Military Engineer Services Tender

Taking down Shutters of any description area exc 1 sqm and n.exc 2.0 sqm for each leaf and refixing in same opening after cutting, adjusting and easing all as specified and directed

S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square complete all as specified and directed.

S&F for 28 to 30 mm thick (stiles) Factory Made Solid PVC Moulded Door Shutter, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2010 complete all as specified and directed.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.)

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.)

S&F for 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and directed.

All as per item no. 7 here-in-before but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as speified and directed.

S&F for Powder coated anodised aluminium door shutters with powder coating not less than 50 micron of any colour, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F for powder coated anodised aluminium frame for doors and partition wall with one or more rebates including joining cleat for fixing etc. with powder coating not less than 50 micron of any colour complete all as specified and directed by Engineer-in-Charge

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement as specified and direction by Engineer-in-charge.

M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290, Gde E-165 complete all as specified and directed.

M&L for PCC (1:2:4) type B-0, (using 12.5mm graded stone agregate) as in bands, bed blocks, fixing hold fasts, filling of door fames etc complete including necessary formwork complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned tacks, or stainless steel wire staples in steel windows/ wooden doors complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty/beads and pins/spring pins in squares n . exc 0.50 sqm in each pane to be fixed in any position at any hight upto to two story building after hacking out broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old galzing pins/ spring clips complete all as specified and directed.

S&F for 3 mm thick figured glass pin headed type and glazing with oil putty/beads and pins/spring pins in squares n . exc 0.50 sqm in each pane to be fixed in any position at any hight upto to two story building after hacking out broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old galzing pins/ spring clips complete all as specified and directed.

S &F for aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F for 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F for 150 mm long aluminium alloy handles, cast type, anodized complete all as specified and directed.

S&F for 100 mm long Butt hinges (medium weight) mild steel complete all as specified and directed.

S & F for 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S &F for 3 ways sliding anodised aluminium (powder coated) glazed window shutter with frame with the following specification (a) Frame 50 mm x 65 mm x 1.5 mm Thick (b) 35 mm x 35 x 1.5 mm Z section in stiles, rails (c) 35 mm x 35 mm x 1.5 mm T section mullion (d) two shutter with PVC gasket with 4 mm thick tinted glass, including aluminium handles with necessary locking arrangement and one shutter with stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc as directed by Engr-in-Charge.

S&F for Powder coated anodised aluminium ventilator shutters and frame, (half fixed glass and half louvers) aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing lips, rubber lips, rubber packing anodized aluminium snap beading, screws, grills anodized aluminium snap beading, screws, grills anodized aluminium fittings such as peg stays 150mm long (3 Nos), Hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) etc. The vetilator system should be glazed with 4mm thick figured glass, pin head type of size as required in ventilator including taking out/ taking down old shutters complete all as specifed and directed.

S&F for aluminium beading inculing gasket etc (fixing in existing aluminium door shutter) complete as in repairs all as specified and directed.

M&L for 18/19mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work duly fixing of 0.9mm thick decorative laminate type-1 of surface finished, colour and pattern as approved fixed with approved adeshive as per manufacturer instruction prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with external 6mm thick teak wood lipping after dismantling boarding of any description in any position with nailscomplete all as specified and directed.

M&L for 0.9mm thick decorative laminate type-1 of surface finished, colour and pattern as approved fixed with approved adeshive as per manufacturer instruction over plywood, other wood surface etc. after dismantling of old unservicable lamination complete all as specified and directed by the Engineer-in-Charge.

S&F for 100 mm long Butt hinges (medium weight) stainless steel complete all as specified and directed.

S&F for 100 mm handles (rectangular shalpe) stainless steel polished bright complete all as specified and directed.

S&F for 25mm dia cutain rails, stainless steel with fixing brackets, stops, tollers etc. including side caps and brackets complete as in repair all as specified and directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (when open) is 40 mm complete as in repair all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish after preparation of new plaster surfaces of wall complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for complete removal of existing treatment of walls by washing down and smoothing old surface and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for vitrified tiles dark shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick backing layer of cement plaster in cement mortar (1:4) after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

M&L for vitrified tiles dark shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick screed bed in cement mortar (1:4) after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premisescomplete all as specified and as directed.

S&F for kitchen cabinet (colour) of depth 300mm made with 18mm thick PVC celluca plywood board (pre-laminated with 5mm thick PVC sheet), one side decorative lamination and other side balancing lamination sheet (white) consisting of carcass 18mm thick PVC sheet and provision of shutter made out of 18mm thick one side decorative lamination PVC sheet all required brackets, stainless steel screw, knobs, kinges, favi quick, solvent cement etc. fixed to wall with stainless steel screw and 18mm thick PVC shelves of density not less than 600 kg/cum by drilling holes complete. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification all as directed by Enigneer-in-Charge. (Note: colour, quality and make approved by GE and cost of all materials and labours including in this item)

S&F for kitchen cabinet (colour) of depth 600mm made with 18mm thick PVC celluca plywood board (pre-laminated with 5mm thick PVC sheet), one side decorative lamination and other side balancing lamination sheet (white) consisting of carcass 18mm thick PVC sheet and provision of shutter made out of 18mm thick one side decorative lamination PVC sheet all required brackets, stainless steel screw, knobs, kinges, favi quick, solvent cement etc. fixed to wall with stainless steel screw and 18mm thick PVC shelves of density not less than 600 kg/cum by drilling holes complete. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification all as directed by Enigneer-in-Charge. (Note: colour, quality and make approved by GE and cost of all materials and labours including in this item)