particle Board. Material of Support Structure:- Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum. Width of Seating in mm (±10 mm):- 290. Height of Seat in mm (±10 mm):- 452.Colour of finish:- As per buyer's choice. Desk top finishing:- All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue.Distance between Tabletop edge and Seat edge in mm (+/- 5 mm):- 250.

DUAL DESK FOR CLASSROOM (1050W X 915D X 750H). Two Seater Desk Overall size :- 1050 (W)mm X 915 (D)mm X 750 (H)mm , Colour as per approved laminate shades. Desk Top 450W mm X 300D mm X 18mm shall be made of ISI Marked particle board having postforming on both long sides and other two sides 2mm thick PVC edge bending tape with hot melt glue on through feed edge bending machine , edge band must be trimmed on edges and corners. Green Pro, Green Co Silver, BIFMA Membershisp as per ANSI for some of it products & ISO 9001-2015, ISO 14001-2015, ISO 45001-2018, ISO 50001-2011,AIOTA Certification for Educational furniture range for ergonomic design . Metal shelf cum modesty made up of 0.8mm thick CRCA sheet, shelf should be covered on front side as per image. Bag hook should be providing on RHS & LHS made of 4mm dia rod. Under Structure made up of combination of 50X25X1.2mm pipe & Top supported on 25X25X1.2mm thick pipe , one number of tie member on front frame position , Desk feet made of 50X25X1.2mm thick pipe , high quality PPCP buffer should be used on bottom for avoiding scratches on the floor , All Side duly Welded With Vertically & Horizontally Metal Pipe powder coated , Desk should be in Knock-down condition , all open pipe end should be covered by PPCP Cap , all welding should be CO2 MIG Welding to minimise rusting on welding area , Complete structure should be free from all welding defects such as sharp edges , burr etc , All metal components should be pre treated with zinc phosphating in minimum 7 tank process and then powder coated with epoxy polyster , thickness of coating should be minimum 50 Microns . Two Seater Bench Overall size :- 1050 (W)mm X 915 (D)mm X 750 (H)mm , Seat height from floor 380mm , colour as per approved Powder coating and laminate shades .Desk Seat and Back made of 18mm thick ISI marked PLPB board with edges must be sealed with 2mm thick PVC edge bending tape with hot melt glue on through feed edge bending machine , edge band must be trimmed on edges and corners .Under Structure made up of combination of 50x25 X1.2mm & 25x1.2mm thick pipe , Chair feet made of 50x25x1.2 mm thick , high quality PPCP buffers should be used on bottom for avoiding scratches on the floor , All Side duly Welded With Vertically & Horizontally Metal Pipe powder coated , all open pipe end should be covered by PPCP Cap , all welding should be CO2 MIG Welding to minimise rusting on welding area , Complete structure should be free from all welding defects such as sharp edges , burr etc , All metal components should be pre treated with zinc phosphating in minimum 7 tank process and then powder coated with epoxy polyster , thickness of coating should be minimum 50 Microns.

LIBRARY TABLE OF 4 SEATER WITH GLASS DIVIDER 1200W x 900D x 770H. Table Top 25mm Thick PLPB Board as Per Approved Laminate Shade. Total Height Of The Library Table 770mm. Metal Structure Width 1150mm & 850mm Depth. Understructure Made Of Prime Quality CRCA 25x25mm Square Metal Pipe. Perforated Modesty Panel 0.8mm Thick CRCA Metal Sheet with 25 mm square pipe boundry. Glass Divider on Table Table Top & Upper Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. Understructure CRCA Metal Pipe 25X25mm With 1.2mm Thick Four Side Welded With Vertically Metal Pipe. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. All Metal Shall Be Powder Coated After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust. Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Coating thickness must be between 60 to 80µ.