Public Works Roads Department Tender

Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).For WBM Surface with primer @ 0.85 kg/Sq.m.

Providing and laying Bituminous Profile Corrective Course using Mobile Hot Mix Plant (Light Duty) and using aggregates of Grading-2 ( 22.4 mm Stone Chips @ 0.4241m3/m3, 13.2 mm Stone Chips @ 0.2827m3/m3, 11.2 mm Stone Chips @ 0.3534 m3/m3, 5.6 mm Stone Chips @ 0.2121m3/m3, Stone Dust with Grit @ 0.1414m3/m3) of Table-33 premixed with 75kg of bitumen per cum, transported to site laid over a previously prepared surface at specified laying temperature to the required grade, level and alignment, as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen,hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, including tack coat using cationic bitumen emulsion @ 0.25 kg/m2 and quality control complete as per direction of Engineer-incharge. Considering 40 mm Ava. Th.

Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen [VG 30(Packed)] (@ 1.46 Kg./m2), carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants & cost of appling of Tack Coat @ 0.25Kg./m2 etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.

Providing and laying Premixed Seal Coat (Type B) with approved quality S/Grit @ 0.6 m3/ 100 m2 and Bitumen binder @ 0.68Kg./m2 on thoroughly cleaned black top surface freshly laid 20 mm P.C., including heating and mixing cleaned s/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).By Manual Means With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.); over freshly laid 20 mm P.C.

GST @ 12.00% over Sl. No. 1 to Sl. No.7

LWC @ 1.00% over Sl. No. 1 to Sl. No. 8