Military Engineer Services Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date23 Nov 2024
Closing Date14 Dec 2024
Tender Amount₹ 28,10,000
Costs
EMD
₹ 56,200Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_685357_1Tender No
8566/BKP/AF OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of cement concrete (reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including reinforcement cut as required to facilitate demolition and removing debries from site of work all as specified and directed.
7
-
-
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish from the site complete all as specified and directed.
120
-
-
Taking down chowkhats with shutter (without taking of shutter from the frame) n.exc.1.5 Sqm each and removing from site complete all as specified and directed.
8
-
-
Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and removing from site complete all as spd and directed.
2
-
-
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
65.15
-
-
Excavating over areas n exc1.5 m deep and getting out in soft/losse soil complete all as specified and directed.
7.5
-
-
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cess pits man holes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
75.33
-
-
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
38.15
-
-
Removing excavated material to a distance exc 250m but n. exc 500 meter and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
8.75
-
-
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point as in soft/loose soil complete all as specified and directed.
38.1
-
-
Materials and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
4.73
-
-
Material and labour for hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
6.48
-
-
Material and labour for hardcore of broken stone or boulder of gauge exc. 63 mm but n.exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
1.05
-
-
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
8.43
-
-
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
1.4
-
-
Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.
0.2
-
-
Materials and labour for 40mm thick damp proof course in cement concrete (1:2:4), type B-0 (12.5mm graded stone aggregate) with WPC as per manufactures instructions to horizontal or vertical
surfaces including necessary formwork and polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed.
5.65
-
-
Material and labour for PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
1.2
-
-
Material and labour for reinforced cement concrete (1:1.5:3) (nominal mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
3.53
-
-
Material and labour for reinforced cement concrete (1:1.5:3) (nominal mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
1.39
-
-
Material and labour for reinforced cement concrete (1:1.5:3) (nominal mix) (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
0.32
-
-
Material and labour for reinforced cement concrete nominal mix (1:1.5:3) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs/ cover slab of manhole/ grease traps and in shelves and the like etc. complete all as specified and directed.
0.7
-
-
Supply only liquid water proofing compound (WPC) complete all as specified and directed.
5.97
-
-
Material and labour for brick work with fly ash brick, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
39.05
-
-
Materials and labour for half brick thick brick work with fly ash bricks old size straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.
3.4
-
-
Cutting chases, pinning in existing brick wall and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
20
-
-
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.
19.56
-
-
Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions with rough finished square, rectangular or polygonal surface of concrete complete all as specified and directed.
22.2
-
-
Use and waste of form work to to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.
4.32
-
-
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed.
5.2
-
-
Use and waste of formwork to edges of concrete
flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finished surfaces of concrete complete all as specified and directed.
13.1
-
-
Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
10
-
-
Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.
4
-
-
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part–II (2020) complete all as specified and directed.
10
-
-
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
3
-
-
Supply and fix 125mm size stainless steel butt hinges medium weight complete all as specified and directed.
15
-
-
Suplly and fix 200 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed.
8
-
-
Supply and fix 200mm size aluminium alloy D type handles, fabricated type extruded section complete all as specified and directed.
8
-
-
Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.
2
-
-
Supply and fix brass Mortice lock, 4 lever vertical type, size 100 mm complete all as specified and directed.
2
-
-
Supply and fix 150mm long floor door stopper of aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
2
-
-
Supply and fix door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for aluminium door shutters of any size etc complete all as specified and directed.
2
-
-
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
8
-
-
Supply and fix 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work or in aluminum clips/ beadings of any description complete all as specified and directed.
2
-
-
Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
50
-
-
Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
30
-
-
Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.
15
-
-
Supply and fix framed mild steel work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
658.3
-
-
Material and labour for rolled mild steel sections as in framing for man hole cover supports, cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming to Fe.290.Gde-E-165 complete all as specified and directed.
662
-
-
Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
537.51
-
-
All as per item No 53.00 above but 5mm dia and over upto and including 10mm dia for stirrups, spacer, binders and -ditto-.
46.6
-
-
Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed.
720
-
-
Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, with riveted, bolted or welded attachment conforming to Fe-290 (Gde-E- 165 ) complete all as specified and directed.
47.1
-
-
Supply and fix 20mm diameter of neck mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 15cm but n. exc 30 cm long complete all as specified and directed.
15
-
-
Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed.
193.46
-
-
Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed.
10.72
-
-
Supply and fix structural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde E-250) of quality-A complete all as specified and directed.
450
-
-
Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe-410 (Gde E-250 quality-A complete all as specified and directed.
50
-
-
Material and Labour for providing stainless steel strainer made of perforated stainless steel sheet of grade-304 having minimum thickness of 16 gauge, of size-600x450x75mm (approx), made to shape with supporting frame work using suitable size of SS flats or bars with provision of SS handle of required size, removeable basket type (for easy handling in placing and removal on daily basis) fixed / placed in position at ground sunk / where required complete all as specified and directed.
15
-
-
Supply and fix mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
205
-
-
Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carring capacity with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long cross tee of section size 24 x30mm 1200mm/600mm long and wall angle of section size 20x20mm. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 4mm dia G.I. wire from perlins/soffits. 6mm thick high pressure steam cured Everest non Asbestos fibre cement designer ceiling board (density 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.
Note: Work shall be executed through authorised applicator of OEM as approved by GE.
Make: Armstrong/ Saint Gobain/ Lafarge/ Everest.
40
-
-
Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
1
-
-
Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
4
-
-
Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth with using extra cement complete all as specified and directed.
35
-
-
Material and labour for 50mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth with using extra cement complete all as specified and directed.
18.15
-
-
Material and labour cement concrete 100 mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) as in wearing course of floors of ramp and finishing concrete surface by spike rolling on newly concreted surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
3.6
-
-
Material and labour cement concrete 100 mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) as in foundation of transformer complete all as specified and directed.
7
-
-
Material and labour for 75mm thick PCC (1:3:6), type C-2, (using 40mm graded stone aggregate) as in sub base of floor and pavings etc complete all as specified and directed.
52.3
-
-
Material and labour for 75mm thick PCC (1:4:8), type D-2, (using 40mm graded stone aggregate) as in sub base of floor and pavings etc complete all as specified and directed.
31.5
-
-
Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in base course/ levelling course for laying floor finishes complete all as specified and directed.
31.8
-
-
Material and labour for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in base course/ levelling course for laying floor finishes complete all as specified and directed.
50
-
-
Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in levelling base course on wall including necessary formwork complete all as specified and directed.
10
-
-
Material and labour for 40mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) with using water proofing coumpound (WPC) @ 200ml per 50kg bag of cement or as per manufacturers instruction as in floor including finishing the concrete surface even and smooth with using extra cement complete all as specified and directed.
Note : WPC will be measured and paid separately under respective item.
2.2
-
-
Material and labour for machine cut Kota stone slab flooring 20-25mm thick over 20mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
34.1
-
-
All as per item No 77.00 above but 18 to 20mm thick in skirting and dado laid over and including 15mm thick rendering in cement mortar (1:4) and -ditto-.
0.5
-
-
Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, centre top and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
2
-
-
Material and labour for vitrified ceramic tiles (premium quality) 8 to 9mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
40
-
-
All as per item No 80.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-.
2
-
-
Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
26
-
-
Material and labour for glazed ceramic tiles of size 450x350x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.
37.5
-
-
Material and labour for 10mm thick dubbing out plaster on irregular face of walls / ceiling and rough finished in cement mortar (1:4) including GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.
4
-
-
Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
80
-
-
Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
6.3
-
-
Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
21.78
-
-
Material and labour for 20mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing coumpound (WPC) @ 200ml per 50kg bag of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Note : WPC will be measured and paid separately under respective item.
53.75
-
-
Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing coumpound (WPC) @ 200ml per 50kg bag of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Note : WPC will be measured and paid separately under respective item.
174.1
-
-
Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.
91.78
-
-
Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.
80
-
-
Materials and labour for complete removal of existing treatment on walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including preperation of surface complete all as specified and directed.
80
-
-
Materials and labour for applying 2mm thick wall care putty including rubbing etc to achieve smooth surface complete all as specified and directed.
150
-
-
Material and labour for preparation of new plastered surfaces of walls and applying two coats of Acrylic smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming one coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.
53.75
-
-
Material and labour for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
2.1
-
-
Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
90.6
-
-
Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint (camouflage patteren) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed.
80
-
-
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed.
45
-
-
Material and labour for writing letters or figures / Numericals (Block, Roman, Italic or Indian) not exc. 30 cm high with synthetic enamel paint complete all as specified and directed.
12
-
-
Material and labour for preparation of new steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
0.5
-
-
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of fire resisting paint over one coat of red oxide zinc chrome primer complete all as specified and directed.
54.95
-
-
Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beadings, clips, aluminium beadings in aluminium frame in square/rectangle n. exc 0.5 sqm in each pane complete all as specified and directed.
8
-
-
Supply and fix 4mm thick sheet figured glass, pinhead type and glazing with oil putty or rubber beadings, clips, aluminium beadings in aluminium frame etc in square n. exc 0.5 sqm in each pane complete all as specified and directed.
1
-
-
Supply and fix 5.50mm thick sheet glass, ordinary quality with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and glazing with oil putty or rubber beadings, clips, aluminium beadings in aluminium frame in square/rectangle exc 0.5 sqm in each pane complete all as specified and directed.
8
-
-
Material and labour for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to 110 mm bore drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
15
-
-
Supply and fix in repair 125mm stainless grating doom with waste hole complete all as specified and directed.
4
-
-
Supply and fix in repair 125mm PTMT grating doom with waste hole (minimum weight 40gms) complete all as specified and directed.
5
-
-
Supply and fix 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.
2
-
-
Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
2
-
-
Supply and fix in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall or laid in floor complete all as specified and directed.
9
-
-
Supply and fix in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.
15
-
-
Supply and fix 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.
18
-
-
Supply and fix in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
3
-
-
Supply and fix 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
2
-
-
Supply and fix in repair cast Iron floor trap with grating of 75 mm dia outlet including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 (using 20mm graded stone aggregate) complete all as specified and directed.
1
-
-
Supply and fix in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or fixed to wall complete all as specified and directed.
9
-
-
Supply and fix 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
10
-
-
Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and directed
2
-
-
Supply and fix 20mm dia tubular towel rail 600mm long of brass chromium plated with end brackets complete all as specified and directed.
2
-
-
Supply and fix in repair 15mm bore fancy type sink tap, regular spout with flange cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
3
-
-
Supply and fix waste fittings 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
3
-
-
Supply and fix in repair 15 mm bore CP fancy type stop valves/angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both,ends for iron pipe or for unions and fixed complete all as specified and directed.
6
-
-
Supply and fix in repair 15mm bore long body, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
6
-
-
Supply and fix in repair 32 mm dia PVC waste pipe of 800 mm long complete all as specified and directed.
7
-
-
Supply and fix PVC connection pipe 15 mm size with PTMT nuts at both ends of length 600 mm complete all as specified and directed.
6
-
-
Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
2
-
-
Supply and fix soap dish, brass chromium plated, fancy type complete all as specified and directed.
2
-
-
Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and directed.
2
-
-
Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
2
-
-
Supply and fix in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.
2
-
-
Supply and fix vitreous china urinals, Half stall type, white flat back of size 590x390x375 (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), incl CP waste coupling and CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.
2
-
-
Supply and fix in repair counter top oval shaped vitreous china white Wash Hand Basin of size 560mmx410mm fixed to granite/marble top slab, including cutting for and pinning in including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in red lead cement, 32mm dia PVC waste pipe including 15mm dia fancy type chromium plated cast copper alooy long body (swan neck type) Pillar tap with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and directed.
2
-
-
Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and dismantling of old unseviciable existing tank complete all as specified and directed.
2
-
-
Supply and fix 32mm dia low density polyethylene
(LDPE) pipes of pressure rating 6 kgf/sqcm and fixed to walls, ceilings, roofs or laid in floors or laid in trenches complete all as specified and directed.
30
-
-
Supply and fix 50 mm dia high density polyethylene
(HDPE) pipes of pressure rating 6 kgf/sqcm and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.
15
-
-
Supply and fix sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
3
-
-
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.
32
-
-
Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.
28.4
-
-
Laying / fixing only 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
Note;- Serviciable GI pipe shall be refixed under this item obtained from item No 136.00 after taking up/ down.
3.6
-
-
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.
20
-
-
Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed.
20
-
-
Supply and fix 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
2
-
-
Supply and fix looking mirror of size 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
2
-
-
Supply and fix stainless steel 25mm dia curtain rod fancy type with side end holder with stainless steel brackets fixing on brick/concrete wall with screws complete all as specified and directed.
30
-
-
Material and labour for flame proof light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing flame proof switch with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor cable of 1100 volts grade as earth continuity wire and connected to earth dolly complete all as specified and directed.
Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
4
-
-
All as per item No. 145.00 here-in-before but for 15 amps socket outlet with 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dully and -ditto-.
2
-
-
Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor cable of 1100 volts grade as earth continuity wire and connected to earth dolly and including taking down old unserviceable existing point wiring with all fixtures such as switches, sockets etc.complete all as specified and directed.
Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
8
-
-
All as per item No. 147.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.
5
-
-
All as per item No. 147.00 here-in-before but for one five pins 5 Amps switch socket outlet point on same board and -ditto-.
1
-
-
All as per item No. 147.00 here-in-before but for metal clad industrial socket with 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.50 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dolly and -ditto-.
3
-
-
Supply and fix switch piano one way 5/6 amps 240 volts, single pole complete all as specified and directed.
9
-
-
Supply and fix switch socket combination 2 in 1, 5 pin , 5 amps flush type complete all as specified and directed.
5
-
-
Supply and fix switch socket combination 5 in 1, 5/15 amps socket complete all as specified and directed.
3
-
-
Supply and fix socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.
1
-
-
Supply and fix ceiling rose, 3 terminals, fabricated of PVC / Polycarbonate, isolated body complete all as specified and directed.
6
-
-
Supply and fix flameproof switch LM6 body, rotary switch, SP, 16 Amps , IP66 protection die cast aluminium alloy for ON/OFF light / fan point to operate on single phase 230 Volts, AC with termination box certified by CIMFR and PESO certified IS-2145 complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.
4
-
-
Material and labour for flame proof flexible metalic hose conduit 20mm dia 300mm long for exhaust fan/ flame proof light fitting connection from ceiling rose complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.
4
-
-
Supply and fix sheet metal enclosure SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, metal door IP-43 type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
1
-
-
Supply and fix in repair sheet metal enclouser SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with 200 Amp rated bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
1
-
-
Supply and fix MCB SPN, 240 Volts, 40 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.
1
-
-
Supply and fix in repair MCB SPN, 240 Volts, 40 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.
1
-
-
Supply and fix MCB SP, 240 Volts, of 16 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.
2
-
-
Supply and fix in repair MCB SP, 240 Volts, of 16 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.
2
-
-
Supply and fix flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P + earth complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.
2
-
-
Supply and fix industrial plug and socket type DB 20 Amps capacity with provision of single pole 20 amps MCB, 'C' series 10KA plug top and earth plug, complete all as specified and directed.
1
-
-
Supply and fix in repair LED lights fittings with extruded aluminium housing, high quality PC diffuser, efficacy- 125lm/W, 20 watt, 4 feet long, 220V, AC, 6500K, CRI ≥80, integrated design including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.
Make:- Crompton /Wipro / Philips/ GE.
3
-
-
Supply and fix in repair 36 W recessed LED ceiling light with white powder coated CRCA housing with high translucent frosted diffuser and driver inbuilt 4KV surge protection, 5700 K, efficacy 110 lm/W, power factor-0.95, CRI≥80, suitable for 600 x 600 mm (2 feet x 2 feet) grid ceiling complete with all accessories including internally prewired connecting upto flexible copper conductor cable of suitable size complete all as specified and directed.
Make:- Crompton /Wipro / Philips/ GE.
2
-
-
Supply and fix flame proof / weather proof LED 2 x 20W, 4 feet, 230 V tube light fitting with lumen output not less than 4000 Lumens, body made out of cast aluminium alloy LM6 construction certified by CIMFR, BIS & PESO including suitable electronic including necessary fixing arrangements and connecting up complete all as specified and directed.
Make: Sudhir /Bajaj/ Crompton Greaves.
4
-
-
Supply and fix 300mm sweep steel body exhaust fan AC single phase 230/240 volt. 1400 RPM, heavy duty, ISI marked, along with metal blade powder coated metalic finish with louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and as directed.
Make : Crompton Greaves /HAVELLS/ ORIENT/ USHA.
1
-
-
Supply and fix ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. minimum air delivery 210 CFM with service value 6.00 BEE. 5 star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Make : Crompton Greaves /HAVELLS/ ORIENT/ USHA.
1
-
-
Supply installation testing and commissioning of Electric storage water heater (rust and shock proof body) with attractive looks and corrision resistance inner tank having capacity 50 ltr, 5 star rated with multi function safety valve , heating element, indicating lamps etc all as per following specifications:- (a) Power / Input : 8.7 Amp, 230 V, 50 Hz (b) Rated Power input in KW : 2 KW (c) Maximum rated Pressure : 8 Bar (0.8 Mpa) (d) Storage Capacity : 50 ltr (e) Installation type : Wall mounted Vertical (f) Mean Hot Water Outlet - 75 degree celcius (g) Mixing factor - 30 % maximum (h) Water Proof degree - IP x 4 (j) Class of appliance - Class-I (k) Heating element : Incoloy glass coated heating element, superior heating performance with excellent resistance to both oxidation and carbonization at high temperature setting . Resists corrosion against extreme and hard water conditions with minimum energy loss.
1
-
-
(l) Inner container : It shall be Feroglass coating, made of ultra thick super cold rolled steel plates with superior corrosion resistance and ' anti-rust property'. (m) Anode rod - The tank has an anode rod with a stainless steel core. (n) Insulation : CFC free thicker PUF insulation. (o) Star Rating : 5 Star from BEE complete all as specified and directed. Make : Bajaj/ USHA/ AO Smith/ Havells/ Crompton
-
-
-
Materials and labour for cutting, welding, bending of MS flat iron of size 30x3mm for making clamps of required shap and size as per site condition including nut & bolts and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.
0.1
-
-
Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by 15 mm bore HDPE pipe of pressure rating 6 kgf/cm2 including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x5 cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion complete all as specified and directed.
Note:- GI wire upto 7.5m length including testing shall be included in quoted rates.
1
-
-
Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by 40 mm bore HDPE pipe of pressure rating 6 kgf/sqcm all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 6cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 15 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion complete all as specified and directed.
Note:- GI strip upto 7.5m length including testing shall be included in quoted rates.
4
-
-
Material and labour for aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.
Note : Joining of aluminium strip shall be made by brazing/soldering.
59
-
-
Supply and fix porcelain insulator for supporting or passing of earthing strip from roof / wall including necessary nuts and bolts complete all as specified and directed.
72
-
-
Material and labour for air termination single pointed aluminium rod,12mm dia and 300mm long including necessary fixing arrangment using clamps,nuts and nuts complete all as specified and directed.
2
-
-
Material and labour for test point termination box made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos, 8 mm dia, 25mm long hexagonal heads screw for lighting conductors complete all as specified and directed.
2
-
-
Supply and fix thermoplastic enclosure box of size 300x150x170mm with opaque lid fasteners for tool operation protection of IP-66 for fixing of test point terminal box complete all as specified and directed.
Make:- HENSEL / SINTEX / C&S
2
-
-
Supply installation, commissioning and testing including providing all necessary electrical connection, LT feeder pannel boad (CPRI Approved), outdoor type, factory made out of 3.15 mm thick MS sheet of size 0.60 m x 0.60 m x 0.5 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom complete including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1 upto a height of 0.5 mtr from ground level, with danger notice plate of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete and comprising of the following accessories including necessary excavation work for taking out cable loop and refilling the trenches complete all as specified and directed.
(a) Anodized Copper bus bar of capacity 100 Amp -04 Nos
(b) MCCB 25 Amp Thermal magnetic protection type, 415 Volts 4 pole, 16 KA - 01 No (Incoming)
(c ) MCCB 25 Amp Thermal magnetic protection type, 415 Volts 4 pole, 16 KA - 01 No (Outgoing)
1
-
-
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 10 Sqmm, 2 core, 1100 Volts , confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed.
Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
75
-
-
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 16 Sqmm, 2 core, 1100 Volts, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed.
Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
45
-
-
Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 16 Sqmm, 4 core, 1100 Volts , confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed.
Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.
80
-
-
Disconnecting DG set 20 KVA including disconnecting of earthing lead, unscrewing nuts, bolts and washers, lifting the DG set 20 KVA from one location within 4 KM radius and place the DG on foundation at another location and installation, commissioning , testing including providing all necessary electrical connection complete all as specified and as directed.. Note :-
(a) The arrangment of hydra/JCB for shifting the DG set within 4 KM radius is included in the quoated rate.
(b) The contractor will be fully responsible for any physical damage to the DG during shifting.
1
-
-
Supply and fix on load change over switch (SS enclosure) of capacity 40 Amp, 415 Volt, 4 pole, 50 HZ complete all as specified and as directed..
2
-
-
Materials and labour for boring of holes of size 40mm dia under road without disturbing the top surface of the road and taxiway for passing through the cable complete all as specified and directed Note-Necessary infrastructure required for boring shall by arranged by the contractor and cost of the same included in quoted rates.
9
-
-
Materials and labour for boring of holes of size 50mm dia under road without disturbing the top surface of the road and taxiway for passing through the cable complete all as specified and directed Note-Necessary infrastructure required for boring shall by arranged by the contractor and cost of the same included in quoted rates.
4
-
-
Material and labour for sand cushioning with clean and dry river sand for protection of UG cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and directed. Note:- Punned down thickness shall be measured for payment.
10
-
-
Material and labour for brick protection cover to underground cables with sub class ‘B’ bricks of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat complete all as specified and directed.
1536
-
-
Supply and fix galvanised iron pipe 40 mm bore (dia) ‘Light Grade’ for protection of UG Cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed.
9
-
-
Materials and labour for 25mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 with all fittings for passing of cable through PCC foundation from trench to cable junction box/ DB complete all as specified and directed.
17
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%