Military Engineer Services Tender
... More
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Military Engineer Services - MES Tender
Eprocure
Opening Date21 Feb 2025
Closing Soon14 Mar 2025
Tender Amount₹ 10,49,00,000
AI Insights
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class 'S' or 'S' Class.
Bid Capacity
... View More
The bid capacity required in the given tender can be determined by the following formulas: For Contract sum exceeding Rs 10 lakh but not exceeding Rs 100 lakh: Rs 20,000 plus 2% of Contract Sum exceeding Rs 10 lakh, subject to a maximum of Rs 1,00,000. For Contract sum exceeding Rs 100 lakh: 1% of Contract sum, subject to a maximum of Rs 5 lakh. For works with a separate period of completion, the bid capacity is:
Four percent of the contract value of the Items or group of items of work, subject to a maximum of Rupees twenty-five lakhs, where the contract sum exceeds Rs 300 lakhs. These formulas are used to calculate the Earnest Money Deposit (EMD) or bid security.
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the cost of the works. For works costing over a certain amount, the bidder should have at least 5 years of practical experience as a Degree holder in Engineering, and at least 8 years of practical experience as a Diploma holder in Engineering. For works costing between certain amounts, the bidder should have at least 4 years of practical experience as a Degree holder in Engineering, or at least 6 years of practical experience as two Diploma holders in Engineering. For works costing between other amounts, the bidder should have at least 3 years of practical experience as a Degree holder in Engineering, or at least 5 years of practical experience as one Diploma holder in Engineering. For works costing between a lower range of amounts, the bidder should have adequate practical experience of works as a Degree or Diploma holder in Engineering. Additionally, for certain types of works, the bidder should have adequate practical experience of works as a competent person. The value and percentage of similar works completed are not explicitly stated in terms of specific years or amount. However, it is mentioned that bidders who are one class below the eligible class may be considered if they have "previously completed similar works satisfactorily" and meet certain criteria, including past experience of completed works and financial soundness. A maximum amount of Rupees twenty-five lakhs is mentioned, which is 4 percent of the contract value of the items or group of items of work for which a separate period of completion is given.
Costs
EMD
₹ 10,99,500Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_684622_2Tender No
89096/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Garage
1
3012726
-
... More
Lumpsum price worked out by the tenderer/ bidder for SITE CLEARENCE, AREA DEVELOPMENT, as listed in Schedule ‘A’ Part-II on Serial Page No. 33
1
5612365
-
... More
Lumpsum price worked out by the tenderer/ bidder for GARBAGE BIN as listed in Schedule ‘A’ Part-III on Serial Page No. 34
1
45217
-
... More
Lumpsum price worked out by the tenderer/ bidder for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV on Serial Page No. 35
1
430765
-
... More
Lumpsum price worked out by the tenderer/ bidder for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-V on Serial Page No. 36 to 40
1
2486372
-
... More
Lumpsum price worked out by the tenderer/ bidder for ROAD/PATH /CULVERT/ PAVED AREA as listed in Schedule ‘A’ Part-VI on Serial Page No. 41 to 44
1
2067444
-
... More
Lumpsum price worked out by the tenderer/ bidder for AREA DRAINAGE as listed in Schedule ‘A’ Part-VII on Serial Page No.45 & 46
1
979877
-
... More
Lumpsum price worked out by the tenderer/ bidder for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VIII on Serial Page No. 47 & 48
1
254753
-
... More
Lumpsum price worked out by the tenderer/ bidder for FENCING AND STEEL GATE as listed in Schedule ‘A’ Part-IX on Serial Page No. 49 to 51
1
501845
-
... More
Lumpsum price worked out by the tenderer/ bidder for RETAINING WALL as listed in Schedule ‘A’ Part-X on Serial Page No. 52 & 53
1
7568918
-
... More
Lumpsum price worked out by the tenderer/ bidder for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-XI on Serial Page No. 54& 55
1
649419
-
... More
Lumpsum price worked out by the tenderer/ bidder for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-XII on Serial Page No. 56 to 58
1
2258920
-
... More
Sch 'A' Part-XIII (MISC B&R AND E&M ITEMS) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
-
-
-
... More
ROAD/PATH/CULVERT
Approved earth from outside MoD land
25
-
-
... More
EXTERNAL WATER SUPPLY
Materials and Labour for Construction of brick masonary valve pit chamber of size 1.2 x 1.2 x 1.2 Mtr internal dimension using sub class-'B' bricks in CM (1:6) plastering in cement mortar (1:4) externally & internally extended to 15 cm below ground level including PCC bed 10 cm thick in PCC 1:3:6 Type C2 with MS frame fabricated by angle of size 40 x 40 x 6mm complete with top cover of 3 mm thick MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including demolition of old unserviceable damged valve pit complete all as specifed & directed.
2
-
-
... More
Materials and Labour Cutting / boreing of existing road / path, hardstanding etc and water pipe to protection with iron cover plate for passing cable or water pipe and making good the disturbed road top surfaces with following cement concrete all type, using of suitable depth and finished with speed breaker complete all as specifed & directed by Engineer-in-Charge.
120
-
-
... More
EXTERNAL ELECTRIC SUPPLY
Supply & Fixing PVC cable terminal boxes, outdoor type of size 155 mm x 210 mm x 92 mm with MCB SP 6 to 32 Amps including all necessary fittings and connection including one complete all as directed by the Engr-in-Charge.
5
-
-
... More
Suply install commissioning and testing floor mounted outdoor cubical type LT Feeder Pillar Box (CPRI tested and confirming to IEC61439 Part 1&2 ) of size 1800 x 1650 x900 fabricated out of 3.15 mm thick CRCA Sheet and angle iron 50 x 50 x 6 mm frame factory made totally enclosed dust and vermin proof both side hinge opening arrangement on front and back with locking arrangement cable entry and exit from bottom with cable glands and gaskets, Aluminium bus bar fixed on porcelin insulators with internal wiring with suitable size of Aluminium strips to be used for incoming and outgoing connection of all switches/MCCB'S & Bus -bar . of 300 Amp 4 WAY . Bus- bar shall be insulated with colour code sleeves/tapes and to be connected with Aluminium lugs, including two coats of synthetic enameled paint on the surface externally & internally over a coat of red oxide primer paint incl locking arrangements . necessary PCC (1:3 :6) TYPE C2 as in foundation all as directed , comprising of the followings: (LT Feeder pillar box should be powder coated colour)
1
-
-
... More
INCOMER :- (a) 200 Amp MCCB 4 Pole 35 KA - 01 No
OUTGOING:- (b) 63 Amp MCCB 4 Pole 16 KA - 03 Nos ( 02 working + 01 spare) (c) MCB TPN 63 Amps including street light timer system with ML2 contactor system.
(d) Bus bar 300 Amp 4 way.
(e) Digital type Ameter, range 0 to 630 Amp with slector switch and CT.
(f ) Digital type Ameter, range 0 to 500 Volt with slector switch and PT.
(g) Indicator lamp RYB.
-
-
-
... More
Suply install commissioning and testing floor mounted outdoor cubical type LT Feeder Pillar Box (CPRI tested and confirming to IEC61439 Part 1&2 ) fabricated out of 3.15 mm thick CRCA Sheet and angle iron 50 x 50 x 6 mm frame factory made totally enclosed dust and vermin proof both side hinge opening arrangement on front and back with locking arrangement cable entry and exit from bottom with cable glands and gaskets, Aluminium bus bar 4 Nos fixed on porceling insulators with internal wiring with suitable size of Aluminium strips to be used for incoming MCCB 200 A rating and outgoing connection of all switches / MCCB’s and Bus – Bar of 300 Amp 4 way. Bus- bar shall be insulated with colour code sleeves/tapes and to be connected with Aluminium lugs, including two coats of synthetic enameled paint on the surface externally & internally over a coat of red oxide primer paint incl locking arrangements . necessary PCC (1:3 :6) TYPE C2 as in foundation all as directed , comprising of the followings: (LT Feeder pillar box should be powder coated colour)
1
-
-
... More
INCOMER:- (a) 200 Amp MCCB 4 pole 35 KA - 01 No OUTGOING:- (b) Bus bar 300 Amp 4 way.
(c) Digital type Ameter, range 0 to 630 Amp with slector switch and CT.
(d) Digital type Ameter, range 0 to 500 Volt with slector switch and PT .
(e) Indicator lamp RYB .
-
-
-
... More
Supply & Fix two in one CP bip tap etc completed all as specified and directed.
22
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%