Public Works Department Tender

Add Labour Welfare Cess @ 1%

Providing and laying bituminous concrete with Hot Mix Plant using crushed aggregates, filler materials (cement / hydrated lime / Rock dust) and premixed with bituminous binder of specified grading @ 5.2% (min) for Grading –1 and @ 5.4% (min) for Grading –2 as per table 500-17 and mix design done as per table 500-10 and Job Mix Formula as per clause 505.3.3 of MoRT&H (5th Revision), including screening, cleaning of chips and preparing a uniformed and quality mix , transporting the hot mix to work site, laying the mixed materials at specified laying temperature, as specified in table 500-2 with a hydrostatic paver finisher with sensor control to the required grade, level and alignment over prepared surface coated with tack coat, rolling with smooth wheeled and vibratory or tandem rollers or with a pneumatic tyre roller of 12 to 15 tonne weight with a tyre pressure of at least 0.56 MPa , to achieve the desired density as per clause 505.3.5 , including cost and carriage of bitumen, crushed aggregates, filler materials and hire charges of machinery and equipment for construction and quality control, complete as per clause 507 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For Grading - 2 : (10 mm nominal size). 30mm compacted thick Using Batch Type HMP of minimum capacity 100-120 TPH. Using Pakur Variety Stone Aggregates and V.G-40 (Bulk) Grade Bitumen.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). 80 cm x 60 cm rectangular.