Public Health Engineering Department Tender

Payment of Supply & Laying of 15 mm NB PVC (Schedule 80)/ 20 mm OD HDPE ( PE 100, PN 16) Pipe with all necessary , specials 1.00 mtr below the gorund will be made on actual measurement basis.The rate of this item is Rs. 117.00 /Mtr

Supply and Delivery of 10 mm NB Gunmetal Ferrule Confirming to IS 2692:1989 with latest ammendments

Supplying, laying, fiting, fixing and jointing of UPVC pipes conforming to IS:4985-2000 with latest revision and amendments, if any, including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder ,road sub-grade and its flanks but excluding moorum and laterite or sand stonehard arock including cutting of brick pavement without damaging the existing telephone/electrical cable line etc.(in case of damage of any type of cable line during excavation, necessary damaged charges as applicable by the respaective authority will be borne by the agency in his own cost. Loading, unloading, carrying of pipes, specials, valves from the local store to work site and lowering laying of pipes specials valves carefully in trenches maintaining proper levels and alignment ,jointing the pipe , specials and valves including supplying of good quality/approved brand solvent cement (as per IS:14182-1994 including cost of all fabricated PVC fitting i.e. tees,bend, reducers, adopter etc.as per IS:101-1988 and making flange joints including supplying required quantity of nuts, bolts and rubber insertion (CIDF sluice valves will be supplied by the department free of cost) as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150mm thk. with maintaining an average depth of .cushion of 1.10mtr. from the top of pipe line including making interconnection with distribution pipes etc. all complete as per drawing direction and satisfaction of the E.I.C.

Pressure Rating class - III

Laying of pipe line including cost of pipe & fittings/specials but excluding cost of valves.

75 mm dia. O.D.

63 mm dia. O.D.

N.B. :-

Manufacturer’s test certificate for UPVC pipe & specials to be produced before laying of pipe line.

3rd party inspection of UPVC pipe & specials to be done by CEPET or (India) SGS/NTH Kolkata or as per direction of EIC as per approved vender list.

No part payment at any stage on account of supply of materials shall be entertained.

Payment will be made on actual consumption of materials.

UPVC pipes for the works to be supplied as per approved vendor list and as per direction & satisfaction of EIC. No pipes will be allowed beyond recommendated vendor list.

Submission of drawing of pipe line with statement of materials consumed between node t node oints againts each RA & Final bill if so.

Any deviation from required clear cover of 1.10 mtr.due to site adverse condition, prior permission is to be obtained from EIC and deduction for such work will be made on prorata basis over the rate of entire item.

All pipe connection shall be completed in all respect and as per directionof EIC. Decision of EIC in this respect is final & binding. In case of any deviation/or any left out pipe connections an amount of Rs.10,000.00 for each pipe connection will be realized/recovered from the bill.

Filling the pipe line with water, testing hydraulically as per I.S 3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3 , if contractor used water from deptt. source).

For UPVC/HDPE Pipe

75 mm dia (OD)

63 mm dia (OD)

Making Village road (average 3m width) crossing by horizontal auger boring for Accomodation of laying of average 3 (three) nos. 15 mm dia GI pipes for FHTC or as per direction of Engineer In Charge.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately

For Exposed Work

15 mm dia. medium quality

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

In ground floor including roof.

upto 150 mm. thick

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m

In ground floor including roof.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Pakur Variety(75 KM)

Add. @ 12 % GST Rs.

Add. @ 1 % CESS Rs.