Military Engineer Services Tender

Supply , installation , testing and commissioning of chlorine feed high pressure dozing pump with accessories having flow rate of 25 LPH, discharge pressure 15 Kgs/cm2, pump type reciprocal gear operated and fitted with motor 0.5 HP, 1440 RPM and liquid chlorine dozing system consisting of 100 ltr FRP tank with lid, port hole, inlet/outlet/drain connection, level guage etc sludge collection facility and fitted with high speed motor with agitator including lead tubing, connecting ferrules, injection check valves, clay weight and ferrules, stator control cabling etc including drilling and making connection in main line and making fixing arrangement including taking out u/s dozing pump and remove from site complete all as specified and directed.Make : M/s Sathya Sai Aqua Pura Services / M/s Pristine Water. Note: Unsv dozing pump shall be deposited in MES store yard of AGE E/M Sevoke Road.

S & F in repair 15 mm bore steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls, or in floors, in old/new situation complete all as specified

S&F in repair 15mm bore Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply, erection, testing and commissioning KIOSK Indoor type LT feeder pillar box made out of 2.00 mm thick CRCA sheets, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos Copper bus bar for distribution system and partition with 1.6mm CRCA sheet, fabricated in factory having modern fabrication and testing facility which includes seven (07) tanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032. complete LT Panel including. Bus Bar 100 amp rated copper bus bar TPN duly insulated with coloured(Size of feeder pillar shall not be less than 1.5mx0.6mx0.9m). Panel should be designed in such a way to accomodate starter easily in panel. Including following accessories:- INCOMING : (i) 4 pole MCCB having breaking capacity 16 KA of rating 63 Amps. - 01 No. (ii) Change over switch 63 Amps 4 pole - 01 Nos. OUTGOINGS : (i) MCCB, 4 pole, 'C' curve, 10 KA of rating 40 Amps. - 01 No (ii) MCB, TPN, 'C' curve, 10 KA of 32 Amps. - 02 Nos (iii) Fully automatic submersible pump controller star delta starter of capacity 15 HP with feature of protection from overload single phasing, phase reversal, phase imbalance, auto restart with indication of On/Off, voltage and amps (iv) MCB, SPN, 'C' curve, 10 KA of rating 20 Amps. - 01 No. (v) Motor protection relay-01 No. (vi) Single phase preventer relay-01 No. INSTRUMENTATION SYSTEM :-(i) Digital Voltmeter 96 mm x 96 mm including selectror switch suitable to read 0 volt to 500 volts (AC 50 Hz), Class-1.0 - 01 No. (ii) Digital Ammeter 96 mm x 96 mm with suitable CT - 01 set (iii) LED Pilot Lamp (for Incomers) suitable for 230/240 Volts AC supply complete with integral circuit & cluster LED of following colours : (i) RED - 01 No, YELLOW - 01 No, BLUE - 01 No. (iv) Danger Notice Plate duly written in Signal Red colour on Aluminium plate in English & Hindi language and of size not less than 150mm x 100mm - 02 No. Note : (i) Cost of PCC 1:3:6 for foundatin and platform is included in the quoted rate. (ii) Incoming & outgoing MCCB shall be connected wih busbar.

S & F in repair fully automatic star delta submerssible pump controller with feature of protection from overload single phasing, phase reversal, phase imbalance, auto restart with indication of On/Off, voltage and amp in sheet metal enclosure MU-G15 type Make: L & T Cat Part CS94091SODO or equivalent from list of make for 15 HPMotor RELAY RANGE 13-22A 415V, 50Hz, 3phase all as specified and directed by Engr-in-Charge

Supply, laying, jointing & testing galvanized iron tubing 100m bore medium grade with all fittings such as bends, elbow,tee, socket, reducers, unions etc as required at site laid in trenches including taking out u/s pipe and remove from site complete all as specified and directed.

S&F in repair flat submersible motor cable, three core, copper conductor of size 6.0 Sqmm, including providing necessary connection and testing on completion complete all as specified and directed.

M&L for P.C.C. 1:4:8 Type D-2, (using 40mm graded stone aggregate) as in foundation of poles,stays,struts or any other indicated work including form work(if required) complete all as directed by Engr-in-Charge

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Supply, installtion, commissioning and testing multi stage submersible pump set having capacity not less than 400 lpm discharge at a head of 70 meter, with bronze impeller, directly coupled with motor suitable for 100mm bore column pipe, motor rating 15 HP, pump type three phase 415 volts , 50 Hz complete all as specified and directed. Make- KSB/Kirloskar/crompton greaves

Supply, installtion, commissioning and testing multi stage submersible pump set having capacity not less than 300 lpm discharge at a head of 70 metre, with bronze impeller, directly coupled with motor suitable for 100mm bore column pipe, motor rating 10 HP pump type three phase 415 volts , 50 Hz complete all as specified and directed. Make- KSB/Kirloskar/crompton greaves

Supply, installtion, commissioning and testing multi stage submersible pump set having capacity not less than 160 lpm discharge at a head of 50 meter, with bronze impeller, directly coupled with motor suitable for 50mm dia column pipe, motor rating 6 HP, pump type three phase 415 volts , 50 Hz complete all as specified and directed. Make- KSB/Kirloskar/cromptongreaves

Supply only column pipe 100 mm bore galvanized iron heavy grade, 3 meter in length & both ends long threaded, including provision of heavy duty coupling/socket 100mm bore complete all as specified and directed.

Supply only column pipe 50 mm bore galvanized iron heavy grade, 3 meter in length & both ends long threaded, including provision of heavy duty coupling/socket 50mm bore complete all as specified and directed.

M&L for taking up/lifting of defective submersible motor and pump assembly complete of any type/size of 15 HP with unserviceable cable of any capacity from deep tube/borewell (of any depth) after providing lifting tools and tackles complete as required at site, carefully disconnecting of all electric connections, water connections in and including dismantling of column pipe lines shaft ( of any size and length stage by stage) and keeping them aside under safe custody for reuse (after repairing of the pump and motor assembly) at site complete all as specified and directed by Engr-in-charge. Note: New column pipe will be measured and paid separately.

M&L for lowering of new submersible motor and pump assembly complete of any type/size of 10 HP capacity with submersible cable of anymake and size complete in deep tube/borewell of any depth coupling with pump and motor, in and including connecting and lowering of column pipe line shaft of any size and length (stage by stage) carefully with the help of necessary tools and tackles, including providing PVC insulated steel rope (stranded) of 8 mm dia, duly fixed with the motor pump set U bolts and clamps of size fixed on the clamps for mechanical support for the motor pump set anchoring outside the borewell of suitable length reconnecting of all electric and water connections with new nuts bolts washers and rubber gasket and testing on load upto the entire satisfaction of engr-in-Charge complete all as specified and directed. Note: New column pipe will be measured and paid separately.

M&L for taking up/lifting of defective submersible motor and pump assembly complete of any type/size of 6 HP capacity with unserviceable cable of any capacity from deep tube/borewell (of any depth) after providing lifting tools and tackles complete as required at site, carefully disconnecting of all electric connections, water connections in and including dismantling of column pipe lines shaft ( of any size and length stage by stage) and keeping them aside under safe custody for reuse (after repairing of the pump and motor assembly) at site complete all as specified and directed by Engr-in-charge. Note: New column pipe will be measure and paid separately.

M&L for lowering of new submersible motor and pump assembly complete of any type/size of 6 HP capacity with submersible cable of any make and size complete in deep tube/borewell of any depth coupling with pump and motor, in and including connecting and lowering of column pipe line shaft of any size and length (stage by stage) carefully with the help of necessary tools and tackles, including providing PVC insulated steel rope (stranded) of 8 mm dia, duly fixed with the motor pump set U bolts and clamps of size fixed on the clamps for mechanical support for the motor pump set anchoring outside the borewell of suitable length reconnecting of all electric and water connections with new nuts bolts washers and rubber gasket and testing on load upto the entire satisfaction of engr-in-Charge complete all as specified and directed. Note: New column pipe will be measured and paid separately.

Supply and fixing including lowering of steel wire rope, PVC insulated of size 10 mm dia of suitable size/length as directed with clamps, nuts & bolts and washers etc for holding column pipes/ GI pipes of submersible pump set complete all as directed by Engr-in-Charge.

Excavation in trenches for road cutting not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for laying/ taking out pipe line in any type of soil complete all as specified and directed

Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. Mechanical seal bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80mm to 200mm dia including taking out Unserviceable complete all as specified and directed

Supply, laying, jointing and testing of 150 mm bore Ductile iron (DI) , pressure pipes Centrifugally Cast (Spun) inside cement mortar lining duly ISI marked with Spigot & Socket end, Class K-9 conforming to IS:8329/2000 including (push-on) rubber gasket jointing laid in trenches complete all as specified and directed Engineer In Charge .

Cutting of existing cast iron/DI pipes upto 150 mm bore in any position for insertion and fitting of new Tee, Collar, Tail pieces etc for taking out connections, branch connections complete all as specified and as directed.

S & F cast iron sluice valve PN 1.6 150mm bore with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including fixed at any position all as specified and directed by Engr-in-Charge.

M & L for PCC (1:3:6) type C1 using 20mm graded aggregate for repair of road cutting all as specified and directed by Enginner- in -Charge

M&L for construction of valve chamber of size 1200mm x 1200mm x1200mm (internal dimensions) with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm thick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork,painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces, complete all as specified and as directed.

S & F submerssible pump set of Capacity, 2HP Delivery size 50mm, max solid size 35mm, single phase with 50mm PVC pipe of length -15 mtr with clamp 02 set complete all as specified and directed.

S&F flat submersible cable 3 core multi stranded copper conductor of size 4 sqmm.ISI marked complete all as specified and as directed.