Ministry Of Road Transport And Highways Tender

TackCoat:- Providing and applying tack coat with Cationic bitumen emulsion(RS1 ) complying with IS:8887 using emulsion pressure distributoron the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure airjet (ReferencetoMORT&H'sspecification clause 503). i))On bituminous surface @ 0.20kg-0.3kg /sqm.

Bituminous Concrete Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of approved grade@ 5.2% (min) for Gr.-1 & @ 5.4% (min) for Gr.-2 , as per table 500-17, and mix design done as per table 500-10 and job mix formula as per cl. 505.3.3 and filler(Cement /hydrated lime / Rock dust ), transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory tandem roller and with pneumatic tyre roller of 12 to 15 tonne weight with a pressure at least 0.56 MPa as directed by E-I-C to achieve the desired compaction as per clause no 507.3.5 complete in all respects ref. to MORTH specification clause No.507. ii) for Grading-2 ( 13.2 mm nominal maximum aggregate size), Layer thickness:30-40mm

Retro-Reflectorised Traffic Signs:-Providing and fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3,fixed over aluminium sheeting,1.5mm thick,when signs with maximum sided imensions do not exceed 600mm,or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm,supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). (i) 90 cm Circular