Public Works Department Tender

Impress Table 6' Supply & placement of Godrej make Impress Main Desk as per approved drawing & design / specification of EIC .The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H.The quoted product should be from a certified member of BIFMA(Certificate to be enclosed) and should be following managment systems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007 ,AIOTA, Greenguard Certification(Certificate to be enclosed) procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products.

Kareena Mid Back Supply ,Fitting & Fixing of Godrej make chair Kareena Mid Back chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design / specification. .The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 5 steps and also has swivel adjustment of 22 degree+/-2 on both sides. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee tilt synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, Seat/Back tilting ratio of 1:2. Seat depth adjustment of 6.0+/-0.5cm should be locked in 6 positions. The backrest shall consists of a sliding up down mechanism, Which can be adjusted in the range of 7.5+/-0.5cm and should be locked in 4 positions for correct position of lumber support.The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestial shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Height from ground - min 89.0 to max 105.0cm. Seat height - min 46.5 to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Bravo Visitor Supply & placement of Bravo Visitor chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design .Dimension 61.4 cm. (W), 64.5 cm. (D), 89.5 cm (H) , 46.5 cm. (SH) .Greenguard certified 100% VOC free powder coating, Knock-down design reducing transportation emissions, Designed for long life and easy part replacement 99% recyclable. The seat and back are made up of 1.2 plus / minus 0.1 thick hot -pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The HR polyurethane foam is moulded with density = 45 plus/minus 2 kg/m3 and hardness load 16+_ 2kgf as per IS:7888 for 25% compression. The one -piece armrests are injection moulded from black Co-polymer Polypropylene. The powder coated (DFT 40-60 microns )tubular frame is cantilever type & made of 2.54 plus /minus 0.03cm. X 0.2 plus /minus 0.016cm. Thk. M.S.ER.W.Tube The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products,