Military Engineer Services Tender

Materials and labour for rendering 20mm thick in two layers of 10 mm thick each in cement mortar (1:4) on fair faces of brick work or concrete surfaces,WPC shall be mixed with morter of top layer, finished even and fair, complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only)

Supply only liquid Water Proofing Compound of approved make.

Materials and labour for applying three coats of white wash on new wall surface including preparation of surface, complete all as specified and directed.

Materials and labour for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion of approved colour with roller over one coat of primer over 1-2 mm thick wall care putty of approved make complete all as specified and directed.

Materials and labour for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion of approved colour with roller over a coat of chalk whitening of approved make complete all as specified and directed.

Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of chalk whitening on wall complete all specified and directed.

Materials and labour for applying two or more coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm /litre and UV resistant as per IS 15489:2004 alkali and fungal resistant exterior paint of required shed(company depot tinted) with silicon additives1.43 lits/10 sqm over and including primer coat of exterior primer applied 0.90 litre/10 sqm over a coat of 1mm thick putty over new plastered surface to prepare the surface even and smooth complete all as specified and directed .

Materials and labour for preparation of new/old plastered surfaces of wall and applying 1mm thick wall care putty of approved make complete all as specified and directed.

Materials and labour for finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of interior primer applied @ 2.20kg/10 sqm complete all as specified and directed.

Materials and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Materials and labour for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Materials and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and and applying one coat of distemper oil emulsion of approved colour and approved make with roller complete all as specified and directed.

Materials and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and and applying one coat of cement based paint of approved colour and approved make with roller complete all as specified and directed.

Materials and labour for for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and applying one coat of antifungal exterior emulsion paint (as per manufacturer instructions) complete as specified and directed.

Materials and labour for complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion of approved colour and approved make with roller over a coat of over a coat of chalk whitening complete all as specified and directed.

Materials and labour for complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulsion of approved colour and approved make with roller over one coat of primer over 1-2 mm thick wall care putty complete all as specified and directed.

Materials and labour for complete removal of existing treatment from wall surfaces and applying two coats of cement based paint of approved colour and approved make with roller over a coat of over a coat of chalk whitening complete all as specified and directed.

Materials and labour for preparing of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for preparing of old painted steel surfaces of any description not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Materials and labour for preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed including cleaning/removal of vegetation/ plant growth from fencing. .

Materials and labour for preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed including cleaning/removal of vegetation/ plant growth from fencing. .

Materials and labour for re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete as specified and directed.

Materials and labour for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 250 liters n.exc 500 liters complete all as specified as directed.

Materials and labour for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 500 liters n.exc 1000 liters complete all as specified as directed.

Materials and labour for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 1000 liters n.exc 2000 liters complete all as specified as directed Note for item No. 26.00, 27.00 & 28.00 (i) On completion of cleaning of tank, date of cleaning to be marked/written clearly on tank surface in an accessible location with letters or figures n.exc 5 cm high viz (as per example) "TANK CLEANED ON………….". "NEXT DUE ON ............................" (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank. (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the Contractor and the quoted rates are deemed to include for the same..

Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr complete all as specified and as directed

Dismantling PVC/HDPE/plastic water tank of capacity Exc 500 Litre and not Exceeding 1000 Ltr complete all as specified and directed

Dismantling PVC water tank of capacity Exc 1000 Litre and not Exceeding 2000 Ltr complete all as specified and as directed

Supply & fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position, connecting with existing pipes all as specified in SSR Part I complete all as specified and directed.

Supply & fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position, connecting with existing pipes all as specified in SSR Part I complete all as specified and directed.

Supply & fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 Ltr capacity hoisted and fixed in position, connecting with existing pipes all as specified in SSR Part I complete all as specified and directed.

Supply and fixing in repair 20 mm bore nipple suitable for HDPE water tank (Minimum weight 45gms) complete all as specified and directed.

Supply and fixing in repair 25 mm bore nipple suitable for HDPE water tank (Minimum weight 65gms) complete all as specified and directed.

Supply and fixing in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum 20mm-210gms) complete all as specified and directed.

Supply and fixing in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum 25mm-455gms) complete all as specified and directed.