Municipal Affairs Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Municipal Affairs Department - MAD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date22 Jan 2025
Closing Date15 Feb 2025
Tender Amount₹ 8,44,68,576
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender can be calculated using the formulas: - Minimum value of completed work = 30% of estimated amount put to tender
- Minimum value of each of 2 completed works = 25% of estimated amount put to tender
- Minimum average annual turnover = 30% of amount put to tender Additionally, the bid capacity can also be determined by the formula: (A x N x 2 – B), where A, N, and B are variables that need to be calculated based on the provided information. However, the exact estimated amount put to tender is not specified, which is necessary to calculate the specific bid capacity required in terms of value. But the bid capacity required can also be understood as:
- Earnest Money: 2% of the Estimated Amount put to Tender or Rs 10 Lakh, whichever is lower.
- Security Deposit: 10% of the value of works executed, which includes the Earnest Money already deposited. And Minimum Bid-capacity = Estimated amount put to tender. Since we have formulas and a relation with the estimated amount, the answer is found.
Technical Capacity
... View More
The bidder should have prior work experience in similar nature of work, with specific requirements as follows: I. The bidder should have completed work of minimum value of 30% of the estimated amount put to tender during 5 years prior to the date of issue of the tender.
II. Alternatively, the bidder should have completed 2 similar nature of works, each of minimum value of 25% of the estimated amount put to tender during the last 5 years.
III. The bidder should have completed one single running work of similar nature which has been completed to the extent of 75% or more and value of which is not less than the desired value at (i) above.
The estimated amount, date of completion of project, and detail communicational address of the client must be indicated in the Credential Certificate. The Credential Certificate should be accompanied by Work Order, Price Schedule, and Payment Certificate of the respective work.
Additionally, the bidder should have an Average Annual Turn Over during the last 5 years, which should be at least 30% of the Amount put to tender, and a valid Bank Solvency Certificate, which should be at least 30% of the Amount put to tender.
The available Bid-capacity of the prospective applicant should not be less than the estimated amount put to tender. The bidder is required to have prior work experience in projects similar in nature to the works, with more than 30% of the project cost executed during the last 5 years, and provide a list of projects completed that are similar in nature to the works. The bidder should have prior work experience of a similar nature, with a minimum value of 30% of the estimated amount put to tender, completed during the 5 years prior to the date of issue of the tender.
Costs
EMD
₹ 16,89,372Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Sinking Of 20 Nos Tube Well Of Size 300x200 Mm Dia. And 146 Mtr. Deep By Direct Rotary Rig Method Using Upvc Pipes. Boundary Wall 40 Mtr Each With One Number Gate For Each Tube Well At Zone -1,2 And 3 Size -(10 X 10) Sqm Each. Pump Room As Per De
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MAD_804930_1Tender No
17/AMRUT 2.0/SE(CC)/2024-25/2nd CallTender Authority
Municipal Affairs Department ViewPurchaser Address
-Website
http://http://www.wburbanservices.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
ii) From 60 Mtr. to 90 Mtr.
180
487
87660
... More
iii) From 90 Mtr. to 120 Mtr.
180
535
96390
... More
iv) From 120 Mtr. to 150 Mtr.
156
589
91884
... More
2) Rate for reaming by 12-1/4 " dia. bit i) From 6 Mtr. to 60 Mtr.
324
123
40143.6
... More
ii) From 60 Mtr. to 90 Mtr.
180
136
24544.8
... More
iii) From 90 Mtr. to 120 Mtr.
180
149
26989.2
... More
iv) From 120 Mtr. to 150 Mtr.
156
164
25727.52
... More
3) Rate for reaming by 15 " dia. bit .
i) From 6 Mtr. to 60 Mtr.
324
141
45878.4
... More
ii) From 60 Mtr. to 90 Mtr.
180
155
28051.2
... More
iii) From 90 Mtr. to 120 Mtr.
180
171
30844.8
... More
iv) From 120 Mtr. to 150 Mtr.
156
188
29402.88
... More
4) Rate for reaming by 17.5 " dia. bit .
i) From 6 Mtr. to 60 Mtr.
324
177
57348
... More
ii) From 60 Mtr. to 90 Mtr.
180
194
35064
... More
iii) From 90 Mtr. to 120 Mtr.
180
214
38556
... More
iv) From 120 Mtr. to 150 Mtr.
156
235
36753.6
... More
Supply and delivery of UPVC pipe (CD) conforming to IS 12818:2010. (CIPET Certified) 300 mm. dia.
300
6206
1861800
... More
200 mm. dia.
396
2895
1146420
... More
Supply and delivery of UPVC Deep Well Screen (RDS) Pipes with Ribs conforming to IS 12818:2010 .(CIPET Certified)
180
4398
791640
... More
Supply and delivery of UPVC Reducer 300mmX250mm ( Ref. PHED SOR Corri on 28.2.22)
6
4250
25500
... More
250mmX200mm ( Ref. PHED SOR Corri on 28.2.22)
6
1967
11802
... More
Supply and delivery of UPVC End Cap
200 mm. dia.
6
1372
8232
... More
300 mm dia
6
2297
13782
... More
Supply and delivery of M.S. Housing clamp 250 mm dia.
[Ref. PHED SOR Civil, Pg.-TW-3 , It-15]
6
3252
19512
... More
Supply and delivery of M.S .Centre guide (Special Type).
[Ref. PHED SOR Civil, Pg.-TW-3 , It-16]
72
950
68400
... More
Supply and delivery of Washed gravels size ranging from 1.80 mm to 4.74 mm. conforming to IS 4097 : 1967
[Ref. PHED SOR Civil, Pg.-TW-3 , It-17]
67.2
3810
256032
... More
Electro-logging charge.
[Ref. PHED SOR Civil, Pg.-TW-3 , It-19]
6
15715
94290
... More
Lowering the tube well assembly (UPVC Casing pipe ,well pipe, strainer along with UPVC accessories) vertically in a position with proper lowering arrangement by applying necessary jointing compound including labour cost for subsequent gravel packing and machine operation cost etc.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-4]
6
26571
159426
... More
Cost of Consumables for drilling rigs and machineries.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-5]
6
22077
132462
... More
Development (Min. 8 Hr. continuous) of tube well by using suitable air compressor (Min. Capacity: 600CFM & operating Pressure 14 Bar) followed by yield testing with BHT pump (Head :45 to 50mtr.,Discharge :1100 to 1000 LPM and 25 BHP engine) all complete including To & Fro Transportation cost and Cost of fuels, lubricants & Labour etc.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-6]
6
56908
341448
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming
to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239
(Part - I)
Nipple (300 mm long ) 200 mm
6
681
4086
... More
Water sample collection and chemical test including Arsenic Test.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-7]
6
2425
14550
... More
Transportation cost of drilling equipment and accessories rig machine etc. including cost of fuel,Lubricant & loading unloading the materials from store/stack yard /suppliers godown and unloading /stacking the same at site. (Upto 60.0 km distance.)
[Ref. PHED SOR Civil, Pg.-TW-2 , It-8]
6
59786
358716
... More
Supply and delivery of Bentonite Powder conforming to IS 6186 :1986 [Ref. PHED SOR Civil, Pg.-TW-3 , It-18]
12
13963
167556
... More
Add GST @ 18%
1
1205844
1205844.84
... More
Add labour welfare cess @ 1%
1
79049
79049.82
... More
For Zone No.-4 and 7 Tube Well Number 4 Nos. for each zone , total 8 nos TW
-
-
-
... More
Site Preparation, Temporary Latrine, Placement & levelling of Rig Machine, Mast hoisting and Casing drilling (Upto 6 mtr.) Placement of Casing with all allied works necessary to commence drilling woks and wind up of all machineries after completion of Drilling.
[Ref. PHED SOR Civil, Pg.-TW-1 , It-1]
8
64146
513168
... More
Drilling by Direct Rotary method of drilling using 9 7/8” dia.bit for pilot bore follwed by subsequently reaming using 12 1/4” dia. ,15 " dia. and 17.5" dia. Rock Roller Bits/Drag Bits in consolidated, semi consolidated and soft formation up to required depth including casing boring and casing lowering as required including cost of fuels and lubricants etc. as required for drilling.
1) Rate only for pilot drilling
i) From 6 Mtr. to 60 Mtr.
432
442
191160
... More
ii) From 60 Mtr. to 90 Mtr.
240
487
116880
... More
iii) From 90 Mtr. to 120 Mtr.
240
535
128520
... More
iv) From 120 Mtr. to 150 Mtr.
208
589
122512
... More
2) Rate for reaming by 12-1/4 " dia. bit i) From 6 Mtr. to 60 Mtr.
432
123
53524.8
... More
ii) From 60 Mtr. to 90 Mtr.
240
136
32726.4
... More
iii) From 90 Mtr. to 120 Mtr.
240
149
35985.6
... More
iv) From 120 Mtr. to 150 Mtr.
208
164
34303.36
... More
3) Rate for reaming by 15 " dia. bit .
i) From 6 Mtr. to 60 Mtr.
432
141
61171.2
... More
ii) From 60 Mtr. to 90 Mtr.
240
155
37401.6
... More
iii) From 90 Mtr. to 120 Mtr.
240
171
41126.4
... More
iv) From 120 Mtr. to 150 Mtr.
208
188
39203.84
... More
4) Rate for reaming by 17.5 " dia. bit .
i) From 6 Mtr. to 60 Mtr.
432
177
76464
... More
ii) From 60 Mtr. to 90 Mtr.
240
194
46752
... More
iii) From 90 Mtr. to 120 Mtr.
240
214
51408
... More
iv) From 120 Mtr. to 150 Mtr.
208
235
49004.8
... More
Supply and delivery of UPVC pipe (CD) conforming to IS 12818:2010. (CIPET Certified) 300 mm. dia.
400
6206
2482400
... More
200 mm. dia.
528
2895
1528560
... More
Supply and delivery of UPVC Deep Well Screen (RDS) Pipes with Ribs conforming to IS 12818:2010 .(CIPET Certified)
240
4398
1055520
... More
Supply and delivery of UPVC Reducer 300mmX250mm ( Ref. PHED SOR Corri on 28.2.22)
8
4250
34000
... More
250mmX200mm ( Ref. PHED SOR Corri on 28.2.22)
8
1967
15736
... More
Supply and delivery of UPVC End Cap
200 mm. dia.
8
1372
10976
... More
300 mm dia
8
2297
18376
... More
Supply and delivery of M.S. Housing clamp 250 mm dia.
[Ref. PHED SOR Civil, Pg.-TW-3 , It-15]
8
3252
26016
... More
Supply and delivery of M.S .Centre guide (Special Type).
[Ref. PHED SOR Civil, Pg.-TW-3 , It-16]
96
950
91200
... More
Supply and delivery of Washed gravels size ranging from 1.80 mm to 4.74 mm. conforming to IS 4097 : 1967
[Ref. PHED SOR Civil, Pg.-TW-3 , It-17]
89.6
3810
341376
... More
Electro-logging charge.
[Ref. PHED SOR Civil, Pg.-TW-3 , It-19]
8
15715
125720
... More
Lowering the tube well assembly (UPVC Casing pipe ,well pipe, strainer along with UPVC accessories) vertically in a position with proper lowering arrangement by applying necessary jointing compound including labour cost for subsequent gravel packing and machine operation cost etc.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-4]
8
26571
212568
... More
Cost of Consumables for drilling rigs and machineries.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-5]
8
22077
176616
... More
Development (Min. 8 Hr. continuous) of tube well by using suitable air compressor (Min. Capacity: 600CFM & operating Pressure 14 Bar) followed by yield testing with BHT pump (Head :45 to 50mtr.,Discharge :1100 to 1000 LPM and 25 BHP engine) all complete including To & Fro Transportation cost and Cost of fuels, lubricants & Labour etc.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-6]
8
56908
455264
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming
to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239
(Part - I)
Nipple (300 mm long ) 200 mm
8
681
5448
... More
Water sample collection and chemical test including Arsenic Test.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-7]
8
2425
19400
... More
Transportation cost of drilling equipment and accessories rig machine etc. including cost of fuel,Lubricant & loading unloading the materials from store/stack yard /suppliers godown and unloading /stacking the same at site. (Upto 60.0 km distance.)
[Ref. PHED SOR Civil, Pg.-TW-2 , It-8]
8
59786
478288
... More
Supply and delivery of Bentonite Powder conforming to IS 6186 :1986 [Ref. PHED SOR Civil, Pg.-TW-3 , It-18]
16
13963
223408
... More
Add GST @ 18%
1
1607793
1607793.12
... More
Add labour welfare cess @ 1%
1
105399
105399.78
... More
For Zone No.-5 and 6 Tube Well Number 3 Nos. for each zone , total 6 nos TW
-
-
-
... More
Site Preparation, Temporary Latrine, Placement & levelling of Rig Machine, Mast hoisting and Casing drilling (Upto 6 mtr.) Placement of Casing with all allied works necessary to commence drilling woks and wind up of all machineries after completion of Drilling.
[Ref. PHED SOR Civil, Pg.-TW-1 , It-1]
6
64146
384876
... More
Drilling by Direct Rotary method of drilling using 9 7/8” dia.bit for pilot bore follwed by subsequently reaming using 12 1/4” dia. ,15 " dia. and 17.5" dia. Rock Roller Bits/Drag Bits in consolidated, semi consolidated and soft formation up to required depth including casing boring and casing lowering as required including cost of fuels and lubricants etc. as required for drilling.
1) Rate only for pilot drilling
i) From 6 Mtr. to 60 Mtr.
324
442
143370
... More
ii) From 60 Mtr. to 90 Mtr.
180
487
87660
... More
iii) From 90 Mtr. to 120 Mtr.
180
535
96390
... More
iv) From 120 Mtr. to 150 Mtr.
156
589
91884
... More
2) Rate for reaming by 12-1/4 " dia. bit i) From 6 Mtr. to 60 Mtr.
324
123
40143.6
... More
ii) From 60 Mtr. to 90 Mtr.
180
136
24544.8
... More
iii) From 90 Mtr. to 120 Mtr.
180
149
26989.2
... More
iv) From 120 Mtr. to 150 Mtr.
156
164
25727.52
... More
3) Rate for reaming by 15 " dia. bit .
i) From 6 Mtr. to 60 Mtr.
324
141
45878.4
... More
ii) From 60 Mtr. to 90 Mtr.
180
155
28051.2
... More
iii) From 90 Mtr. to 120 Mtr.
180
171
30844.8
... More
iv) From 120 Mtr. to 150 Mtr.
156
188
29402.88
... More
4) Rate for reaming by 17.5 " dia. bit .
i) From 6 Mtr. to 60 Mtr.
324
177
57348
... More
ii) From 60 Mtr. to 90 Mtr.
180
194
35064
... More
iii) From 90 Mtr. to 120 Mtr.
180
214
38556
... More
iv) From 120 Mtr. to 150 Mtr.
156
235
36753.6
... More
Supply and delivery of UPVC pipe (CD) conforming to IS 12818:2010. (CIPET Certified) 300 mm. dia.
300
6206
1861800
... More
200 mm. dia.
396
2895
1146420
... More
Supply and delivery of UPVC Deep Well Screen (RDS) Pipes with Ribs conforming to IS 12818:2010 .(CIPET Certified)
180
4398
791640
... More
Supply and delivery of UPVC Reducer 300mmX250mm ( Ref. PHED SOR Corri on 28.2.22)
6
4250
25500
... More
250mmX200mm ( Ref. PHED SOR Corri on 28.2.22)
6
1967
11802
... More
Supply and delivery of UPVC End Cap
200 mm. dia.
6
1372
8232
... More
300 mm dia
6
2297
13782
... More
Supply and delivery of M.S. Housing clamp 250 mm dia.
[Ref. PHED SOR Civil, Pg.-TW-3 , It-15]
6
3252
19512
... More
Supply and delivery of M.S .Centre guide (Special Type).
[Ref. PHED SOR Civil, Pg.-TW-3 , It-16]
72
950
68400
... More
Supply and delivery of Washed gravels size ranging from 1.80 mm to 4.74 mm. conforming to IS 4097 : 1967
[Ref. PHED SOR Civil, Pg.-TW-3 , It-17]
67.2
3810
256032
... More
Electro-logging charge.
[Ref. PHED SOR Civil, Pg.-TW-3 , It-19]
6
15715
94290
... More
Lowering the tube well assembly (UPVC Casing pipe ,well pipe, strainer along with UPVC accessories) vertically in a position with proper lowering arrangement by applying necessary jointing compound including labour cost for subsequent gravel packing and machine operation cost etc.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-4]
6
26571
159426
... More
Cost of Consumables for drilling rigs and machineries.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-5]
6
22077
132462
... More
Development (Min. 8 Hr. continuous) of tube well by using suitable air compressor (Min. Capacity: 600CFM & operating Pressure 14 Bar) followed by yield testing with BHT pump (Head :45 to 50mtr.,Discharge :1100 to 1000 LPM and 25 BHP engine) all complete including To & Fro Transportation cost and Cost of fuels, lubricants & Labour etc.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-6]
6
56908
341448
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming
to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239
(Part - I)
Nipple (300 mm long ) 200 mm
6
681
4086
... More
Water sample collection and chemical test including Arsenic Test.
[Ref. PHED SOR Civil, Pg.-TW-2 , It-7]
6
2425
14550
... More
Transportation cost of drilling equipment and accessories rig machine etc. including cost of fuel,Lubricant & loading unloading the materials from store/stack yard /suppliers godown and unloading /stacking the same at site. (Upto 60.0 km distance.)
[Ref. PHED SOR Civil, Pg.-TW-2 , It-8]
6
59786
358716
... More
Supply and delivery of Bentonite Powder conforming to IS 6186 :1986 [Ref. PHED SOR Civil, Pg.-TW-3 , It-18]
12
13963
167556
... More
Add GST @ 18%
1
1205844
1205844.84
... More
Add labour welfare cess @ 1%
1
79049
79049.82
... More
For Zone No.-1,2 and 3 , Pump Room Number 1 Nos for each zone, total PR are 3 nos.
-
-
-
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
156.33
119
18645.48
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)-by fine sand
69.82
711
49683.21
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
199.49
24
4787.76
... More
I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) in ground floor & foundation
(a) 1:3:6 proportion, a) Pakur Variety
17.29
5442
94094.6
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. a) Pakur Variety
81.08
5750
466223.78
... More
Brick work with 1st class bricks in cement mortar (1:6)
(a) In foundation and plinth
19.98
4919
98298.8
... More
(b) In Superstructure ground floor
73.13
5142
376097.35
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
106.65
77
8269.64
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4mm, using approved scout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, columns, lintels, beams etc. curved or straight, including fitting, fixing and striking out after completion of works (upto roof of ground floor).
(f) 25 mm to 30 mm shuttering without staging in foundation
115.02
205
23579.1
... More
a) 25 mm to 30 mm thick wooden shuttering as per decision and direction of the Engineer-in-Charge.
383.84
328
125899.52
... More
Reinforcement for reinforced concrete work in all sort of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placking in proper position and binding with 16 gauge black annealed wire at every inter- section, complete as per drawing and direction.
a) For works in foundation, basement and upto roof of ground floor upto 4 mtr.
7.95
61639
490036.89
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
36
273
9828
... More
125mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor.
56.43
674
38052.44
... More
Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary / white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 Kg /Sq.m. all complete including all
materials and labour.In ground floor. 3 mm thick topping (High polishing grinding on this
item is not permitted) with ordinary cement.
a) 25 mm thick
123.6
256
31744.19
... More
Neat cement punning about 1.5mm thick in wall, dado, window, sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
468
32
15312.96
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking outs joints or roughening of concrete surface by chamfering etc. including throating, nosing and drip course
where necessary (Ground floor). Excluding cost of chipping over concrete surface]
i) With 1:6 cement mortar a) 15mm thick plaster.
365.23
141
51672.74
... More
b) 20mm thick plaster.
435.08
162
70761.41
... More
ii) With 1:3 cement mortar, a) 10mm thick plaster.
162.54
126
20558.06
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local
0.56
71907
40267.92
... More
Panel shutter for door and window as per design (Each panel consisting of single plank without joint)including fitting & fixing the same in position but excluding the cost of hinge and other fitting in Ground Floor(In case of non supply of single plank,penal rate of reduction of 20% will be made) 40 mm thick shutters with 19 mm thick pane of size 30 to 45 cm. sishu/Gamar/Champ/Badam/Bhola/Mogra/Hallak
12.6
2968
37396.8
... More
Supplying fitting approved type ventilator in position after cutting holes in walls,setting in cement mortar,mending damages to wall and plaster and two coats of paint of approved brand sand shade .Payment of mending two damages of wall & plaster and painting to be made separately.
R.C.C. ventilator of 20 mm thick - upto 0.10 sq.m. area
36
108
3888
... More
Supplying fitting, fixing- Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.
[The extra rate admissible for the openable portion only] (p-82,i-33)
17.28
2199
37998.72
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials
15.12
1320
19958.4
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
2.76
10021
27657.96
... More
White washing including cleaning and smoothening surface thoroughly. (c) Three coats (on new works only).
527.77
20
10560.68
... More
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (i) Two coats.
435.08
49
21318.92
... More
(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
25.2
38
957.6
... More
(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
34.56
29
1002.24
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)
25.2
75
1890
... More
(b) On steel or other metal surface :(with any shade except white), With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)
34.56
72
2488.32
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid
(a) 40mm X 6mm, 250mm Length
36
29
1044
... More
Iron butt hinges of approved quality fitted and fixed with steel crews, with ISI mark.
(i) 75mm. X 47mm. X1.70mm.
36
31
1116
... More
(iii) 100mm. X 58mm. X 1.90mm.
24
47
1128
... More
(A) Iron door ring of approved quality fitted and fixed with nut and washer complete.a) 50 mm dia.
12
17
204
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.-204/74 fitted and fixed with (i) 150mm long x 10mm dia. bolt.
36
63
2268
... More
(ii) 225mm long x 10mm dia. bolt.
12
84
1008
... More
i) Iron hasp bolt of approved quality fitted and fixed
complete (oxidised) with 16mm dia rod with centre bolt and round, (a) 200mm long.
6
134
804
... More
Iron catch hook of approved quality fitted and fixed to shutter and chowkat.a) 6mm dia x 225 mm long.
48
64
3072
... More
Supplying , fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.b) with 75mm iron Butt-hinge
48
35
1680
... More
125mm long wooden buffer block, i) With Sal siliguri
48
53
2559.84
... More
R.C. shelves (1:1.5:3)) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8 % main and 0.2% distribution bars), shuttering etc. and 6 mm. thick cement plaster (4:1) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages necessary complete. In ground floor (b) 37.5 mm thick panels . SAIL/TATA/RINL
6
1049
6294
... More
Add GST @ 18%
1
399554
399554.34
... More
Add labour welfare cess @ 1%
1
26193
26193
... More
For Zone No.-4 and 7 , Pump Room Number 4Nos for each zone, total PR are 8 nos.
-
-
-
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
208.44
119
24860.64
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)-by fine sand
93.1
711
66249.03
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
265.98
24
6383.52
... More
I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) in ground floor & foundation
(a) 1:3:6 proportion, a) Pakur Variety
23.05
5442
125441.33
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. a) Pakur Variety
108.11
5750
621650.88
... More
Brick work with 1st class bricks in cement mortar (1:6)
(a) In foundation and plinth
26.64
4919
131065.07
... More
(b) In Superstructure ground floor
97.5
5142
501428.85
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
142.2
77
11026.19
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4mm, using approved scout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, columns, lintels, beams etc. curved or straight, including fitting, fixing and striking out after completion of works (upto roof of ground floor).
(f) 25 mm to 30 mm shuttering without staging in foundation
153.36
205
31438.8
... More
a) 25 mm to 30 mm thick wooden shuttering as per decision and direction of the Engineer-in-Charge.
511.79
328
167867.12
... More
Reinforcement for reinforced concrete work in all sort of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placking in proper position and binding with 16 gauge black annealed wire at every inter- section, complete as per drawing and direction.
a) For works in foundation, basement and upto roof of ground floor upto 4 mtr.
10.59
61639
652766.12
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
48
273
13104
... More
125mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor.
75.24
674
50736.59
... More
Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary / white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 Kg /Sq.m. all complete including all
materials and labour.In ground floor. 3 mm thick topping (High polishing grinding on this
item is not permitted) with ordinary cement.
a) 25 mm thick
164.8
256
42325.58
... More
Neat cement punning about 1.5mm thick in wall, dado, window, sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
624
32
20417.28
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking outs joints or roughening of concrete surface by chamfering etc. including throating, nosing and drip course
where necessary (Ground floor). Excluding cost of chipping over concrete surface]
i) With 1:6 cement mortar a) 15mm thick plaster.
486.98
141
68897.93
... More
b) 20mm thick plaster.
580.11
162
94349.09
... More
ii) With 1:3 cement mortar, a) 10mm thick plaster.
216.72
126
27410.75
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local
0.74
71907
53211.18
... More
Panel shutter for door and window as per design (Each panel consisting of single plank without joint)including fitting & fixing the same in position but excluding the cost of hinge and other fitting in Ground Floor(In case of non supply of single plank,penal rate of reduction of 20% will be made) 40 mm thick shutters with 19 mm thick pane of size 30 to 45 cm. sishu/Gamar/Champ/Badam/Bhola/Mogra/Hallak
16.8
2968
49862.4
... More
Supplying fitting approved type ventilator in position after cutting holes in walls,setting in cement mortar,mending damages to wall and plaster and two coats of paint of approved brand sand shade .Payment of mending two damages of wall & plaster and painting to be made separately.
R.C.C. ventilator of 20 mm thick - upto 0.10 sq.m. area
48
108
5184
... More
Supplying fitting, fixing- Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.
[The extra rate admissible for the openable portion only] (p-82,i-33)
23.04
2199
50664.96
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials
20.16
1320
26611.2
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
3.69
10021
36977.49
... More
White washing including cleaning and smoothening surface thoroughly. (c) Three coats (on new works only).
703.7
20
14081.04
... More
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (i) Two coats.
580.11
49
28425.39
... More
(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
33.6
38
1276.8
... More
(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
46.08
29
1336.32
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)
33.6
75
2520
... More
(b) On steel or other metal surface :(with any shade except white), With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)
46.08
72
3317.76
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid
(a) 40mm X 6mm, 250mm Length
48
29
1392
... More
Iron butt hinges of approved quality fitted and fixed with steel crews, with ISI mark.
(i) 75mm. X 47mm. X1.70mm.
48
31
1488
... More
(iii) 100mm. X 58mm. X 1.90mm.
32
47
1504
... More
(A) Iron door ring of approved quality fitted and fixed with nut and washer complete.a) 50 mm dia.
16
17
272
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.-204/74 fitted and fixed with (i) 150mm long x 10mm dia. bolt.
48
63
3024
... More
(ii) 225mm long x 10mm dia. bolt.
16
84
1344
... More
i) Iron hasp bolt of approved quality fitted and fixed
complete (oxidised) with 16mm dia rod with centre bolt and round, (a) 200mm long.
8
134
1072
... More
Iron catch hook of approved quality fitted and fixed to shutter and chowkat.a) 6mm dia x 225 mm long.
64
64
4096
... More
Supplying , fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.b) with 75mm iron Butt-hinge
64
35
2240
... More
125mm long wooden buffer block, i) With Sal siliguri
64
53
3413.12
... More
R.C. shelves (1:1.5:3)) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8 % main and 0.2% distribution bars), shuttering etc. and 6 mm. thick cement plaster (4:1) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages necessary complete. In ground floor (b) 37.5 mm thick panels . SAIL/TATA/RINL
8
1049
8392
... More
Add GST @ 18%
1
532739
532739.1
... More
Add labour welfare cess @ 1%
1
34924
34924
... More
For Zone No.-5 and 6 , Pump Room Number 3Nos for each zone, total PR are 6 nos.
-
-
-
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
156.33
119
18645.48
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)-by fine sand
69.82
711
49683.21
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
199.49
24
4787.76
... More
I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) in ground floor & foundation
(a) 1:3:6 proportion, a) Pakur Variety
17.29
5442
94094.6
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. a) Pakur Variety
81.08
5750
466223.78
... More
Brick work with 1st class bricks in cement mortar (1:6)
(a) In foundation and plinth
19.98
4919
98298.8
... More
(b) In Superstructure ground floor
73.13
5142
376097.35
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
106.65
77
8269.64
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4mm, using approved scout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, columns, lintels, beams etc. curved or straight, including fitting, fixing and striking out after completion of works (upto roof of ground floor).
(f) 25 mm to 30 mm shuttering without staging in foundation
115.02
205
23579.1
... More
a) 25 mm to 30 mm thick wooden shuttering as per decision and direction of the Engineer-in-Charge.
383.84
328
125899.52
... More
Reinforcement for reinforced concrete work in all sort of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placking in proper position and binding with 16 gauge black annealed wire at every inter- section, complete as per drawing and direction.
a) For works in foundation, basement and upto roof of ground floor upto 4 mtr.
7.95
61639
490036.89
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).
36
273
9828
... More
125mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor.
56.43
674
38052.44
... More
Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary / white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 Kg /Sq.m. all complete including all
materials and labour.In ground floor. 3 mm thick topping (High polishing grinding on this
item is not permitted) with ordinary cement.
a) 25 mm thick
123.6
256
31744.19
... More
Neat cement punning about 1.5mm thick in wall, dado, window, sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
468
32
15312.96
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking outs joints or roughening of concrete surface by chamfering etc. including throating, nosing and drip course
where necessary (Ground floor). Excluding cost of chipping over concrete surface]
i) With 1:6 cement mortar a) 15mm thick plaster.
365.23
141
51672.74
... More
b) 20mm thick plaster.
435.08
162
70761.41
... More
ii) With 1:3 cement mortar, a) 10mm thick plaster.
162.54
126
20558.06
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local
0.56
71907
40267.92
... More
Panel shutter for door and window as per design (Each panel consisting of single plank without joint)including fitting & fixing the same in position but excluding the cost of hinge and other fitting in Ground Floor(In case of non supply of single plank,penal rate of reduction of 20% will be made) 40 mm thick shutters with 19 mm thick pane of size 30 to 45 cm. sishu/Gamar/Champ/Badam/Bhola/Mogra/Hallak
12.6
2968
37396.8
... More
Supplying fitting approved type ventilator in position after cutting holes in walls,setting in cement mortar,mending damages to wall and plaster and two coats of paint of approved brand sand shade .Payment of mending two damages of wall & plaster and painting to be made separately.
R.C.C. ventilator of 20 mm thick - upto 0.10 sq.m. area
36
108
3888
... More
Supplying fitting, fixing- Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.
[The extra rate admissible for the openable portion only] (p-82,i-33)
17.28
2199
37998.72
... More
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials
15.12
1320
19958.4
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
2.76
10021
27657.96
... More
White washing including cleaning and smoothening surface thoroughly. (c) Three coats (on new works only).
527.77
20
10560.68
... More
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (i) Two coats.
435.08
49
21318.92
... More
(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
25.2
38
957.6
... More
(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
34.56
29
1002.24
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)
25.2
75
1890
... More
(b) On steel or other metal surface :(with any shade except white), With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)
34.56
72
2488.32
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid
(a) 40mm X 6mm, 250mm Length
36
29
1044
... More
Iron butt hinges of approved quality fitted and fixed with steel crews, with ISI mark.
(i) 75mm. X 47mm. X1.70mm.
36
31
1116
... More
(iii) 100mm. X 58mm. X 1.90mm.
24
47
1128
... More
(A) Iron door ring of approved quality fitted and fixed with nut and washer complete.a) 50 mm dia.
12
17
204
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.-204/74 fitted and fixed with (i) 150mm long x 10mm dia. bolt.
36
63
2268
... More
(ii) 225mm long x 10mm dia. bolt.
12
84
1008
... More
i) Iron hasp bolt of approved quality fitted and fixed
complete (oxidised) with 16mm dia rod with centre bolt and round, (a) 200mm long.
6
134
804
... More
Iron catch hook of approved quality fitted and fixed to shutter and chowkat.a) 6mm dia x 225 mm long.
48
64
3072
... More
Supplying , fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.b) with 75mm iron Butt-hinge
48
35
1680
... More
125mm long wooden buffer block, i) With Sal siliguri
48
53
2559.84
... More
R.C. shelves (1:1.5:3)) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8 % main and 0.2% distribution bars), shuttering etc. and 6 mm. thick cement plaster (4:1) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages necessary complete. In ground floor (b) 37.5 mm thick panels . SAIL/TATA/RINL
6
1049
6294
... More
Add GST @ 18%
1
399554
399554.34
... More
Add labour welfare cess @ 1%
1
26193
26193
... More
BOUNDARY WALL 40 MTR EACH With ONE NUMBER Gate for Tube well At Zone -1,2&3 Size -(10 X 10) Sqm
-
-
-
... More
Earth work in excavation of foundation trenches or drains. in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing. Spreading or stacking the spils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches. leveling. dressing and ramming the bottom. bailing out water as required complete. Depth of foundation upto 1500mm
191.29
119
22815.16
... More
Earth work & filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and raming etc. layer by layer complete.(Payment to be made on basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
162.2
77
12576.99
... More
Cement concrete with graded stone ballast ( 40 mm size excluding shuttering)
In ground floor
1:3:6 proportion, [Pakur Variety]
8.3
5442
45169.76
... More
Supplying and laying Polythene Sheet (150gm / Sq.M) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
153.78
24
3690.72
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety.N.B. Variety ,Ground Floor
40.27
5750
231559.35
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thckness with required bracing for concrete slabs , beams, m columns , lintels curved or straight including fitting , fixing and striking out after completion of works (upto roof of ground floor) . (f) 25 mm to 30 mm shuttering without staging in foundation upto plinth
75.28
205
15432.4
... More
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work, Ground Floor
273.98
363
99454.74
... More
Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods , initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge balck annealed wire at every intersection, complte as per drawing and direction
Tor steel/Mild Steel SAIL/ TATA/RINL For works in foundation, basement and upto roof of ground floor/upto 4 m,Ground Floor
2.82
61639
173824.41
... More
125mm thick brick work with 1st class bricks in cement mortar(1:4) in different floors.Ground Floor
258.48
674
174300.82
... More
Plaster (to wall , floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of of concrete surface , including throating , nosing and drip course where necessary, b) 15 mm thick plaster (Internal) 1:6,Ground floor
727.46
141
102921.04
... More
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.
(iii) Two coats. Ground floor
727.46
49
35645.54
... More
Priming one coat on steel and metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
39.08
29
1133.32
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessar On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white)
39.08
79
3087.32
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc
I) For structural members of specified sections weighing less than 22.5 Kg./m
0.17
74571
12677.07
... More
(a) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary. Payment to be made on the length of individual lines of wire.)
360
27
9964.8
... More
Estimate of Gate
M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
Grill weighing above 16 Kg./sq.mtr and above
3.6
11524
41486.94
... More
Add GST @ 18%
1
177378
177378.09
... More
Add labour welfare cess @ 1%
1
11322
11322.09
... More
Electro - Mechanical work for New 2 nos deep tube well in zone I
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH c) 10 HP to 15 HPinclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8c.
2
350000
700000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
2
94666
189332
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
40
327
13080
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
18
163
2947.86
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
2
1791
3582
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
4
559
2237.2
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
2
380
760.6
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
2
800
1600
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
2
1031
2062
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
4
250
1000
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
6
152
912
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
2
1830
3660.8
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
16
343
5488
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
2
5000
10000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
2
7574
15148
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
2
655
1310
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
12
173
2076
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
12
169
2028
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
30
319
9570
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
10
78
780
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
4
674
2696
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
2
1375
2750
... More
S&F at site of TW single board size 14" x 16".
4
61
246
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
8
29
232
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
8
84
672
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
2
84
168
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
4
4218
16875
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
2
1938
3876
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
16
742
11872
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
2
2018
4036
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
6
1786
10720.8
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
4
170
680
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
20
20
400
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
24
490
11760
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
24
287
6888
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
2
920
1840
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
30
114
3420
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
37106
2226360
... More
Electro - Mechanical work for New 2 nos deep tube well in zone II
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH b) 6 HP tp 10 HPinclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8b.
2
275000
550000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
2
94666
189332
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
40
327
13080
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
18
163
2947.86
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
2
1791
3582
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
4
559
2237.2
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
2
380
760.6
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
2
800
1600
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
2
1031
2062
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
4
250
1000
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
6
152
912
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
2
1830
3660.8
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
16
343
5488
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
2
5000
10000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
2
7574
15148
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
2
655
1310
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
12
173
2076
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
12
169
2028
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
30
319
9570
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
10
78
780
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
4
674
2696
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
2
1375
2750
... More
S&F at site of TW single board size 14" x 16".
4
61
246
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
8
29
232
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
8
84
672
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
2
84
168
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
4
4218
16875
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
2
1938
3876
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
16
742
11872
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
2
2018
4036
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
6
1786
10720.8
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
4
170
680
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
20
20
400
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
24
490
11760
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
24
287
6888
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
2
920
1840
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
30
114
3420
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
37106
2226360
... More
Electro - Mechanical work for New 2 nos deep tube well in zone III
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH b) 6 HP tp 10 HPinclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8b.
2
275000
550000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
2
94666
189332
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
40
327
13080
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
18
163
2947.86
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
2
1791
3582
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
4
559
2237.2
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
2
380
760.6
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
2
800
1600
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
2
1031
2062
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
4
250
1000
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
6
152
912
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
2
1830
3660.8
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
16
343
5488
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
2
5000
10000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
2
7574
15148
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
2
655
1310
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
12
173
2076
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
12
169
2028
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
30
319
9570
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
10
78
780
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
4
674
2696
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
2
1375
2750
... More
S&F at site of TW single board size 14" x 16".
4
61
246
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
8
29
232
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
8
84
672
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
2
84
168
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
4
4218
16875
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
2
1938
3876
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
16
742
11872
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
2
2018
4036
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
6
1786
10720.8
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
4
170
680
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
20
20
400
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
24
490
11760
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
24
287
6888
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
2
920
1840
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
30
114
3420
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
37106
2226360
... More
Electro - Mechanical work for New 4 nos deep tube well in zone IV
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH c) 11 HP to 15 HP inclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8c.
4
350000
1400000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
4
94666
378664
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
80
327
26160
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
36
163
5895.72
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
4
1791
7164
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
8
559
4474.4
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
4
380
1521.2
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
4
800
3200
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
4
1031
4124
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
8
250
2000
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
12
152
1824
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
4
1830
7321.6
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
32
343
10976
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
4
5000
20000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
4
7574
30296
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
4
655
2620
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
24
173
4152
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
24
169
4056
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
60
319
19140
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
20
78
1560
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
8
674
5392
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
4
1375
5500
... More
S&F at site of TW single board size 14" x 16".
8
61
492
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
16
29
464
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
16
84
1344
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
4
84
336
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
8
4218
33750
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
4
1938
7752
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
32
742
23744
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
4
2018
8072
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
12
1786
21441.6
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
8
170
1360
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
40
20
800
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
48
490
23520
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
48
287
13776
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
4
920
3680
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
60
114
6840
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
111318
6679080
... More
Electro - Mechanical work for New 3 nos deep tube well in zone V
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH c) 11 HP to 15 HP inclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8c.
3
350000
1050000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
3
94666
283998
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
60
327
19620
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
27
163
4421.79
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
3
1791
5373
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
6
559
3355.8
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
3
380
1140.9
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
3
800
2400
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
3
1031
3093
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
6
250
1500
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
9
152
1368
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
3
1830
5491.2
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
24
343
8232
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
3
5000
15000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
3
7574
22722
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
3
655
1965
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
18
173
3114
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
18
169
3042
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
45
319
14355
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
15
78
1170
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
6
674
4044
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
3
1375
4125
... More
S&F at site of TW single board size 14" x 16".
6
61
369
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
12
29
348
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
12
84
1008
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
3
84
252
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
6
4218
25312.5
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
3
1938
5814
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
24
742
17808
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
3
2018
6054
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
9
1786
16081.2
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
6
170
1020
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
30
20
600
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
36
490
17640
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
36
287
10332
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
3
920
2760
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
45
114
5130
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
74212
4452720
... More
Electro - Mechanical work for New 3 nos deep tube well in zone VI
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH c) 11 HP to 15 HP inclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8c.
3
350000
1050000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
3
94666
283998
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
60
327
19620
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
27
163
4421.79
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
3
1791
5373
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
6
559
3355.8
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
3
380
1140.9
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
3
800
2400
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
3
1031
3093
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
6
250
1500
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
9
152
1368
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
3
1830
5491.2
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
24
343
8232
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
3
5000
15000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
3
7574
22722
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
3
655
1965
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
18
173
3114
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
18
169
3042
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
45
319
14355
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
15
78
1170
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
6
674
4044
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
3
1375
4125
... More
S&F at site of TW single board size 14" x 16".
6
61
369
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
12
29
348
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
12
84
1008
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
3
84
252
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
6
4218
25312.5
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
3
1938
5814
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
24
742
17808
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
3
2018
6054
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
9
1786
16081.2
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
6
170
1020
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
30
20
600
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
36
490
17640
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
36
287
10332
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
3
920
2760
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
45
114
5130
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
74212
4452720
... More
Electro - Mechanical work for New 4 nos deep tube well in zone VII
-
-
-
... More
Supply & delivery of pumping machinery submersible pump excluding panel for unmanned operation, MK-Texmo/KSB/MBH c) 11 HP to 15 HP inclusive of column pipe, valves special submersible cable connection from motor to starter. Ref - PHED SCHEDULE GUIDELINE, Pg No - 37, Sr No - 8c.
4
350000
1400000
... More
Supply, Delivery & installation of 415 V. 3 Phase 50 hz Auto-manual 20 KW Star Delta starter Control Panel for Sub P/M Set (as per enclosed details) Mk-Selwin/Electromech /AC Power /Equivalent as per direction of EIC. Ref - MEMO No.- 1170/KMDA/ EM/ V7 dt.: 18/12/19
4
94666
378664
... More
Supply, Delivery at site 1.1 KV grade Al armoured cable of size 3.1/2 core 35 sq mm confirming to 1554/7098(PT) 1988 Mk-Havel or equivalent. Ref - KMDA Vetted.
80
327
26160
... More
Supply of Insulating rubber mat of size 3' x 6'.Ref - Same as above.
36
163
5895.72
... More
Supply & delivery of 1200 mm sweep AC Ceiling Fan (Orient PSPO, Summer cool/ New bridge) without regulator with all accessories. Ref - Same as above.
4
1791
7164
... More
S & F MS top clamp 12 x 80 mm section for Submersible P/M Set in two halves. Ref - Same as above.
8
559
4474.4
... More
S & F of safety clamp for the P/M Set 6 mm x 40 mm section. Ref - Same as above.
4
380
1521.2
... More
S & F of pressure gauge of range 0-10 kg/cm2 with cock and allied acessories. Ref - Same as above.
4
800
3200
... More
S&F of Split type M.S fabricated suitable tube well cover for the tube well with necessary clamping arrangement including holes for column pipe, air pipe & cable entry. Ref - Same as above.
4
1031
4124
... More
Construction of supporting pillar supporting platform for the resting of valves for easy operation with neat cement finish as per direction of EIC.Ref - Same as above.
8
250
2000
... More
Supply, painting of best quality weather thermal resistance paint of approved quality with two coats with necessary smoothening of surface and application primer incl. material, labour and hire charge of tools & paints etc all complete. Ref - Same as above.
12
152
1824
... More
S & F of protecting device comprising of wire rope clamps etc. Ref - Same as above.
4
1830
7321.6
... More
Flange joint to CI/DI/MS pipes and specials incl supply of rubber gasket, nuts, bolts, washers etc of quality to make the joint water tight as req. for hydraulic pressure and direction of EIC. Ref - Same as above.
32
343
10976
... More
Installation of pumping machinery with valves, pipe & pipe specials short piece, depth gauge, pressure gauge including hoisting of column pipe. making all electrical and water line inter- connection complete as per direction including supply of necessary materials as req.for the work. Ref - Same as above.
4
5000
20000
... More
Supplying and fixing sheet steel main switch on angle iron frame on wall 100/125 amp 415 V TPN with fuse on L & N Make-Havells/ Flora/ Legrand/ Siemens.
4
7574
30296
... More
Supplying and fixing sheet steel main switch on flat iron frame on wall 15/16 amp, 240 V DP with fuse on L & N Make-Havells/Flora/ Legrand/ Siemens.
4
655
2620
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC cable for 3 1/2 core upto 35 sq mm. Ref - PWD 2014, Pg No F4, Sr - 7d.
24
173
4152
... More
Finishing end of XLPE/PVC armoured cables by crimping method incl. Supplying fixing solderless socket(dowels make), tapes, anti corrosive paste & jointing materials 35 sq mm 3.1/2 core. Ref - PWD 2014, Pg No F5, Sr - 8b xv.
24
169
4056
... More
Laying of two cables upto 35 sq mm in underground trench in single tire formation (horizontal) the trench size 680 mmx 760 mm average depth, with brick protection on the top of the each cable with 8 (eight) nos per mtr and 4(four) nos bricks per mtr as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. Ref - PWD 2014, Pg No F2, Sr - 2a.
60
319
19140
... More
Laying of cable upto 3/3.5 core 35 sq mm - 50 sq mm on wall/surface incl. S&F MS saddle with earthing attachment in 2x10 SWG GI (hot dip) wire making holes etc. as necessary mending good damages and painting. Ref - PWD 2014, Pg No F1, Sr - 2c.
20
78
1560
... More
Supply & Fixing bulkhead light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceilling incl. 8 Watt CFL/100watts GLS lamp complete set. Ref - PWD 2014, Pg No D13, Sr - 23.
8
674
5392
... More
Supplying & fixing of 250 V, 4' long 40 W single/double FL Tube light fittings complete with all accessories incl. FL. Tube (Phillips make). TMC 055 2 x TL-D 36 W LED.
4
1375
5500
... More
S&F at site of TW single board size 14" x 16".
8
61
492
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making using for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14a.
16
29
464
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. Ref - PWD 2014, Pg No E5, Sr - 14b.
16
84
1344
... More
Supply & Fixing 240 V, 20 A Plug Socket (Brand approved by EIC) without plug top and switch on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex cover and making necessary connections with PVC wire and earth continuty wire etc. Ref - PWD 2014, Pg No E5, Sr - 15b.
4
84
336
... More
Supply, delivery, testing and commissioning of LED type 60 W street light luminaries including LED lamp etc all complete. Mk- Phillips/C.G or any reputed make as per direction of EIC. Ref - Green City.
8
4218
33750
... More
Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. Ref - PWD 2014, Pg No D13, Sr - 28.
4
1938
7752
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5) sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/ bakelite top cover on wall incl. necy, connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface). Average run 6 mtr. Ref - PWD 2014, Pg No E11, Sr - 2b.
32
742
23744
... More
Supply of fabricated MS Kiosk made from 14 SWG MS Angle incl. Providing Al busbar of 60 A rating for main supply transmission with proper stamping and to be fixed on pedestal as per direction of EIC.
4
2018
8072
... More
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts. double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By TATA- Medium GI pipe. Ref - PWD 2014, Pg No G1, Sr - 2a.
12
1786
21441.6
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. Ref - PWD 2014, Pg No G2, Sr - 4a.
8
170
1360
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Ref - PWD 2014, Pg No G2, Sr - 5a.
40
20
800
... More
Supply, delivery at site and storage of glowing plastic sign board for identification mark as per direction of EIC.
48
490
23520
... More
Erection of glowing plastic sign board for identification mark as per direction of EIC.
48
287
13776
... More
Supply & fixing, fitting of lightning arrestor/conductor of G.I stick of size 1x5 Mtr long x 25 mm dia with G.I flange at bottom of size 75 X 75 x 5 mm thk.with copper discharge points including grouting by cement morter 1:4 as per direction of EIC.
4
920
3680
... More
Connecting the equpments/body to earth busbar including S&F 25 mmx6mm galvanised (Hot Dip) M.S flat on wall/ floor with GI shaddles as required and making connection to equipments with bolts, nuts and washers etc.
60
114
6840
... More
Supply and Installation of Injector/Diaphragm type Automatically Chlorinator for feeding controlled dosages of chlorine solution in pumping delivery line. i) capacity 0 - 100 lph, 10 kg /cm2 test pressure. Ref - PHED SCHEDULE GUIDELINE, Pg No - 38, Sr No - 10.
1
150000
150000
... More
Operation & Maintenance of the whole Installation for the period of five Years (after trial run) deploying adquate number of working personnel for round the clock operation as per requiremnt, specification &direction of E.I.C. Ref - Labour Commission rate
60
111318
6679080
... More
Add GST @ 18% on EM
1
7228753
7228753.67
... More
Add labour welfare cess @ 1% on EM
1
473695
473695.61
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%